I don't quite understand why these functions were removed for Qt5.4, but
this causes the build to break with Qt5.4.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Sometimes we get a sensor number of 255 - which gets turned into a tank
index and then causes all kinds of havoc. Simply refuse to use a tank
number larger than the maximum Subsurface has been compiled for.
Oh, and use consistent variables to handle these unsigned 8 bit integers.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A complete batch of divelog and dive data takes about 20% of the available
space (depending on how long those dives are). This is a hack and I can
see this potentially going wrong, but the alternative is to be even more
conservative and that has its own set of problems as it causes us to need
more "unplug, wait, plug in again and restart" cycles.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This looks like a fairly big change but it mostly just moves a block of
code inside an earlier loop and adjust a few variables around it.
The completely broken and insane Uemis download protocol distributes data
across different "databases" on the dive computer. The "divelogs" are
downloaded in batches of 10 (most of the time), and with this change every
time one of those batches is downloaded we straight away get the matching
"dive" entries.
Hopefully this will avoid having the download abort (for lack of space)
before all components are loaded.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This caused us to not read the auxiliary information for up to the last
ten dives that were downloaded from the SDA.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user hits retry from within the download dialog, the dive list
might still be empty but we still have to look for the best point to
restart.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we run out of space in the Uemis filesystem we return an error. The
user could reasonably unplug the SDA, insert it again and then retry to
continue the download (that's what we tell them to do). In that case we
need to make sure we start at the correct dive otherwise the same dives
keep getting downloaded over and over again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dialog didn't accept "OK" and store the dives downloaded / selected so
far if there had been an error. Especially with partial downloads from the
Uemis SDA this is something that is quite reasonable to want to do, so
allow exiting the dialog with OK even after an error.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We do a good job in the fixup_dive() code to make sure we don't add long
surface tails to the dives, so don't try too hard to guess the correct
last sample in the Uemis specific code.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This unbreaks the qmake build system by adding urldialog.ui there. Yes,
i know we're planning on switching away but i still build things via
qmake and its nice if it works until we actually remove it.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a default case which just errors out for the switch over
dc_family_t instead of checking a uninitialized variable if this was
ever called with something else than one of the expected dc-family
types.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of writing each dive out to a file and reading that file back in,
let's just use the internal helper function that places the dive as XML
into a membuffer.
So much simpler, so much faster.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
save_one_dive_to_mb() is very useful (but there was a namespace collision
with another helper in save_git.c)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previously we simply failed silently without showing the user any
indication that something went wrong. That seems wrong.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This disables planner UI elements in recreational mode that have no function
in that mode.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Here on my Mac I had an issue that took a long time to understand.
The build.sh script was correctly creating Marble but did not
correctly run otool on it. So I fixed this by fixing CMake for
the marble library which means we don't need to worry about it
in the build script anymore.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After doing a make clean / make confclean the makefiles
were erased and running the configure script again didn't
created the makefile.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
MACOSX_BUNDLE and WIN32 give hints to cmake for different
install behaviors. for instance, trying to copy frameworks
and other stuff to the correct places.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We are compilling those libraries and we know where they are, so
pass the directories and the libraries in a go directly. CMake was
a bit random when choosing the correct ones, this way we are sure
we got them.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Dive context menu:
After the addition of the item "Add image(s) from web" the item
immediately above is "Add images". It is proper to specify now:
"Add image(s) from file(s)" to make the distinction clear. I also
change "Shift times" to "Shift dive times".
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Only build the tests when running them. The downside of the way this is
implemented is that build errors for the tests actually show up as test
errors and are only seen in the test log - but this seemed worth not
having every build include the tests.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a new divelist context menu entry which asks for a URL. The file
is retrieved and if it is an image it is added to the cache and the url
is associated to dives as with local files.
NB this currently only works with URLs pointing directly to images. But it
should not be too hard to add the possibility to add a direction via an html
file and its image tags.
To test: open dives/test43.xml and delete the image and then add the URL
http://euve10195.vserver.de/~robert/wreck.jpg
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Factor out image load to find timestamp from loop over dives.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use more explicit variabel names and make the get timestamp function actually
return the timestamp rather than getting a pointer argument
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also fixed it to correctly parse the mean depth (duh, a test that had a
bug) and added a buddy field for good measure.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we delete a cylinder the gas changes in that dive may have to be
adjusted. We didn't do this at all in the past. With this commit we should
be doing this right for a single dive that is being edited.
This does NOT handle multiple dives being edited at the same time (or more
specifically - if you have multiple dives selected and delete a cylinder,
the dives that had the same set of cylinders (other than the displayed
dive) will get that particular cylinder deleted, but won't have their gas
change events (and sensor data in the samples) adapted.
Possibly we should simply prohibit deleting cylinders when more than one
dive are selected.
See #834
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Right now the way to edit the profile of a manually added dive is really
counterintuitive: you have to first make some random change to the dive
information, then the profile switches in to editing mode.
This commit adds a simple context menu entry on the profile that is only
shown when the a manually added dive is displayed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
XSLT conversions create V2 XML files, but we shouldn't abort when we parse
those without having the user informed about the potential slowness - all
XSLT based imports are slow, anyway.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Oops, that was embarrassing. Just setting it on displayed_dive doesn't
gain us anything if it isn't transferred to the selected dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We assumed that a trip was selected when all of its dives were selected
instead of just remembering if the trip itself was selected. I'm sure
there was a reason for that but I cannot think of any. But a side effect
is that if you have a trip with only one dive in it and have that one dive
selected and edit it, after saving your changes you end up on the trip
(which is now also selected) and are no longer on the dive. And that seems
quite wrong.
The new code simply remembers that the trip was selected. And selects it
again if it was.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Sometimes we get a sensor number of 255 - which gets turned into a tank
index and then causes all kinds of havoc. Simply refuse to use a tank
number larger than the maximum Subsurface has been compiled for.
Oh, and use consistent variables to handle these unsigned 8 bit integers.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
