Switch oldStatus from qmlprefs to qmlmanager
This is the last use of QMLPrefs, which can later be safely removed.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
oldStatus() is kept in qmlPrefs during the login process to allow
for a couple of special cases:
- if a user have added dives in NO_CLOUD mode and changes to use the
cloud these dives are copied to the Cloud, instead of being lost.
- if a user does a bailout from the login process (this should not
happen anymore) the old status is restored.
The pure solution would be to have oldStatus at the top level (e.g.
a property in qml) and only change it when actually being in the
login process, however due to way the qmlmanager is written it proved
very difficult and not worth the effort.
In order to be able to remove qmlPrefs, oldStatus are moved to
qmlManager.
This commit only contain the creation of the variable and the supporting
code.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
call setOldStatus() and set_filename().
saveCredentials() will adjust email and password.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This setCredentialStatus() will never do anything, because qPrefCloudStorage
is identical to prefs.cloud_verification_status, and can thus be
safely removed.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Revert to the divelist by setting oldStatus() directly to
set_cloud_verification_status()
This is done to further limit the use of setCredentialStatus() and
prepare to remove qmlPrefs.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Update revertToNoCloudIfNeeded() to not use setCredentialStatus() by adding an
extra call to setOldStatus()
setOldStatus() is called in setCredentialStatus together with
set_cloud_verification_status() therefore these 2 calls need to added when
removing setCredentialStatus().
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
qmlprefs::setCredentialStatus() basically only does something when called with
CS_NOCLOUD.
A number of setCredentialStatus() calls happen where status cannot be
CS_NOCLOUD, and therefore setCredentialStatus() can be safely replaced with
set_cloud_verification_status()
This limits the use of qmlprefs::setCredentialStatus(), but there are still a
couple of more complicated calls.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace all credentialStatus() with cloud_verification_status()
Where both prefs.credentialStatus and
PrefCloudStorage.cloud_verification_status are being set, remove
prefs.credentialStatus.
These replacements are valid since credentialStatus() is a simple
envelope over cloud_verification_status().
Also remove qmlPrefs::credentialStatus() from qmlPrefs (mostly to ensure no
replacements was forgotten).
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
cloudPin does only have the values "" and NULL, so replace cloudPin()
with "" in csa->backend() call
remove setting of cloudPin to ""
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
cloudPin is only set to "" and NULL, therefore and "if" checking if
cloudPin is not empty will never have affect.
Remove else part.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add pin parameter to saveCredentials() thereby having all info about
credentials in one function call.
Add "" as pin in saveCredentials() - main.qml, when verifying
credentials.
replace verifyCredentials() with saveCredentials() in the register
button on the pin page.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace prefs.cloudPassword with PrefCloudStorage.cloud_storage_password in QML
Replace QMLPrefs.....cloudPassword with PrefCloudStorage::cloud_storage_password in C++
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace prefs.cloudUserName with PrefCloudStorage.cloud_storage_email in QML
Replace QMLPrefs.....cloudUserName with PrefCloudStorage::cloud_storage_email in C++
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Call saveCredentials with username/password to avoid first
setting the two and then calling.
Change saveCredentials() to use newUser, newPassword.
Signed-off-by: Jan Iversen <jani@apache.org>
This adds a tab for dive log - related preferences.
A suitable test programs is still required.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
WARNING: multi directory commit, needed to secure it builds.
move the core/exportfuncs.* to backend-shared.
update backend-shared/CMakeLists.txt to generate backend-shared lib
update CMakeLists.txt to include backend-shared lib in link process.
update ios project to reflect new directory
Signed-off-by: Jan Iversen <jan@casacondor.com>
LOG_STP is on longer providing the data needed, since a lot of the startup
is indirectly in QML, furthermore using the xcode project and running profiler
gives much more detailed information
Signed-off-by: Jan Iversen <jani@apache.org>
Remove "TO BE IMPLEMENTED" and add call doUpload
Connect signal to signal in QMLManager to avoid registring the
upload class.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Since we now have a selection.c translation unit, put the selection-
related functions there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add enum with different export types (used to signal which type
of export QML desires).
Add QML export functions (one for file and one for upload to web)
Signed-off-by: Jan Iversen <jan@casacondor.com>
This is even easier and more obvious than copying the logs on the About page
and then manually creating an email and pasting those logs.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of accessing the cylinder table directly, use the get_cylinder()
function. This gives less unwieldy expressions. But more importantly,
the function does bound checking. This is crucial for now as the code
hasn't be properly audited since the change to arbitrarily sized
cylinder tables. Accesses of invalid cylinder indexes may lead to
silent data-corruption that is sometimes not even noticed by
valgrind. Returning NULL instead of an invalid pointer will make
debugging much easier.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of using fixed size arrays, use a new cylinder_table structure.
