The dive-site editing can be reached from two states: from the
dive view and the dive list view. It always jumped back to
the dive view.
Therefore, remember the state. Use a stack-like structure, so
that the feature can be used for the dive-site view as well.
This is a bit inconsistent, because for example the statistics
view does not remember the previous state and allows a direct
jump to a different state. That should be fixed at some point.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This used to be one of the tab-widgets, which was illogical
and caused confusion. Notably, erroneously clicking on the
tab header led to a reset of the dive selection.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Owing to bit-rot, the extradata tab was not disabled if no dive
is selected. The reason was that there was an additional tab
(dive-computers) that should not be disabled. However that
tab was removed and now the extradata tab was not disabled.
Fix this, but note that there is another of these 'parasitic'
tabs, that should be removed, namely the dive-site tab.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The map listens to the reset signal by itself.
This avoids double reload of the map on open/close.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The get_minutes() function formats a time as m:ss
and returns a static C-string. Since all callers are
C++ anyway and transform directly into QString, let us
move this to the other string formatting function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Also allow editing sensor on a cylinder with already attached sensor.
This will swap the sensor data with the cylinder that it is taking the
sensor data from, removing the need for adding an extra temporary
cylinder when swapping two sensors.
Signed-off-by: Michael Andreen <michael@andreen.dev>
No reason to keep this as a macro - a function is easier to
read, type safe and easier to debug. Moreover, give it the
more appropriate name "nearly_equal()". After all, it precisely
does NOT check floating points for equality.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The FP_IS_SAME macro uses a relative precision to compare
floating points. This fails when comparing to 0. Therefore,
use an absolute precision in this case. Implement as an
inline function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Other overridden functions of this class are marked as well,
so let's do it for this function for consistency reasons.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When there is no map support, selection of dive sites is suppressed.
There is no point in calculating the selected dive sites in this case.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If the entries in the DiveLocationModel don't have their entries
set as editable, the auto-completion popup turns of composition
if such an item is highlighted (see Qt code in
/src/widgets/itemviews/qabstractitemview.cpp), thus disabling
composition of multi-key characters.
Therefore, set this flag. Seems weird, but what should we do!?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is crazy: when view() is called, the dive-site-suggestion
popup (DiveLocationListView) clears its WA_InputMethodEnabled
flag. This makes key composition not work as long as the
popup is open.
Thus, when showing the popup, explicitly set the flag.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Adds a preference setting in the "Default" settings tab to toggle whether
to display shortened names in the Map.
TODO: instead of using the generic "settingsChanged" signal, it would be much
more efficient to only update items based on the actual setting which was
changed.
Signed-off-by: Michael WERLE <micha@michaelwerle.com>
Attn: horrible hack!
For some reason the completion-popup does not have the
Qt::WA_InputMethodEnabled flag set. Thus, if the popup is open
composition of characters breaks.
Therefore, when starting completion, explicitly set the flag
on the popup.
This is 100% not how this was intended, but seems to work for
now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The TagWidgets hook into the textChanged() signal to invoke
the word-completer. However, that signal is also emitted for
composition-keys, making composition impossible if the completer
decides that it should show some entries.
Instead, hook into the inputMethodEvent() function, where one
can test whether a real character was input.
Also, don't hook into cursorPositionChanged(), since that led
to an uncanny cascade of reparse() calls when editing text.
The UI experience is still rough as sometimes the completer
popup steals the focus and hinders further entry.
Also, this doesn't fix the location field, which is its own class.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
State requirements for email address and
password format within cloud preferences UI
If email address or password entered in cloud
preferences, raise a warning within a
QMessageBox instead of the less-visible
report_error method
Signed-off-by: Jon Massey <jon.massey@thedatalab.org>
This allows having 3m depth grid for metric users.
* All original properties ( named diferently ) were renamed to three_m_based_grid everywhere to be consistent.
* Plus other small changes requested during review.
Signed-off-by: Vlad A. <elf128@gmail.com>
Signed-off-by: Vlad A <elf128@gmail.com>
Because of the old connect syntax used the incorrect signal names weren't
caught at compile time. To switch to the new syntax we had to make two
functions pure virtual in the WebServices class - let's hope I got that right.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Making this simply depend on Qt5 or Qt6 was short-sighted as work on QtLocation
upstream continues. Instead break this out as its own option.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The undo stack is only relevant to the dives that were loaded at the
time the command was executed. If a file is closed, by specifically
closing it or opening another file, then the undo commands will
reference dives that aren't available anymore. Clearing the undo stack
ensures that we don't crash or accidentally do some undefined
modifications to the currently open file.
