The former should be translated but not those that
go to xml/git.
... and fix capitalization of pSCR.
Suggested-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Reactivate printMode true for ssrf-mobile to avoid font problems,
do not discard events if ssrf-mobile (even though printMode is true)
Signed-off-by: Jan Iversen <jani@apache.org>
On deletion of a single or multiple pictures, the whole DivePictureModel
was repopulated, which was clearly visible in the UI, owing to the
reconstructing of all images in the profile plot.
To avoid this vexing behavior, implement proper deletion routines in
DivePictureModel and ProfileWidget2. Since this needs sensible erase()
semantics the QList<PictureEntry> member of DivePictureModel was
replaced by a QVector. A QVector should be the default anyway, unless
there are very specific reasons to use a QList (which actually is
a deque, not a classical linked list).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the old code a combination of removeRows()/insertRows() was used
to signal a model reset.
Replace this by a single, modelReset signal. This saves a call to
plotPictures() and will allow us to be smarter in the future,
when removing pictures.
Reset-model and remove-items are semantically different.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In MainWindow::current_dive_changed() first plotDive() is called,
which replots all the pictures by calling plotPictures(). This
is pointess, because it plots the pictures of the previous dive.
Then, updateDiveInfo() is called, which resets the dive pictures
and automatically replots them. Thus, switching between dives
both with hundreds of pictures is way slower than necessary.
Switching the plotDive() and updateDiveInfo() calls doesn't work.
The reason is not 100% clear, but it doesn't make sense to plot
pictures of the new dive as long as the profile still shows the
old dive anyway.
As a quick-fix, add a flag to plotDive(), which tells the function
to clear the pictures list instead of redrawing it.
Ultimately, plotDive() should probably be split in two functions.
One for the callers who update the pictures themselves and one
for the others.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
...as the usuage is not anymore about a computer but
a momentary dive mode. Rename the end indicator as well.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The dive profile context menu gets rather long with three
additional divome switches that can be selected. This is now changed
so that the additional options are only shown when in CCR
or in PSCR divemode.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
In the old code, we used to reload the whole picture list on drag & drop
to the profile. Instead, only update the drag&dropped picture and repaint
the profile-pictures.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
1) The connection for the display of CCR-setpoint o2SetpointGasItem
was erroneous, being connected to partialpressuregasSettings. It
is now correctly connected to technicalDetailsSettings.
2) The colour of the setpoint graph is changed from PO2_ALERT (red) to
an orange colour in order to show setpoint in red only when it
exceeds 1.6. This emphasises the visibility of red parts of the
gas pressure graphs whenever gas limits are exceeed.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
fake_dc() used to return a statically allocated dc with statically
allocated samples. This is of course a questionable practice in
the light of multi-threading / resource ownership. Once these
problems were recognized, the parameter "alloc" was added. If set
to true, the function would still return a statically allocated
dc, but heap-allocated samples, which could then be copied in
a different dc.
All in all an ownership nightmare and a recipie for disaster.
The returned static dc was only used as a pointer to the samples
anyway. There are four callers of fake_dc() and they all have access
to a dc-structure without samples. Therefore, change the semantics
of fake_dc() to fill out the passed in dc. If the caller does
not care about the samples, it can simply reset the sample number
to zero after work.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If there is no current dive, the macro current_dc returns NULL.
This led to a null-pointer dereference.
Reported-by: Martin Měřinský <mermar@centrum.cz>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This commit allows plotting the OC-equivalent pO2 graph for PSCR
dives. This happens in both the cases where there is no external
O2-monitoring AND when there is external pO2 monitoring. The
calculations are only done for PSCR dives and is achieved as
follows:
1) Within plot-info create a pressure-t called OC_pO2 in
profile.h and populate this variable with the open-circuit
pO2 values in profile.c.
2) Create a new partialPressureGasItem ocpo2GasItem in
profilewidget2.h and, in profilewidget2.cpp, initialise it
to read the plot-info OC_pO2 values and enable its
display by using the setVisible method. The
diveplotdatamodel was also touched in order to achieve
this.
3) Create a pref button that controls the display of OC-pO2 for SCR dives
4) Change the colour of the OC-pO2 grpah to orange
5) Change the connection of the crr_OC_pO2 signal to be appropriate
6) rename the OC_pO2 attribute to scr_OC-pO2
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Only update those pictures of the DivePictureModel that actually changed.
This will be useful once pictures are loaded incrementally.
To do so, replace the pictures array by an array with stable ids. Before
this commit, not-shown pictures are left out of the pictures array, which
makes the mapping from DivePictureModel-ids to the picture array index
non-trivial.
Replace the QList<DivePictureItem *> by a std::vector<std::unique_ptr<DivePictureItem>>
to ease memory management. Sadly, owing to COW semantics, QVector is incompatible
with QScopedPointer.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Correct a bug in finding the minimum heartrate.
Use the minimum and maximum heartrate value to set min/max and
tic distance for the heartrate axis in the profile.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Replace constructs of the kind
s.toUtf8().data(),
s.toUtf8().constData(),
s.toLocal8Bit().data(),
s.toLocal8Bit.constData() or
qUtf8Printable(s)
by
qPrintable(s).
This is concise, consistent and - in principle - more performant than
the .data() versions.
Sadly, owing to a suboptimal implementation, qPrintable(s) currently
is a pessimization compared to s.toUtf8().data(). A fix is scheduled for
new Qt versions: https://codereview.qt-project.org/#/c/221331/
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Mostly replace "return (expression);" by "return expression;" and one
case of "function((parameter))" by "function(parameter)".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The settingsChanged() function of the profile widget tries to be
clever and tries to prevent not needed replots of the profile.