The code copies the weightsystem code, but is significantly more complex
because cylinders are such an integral part of the core.
Two functions to access the cylinders were added:
get_cylinder() and get_or_create_cylinder()
The former does a simple array access and supposes that the cylinder
exists. The latter is used by the parser(s) and if a cylinder with
the given id does not exist, cylinders up to that id are generated.
One point will make C programmers cringe: the cylinder structure is
passed by value. This is due to the way the table-macros work. A
refactoring of the table macros is planned. It has to be noted that
the size of a cylinder_t is 64 bytes, i.e. 8 long words on a 64-bit
architecture, so passing on the stack is probably not even significantly
slower than passing as reference.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When we change the filter string, we need to make sure that the collapsed model is
also aware of the change.
Similarly, instead of just calling resetFilter and directly changing the core
data structures, we need to set the filter to the empty string which ensures
that all three models get notified and the view updates correctly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While the error that caused this to happen should be fixed, we should at least
let the user know if things failed catastrophically and we can't figure out how
to save their data.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If there is a local cache, we at least once successfully accessed the cloud, so
this is a valid cloud based git tree.
Without this change we run into a subtle bug: after a fresh install, or when
switching users, when the cloud data is accessed the very first time, we don't
remember that this was indeed loaded from the cloud. So if we then download
from a dive computer or make any other changes to the dive log, we cannot save
those dives to cloud storage - but we fail silently doing so. Which to the user
would look that inexplicable data loss.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old code was ill named - this way the busy spinner itself
becomes reusable with a reasonable set of function names.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While on mobile there should always be only one selected dive, it's very
cheap to make sure that amount_selected is tracked correctly. The
incrementing of amount_selected is done in case an invalid id is passed
in.
Suggested-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To make this class available from QMLManager, the run_ui()
function would create the object and then set a pointer in
QMLManager. It works, but is inconsistent with the rest of
the code. Therefore, make it a classical singleton class,
which is generated on demand.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Clearing the dive data directly in the core leaves us with an
inconsistent model. Therefore, clear via the model.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of using the GpsLocation singleton in GpsListModel::update()
to extract the gpsTrackers, pass the gpsTrackers as function argument.
The caller has direct access to the GpsLocation object anyway and this
make things less entangled.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The way we handle singletons in QML, QML insists on allocating the
objects. This leads to a very idiosyncratic way of handling
singletons: The global instance pointer is set in the constructor.
Unify all these by implementing a "SillySingleton" template. All
of the weird singleton-classes can derive from this template and
don't have to bother with reimplementing the instance() function
with all the safety-checks, etc.
This serves firstly as documentation but also improves debugging
as we will now see wanted and unwanted creation and destruction
of these weird singletons.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This addresses the following warning when running the mobile app:
INFO: QQmlExpression: Expression qrc:/qml/DownloadFromDiveComputer.qml:339:5 depends on non-NOTIFYable properties:
INFO: QMLManager::DC_forceDownload
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of handing a reference-to-dive to QML, prerender all the needed
properties and store them as values in DiveObjectHelper. Exception:
- date(): generated from timestamp
- time(): generated from timestamp
- cylinderList(): does not depend on dive anyway and should be made
static.
This hopefully avoids the random mobile crashes that we are seeing.
Clearly, this code needs to be optimized, but it is a start.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since DiveListModel does not keep its own list of dives anymore,
insertDive() doesn't use the DiveObjectHelper argument. Remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of creating a pointer-to-DiveObjectHelper in commitChanges,
use a normal object. Thus, we don't have to think about ownership
issues with respect to this object.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The clear()/addAllDives() pair was bogus as the former didn't
clear the model (this is not possible anymore - the model
represents the core dive list) and the latter readded all
dives again.
Replace this by a reload() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It seems crazy to simply assume that the later code can successfully
untangle the various states that the credentials can be in - let's just
stay on the credentials enrty page until we have verified credentials.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should do the right thing in the various situations of correct &
verified credentials, credentials needing PIN verification, invalid
email/password combination, incorrect PIN, correct PIN.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If a dive has no weightsystems, editing the weight system has to add
a new entry in the table. Implement that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Always keep the dive site model up to date when adding dive sites.
