Instead, just encode the git repository information in the filename.
We want to make it much harder to make it match a real filename, but to
still allow easy browsing with the file manager interface. So the git
repository "filename" format is the path to the git repository
directory, with the branch name encoded as "[branch]" at the end rather
than the "path:branch" format that we used in the descriptor file.
[ For example, on Windows, a filename like "c:\my.xml" could be
interpreted as the branchame "\my.xml" in the repository in the
directory "c" ]
In particular, with this model, no filename that ends with ".xml" could
possibly ever be considered a git repository name, since the last
character of a git pathname is always ']'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So this is totally unrelated to the git repository format, except for
the fact that I noticed it while writing the git saving code.
The subsurface divetag list handling is being stupid, and has a
initial dummy entry at the head of the list for no good reason.
I say "no good reason", because there *is* a reason for it: it allows
code to avoid the special case of empty list and adding entries to
before the first entry etc etc. But that reason is a really *bad*
reason, because it's valid only because people don't understand basic
list manipulation and pointers to pointers.
So get rid of the dummy element, and do things right instead - by
passing a *pointer* to the list, instead of the list. And then when
traversing the list and looking for a place to insert things, don't go
to the next entry - just update the "pointer to pointer" to point to
the address of the next entry. Each entry in a C linked list is no
different than the list itself, so you can use the pointer to the
pointer to the next entry as a pointer to the list.
This is a pet peeve of mine. The real beauty of pointers can never be
understood unless you understand the indirection they allow. People
who grew up with Pascal and were corrupted by that mindset are
mentally stunted. Niklaus Wirth has a lot to answer for!
But never fear. You too can overcome that mental limitation, it just
needs some brain exercise. Reading this patch may help. In particular,
contemplate the new "taglist_add_divetag()".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This saves the dive data into a git object repository instead of a
single XML file.
We create a git object tree with each dive as a separate file,
hierarchically by trip and date.
NOTE 1: This largely duplicates the XML saving code, because trying to
share it seemed just too painful: the logic is very similar, but the
details of the actual strings end up differing sufficiently that there
are tons of trivial differences.
The git save format is line-based with minimal quoting, while XML quotes
everything with either "<..\>" or using single quotes around attributes.
NOTE 2: You currently need a dummy "file" to save to, which points to
the real save location: the git repository and branch to be used. We
should make this a config thing, but for testing, do something like
this:
echo git /home/torvalds/scuba:linus > git-test
to create that git information file, and when you use "Save To" and
specify "git-test" as the file to save to, subsurface will use the new
git save logic to save to the branch "linus" in the repository found at
"/home/torvalds/scuba".
NOTE 3: The git save format uses just the git object directory, it does
*not* check out the result in any git working tree or index. So after
you do a save, you can do
git log -p linus
to see what actually happened in that branch, but it will not affect any
actual checked-out state in the repository.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit 102bf768944b ("Rename old 'xml' file as 'bak' file when saving")
Linus forgot about our other standard filename extension...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If you use the standard naming convention and end your subsurface
filename in ".xml", we will now save away any previous xml file as a
"bak" file before writing a new one.
This can be useful for:
- recovering from mistakes that deleted old dives
- seeing what changed (ie you can do things like "diff -u xyz.bak
xyz.xml") after doing some operation and saving the result.
However, this does only a single level of backups - if you save twice,
you will obviously have lost the original. I'd strongly encourage some
external backup system in addition to this very simplistic backup.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The "size" member was confusing - it's the size of the allocation, not
the size of the current string. The size of the current string is the
member called "used".
This naming makes perfect sense for the internal implementation, but
it's confusing to users who actually do want to get the size of the
resulting string at the end.
So rename the fields to "alloc" and "len" - which is pretty clear.
This also adds a helper function to strip whitespace from the end:
"strip_mb()".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
libdivecomputer already supports this, but we didn't save it.
Tested-by: Oscar Isoz <jan.oscar.isoz@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This introduces a "struct membuffer" abstraction that you can write
things into, and makes the XML saving code write to the memory buffer
rather than a file.
The UDDF export already really wanted this: it used to write to a file,
only to then read that file back into memory, delete the file, and then
*rewrite* the file after doing the magic xslt transform.
But the longer-term reason for this is that I want to try to write other
formats, and I want to try to share most helpers. And those other
formats will need this memory buffer model.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Earlier we converted the C++ code to using true/false, and this converts
the C code to using the same style.
