first quick and dirty port of the imports to Kirigami 1.0
(using system installed for now) adapt to api changes and
try out some of the proposed ui changes from the HIG
Signed-off-by: Marco Martin <notmart@gmail.com>
This is hard coded in version.cmake for now. The intent is to go to 1.0 in
the first release version and to increment from there whenever we create
an update.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With the current release candidate of Qt 5.6.0 we get into an infinite
recursion of the grid layout engine. This had happened before (prior to the 5.6
beta) and it appeared that setting the maximum width of the columns was
sufficient to fix this. But with the RC even that isn't sufficient, so now we
give up on having QML figure out the best possible column width and hard code
both preferred and maximum width to the same, predefined values. That's a total
shame, but at least now we can build against Qt 5.6 without infinite recursions
and crashes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
don't create a local PassiveNotification copy,
use the global show/hidePassiveNotification from
ApplicationWindow, now that it works
Signed-off-by: Marco Martin <notmart@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All error cases need to reset it as well.
And it's easier to reset it right after we come back from parse_file()
instead of trying to track all the exit cases after that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And hide the notification either after 5 seconds or once we are done.
This requires an extension to the Kirigami components that isn't upstream,
yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Oops, I forgot to take the sort model on top of the model into account.
Now everything should stay consistent - ListView order when accessed from
QML, but internal order when accessing the underlying array.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When manually adding a dive and moving it in the dive list (by editing
it's start time) we could create a situation where the dive list
internally was correct, but the dive list model on screen showed an
incorrect dive list with the new dive in two different spots.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't do the slow motion scrolling through the list if we previously
showed a different dive in the list.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code is very similar to the undo code in the desktop UI, but
untangling that from the desktop seemed massive overkill; we don't have
lists of dives to delete and undelete here - so this is actually much
simpler and easier to maintain (I hope).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dialog gives the user 3 seconds to undo the delete and then disappears
without any user interaction.
This isn't hooked up, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This reduces the margin to use more of the available space and also makes
the first column slightly wider so the word "Cylinder" isn't broken on a
Nexus 6p.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Normally this is triggered when the DiveDetailsView component is
completed, but since QML isn't recreating this component unless we switch
to a dive a couple of spots in the dive list away from this one, we
wouldn't get any changes in the data reflected in the profile.
But since this now redraws the same dive that potentially was drawn last,
we need to make sure we call plotDive() with force=true.
I also suspect that this could help with the strange bug that sometimes we
show a blank profile after certain edits.
See #1013
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows the user to delete the currently shown dive. This action takes
effect right away, no confirmation, it gets right away written to the
local git cache.
One idea for an undo operation here could be to simply reset the git tree
to HEAD^ and reload. Not elegant, but would work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't allow negative depth or depth beyond 500m.
Additional checks that the gas mix is possible (even thought QML code
SHOULD only allow valid combinations).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The input is restricted to
EAN100
EANxx (with 'x' one of 0..9)
AIR
xx/xx (with 'x' one of 0..9)
xxx (with 'x' one of 0..9 and the number <= 100)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We (ab)use fake_dc() to create a pleasing profile for a manually added
dive. Based on it's intended use, fake_dc() simply handed back a dc
structure that pointed at staticly allocated samples - that's obviously
(now that I think about it) going to blow up in my face if I edit a
manually added dive more than once.
So now we have an option for fake_dc() to actually allocate the samples -
this way the rest of the code can treat these samples as we would treat
samples created any other way. We can free them and replace them with a
new set.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We only need to deal with this if the dive changed. And in that case, if
we calculate a new fake DC, we need to clear out the meandepth as
otherwise the algorithm will try to match both max and mean depth. Since
the user potentially changed the max depth that could have very odd
consequences.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the user explicitly sets the units when editing or adding dives, we
used to change the display preferences. This was changed for some but not
all fields in commit 6252d0cd3b ("While parsing weight and pressure we
should not change the users settings")
Now we do this consistently for all inputs.
Also, when editing the depth of a manually added dive, we now throw away
the samples (as those are certain to be inconsistent).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A dive with zero duration creates an odd profile that is 2min 30seconds
long and looks just weird. Instead, simply show a text that there is on
profile shown for such a dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is more consistent with the rest of our UI
To make this work you once again need changes to the mobile components
that aren't upstream, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
First cylinder only, show warning if there are more than one cylinder defined.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now it is possible to enter a specific unit that is different from the
unit stored in the preferences. If only numbers are inputed the unit will
be the same as specified by the users preferences.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Android users are well used to using the back key for this. I kept the
code in place as things may end up completely different on IOS or other
mobile platforms.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should have been obvious. Without explicitly asking for only local
git activity, it will connect to the remote.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows us to shrink the top bar quite a bit and have a little more
screen real estate. In order to maintain functionality we need to reenable
the context menu on some screens.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since some users report hangs when changing credentials it would be useful
to see how far the application got.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This doesn't quite work yet as the start page appears to miscalculate its
height (the cloud credentials page appears to be missing).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make things centered, lay them out correctly, make sure the image fits.