This hopefully avoids creation of invalid indexes followed by crashes.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the declarations of the "report_error()" and "set_error_cb()"
functions and the "verbose" variable to errorhelper.h.
Thus, error-reporting translation units don't have to import the
big dive.h header file.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace the fixed-size weightsystem table by a dynamically
relocated table. Reuse the table-macros used in other parts
of the code.
The table stores weightsystem entries, not pointers to
weightsystems. Thus, ownership of the description string is
taken when adding a weightsystem. An extra function adds
a cloned weightsystem at the end of the table.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These functions were spread out over dive.c and divelist.c.
Move them into their own file to make all this a bit less monolithic.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
I'm not sure this is actually relevant for anything any more, but this
adds the USB device ID's for the Scubapro G2 Console and HUD versions.
It also fixes things to use the proper vendor name (a bit too much
cut-and-paste, where the code said "Suunto" instead of "Scubapro").
The real device ID changes are in libdivecomputer, this is just the
Android xml list for recognized USB devices that likely nobody really
uses.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The LocationInformationModel used to sort its entries and was completely
rebuilt after every change. This makes it rather complex to support
incremental changes.
Instead, keep LocationInformationModel sorted by UUID so that indexes
are consistent with indices in the core dive site table.
Implement sorting by other columns than name and enable sorting in the
dive site view.
Finally, don't cache the list of dive site names for the mobile app,
since that would also need some rather convoluted methods of keeping
the list up to date. Calculate it on the fly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of setting dive->dive_site directly, call the
add_dive_to_dive_site() and unregister_dive_from_dive_site()
functions. In the parser this turned out to be a bit tricky.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the declaration of these functions to "file.h" and "parse.h"
according to the translation unit they are defined in. Thus, not
all users of "dive.h" have to suck in "sqlite3.h".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the UUID will be overwritten on save and is only used on save
and load, set it only on save or load. For other created dive sites,
leave the UUID field uninitialized.
This means that the UUID will change between saves. Let's see how
the git saver handles that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As opposed to dive trips, dive sites were always directly added
to the global table, even on import. Instead, parse the divesites
into a distinct table and merge them on import.
Currently, this does not do any merging of dive sites, i.e. dive
sites are considered as either equal or different. Nevertheless,
merging of data should be rather easy to implement and simply
follow the code of the dive merging.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To extend the undo system to dive sites, the importers and downloaders
must not parse directly into the global dive site table. Instead,
pass a dive_site_table argument to parse into.
For now, always pass the global dive_site_table so that this commit
should not cause any functional change.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To enable undo of dive site functions, it is crucial to work
with different dive site tables. Therefore add a dive site table
parameter to dive site functions. For now, always pass the global
dive site table. Thus, this commit shouldn't alter any functionality.
After this change, a simple search for dive_site_table reveals all
places where the global dive site table is accessed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
See https://www.kdab.com/goodbye-q_foreach/
This is reduced to the places where the container is const or can be made const
without the need to always introduce an extra variable. Sadly qAsConst (Qt 5.7)
and std::as_const (C++17) are not available in all supported setups.
Also do some minor cleanups along the way.
Signed-off-by: Rolf Eike Beer <eike@sf-mail.de>
printGPSCoords() returned a newly allocated C-style string. Most
callers simply made a QString out of it and freed the C-style string.
This is paradoxical, as printGPSCoords internally works with QStrings
and converts them to C-style on return.
Therefore, let printGPSCoords() return a QString and create a
printGPSCoordsC() wrapper for the two C-callers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The printGPSCoords() function returns a copied C-style string. Since
the owndership is transferred to the caller, the correct return type
is "char *" instead of "const char *".
Thus a number of casts when calling free can be removed.
Moreover a number of callers didn't free the string and thus were
leaking memory. Fix them. Ultimately we might want two versions
of the function: one for QString, one for C-style strings.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
And offer an option to show all devices in the settings. This is intentionally
not stored in the preferences as this should never be needed. We don't support
BT or BLE dive computers that we don't recognize. This is a last resort in case
a new firmware were to change the name or some other weird issue causes us not
to recognize a dive computer - and that should be fixed instead of worked
around.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
process_imported_dives() takes four boolean parameters. Replace these
by flags. This makes the function calls much more descriptive. Morover,
it becomes easier to add or remove flags.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since process_imported_dives() can add dives to a newly generated
trip, this need not be done in the downloading code. This makes
data flow distinctly simpler, as no trip table and no add-new-trip
flag has to be passed down to the libdivecomputer glue code.
