The UI was updated before storing the dive. This had a nasty
effect: the current dive was shown in the profile and if that
was a manually added dive, the DivePlannerPointsModel was
overwritten. Thus the planned dive couldn't be saved anymore.
There is a comment why the UI switch was done beforehand.
But in my tests, this didn't seem to be valid anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Place undo commands for every change of the profile, not
only on "saving". Move the edit-mode from the mainwindow
and the maintab to the profile widget.
This is still very rough. For example, the only way to exit
the edit mode is changing the current dive.
The undo-commands are placed by the desktop-profile widget.
We might think about moving that down to the profile-view so
that this will be useable on mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Coverity warning: divedatapoint::minimum_gas was not initialized
in DivePlannerPointsModel::addStop.
I don't know the meaning of that member variable and therefore
cannot tell if this was a real issue.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On the equipment tab, unused cylinders (automatically added,
no pressure data) could be hidden. This was implemented using
a QSortFilterProxyModel.
Apparently, it causes confusion if cylinders in the middle of
the list are hidden. Therefore, only hide cylinders at the end
of the list.
QSortFilterProxyModel seems the wrong tool for that job, so
remove it and add a flag "hideUnused" to the base model. Calculate
the number of cylinders when changing the dive.
This is rather complex, because the same model is used for
the planner (which doesn't hide cylinders) and the equipment
tab (which does). Of course, syncing core and model now becomes
harder. For instance, the caching of the number of rows was removed
in a37939889b and now has to be
readded.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This makes sure that the dive plan is updated (including the
planner notes) when parameters of the dive or the planner
change.
This fixes a bug reported by Jay Anchor.
There is a chance that by partly undoing 77a6bc6d62, this
introduces too many recalculations of the plan. But without
this patch, there are definitely not enough recalculations.
Reported-by: Jay Anchor <jay.anchor-subsurface@e257.fi>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
A change not to compute plan variations when not needed
was too aggressive and eliminated also the signal to update
the notes. Bug fixed.
Reported-by: Jay Anchor <jay.anchor-subsurface@e257.fi>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
There are two cases in this function: with and without holding
the control-key. The former deletes one point, the latter all
points starting with the selected point to the end.
The code was interlaced making it very hard to reason about.
Notably, it was buggy: with control, all points could be
deleted, leading to a crash.
Split the function in two versions, with their own bound
checking. This produces a bit of duplicate code, which
might be broken out later.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When updating the dive profile, a thread is started to calculate
plan-variations. This is done even when only editing the profile
or when variation calculation is disabled by the user. The thread
then exits if it shouldn't calculate the variations.
Turn this around: test whether variations should be calculated
before starting the thread.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
removeDeco() was called by addStop() if the recalc flag was
set. If the caller didn't want to call removeDeco() it had
to clear and restore the flag.
Instead, call removeDeco() explicitly when needed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There are no more external users of this flag, therefore clearing
that flag is a no-op.
Moreover, clear the cylinders array and the preserved_until
flag befor emitting the model-reset signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Split the function in one external version, that updates the
dive profile and cylinders and one internal version, that
does no recalculations. In the latter case, the caller is
responsible for updating the dive.
Thus, the recalculation flag-clearing can be removed from
removeDeco().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In planner or profile-edit mode, the plotDive() function takes
the current plan and turns it into a dive profile. Not only
is this a layering violation (the display layer modifying the
dive), it is also fundamentally flawed. The control-flow is
out of control, if you wish. There are numerous reasons why
the profile needs to be replot, many of which do not need
a recalculated dive profile.
Move the code that updates the dive-profile to the
DivePlannerPointsModel. Thus, the profile recalculations
and replots can be pooled. This will break the planner, since
there now might be missing calls to the profile recalculation.
But it already has some positive effects: when removing
multiple points, the profile is only recalculated once.
This will need much more work, but it is a start.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DivePlannerPointsModel::addStop() function is called by
the profile to add a planner-stop. It is also used internally
to create profiles.
If we ever want to include this in the undo system, we have
to split these into to versions. One will ultimately place
an undo command and update the profile, the other one doesn't.
For now, this makes the external interface simpler, as some
parameters are redundant.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DivePlannerPointsModel::createTemporaryPlan() function had
two distinct and independent parts:
1) create the data points.
2) create the dive sample and calculate variations.