We already depended on stdbool.h in subsurfacestartup.[ch], and we build
with -std=gnu99 so nobody could build subsurface without a c99 compiler.
[Dirk Hohndel: small change suggested by Thiago Macieira: don't include
stdbool.h for C++]
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adds use of everything from the new wrappers(), but the
opendir() one.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I thought I had this fixed, but a silly thinko broke my fix.
Only abort the saving if both air AND water temperature are already
covered by the divecomputer(s) in a dive. If at least one of them is
different, then create a divetemperature tag and fill in that value at the
dive level.
Fixes#313
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previous show and save code would have aborted at the first invalid
weight system. This makes sure we save and show all weight systems up
until and including the last valid.
If we had:
integrated: 1kg
belt: 2kg
ankle: 3kg
And changed belt to 0 kg, we would have only saved integrated 1kg, and
nothing about the belt or the ankle weights. This will save all of them,
and show all of them.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The new implementation supports custom tags
which are provided by the user as well as
default tags which are provided by subsurface.
Default tags can be translated and will be written
to XML in their non-localized form.
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
Implement exporting in UDDF format as was done in Gtk version. File menu
exports all the dives, right click on selection exports the selected
ones.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- remove the build flags and libraries from the Makefile / Configure.mk
- remove the glib types (gboolean, gchar, gint64, gint)
- comment out / hack around gettext
- replace the glib file helper functions
- replace g_ascii_strtod
- replace g_build_filename
- use environment variables instead of g_get_home_dir() & g_get_user_name()
- comment out GPS string parsing (uses glib utf8 macros)
This needs massive cleanup, but it's a snapshot of what I have right now, in
case people want to look at it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This data structure was quite fragile and made 'undo' when editing
rather hard to implement. So instead I decided to turn this into a
QMultiMap which seemed like the ideal data structure for it.
This map holds all the dive computer related data indexed by the model. As
QMultiMap it allows multiple entries per key (model string) and
disambiguates between them with the deviceId.
This commit turned out much larger than I wanted. But I didn't manage to
find a clean way to break it up and make the pieces make sense.
So this brings back the Ok / Cancel button for the dive computer edit
dialog. And it makes those two buttons actually do the right thing (which
is what started this whole process). For this to work we simply copy the
map to a working copy and do all edits on that one - and then copy that
over the 'real' map when we accept the changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The DEBUGFILE logic isn't needed anymore. Nor are helpers dealing with
model / datastructure updates. Nor conditional compiles to use Gtk instead
of Qt.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And as we need the names for that, simplify the way we show the tags in the
Dive Info tab (and mark them for translation while we are at it).
In the process I renamed the constants to DTAG_ from DTYPE_ (and made
their nature as being just bits more obvious).
Also mark the box on the Info tab "Dive Tags", not "Dive Type".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This started out as a way to keep dives in the dive list but being able to
mark them as 'invalid' so they wouldn't be visible (with an option to
disable that feature).
Now it supports an (at this point, fixed) set of tags that can be assigned
to a dive with 'invalid' being just one of them (but one that is special
as it gets some additional support for hiding such dive and marking dives
as (in)valid from the divelist).
[Dirk Hohndel: merged with the latest code and minor changes for coding
style and consistency. Ensure divelist is marked as
modified when changing 'invalid' tag]
Signed-Off-By: Jozef Ivanecký (dodo.sk@gmail.com)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Testing the Planner in Subsurface on a Windows XP SP3 installation,
shows corrupted UTF-8 strings in the case of Cyrillic locales, but
possibly others as well. Instead limited to the Planner, this affects
the entire application.
After some examination it appears that <ctype>'s isspace() in MSVC
on the tested version of Windows is broken for some UTF-8 characters,
after enabling the user locale using: setlocale(LC_ALL, "");
For example, characters such as the Cyrillic capital "BE" are defined as:
0xD091, where isspace() for the first byte returns 0x08, which is the
bytemask for C1_SPACE and the character is treated as space.
After a byte is treated as space, it is usually discarded from a UTF-8
character/string, where if only one byte left, corrupting the entire
string.
In Subsurface, usages of string trimming are present in multiple
locations, so to make this work try to use GLib's g_ascii_isspace(),
which is a locale agnostic version of isspace().
Affected versions of Windows could be everything up to XP SP3,
but not apparently Vista.