Moreover, since now the trip creation is done at the import step
rather than the download step, the latest status of the "add to
new trip" checkbox will be considered.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If this flag is set, dives that are not assigned to a trip will
be assigned to a new trip. This flag is set if the user checked
"add to new trip" in the download dialog of the desktop version.
Currently this is a no-op as the dives will already have been
added to a new trip by the downloading code. This will be removed
in a subsequent commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Split the process_imported_dives() function in two:
1) process_imported_dives() processes the dives and generates
a list of dives and trips to be added and removed.
2) add_imported_dives() calls process_imported_dives() and
does the actual removal / addition of dives and trips.
The goal is to split preparation and actual work, to
make dive import undo-able.
The code adds extra checks to never merge into the same
dive twice, as this would lead to a double-free() bug.
This should in principle never happen, as dives that
compare equal according to is_same_dive() are merged
in the imported-dives list, but perhaps in some pathologival
corner-cases is_same_dive() turns out to be non-transitive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When importing log-files we generally want to merge trips. But
when downloading and the user chose "generate new trip", that
new trip should not be merged into existing trips.
Therefore, add a "merge_all_trips" parameter to process_imported_dives().
If false only autogenerated trips [via autogroup] will be merged.
In the future we might want to let the user choose if trips
should be merged when importing log-files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old way of merging log-files was not well defined: Trips
were recognized as the same if and only if the first dives
started at the same instant. Later dives did not matter.
Change this to merge dives if they are overlapping.
Moreover, on parsing and download generate trips in a separate
trip-table.
This will be fundamental for undo of dive-import: Firstly, we
don't want to mix trips of imported and not-yet imported dives.
Secondly, by merging trip-wise, we can autogroup the dives
in the import-data to trips and merge these at once. This will
simplify the code to decide to which trip dives should be
autogrouped.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To allow parsing into arbitrary trip_tables, add the corresponding
parameter to the parsing functions and the parser state. Currently,
all callers pass the global trip_table so there should be no change
in functionality. These arguments will be replaced in subsequent commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently trips are added to the global trip table. If we want to
make dive-import undoable, we should be able to parse trips of a
log-file into a distinct table. Therefore, add a trip_table
parameter to
- insert_trip()
- create_and_hookup_trip_from_dive()
- autogroup_dives()
- unregister_trip()
- remove_dive_from_trip()
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, all trips are kept in a linked list. Replace the list
by a table in analogy to dive_table. Use this to keep the trip_table
sorted as suggested by dump_trip_list(). When inserting a trip into
the table do that after adding the dives, to avoid warnings coming
out of dump_trip_list().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Rename
- dive_get_insertion_index() -> dive_table_get_insertion_index()
- unregister_dive_from_table() -> remove_from_dive_table()
- get_idx_in_table() -> get_idx_in_dive_table()
- sort_table() -> sort_dive_table()
This will make it more straight-forward to generate these functions
from macros.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Commit 68961a169e made it impossible
to edit a dive site on mobile if a dive-site was already set: If
divesite was non-null, no actions were taken. Remove the conditional.
Reported-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For some devices the BT device name is different from the product name.
Make sure that name is available to the mobile UI. This helper fills it
in from the scan data (based on the device address).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Apparently this does the trick of updating the dive list when pasting
data on mobile. Tnx janmulder.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
DCDeviceData was using that weird pattern where the instance
variable was set in the constructor. There is no apparent
reason to do so, therefore convert to a "normal" singleton.
Access that directly in QMLManager instead of saving it in
a member variable first.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only remaining use of the tripflag was to mark dives that
were removed explicitly from a trip, i.e. shouldn't be autogrouped.
Therefore replace the enum by a simple boolean.
Currently, there is no way of unsetting the notrip flag. But this
shouldn't result in a user-visible change.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dives of each trip were kept in a list. Replace this by a
struct dive_table. This will make it significantly easier to
keep the dives of a trip in sorted state.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There were two versions of the insert_trip() function: one
would merge trips if a trip with the same date already existed,
the other wouldn't. The latter was introduced with the dive-list
undo work.
The problem is that the "date" of a trip (i.e. the first dive)
seems ill-defined as this is a volatile value. Moreover in
the context of making dive-import undoable this is a very
dangerous notion, as the caller needs control over when the dives
are added to a trip.
Therefore, unify these two functions and never merge trips.
The decision on merging dives now has to made by the caller.