The second part was only exectuted if the recalc flag was set.
Out of the two callers, one was explicitly disabling and setting
the recalc flag to avoid the second part.
The much more logical thing is to simply split the function in
two and only call the first part.
To avoid any functional change, the second caller (the profile)
still tests for the recalc flag. However, if it shouldn't replot
a new plan, why calculate it in the first place!? And why does
the display function change the plan at all? This appears all
very ill-thought out and should be changed in due course.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The way the blocks in DivePlannerPointsModel::setData()'s
switch statement were demarked messed with my mind.
There were at least three variants. Let's try to be consistent.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only external user of setRecalc() was turning recalculation
on. In fact, this happened when constructing the planner-widget.
However, for example editing of the profile only works when
the recalc flag is on.
This is all very confusing, let's just turn the flag on by
default and remove the accessor. Internally, the planner can
simply use the std::exchange function to set and reset the
recalc flag.
Perhaps the setting/resetting can be replaced by simple
recalc = true;
...
recalc = false;
pairs. It is unclear whether there is need for recursion.
Something to be investigated.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To remove global state, make the dive that DivePlannerModel
works on a member variable. Pass the dive in createSimpleDive()
and loadFromDive(). Moreover, this should pave the way to more
fine-grained undo in the planner. Ultimately, the planner
should not be modal.
Attention: for now, the dive must still be displayed_dive,
because of the convoluted way in which the profile and the
planner work on the same dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Both loadFromDive() callers were clearing the model before
calling loadFromDive(). Move the clearing into that function
since it makes no sense to load into a non-cleared model.
Apparently this changes the way that no-cylinder dives are
treated and the code in ProfileWidget2::repositionDiveHandlers()
must now explicitly check for that condition.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In DivePlannerPointsModel::clear(), the cylinder model is
updated before it is cleared. This must be an artifact.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There must not be two dive planner points at the same time
stamp, as this violates the laws of physics (and internal
assumptions).
The corresponding test was done in the profile code at
two different places with floating point arithmetics.
This is a bad idea, because
1) code duplication
2) danger of rounding issues
Instead, do this in one central point in the planner model
and use integer arithmetics. Simply add a few seconds until
a unique timestamp is obtained.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When reordering the points, the DivePlannerPointsModel would
not emit the appropriate move signals, but simply a data-changed
signal over all elements. This obviously violates Qt's
model/view API, though it is probably harmless. Let's do
the right thing so that the frontend knows that the selected
item changed place.
Also, emit dataChanged only on the actually changed element,
not all elements.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The beginRemoveRows() function was fed erroneous values. It
is a mystery why this didn't crash. In any case, deletion
of multiple points did not work properly. Instead of trying
to be fancy, remove each point one-by-one.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of inserting the point at the calculated
position, the DivePlannerPointsModel would append it
at the end and then resort the vector. That's just
silly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When clearing the model, use "beginResetModel/endResetModel"
instead of "beginRemoveRows/endRemoveRows".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When clicking on "+" in the planner, a default stop point was
added using a signal/slot connection. This used the archaic
string-based connect syntax, because it was realized with
default parameters passed to "addStop()". Instead, add a
"addDefaultStop()" slot, which passes the default parameters.
Since all other callers do not use callbacks, unslotify
"addStop()". The slot was the only user of the default parameters,
so they can be removed alltogether.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To remove reliance on global state, pass an "in_planner" argument
to decoMode(). Thus, calls to in_planner() can be removed.
This is a more-or-less automated change. Ultimately it would
probably be better to pass the current deco-mode to the affected
functions instead of calling decoMode() with an in_planner
parameter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It simplifies reasoning about control flow a lot if it is known
that functions can't be invoked from a different part of the code
base.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The way the starting time of a new plan was set was bonkers:
1) PlannerWidgets::planDive() invokes DivePlannerPointsModel::
createSimpleDive().
2) createSimpleDive() calls DivePlannerPointsModel::
setupStartTime()
3) setupStartTime() emits a signal startTimeChanged()
4) startTimeChanged is caught by PlannerWidget and sets
the UI field
5) change of the UI field emits a timeChanged() signal which
is connected to DivePlannerPointsModel::setStartTime()
6) setStartTime() sets the time of the plan and displayed_dive
and emits dataChanged()
7) dataChanged() replots the dive()
8) Back in DivePlannerPointsModel::createSimpleDive() the diveplan
start time is overwritten with displayed_dive (the value are
equal owing to 6)
Wow!