Reported-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It was very broken, although it just happened to work for the values
dirk had in his own XML file (0 and 0.800 bar). Because of confusion
with number of digits it would save 1.080 bar as 1.80 bar.
Use our "show_milli()" helper for showing things that are in milli-units
(which is what we tend to use for most of our values: mK, mbar, mm, ml)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This does escaping / quoting for everything I found. Some of it was safe
(the divecomputer model is supplied from libdivecomputer, and none of them
have single quotes _yet_, afaik), but with this there are no '%s' strings
left except for the ones used by the helper functions (for "pre" and
"post" strings).
It also takes some of our existing uses of show_utf8(), and removes
the redundant "check if the string is NULL or empty". show_utf8() does
that internally.
Fixes#73
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We now load and save this in the XML file, we do the right thing when
merging dives and show the edited air temperature in the Dive Info
notebook when a divecomputer doesn't have an air temperature.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit b6c9301e58 ("Move more dive computer filled data to the
divecomputer structure") we moved the fields that get filled in by the
dive computers to be per-divecomputer data structures.
This patch re-creates some of those fields back in the "struct dive",
but now the fields are initialized to be a reasonable average from the
dive computer data. We already did some of this for the temperature
min/max fields for the statistics, so this just continues that trend.
The goal is to make it easy to look at "dive values" without having to
iterate over dive computers every time you do. Just do it once in
"fixup_dive()" instead.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Something which is nice especially when asked on the list to share an
interesting dive is the possibility to save just some dives into a file.
This commit adds to the context menu shown with right-click the 'Save As'
entry. This entry allows to save selected dives.
[Dirk Hohndel: clean up white space, commit message and remove unused
variables]
Signed-off-by: Pierre-Yves Chibon <pingou@pingoured.fr>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This centralizes all occurrences of Kelvin to dive.h and standardizes all
usages to milliKelvin.
[Dirk Hohndel: renamed the constant plus minor white space cleanup]
Signed-off-by: Jan Schubert <Jan.Schubert@GMX.li>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used to save dive computer information only if that dive computer was
actually used in any of the dives we saved. But we can simplify the
code if we just always save any dive computers we know about. And it
does allow for some usage cases where you have nicknames for other
peoples computers that you may not actively use, but you want to see if
you end up loading multiple XML files in one go.
So there's just no compelling reason to not just save all the info we
have. And this will make it less painful to remove the "use system
config for dive computer nicknames", because you can also use this to
continue to gather dive computer info in a separate XML file if you want
to.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This moves the fields 'duration', 'surfacetime', 'maxdepth',
'meandepth', 'airtemp', 'watertemp', 'salinity' and 'surface_pressure'
to the per-divecomputer data structure. They are filled in by the dive
computer, and normally not edited.
NOTE! All actual *use* of this data was then changed from dive->field to
dive->dc.field programmatically with a shell-script and sed, and the
result then edited for details. So while the XML save and restore code
has been updated, all the displaying etc will currently always just show
the first dive computer entry.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It turns out that the serial number returned by libdivecomputer isn't
really the serial number as interpreted by the vendor. Those tend to be
strings, but libdivecomputer gives us a 32bit number.
Some experimenting showed that for the Suunto devies tested the serial
number is encoded in that 32bit number:
It so happens that the Suunto serial number strings are strings that have
all numbers, but they aren't *one* number. They are four bytes
representing two numbers each, and the "23500027" string is actually the
four bytes 23 50 00 27 (0x17 0x32 0x00 0x1b). And libdivecomputer has
incorrectly parsed those four bytes as one number, not as the encoded
serial number string it is. So the value 389152795 is actually hex
0x1732001b, which is 0x17 0x32 0x00 0x1b, which is - 23 50 00 27.
This should be done by libdivecomputer, but hey, in the meantime this at
least shows the concept. And helps test the XML save/restore code.
It depends on the two patches that create the whole "device.c"
infrastructure, of course. With this, my dive file ends up having the
settings section look like this:
<divecomputerid model='Suunto Vyper Air' deviceid='d4629110'
serial='01201094' firmware='1.1.22'/>
<divecomputerid model='Suunto HelO2' deviceid='995dd566'
serial='23500027' firmware='1.0.4'/>
where the format of the firmware version is something I guessed at,
but it was the obvious choice (again, it's byte-based, I'm ignoring
the high byte that is zero for both of my Suuntos).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The legacy nickname wrappers (that use the device_info structure) are
left in gtk-gui.c. We can slowly start moving away from them, we don't
want to start exporting that thing as some kind of generic interface.