This will be implemented in a future commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Naturally the paste button should be disabled, if this is the case, but
it still makes sense to do this check.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Initial implementation/prototype of copy-paste support for
Subsurface-mobile. The UI part is really lacking; right now the copy
button is initially visible and paste is achieved by long press on a
dive and clicking the paste button when it appears. Delete is currently
not possible at all, as I just failed to layout the buttons properly
using QML. It just sounds so simple, to put all the copy-paste-delete
buttons next to each other...
The data to be copied is currently hard-coded. A dialog to choose
inteded fields would be nice, but it'll take quite a bit effort to get
used to QML enough to be able to hack something together.
Anyway, this seems to work, even though the UI is not always reflecting
the paste without switching dives (when testing on laptop).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
While not something that many will use, editing a dive on
Subsurface-mobile should not result in data loss.
This makes the divemaster field behave in the same way as the buddy
field with regards to multiple entries.
Fixes#1853
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace the UUID reference of struct dive by a pointer to dive_site.
This commit is rather large in lines, but nevertheless quite simple
since most of the UUID->pointer work was done in previous commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This changes more of the dive-site interface to return pointers
instead of UUIDs. Currently, most call sites directly extract
UUIDs afterwards. Ultimately, the UUIDs will be generally replaced
by pointers, which will then simplify these callers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As a first step in removing dive-site uuids, change the interface
of the get_dive_site_*() functions to return pointers instead
of uuids. This makes code a bit more complicated in places where
the uuid is extracted afterwards (needed NULL check). Nevertheless,
these places should disappear once pointers instead of uuids are
stored in the dive-structures.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of having people treat latitude and longitude as separate
things, just add a 'location_t' data structure that contains both.
Almost all cases want to always act on them together.
This is really just prep-work for adding a few more locations that we
track: I want to add a entry/exit location to each dive (independent of
the dive site) because of how the Garmin Descent gives us the
information (and hopefully, some day, other dive computers too).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
AddDivesToTrip, CreateTrip, AutogroupDives, RemoveAutogenTrips
and MergeTrips basically all did the same thing as RemoveDivesFromTrip,
which was already implemented. Thus, factor our the common functionality
and hook it up to make all these functions undo-able.
Don't do the autogroup-call everytime the dive-list is rebuilt
(that would create innumberable undo-actions), but only on dive-load /
import or if expressly asked by the user [by switching the autogroup
flag].
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
After the previous commits, we now have a preference that nicely
preserves the state of the UI, and we have the well known git_local_only
global, that is used to denote whether we want to use to local repo
only, or we want to interact with the online cloud as well.
This commit gets rid of the now superfluous syncToCloud logic. Instead
we simply set the git_local_only directly.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This simple one-liner fixes an actual bug. On switching from
a no-cloud account to a actual cloud account, the dives from
the no-cloud are added to the actual cloud account. And indeed
the dives appear correctly. However, when exiting the app
right away, these added dives are not commited to the local
storage. Simply, the divelist needs to be marked dirty.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
process_imported_dives() is more efficient for downloaded than for
imported (from a file) dives, because it checks only the divecomputer
of the first dive.
This condition is checked via the "downloaded" flag of the first
dive. Instead, pass an argument to process_imported_dives().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Dives are now in all cases imported via distinct dive_tables.
Therefore the "preexisting" marker is useless. Remove.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
process_dives() is used to post-process the dive table after loading
or importing. The first parameter states whether this was after
load or import.
Especially in the light of undo, load and import are fundamentally
different things. Notably, that latter should be undo-able, whereas
the former is not. Therefore, as a first step to make import undo-able,
split the function in two versions and remove the first parameter.
It turns out the the load-version is very light. It only sets the
DC nicknames and sorts the dive-table. There seems to be no reason
to merge dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We only store the address part of the connection name, so don't try to find an
exact match, try to find the sub-string.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The unit types are set from system locale when the app starts.
We need to explicitly set the units to match the unit system that is saved in
the git repo. Or we end up with situations where the preferences and git say
"metric" but the units are "imperial".
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use qPrefLocationService::set_time_threshold and remove from
qmlprefs.cpp and qmlmanager.cpp
Remark: mobile UI shows time in minutes, while it is stored (and calculated)
in seconds. Therefore a /60 when reading and *60 when setting.