This includes the re-indentation of the previous commit - but the changes
are so massive that it seemed pointless to do this as its own commit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Otherwise, when switching back and forth between two logins, during the
second switch the dive list is not loaded as the code checks against the
remembered git SHA before rewriting the dive list.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Otherwise Qt attempts to be smart and re-uses previously successful
username (email) and password. This is an odd corner case, but it seems
the right thing to do.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With the integration of the credentials into the start page the logic for
this has changed.
Since the code for start page and dive list is actually on the same page,
using opacity to switch between the two sub pages (depending on whether we
have valid credentials and dives to show), the old way of changing
credentials no longer worked.
With theis patch the user once again can change their credentials (and
change their mind and go back to the dive list).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are several parts of the UI that will do better if they know if the
credentials that we have are incomplete (e.g., no password), invalid
(server rejected them), valid (server accepted them) or potentially valid
(we found a local cache for the email address, so that's likely correct,
but because we are offline we cannot (or have not yet) verify the
passord).
So far this is specific for the mobile UI - it might make sense to try and
use the same backend code and status tracking for desktop and mobile.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For the ThemeTest we could simply drop the item, for the GPS preferences
and the DowbloadFromDiveComputer page everything got indented by one
level.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Reported by a beta tester for the GPS preferences, but affects a couple
more. We need to make sure that any page on the page stack is actually a
MobileComponents.Page, other wise the Android back key doesn't close the
page.
This commit changes GPS preferences, the theme test, and the currently
disabled download from divecomputer. it contains only the actual change
(wrap the current content in a page). The reindentation is a separate
commit for readability.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It now explains the relationship between Subsurface-mobile and the desktop
application and allows the user to enter the cloud credentials right
there.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of using this on its own page, it makes more sense to use it as
part of the start page directly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This isn't pretty, but having the version string available on a place
that people are likely to find does make sense when going public with
the Subsurface-mobile. Especially when we do a public release, I assume
the developer menu with App log might not be readily available for
people to identify their installed version.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When editing the duration of a dive, if only numbers are entered they are
treated as full miuntes.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A dive would linger in edit mode when following these steps:
start mobile. show theme info. click on dive in dive list.
click edit. click back in topbar, again click back in the topbar.
click on dive in dive list, still in edit mode.
Not anymore. Also enable back button when viewing a dive.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I don't know how this got here. Probably having fun
with copy and paste.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The app log and theme info had context menus
with a single close item. No need for that.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
First cylinder only, show warning if there are more than one cylinder defined.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to execute the same sequence of steps both when starting the app
and when switching cloud credentials. This way things will work correctly
when the device is offline and the user wants to switch accounts.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Even setting things up in the first row isn't enough. Every field in the
grid needs an explicit width. How dumb is that.
To make this more manageable calculate the correct widths at the beginning
and then just reference those properties.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order for wrapping to work, the Text and TextEdit elements need to have
a defined width. Normally the GridLayout is supposed to be able to figure
out optimal widths for the different colums if you tell it which ones
should stretch, but that has repeatedly caused infinite loops and crashes
in the layout engine.
For now, in order to get both wrapping (and therefore no clipping of the
content) and avoid crashes, we hard code the width of the four columns by
setting Layout.maxWidth for each element in the first row of the grid.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Let's put the three likely rather narrow items above each other in the
right column and the others (especially the three that could run long:
suit, buddy, dive master) in the left one.
Also, make the individual entries more consistent in which attributes are
set in which order - easier to read.
Finally, make sure that all grid elements enable wrapping.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since this variable is specific to the cloud credentials in use, we need
to reset it when we change credentials.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It makes no sense to only do this the very first time we connect to a
cloud storage account. The existing code only happened to work because we
incorrectly tried to maintain the loadFromCloud status across restarts of
the application. So one bug hid another bug.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
What matters is that the cloud storage for a specific email address has
successfully been synced - and we need to remember this across restarts of
the app. This way Subsurface-mobile can work with different accounts, even
if offline.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This requires mobile components that include commit 03c868fc57e5 from
earlier today. With this a single press on the back key cancels the edit
and a second press on the back key brings you up one level in the page
stack (usually back to the dive list).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we currently only have preferences that affect the GPS
functionality, it might be more logical to have the preferences under
GPS menu.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Warning M126: == and != may perform type coercion, use === or !== to avoid it
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adds a back button in edit mode, and an edit button for view mode.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