This isn't a pure code movement - because we leave the legacy interfaces
alone, there are a few new interfaces in device.c (like "create a new
device_info entry") that were embedded into the legacy "create nickname"
code, and needed to be abstracted out.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This change ended up being quite a bit bigger than expected as it
uncovered a number of bugs in the existing code.
The planner now handles gas changes correctly by creating (and later
parsing) events in the simulated divecomputer. At the end of the dive
specified in the input form the algorithm starts with the deepest
interesting depth: either the first stop below our ceiling or the deepest
depth at which we can change gases. It then traverses all the stop and all
the gas change depth and at each stage ensures that we are allowed to
ascend further before going on.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having two spots to toggle autogroup had always been a clear sign of
insanity. The inconsistent ludicrous semantic of when we remembered the
state of autogroup was even worse.
This finally gets rid of that disaster and drops the autogroup setting
from the preferences and makes it instead a per file property. When you
save a file, it saves the state of the autogroup toggle. This seems much
more useful - you may have files where you want to create trips by
default. And others, where you don't.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit c7169bd24f22 "Fix nickname saving in XML file to deal with utf8
characters" I added the helper function to clear the "this divecomputer
has already been saved"-flag. But then forgot to call it from save_dives
before saving the divecomputer nicknames.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This clarifies/changes the meaning of our "cylinderindex" entry in our
samples. It has been rather confused, because different dive computers
have done things differently, and the naming really hasn't helped.
There are two totally different - and independent - cylinder "indexes":
- the pressure sensor index, which indicates which cylinder the sensor
data is from.
- the "active cylinder" index, which indicates which cylinder we actually
breathe from.
These two values really are totally independent, and have nothing
what-so-ever to do with each other. The sensor index may well be fixed:
many dive computers only support a single pressure sensor (whether
wireless or wired), and the sensor index is thus always zero.
Other dive computers may support multiple pressure sensors, and the gas
switch event may - or may not - indicate that the sensor changed too. A
dive computer might give the sensor data for *all* cylinders it can read,
regardless of which one is the one we're actively breathing. In fact, some
dive computers might give sensor data for not just *your* cylinder, but
your buddies.
This patch renames "cylinderindex" in the samples as "sensor", making it
quite clear that it's about which sensor index the pressure data in the
sample is about.
The way we figure out which is the currently active gas is with an
explicit has change event. If a computer (like the Uemis Zurich) joins the
two concepts together, then a sensor change should also create a gas
switch event. This patch also changes the Uemis importer to do that.
Finally, it should be noted that the plot info works totally separately
from the sample data, and is about what we actually *display*, not about
the sample pressures etc. In the plot info, the "cylinderindex" does in
fact mean the currently active cylinder, and while it is initially set to
match the sensor information from the samples, we then walk the gas change
events and fix it up - and if the active cylinder differs from the sensor
cylinder, we clear the sensor data.
[Dirk Hohndel: this conflicted with some of my recent changes - I think
I merged things correctly...]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used to have the rule that a dive trip has to have all dives in it in
sequential order, even though our XML file really is much more flexible,
and allows arbitrary nesting of dives within a dive trip.
Put another way, the old model had fairly inflexible rules:
- the dive array is sorted by time
- a dive trip is always a contiguous slice of this sorted array
which makes perfect sense when you think of the dive and trip list as a
physical activity by one person, but leads to various very subtle issues
in the general case when there are no guarantees that the user then uses
subsurface that way.
In particular, if you load the XML files of two divers that have
overlapping dive trips, the end result is incredibly messy, and does not
conform to the above model at all.
There's two ways to enforce such conformance:
- disallow that kind of behavior entirely.
This is actually hard. Our XML files aren't date-based, they are
based on XML nesting rules, and even a single XML file can have
nesting that violates the date ordering. With multiple XML files,
it's trivial to do in practice, and while we could just fail at
loading, the failure would have to be a hard failure that leaves the
user no way to use the data at all.
- try to "fix it up" by sorting, splitting, and combining dive trips
automatically.
Dirk had a patch to do this, but it really does destroy the actual
dive data: if you load both mine and Dirk's dive trips, you ended up
with a result that followed the above two technical rules, but that
didn't actually make any *sense*.