Signed-off-by: Jan Iversen <jani@apache.org>
Remove distanceThreshold from qmlprefs and use qPref instead
update qml
no user experience change
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Despite the fast that this code is sitting in core, its used mainly
from mobile. In 987e221f8e, the buttons to interact with the GPS
webservice were deleted from the UI. Now, delete all the code that
was used under these buttons.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
When installing for the first time cloudCredentials needs to be added,
this commit a problem with updating them correctly
this problem was caused by
da6e8a4cd5
Signed-off-by: Jan Iversen <jani@apache.org>
To enable undo of divelog-importing it is crucial that parse_file()
can parse into arbitrary dive tables.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
A trivial cleanup: replace void by properly typed pointers in
cylinder_none() and weightsystem_none(). Moreover, remove the
unused function no_weightsystems().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
remove use of SettingsObjectWrapper::
remove include of SettingsObjectWrapper.h
use qPrefFoo:: for setters and getters
replace prefs.foo with qPrefXYZ::foo() where feasible
(this expands to the same code, but gives us more control
over the variable).
Signed-off-by: Jan Iversen <jani@apache.org>
remove General from SettingsObjectWrapper and reference qPrefGeneral
update files using SettingsObjectWrapper/General to use qPrefGeneral
this activated qPrefGeneral and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove LocationService from SettingsObjectWrapper and reference qPrefLocationService
update files using SettingsObjectWrapper/LocationService to use qPrefLocationService
this activated qPrefLocationService and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
With the new setup we need to know which state we are coming from
when we are saving cylinder related info. When we are adding
a new dive we explicitly should save cylinder data to the first cylinder.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Same as for cylinder info, we need to make sure that the gasmixes gets saved to the correct cylinder.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Save the edited cylinder in the correct slot.
Since the cylinder number and the used cylinder number need not be
the same we first need to test if the cylinder are used.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Parse the device string and try to figure out what was plugged in.
In some cases we know exactly which vendor and product was plugged in,
in other cases we only know which vendor it was, in some cases we don't
even know that (if all we see is a generic FTDI cable).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And try to guess which one from the device string we get from the Intent.
The function is named to indicate its future use (because once the user
plugs in such a device, we should show the download page).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user plugs in a device on Android we get a device string that
should allow us to figure out which dive computer was plugged in. Make
that string available to the QML UI.
Right now all we do is log it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
add enum to qPref and remove elsewhere
update source core to reference qPref.
the enum cannot be in pref.h because it is to be used in qml and Q_ENUM
need the enum to be defined as part of the class
Signed-off-by: Jan Iversen <jani@apache.org>
Use Q_ENUM instad of Q_ENUMS (which is depreciated) since it does the
meta registration for all Qt platforms.
Q_ENUM require the enum to be defined in the class and cannot refer to
a global class, therefore copied enum to class.
This commit is made to get the release to work, with minimal changes,
this class will be moved to qPref and the double definition solved
Signed-off-by: Jan Iversen <jani@apache.org>
Remove cloud_storage_status from qmlprefs.h.
usage to qPref::
enum cloud_storage_status is not used from C, but only from C++, and
having the same structure defined multiple times is a maintenance
challenge.
Signed-off-by: Jan Iversen <jani@apache.org>
The clipboard fails if we attempt to copy more than 1MB of data. But the
data buffer used is shared between all transactions 'in flight' and we
cannot tell what else is currently using that buffer. Limiting ourselves
to 500k of text for the logfiles seems reasonable and hopefully makes it
more likely that the transaction will succeed (sadly, Qt doesn't tell us
if it failed).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On some devices (e.g., a Sony Xperia phone) the GenericDataLocation is
not app writeable. Instead of just giving app, try a few other default
locations as well (and since all of these are actually string lists,
try all of the options that Qt gives us).
Reasonably, we should only set the libdivecomputer logfile name if we
found a writeable location.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way the user doesn't inadvertantly end up with information from a previous
run of Subsurface-mobile when they copy the logs to the clipboard.
Not sure we should do the same when building for desktop, so right now it's
only when building for a device.
Reported-by: Thomas Fänge <thomas.fange@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We want to allow people to keep dives they collected without a cloud
account. The code was mostly there, we just got confused about the
existing status because we ran through this twice (no cloud -> unknown
-> verified). This way we explicitly remember this kind of transition.
Fixes#1404
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
add settings variables/functions to qmlprefs
remove settings variables/functions from qmlmanager
change manager. to prefs. in qml files for setting variables/functions
Signed-off-by: Jan Iversen <jani@apache.org>
Remove Q_OBJECT and qml properties from DCDeviceData class
Remove DCDeviceData register from mobile-helper.cpp
Change DCDeviceData constructor to be without parameters
Signed-off-by: Jan Iversen <jani@apache.org>
Subsurface-mobile has a long startup time; in order to isolate the problem(s) a
timer is added to see where time is "lost".