I'm not sure this is very relevant in the first place as change
of settings are almost instantly, with or without replot. It
appears that replot is always executed when there are
calculated ceilings visible. But without calculated ceilings
a replot is "optimized out". This does, however, introduce dangling
divehandles in PLAN/EDIT and ADD mode of the profile, when
any setting that influences the y-axis is changed.
The fix is trivial. Just force a replot in the PLAN/EDIT and ADD
modes.
Fixes: #1070
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The reason for this issue, and fix for this is very similar
to commit b4d37e8ee. Just set both recalculate flags on a mouse
release event, so that the cylinder pressure line is recalculated.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
See mentioned GitHub issue for the full issue, and images.
The reason for this weird behavior is the existence of 2 flags in
the profile code: shouldCalculateMaxTime and shouldCalculateMaxDepth.
When exactly following the use case and test data as attached to
the GitHub issue (a very short dive, shorter than most of the
dives in the logbook), the shouldCalculateMaxTime flag never got
back to its true status, causing the the time scale not to adapt
to other dives when just clicking (or selecting) them from the dive
list.
The problem is fixed here by also setting the shouldCalculateMaxTime
flag on manipulating wayppoints in the dive plan.
Fixes: #1039
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
There are ca. 50 constructs of the kind
same_string(s, "")
to test for empty or null strings. Replace them by the new helper
function empty_string().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move divepicturemodel.cpp to the desktop only category and deal
with the (limited) fallout. We, currently, do not support dive
pictures tied to the profile on mobile, so there is no use
including this code.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Do not pull in the DivePlannerPointsModel::instance as this is not
used in the called function. We (currently) do not support deco
computations on mobile, so trying to pull in any deco state from
the planner is futile anyway.
With this uncoupling, 6 more model files are not needed in mobile
any more.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
All the deleted items were added to the scene, which takes
"ownership" (a remarkably fuzzy concept in Qt) of these
objects. In principle, deleting these items is a bug - even
though it is handled gracefully.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This implements different zoom levels for the dive photos tab as
suggested by Stefan Fuchs <sfuchs@gmx.de> in #898.
The zoom level can be changed using a slider or CTRL+mousewheel.
Zoom levels range from a third of the standard thumbnail size to
thrice the standard thumbnail size.
Thumbnails are cached in maximum resolution and scaled down on
the fly. Because the profile widget took its pictures from the
photo list model, an extra picture copy with a fixed size had
to be introduced.
The UI is still a bit crude.
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Correct way of using indices for rowDDstart and rowDDend.
Reset rowDDstart and rowDDend at beginning of updating dive pictures.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Start a new column a little bit earlier otherwise it will get difficult
to fit a high number of pictures.
Don't put more than ~16 pictures in one column.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
In the dive picture tab show pictures of all selected dive.
But at the same moment take care that in the profile only
pictures from displayed_dive are displayed.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Planning dives is heavy on CPU, so better be sure we only
do it when needed. In particular, when moving around dive
points, we only want a new plan once per move and not three
times (triggered at various points in the chain of events).
This should significantly improve planner snappiness.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
While dragging waypoints around, don't grow the time axis according
to dive duration (including deco stops) as this can explode too
easly resulting in an effectively unresponsive planner. Rather
grow it only (slowly) when a dive handler is moved to the right
10% of the profile.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Icon aliases were complete mess.
Some icons had alias some didn't.
Named with underscores vs. hyphens vs. camelCase.
Lower vs. upper case.
"ICON" prefix vs. suffix vs. nothing.
With vs. without filename suffix.
Some didn't make sence. Eg. mapwidget-marker-gray
(I can see, it's grey, but what does it represent?)
Some were duplicated, eg warning vs. warning-icon.
Some were name after widget, which is wrong.
Do not reinvent wheel. Use widely used naming scheme
close to Freedesktop Icon Naming Specification. This
will enable usage of common icons from current set in
the future. Thus Subsurface will fit nicely to GUI.
This changes icon aliases to one, easy grep-able style.
Signed-off-by: Martin Měřinský <mermar@centrum.cz>
Icon aliases were inconsistent mess. Underscores vs. hyphens vs. camelCase.
With vs. without filename suffix. Lower vs. upper case. "icon" suffix vs.
prefix vs. nothing. Some were duplicated, eg warning vs. warning-icon. Some
icons didn't have alias at all.
This changes all icon aliases to one, easy grep-able style which complies
to Freedesktop Icon Naming Specification (Guidelines).
Signed-off-by: Martin Měřinský <mermar@centrum.cz>
When toggling the display of the partial pressure graph, the graph was
either not shown correctly or unnecessary ticks were left in the graph.
Calling the settingsChanged() method of the profileYAxis object solves
the problem by initializing the ticks according to the selected graphs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Pass the planner state struct to the profile computation so it can use
deco_time and first ceiling to display VPM-B ceiling.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Fixes an obscure bug, which happened under very specific circumstances.
Precodition: fresh program start and neither of the partial pressure
graphs, nor the heat maps are shown. User clicks on heat map icon.
Bug: The heat map is not shown at the bottom of the graph.
The fix consists in replacing two percentageAxis->setLine() calls
by precentageAxis->animateChangeLine() calls.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Change an unsigned integer to a signed integer in profilewidget2.cpp,
because commit 1f8506c changed the definition of duration_t from
unsigned to signed.
Since this value represents the number of seconds since a dive started,
there is no possible chance of overflow problems.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