Signed-off-by: Michael Andreen <michael@andreen.dev>
To import media files from the web, increas the size of the
dialog box and allow several URLs separated by newlines.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Way back in time, in HwOS 1.86 a CCR mode was added which automatically
switched between setpoints based on depth.
This entry was never added in our system to configure the dc, and caused
the issue seen in #3304
This adds the Auto SP mode, to the dropdown, thus fixing #3304.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
The only things in display.h were profile related, so the
split between these two files is not comprehensible.
In fact profile.h includes display.h, because it needs the
struct defined therein. Let's just merge these two files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only caller misused this function to get access to the
current divecomputer. Remove it, since selection of the
current divecomputer is handled by the MainWindow.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There were only three users of that. For now do it inline, but
we may think about a separate function, which is only available
on desktop.
Moreover, add nullptr-checks, even if they are not strictly
necessary.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
CID 376698 was a false positive, but understandable.
It is very hard for Coverity to realize that current_dive
cannot be null if editedDive is not-null.
By replacing current_dive by originalDive, the alert
should go away, since the latter is not checked for null.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a column to the equipment table that shows if a sensor is attached to a
tank, or which sensors would be available to attach to a tank that currently
doesn't have a pressure sensor associated with it.
Changing the sensor assignement can be undone.
This column is hidden by default as this is a somewhat unusual activity.
Signed-off-by: Michael Andreen <michael@andreen.dev>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This file was so confusing: A tabwidget containing a layout
containing a tabwidget. This strange situation is probably
due to moving the multi-dive warning message.
Remove the file, there seems to be nothing of importance
in there. All the UI was moved to the individual tabs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, when the profile is in edit mode, the user can't
save, exit, plan a new dive and is requested to save the
current dive. However, this makes no sense anymore, since
the profile always switches to edit mode when showing a
manually added dive.
If the user has any unsaved profile changes, the usual
dirty checks of the undo-system apply.
Only show above behavior when in the planner. There it is
useful because, these are not included in the undo system.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The edit mode was hidden in a context-menu. With fine-grained
undo there seems to be no need to explicitly exit edit mode.
Therefore, always switch to edit mode when displaying a
manually added dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was always this weird asymmetry that the "maintab" widget
is one of the tabs itself, whereas the additional tabs were
treated as extra-widgets. Turn the first tab into explicit
source files to make the distinction between container and
content clear.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This only calls MainWindow::showProfile(), so simply call
that directly.
Moreover make two "public slots" private member functions,
since these were only called locally.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When the user undos/redos the profile should update even
when in edit mode. This is a bit more complicated than
anticipated:
1) We should not do the update when emitting an undo command
from the profile. But we *should* update if it is an undo
command from the maintab (change depth/time).
2) The divepointsplannermodel has to be reset. Side note:
the code is truly abysmal as it sends numerous changed-signals.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Place undo commands for every change of the profile, not
only on "saving". Move the edit-mode from the mainwindow
and the maintab to the profile widget.
This is still very rough. For example, the only way to exit
the edit mode is changing the current dive.
The undo-commands are placed by the desktop-profile widget.
We might think about moving that down to the profile-view so
that this will be useable on mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These two actions were using the same command with a flag
controlling the name of the command, which is shown in
the undo menu.
However, the replanDive does much more (such as changing
the notes) and in the future we may want to be more
fine-grained with respect to profile editing. Therefore,
split these commands into two separate ones.
Moreover, make the editProfile command more flexible.
Pass an enum describing the action instead and also
a counter indicating how many points have been
moved or removed.
Finally, don't consume the input dive in the editProfile
command, because we will want to keep the original dive
while editing the profile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It appears that the QML object that is created when assigning the source
to the StatsView in the ui can be garbage collected and therefore
destroyed and re-instantiated without our knowledge. So instead of
trying to keep a pointer around, we end up looking up the object address
when needed.
We still ask the JS code to not garbage collect the object - but that
clearly isn't enough to prevent it from being destroyed when the parent
widget changes.
Without this fix opening the statistics will crash with Qt6.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The QVectorIterator is only available in Qt6 when you explicitly add the
include files.
Suggested-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