The collected startup times are added to the clipboard together with the other
logs, allowing test users to report back.
All this is only enabled when compiling with -DENABLE_STARTUP_TIMING
Closes#1340
[Dirk Hohndel: collapsed multiple commits and minor white space cleanups, added
missing QMutex variable]
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The reply member variable was used to access the reply in the
handleSslErrors, handleError and retrieveUserid slots. This is a
very scary proposition in the light of multi-threading. Instead,
the reply can be accessed by using the QObject::sender() function.
Thus, we can remove the member variable.
The request member was just downright weird. This was only used
locally to describe a network request. Since QNetworkAccessManager::get()
copies the request, it can be destructed right away. Nevertheless,
the data was kept as a subobject. Remove member and make it function-local.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Read libdivecomputer.log file and append to clipboard
Remark, subsurface_open is not available in iOS so using
QFile instead.
Signed-off-by: Jan Iversen <jani@apache.org>
Users need a simple way to report download problems. Asking them
to go into settings, activate logging, and repeat the download
is too much.
libdivecomputer.log will always be generated, but overwritten, with every
download, so the latest log is ready.
The download is very slow due to BT, so there are no impact of having the log
active, neither in terms of size (a concern on small mobiles) or write time.
Signed-off-by: Jan Iversen <jani@apache.org>
on iOS it is practically impossible to copy the App log
to e.g. a mail! in iOS 11 the log file is stored within
the subsurface container and you first need to copy (actually
using the clipboard) out from there to the "normal" document
shared space, before it can be used.
At least iOS users (and I believe Android users) are not really
used to work with files, so the process is not easy to document
in an understandable way.
The alternative is to provide a button, which simply puts the
log on the general clipboard, allowing it to be pasted in a
multitud of applications.
Signed-off-by: Jan Iversen <jani@apache.org>
fake_dc() used to return a statically allocated dc with statically
allocated samples. This is of course a questionable practice in
the light of multi-threading / resource ownership. Once these
problems were recognized, the parameter "alloc" was added. If set
to true, the function would still return a statically allocated
dc, but heap-allocated samples, which could then be copied in
a different dc.
All in all an ownership nightmare and a recipie for disaster.
The returned static dc was only used as a pointer to the samples
anyway. There are four callers of fake_dc() and they all have access
to a dc-structure without samples. Therefore, change the semantics
of fake_dc() to fill out the passed in dc. If the caller does
not care about the samples, it can simply reset the sample number
to zero after work.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
So far we only wrote messages to subsurface.log on Android (since we couldn't
figure out how to make that file user accessible on iOS). Now that that's
fixed, we also need to actually write to the file in the first place.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
By creating it in the Documents path and setting the two magic keys,
iOS will make the log file available to the user.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
strdup(qPrintable(s)) and copy_string(qPrintable(s)) were such common
occurrences that they seem worthy of a short helper-function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace constructs of the kind
s.toUtf8().data(),
s.toUtf8().constData(),
s.toLocal8Bit().data(),
s.toLocal8Bit.constData() or
qUtf8Printable(s)
by
qPrintable(s).
This is concise, consistent and - in principle - more performant than
the .data() versions.
Sadly, owing to a suboptimal implementation, qPrintable(s) currently
is a pessimization compared to s.toUtf8().data(). A fix is scheduled for
new Qt versions: https://codereview.qt-project.org/#/c/221331/
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
registerError() may be called from a different thread context. Passing
the message as a const-reference may lead to a dangling reference.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As we need to update our new stringlist models on multiple
locations, just refactor them into a new function.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
See also e6e1473e6. The construction of the locationlist
was not the same as the 3 previous lists, and it needs
the inclusion of a new model file (divelocationmodel.cpp)
in the mobile app. In addition, as the mobile app is mainly
interested in a simple stringList (model) to populate a HintsText
field (or maybe later a combobox), this stringlist is added
to the model, to easy interfacing with QML.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
See e6e1473e6. Exact same commit but here for the
list of divemaster. The careful reader will spot a
small addition to the clearDetailsEdit() QML function.
Two more field are cleared.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is the first of a set of commits that are (very) similar.
It appeared that a number of more or less static lists, which are
constructed by a loop over all dives in the logbook, were executed
when changing focus to a next dive. For example, the in this
commit addressed list of used dive suits.