But it gets worse:
9) The initial dive plan is set up in createSimpleDive().
Since the profile is drawn in 7) after clearing the displayed_dive
and before constructing the initial plan, the profile is shown
on a dive without samples. It therefore generates a dummy profile.
To make this somewhat less insane, remove the startTimeChanged()
signal in 3), explicitly set the start time of plan and dive to
the one calculated by setupStartTime() and explicitly set the UI
filed in the plannerWidget.
This still indirectly draws the profile via signals in a convoluted
way, but at it straightens out things somewhat. Most importantly,
the profile doesn't have to generate a fake DC.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The in_planner() function is problematic, because it depends
on the application state that is only available on desktop.
If we ever want to port the planner to mobile, we have to get
rid of it. Luckily, the DivePlannerModel already has an
appropriate flag that can be used instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since dive.c is so huge, split out divecomputer-related functions
into divecomputer.[c|h], sample.[c|h] and extradata.[c|h].
This does not give huge compile time improvements, since
struct dive contains a struct divecomputer and therefore
dive.h has to include divecomputer.h. However, it make things
distinctly more clear.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
You cannot be at two depths at the same time (and it confuses
the planner). So give yourself at least 10 seconds.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When setting up a dive for replanning, we ignored zero length segments as those
tend to be generated by gas changes. But it is possible to enter those in the
planner and the replanning should not ignore those. So be
more clever about gas changes. Let's add 10 seconds so we are not at two depths
at the same time and help since add_stop also does not like zero length
segments (it thinks we are trying to replace a waypoint).
Fixes#2901
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In analogy to the timestamp -> QDateTime conversion, create a
common function.
1) For symmetry with the opposite conversion.
2) To remove numerous inconsistencies.
3) To remove use of the deprecated QDateTime::toTime_t() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the planner the undo commands for adding / editing dives were
only called if not on mobile. This is from days were mobile didn't
have undo commands. We can remove these now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was only one caller of MainWindow::setupForAddAndPlan() left
and that caller immediately called DivePlannerPointsModel::createSimpleDive().
Thus, we might just as fold the former in the latter and thus
concentrate all the prepare-dive-for-plan business in one place.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Thus, the MainWindow doesn't have to extract the plan from
displayed_dive. This is a tiny step in an attempt to detangle
the interfaces. The bigger goal will be to make displayed_dive
local to the planner.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When calculating variations, they were sent to the mainwindow,
which updated displayed_dive accordingly. Do this directly
in the planner-model.
The idea is to detangle interdependencies and to make the
code reusable (planner on mobile?).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This will be temporarilly used by the planner to mark consumption of
air at the surface. Do this by creating a new function add_cylinder,
which replaces add_to_cylinder_table() and takes care of always adding
a dummy cylinder at the end of the table. Make the original
add_to_cylinder_table() local, so that it cannot be accessed anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The planner does not know about events except gas
changes. But if the dive comes from the log, we
should preserve the dive computer events. At least
those that happend before we started to delete
waypoints to let the planner take over.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
On desktop, we have two CylindersModel concurrently: One in the
planner and one on the equipment-tab. They act differently, because
the former modifies displayed_dive directly, the latter issues
undo commands.
To differentiate, we used the in_planner() function. However, that
appears extremely brittle, especially when combined with undo-commands.
Therefore when generating the model, pass in a parameter that says
whether this is for the planner or the equipment tab and use
that flag to decide how to act.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The CylinderModel always accessed the global "displayed_dive" and in
some special cases also "current_dive". To implement cylinder undo,
the model should work on an arbitrary dive. Therefore, in analogy
to the weight model, make the dive dynamic.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Nobody was ever listening to this signal(?) and the last sender
was removed in ac52034778.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the planner we used to filter out "unused" cylinders as in the
equipment tab. It is unclear whether that makes sense or can even
easily be reproduced, since such cylinders have to come from an
imported dive.
To be on the save side, let's not do this. Replace the
CylindersFilteredModel introduced recently by a plain
CylindersModel.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The cylinder-model had an instance() function, but actually
there were two cylinder models: one used by the equipment tab,
one used by the planner.
This is misleading. Therefore, remove the instance() function
and make the cylinder-model a subobject of the planner-model.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
