Add an option for users to sync the dive computer time with the PC time
every time dives are downloaded.
Obviously this will only work on dive computers that have time
synchronisation support in libdivecomputer, for other computers a notice
is logged.
The selection for this option is persisted as a preference.
Signed-off-by: Michael Keller <github@ike.ch>
This tries to make our fingerprinting code work better, by avoiding
using the "deviceid" field that has always been unreliable because we've
calculated it multiple different ways, and even for the same version of
subsurface, it ends up changing in the middle (ie we calculate one value
initially, then re-calculate it when we have a proper serial number
string).
So instead, the fingerprinting code will look up and save the
fingerprint file using purely "stable" information that is available
early during the download:
- the device model name (which is a string with vendor and product name
separated by a space)
- the DC_EVENT_DEVINFO 32-bit 'serial' number (which is not necessarily
a real serial number at all, but hopefully at least a unique number
for the particular product)
but because the model name is not necessarily a good filename (think
slashes and other possibly invalid characters), we hash that model name
and use the resulting hex number in the fingerprint file name.
This way the fingerprint file is unambiguous at load and save time, and
depends purely on libdivecomputer data.
But because we also need to verify that we have the actual _dive_
associated with that fingerprint, we also need to save the final
deviceid and diveid when saving the fingerprint file, so that when we
load it again we can look up the dive and verify that we have it before
we use the fingerprint data.
To do that, the fingerprint file itself contains not just the
fingerprint data from libdivecomputer, but the last 8 bytes of the file
are the (subsurface) deviceid and the diveid of the dive that is
associated with the fingerprint.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In one weird case (suunto), the code in libdivecomputer.c
generates a device node directly instead of going the usual
way (setting the data in the dc-structure of the imported
dive). It is unclear to me whether that has to be that way,
as it depends on the chronological order of callbacks to
event_cb() and dive_cb().
Therefore add a device_table pointer to device_data_t
so that the downloader can add the device to this table. This
only adds the pointer, but does not yet use it in the
downloading code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The same structure was defined as "struct dc_user_device_t"
and typedefed as "device_data_t". Unify this. Since there
are much more of the latter, remove the former.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was only set but never read. Therefore, remove it. Divecomputer
serial numbers are now handled via a string-based interface.
We can't remove the integer-based firmware number, because that is
still used by the OSTC firmware check in ConfigureDiveComputerDialog.
Let's not risk breaking that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This finally allows us to download from not just the first device, but specifically
the device that the user picks.
Passing the object through a void pointer is not nice - but since this traverses
C code other solutions (like passing an index into the list) seemed even worse.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Implement the libdivecomputer API in Java and create C/JNI translation
layer.
[Dirk Hohndel: whitespace harmonization - yes, some of this is Java,
this still makes it much easier to read for me;
also changed the FTDI conditional compilation to make
sure we can still use that for mobile-on-desktop if
necessary]
Signed-off-by: Christof Arnosti <charno@charno.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Header files should compile regardless of order of inclusion.
Since libdivecomputer.h uses FILE unconditional include of
stdio.h is the correct thing to do.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the declarations of the "report_error()" and "set_error_cb()"
functions and the "verbose" variable to errorhelper.h.
Thus, error-reporting translation units don't have to import the
big dive.h header file.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To extend the undo system to dive sites, the importers and downloaders
must not parse directly into the global dive site table. Instead,
pass a dive_site_table argument to parse into.
For now, always pass the global dive_site_table so that this commit
should not cause any functional change.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since ff9506b21b the downloaders don't
add dives to a new trip and therefore the trip field of dc_user_device_t
became pointless. Remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since process_imported_dives() can add dives to a newly generated
trip, this need not be done in the downloading code. This makes
data flow distinctly simpler, as no trip table and no add-new-trip
flag has to be passed down to the libdivecomputer glue code.
Moreover, since now the trip creation is done at the import step
rather than the download step, the latest status of the "add to
new trip" checkbox will be considered.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since recent commits, dive-trips are not added directly to the core,
but into separate trip tables (see ec37c71f5e).
These commits did not finish the work for the download-from-dc
case.
Add an extra trip_table field to device_data_t. If trips are created
(user selected "Download into new trip"), the trip will be created
in that table.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Some divecomputer backends (ok, right now really only the Aqualung i770R
and i300C) want to know the bluetooth name of the dive computer they
connect to, because the name contains identifying information like the
serial number.
This just adds the support for that to our Qt BLE code.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is part of the whole "let's support the notion of dive computers
being exported as USB storage devices" push.
With an older libdivecomputer, we'll just fall back on failing the
operation, but we still want to support the generic notion of
DC_TRANSPORT_USBSTORAGE since we have our own internal Uemis downloader.
That one won't ever get to the open phase, since it's caught earlier.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This removes some special-case code for Uemis, replacing it with simply
passing in the device transport information.