What was wrong was that the suitList was linked to a dive. There
is only a need to construct the list of used suits when data is
changed (and obviously, once on startup of the app). Further, it
appeared that a lot of code was duplicated and that we can use
(in this case) the same code from the desktop completionmodels.cpp.
Basically, this commit involves the following changes:
- include completionmodels.cpp in mobile and desktop (so move
it from the desktop only category to the generic category).
- remove double code from DiveObjectHelper.cpp
- Do not differentiate in the init phase and the normal refresh
of the list
- the per dive logic is now only the getting of a previously
constructed list (in init or update of the divelist).
There are no visible changes in the UI, other than a better
performance when scrolling over dive details.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Remove the global error buffer and pass the error string directly
to the frontend. The frontend is then responsible for accumulating
errors.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of manually logging errors after each potentially
error-producing function, use the error-callback. The error texts
are accumulated in the QMLManager object for further use.
The text is transported to the QMLManager object via a queued
connection. Thus, errors can be reported from other threads
without having to deal with manual locking.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
QMLManager::tryRetrieveDataFromBackend() was a one-liner calling
void QMLManager::checkCredentialsAndExecute() with a pointer-to-member.
The latter was never called with a different pointer, therefore
fold the latter into the former and remove the indirection.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the timer will be started on first message anyway, we might
just start it at application startup.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was probably an oversight - the timer was only shown for very
specific messages. This was change to show the timer for all messages.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These were assigned the member variables QMLManager::m_cloudPassword
and QMLManager::m_cloudPassword. Use the member variables directly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
QMLManager was full of redundant getter functions of the type
bool QMLManager::locationServiceAvailable() const
{
return m_locationServiceAvailable;
}
These can be removed changing READ keywords to MEMBER keywords
in the QPROPERTY declarations.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There are ca. 50 constructs of the kind
same_string(s, "")
to test for empty or null strings. Replace them by the new helper
function empty_string().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a somewhat hacky commit. For a very long time, the delete
from the divelist on mobile crashed. That is, not always for anyone,
but for me almost consistently. This commit tries to solve it.
I found that trying to save the delete immediately after removing
data from the underlying model seemed to cause the crash. Hacking
around, I found that a simple beginResetModel/endResetModel between
the delete of the underlying model data and actual save is
sufficient to solve the crash.
The big question is, why does this all work? I suspect some of race
condition between deleting model data, and giving the QML engine
the opportunity to do its thing.
This is also related to issue #311, but that is not implemented
here.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is the only case where C-code sets the current file.
Remove this call for a better separation of C-backend and
C++-frontend parts.
There were four callers of clear_dive_file_data(). Two of them
would call set_filename() anyway. For the remaining two add an
explicit call to set_filename().
This commit fixes a bug introduced in commit b3901aa8f9:
The cloud-online menu entry was still enabled after "closing" the
cloud storage.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In QMLManager::saveCloudCredentials(), clear_dive_file_data() was
called just before calling openLocalThenRemote(). The latter calls
the former anyway, so remove the former.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
See issue #949. In the dive list, dates are shown in short format, and
when we start to edit an existing dive, the date field on the edit
page is shown in sort format. However, when adding a new dive, the
initial date shows up in long (normal) format. This in not only
inconsistent, but also introduces the parsing problem, as described
in the mentioned issue.
This can be fixed by using short formatted dates in all cases in
the mobile app. As the screen real estate is precious on mobile,
this seems the most logical choice.
Fixed: #949
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This commit fixes a very subtle bug. Probably there for ages,
but never noticed. When manually adding a dive, and canceling
the add right away, the divetable was extended by 1 dive (using
the core function add_single_dive), but canceling never removed
that dive (using delete_single_dive). This is corrected here.
Notice that commit ef543da5af claims to fix issue #950.
With this commit, however, that issue can be seen sometimes
again.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Instead use the application-wide instance. Creating a local
object defeats the whole purpose of these objects - nobody
can receive signals in case the settings changed.
No other cases of locally created SettingsObjectWrapper
objects were found.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This fixes an annoying bug. When entering an existing divesite
in the mobile app, always a new divesite (with same name) was
created, resulting in multiple sites on the same gps location.
So, be more carefull in checking and creating a new site.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
While the autocomplete function only works for the first entry
adding multiple comma separated buddies can still be done.
Fixes#608
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Otherwise the divecomputer has to be in pairing mode
at app start time.
Unfortunately, this leaves less space for the progress message.
My time/qml knowledge does not suffice to move that to the next line
(when moving that out of the RowLayout it overlaps with
the buttons).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