So this patch doesn't try to enforce the rules, and instead just changes
them to be more generic:
- the dive array is still sorted by dive time
- a dive trip is just an arbitrary collection of dives.
The relaxed rules means that mixing dives and dive trips for two people
is trivial, and we can easily handle any XML file. The dive trip is
defined by the XML nesting level, and is totally independent of any
date-based sorting.
It does require a few things:
- when we save our dive data, we have to do it hierarchically by dive
trip, not just by walking the dive array linearly.
- similarly, when we create the dive tree model, we can't just blindly
walk the array of dives one by one, we have to look up the correct
trip (parent)
- when we try to merge two dives that are adjacent (by date sorting),
we can't do it if they are in different trips.
but apart from that, nothing else really changes.
NOTE! Despite the new relaxed model, creating totally disjoing dive
trips is not all that easy (nor is there any *reason* for it to be
easty). Our GUI interfaces still are "add dive to trip above" etc, and
the automatic adding of dives to dive trips is obviously still based on
date.
So this does not really change the expected normal usage, the relaxed
data structure rules just mean that we don't need to worry about the odd
cases as much, because we can just let them be.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit makes deco handling in Subsurface more compatible with the way
libdivecomputer creates the data. Previously we assumed that having a
stopdepth or stoptime and no ndl meant that we were in deco. But
libdivecomputer supports many dive computers that provide the deco state
of the diver but with no information about the next stop or the time
needed there. In order to be able to model this in Subsurface this adds an
in_deco flag to the samples. This is only stored to the XML file when it
changes so it doesn't add much overhead but will allow us to display some
deco information on dive computers like the Atomic Aquatics Cobalt or many
of the Suuntos (among others).
The commit also removes the old event based deco code that was commented
out already. And fixes the code so that the deco / ndl information is
stored for the very last sample as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There is no point writing out divecomputer nicknames that do not exist
(or that match the dive computer model), so don't.
Also, make the function to do this static to save-xml.c, which is the
only user (I initially didn't _find_ the function to create the XML
string because it was illogically hidden in gtk-gui.c), and change the
calling convention to be more direct (pass in a string and return a
result, rather than modify a "pointer to string").
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We only store the model/deviceid/nickname for those dive computers that
are mentioned in the XML file. This should make the XML files nicely
selfcontained.
This also changes the code to consistently use model & deviceid to
identify a dive computer. The deviceid is NOT guaranteed to be collision
free between different libdivecomputer backends...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having it there with the model information seemed to make sense but on
second thought it's the wrong spot to keep that information, especially
since we were storing it in the XML file in every single dive.
This change removes the nickname member from the divecomputer and makes
the rest of the code reasonably self consistent. It does not add much of
the new code for the new design to handle nicknames.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We maintain a list of dive computers that we know about (by deviceid) and
their nicknames in our config. If the user downloads dive from a dive
computer that we haven't seen before, we give them the option to set a
nickname for that dive computer. That nickname is displayed in the profile
(and stored in the XML file, assuming it is not the same as the model).
This implementation attempts to make sure that it correctly deals with
utf8 nicknames.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the new members to the sample structure and fills them from
supported dive computers (Uemis SDA and OSTC / Shearwater Predator,
assuming you have libdivecomputer 0.3).
Save relvant values of this to the XML file and load it back. Handle the
new fields when merging dives.
At this stage we don't DO anything with this, all we do is extract them
from the dive computer, save them to the XML file and load them back.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Several things were wrong.
- we saved it as floating point (that was stupid, given the locale issue
with that and given the fact that the precision was really artificial)
- we always saved it when set (we should only save it if the value is
different from our default of 1030g/l == salt water)
- most embarrassing - the unit we assigned was wrong. That's g/l, not
kg/l...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This actually makes us internally use 'micro-degrees' for latitude and
longitude, and we never turn them into floating point either at parse
time or save time.
That said, the Uemis downloader internally does still use atof() when
converting things, which is likely a bug (locale issues and all that),
but I'll ask Dirk to check it out.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I hate using floating point, this tries to at least make parts of it be
integer logic, and avoid the whole locale issue. This still keeps the
latitude and longitude internally as a floating point value, and parses
it that way, but I'm slowly moving towards less and less FP use.
We're going to use micro-degrees for location information: that's
sufficient to about a tenth of a meter precision, and it fits in a
32-bit integer.
If you specify dive sites with more precision than that, you may have
OCD.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