This makes device enumeration work for the Garmin Descent (if it is
listed by libdivecomputer as a USB storage device, that is).
I don't actually do any of the libdivecomputer parsing yet, and only
have a stub for the Garmin Descent, but now the directory selection
works with that stub. The actual download obviously does not.
[Dirk Hohndel: removed obsolete FIXME from code]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This opportunistically uses a cache of 'fingerprints' for already
downloaded dives.
As we download data from a dive computer, we save the fingerprint and
dive ID of the most recent dive in a per-divecopmputer fingerprint cache
file.
The next time we download from that dive computer, we will load the
cache file for that dive computer if it exists, verify that we still
have the dive that is referenced in that cachefile, and if so use the
fingerprint to let libdivecomputer potentially stop downloading dives
early.
This doesn't much matter for most dive computers, but some (like the
Scubapro G2) are not able to download one dive at a time, and need the
fingerprint to avoid doing a full dump. That is particularly noticeable
over bluetooth, where a full dump can be very slow.
NOTE! The fingerprint cache is a separate entity from the dive log
itself. Unlike the dive log, it doesn't synchronize over the cloud, so
if you download using different clients (say, your phone and your
laptop), the fingerprint cache entries are per device.
So you may still end up downloading dives you already have, because the
fingerprint code basically only works to avoid duplicate downloads on
the same installation.
Also, note that we only have a cache of one single entry per dive
computer and downloader, so if you download dives and then don't save
the end result, the fingerprint will now point to a dive that you don't
actually have in your dive list. As a result, next time you download,
the fingerprint won't match any existing dive, and we'll resort to the
old non-optimized behavior.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This creates a new libdivecomputer_device_open() helper, and makes
downloading and configuration use it to open the dive computer device
using the proper protocol.
The IRDA case was tested by Sébastien Dugué - I had initially left it
undone believing that "nobody uses IRDA".
Reported-and-tested-by: Sébastien Dugué <sebastien.dugue.subsurface@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This converts our old custom IO model to the new model that
libdivecomputer introduced. This is partly based on Jef's rough patch
to make things build, with further work by me.
The FTDI code is temporarily disabled here, because it will need to be
integrated with the new way of opening devices.
The ble_serial code goes away entirely, since now libdivecomputer knows
about BLE transport natively, and doesn't need to have any serial
wrapper around it.
Signed-off-by: Jef Driesen <jef@libdivecomputer.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I hate changing the IO interfaces this often, but when I converted the
custom serial interface to the more generic custom IO interface, I
intentionally left the legacy serial operations alone, because I didn't
want to change something I didn't care about.
But it turns out that leaving them with the old calling convention
caused extra problems when converting the bluetooth serial code to have
the BLE GATT packet fall-back, which requires mixing two kinds of
operations.
Also, the packet_open() routine was passed a copy of the 'dc_context_t',
which makes it possible to update the 'dc_custom_io_t' field on the fly
at open time. That makes a lot of chaining operations much simpler,
since now you can chain the 'custom_io_t' at open time and then
libdivecomputer will automatically call the new routines instead of the
old ones.
That dc_context_t availability gets rid of all the
if (device && device->ops)
return device->ops->serial_xyz(..);
hackery inside the rfcomm routines - now we can just at open time do a simple
dc_context_set_custom_io(context, &ble_serial_ops);
to switch things over to the BLE version of the serial code instead.
Finally, SSRF_CUSTOM_IO v2 added an opaque "dc_user_device_t" pointer
argument to the custom_io descriptor, which gets filled in as the
custom_io is registered with the download context. Note that unlike
most opaque pointers, this one is opaque to *libdivecomputer*, and the
type is supposed to be supplied by the user.
We define the "dc_user_device_t" as our old "struct device_data_t",
making it "struct user_device_t" instead. That means that the IO
routines now get passed the device info showing what device they are
supposed to download for.
That, in turn, means that now our BLE GATT open code can take the device
type it opens for into account if it wants to. And it will want to,
since the rules for Shearwater are different from the rules for Suunto,
for example.
NOTE! Because of the interface change with libdivecomputer, this will
need a flag-day again where libdivecomputer and subsurface are updated
together. It may not be the last time, either.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of being "custom serial", it's a IO model that allows serial or
packet modes, independently of each other (ie you can have a bluetooth
device that does serial over BT rfcomm and packet-based communication
over BLE GATT with the same serial operations that describe both cases).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This removes our own declaration of dc_descriptor_t and all our accesses
to its internals, and switches to use the libdivecomputer functions to
access those instead.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
This renames and cleans up ostc_get_data_descriptor into get_descriptor,
for more generic use.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is for later reuse of that function in other source files.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a simple cp2130 userspace driver. Its probably unusable in the
real world but its a great base to build upon.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This rewrites the custom serial code to use the new api which I
implemented in the Subsurface-branch of libdivecomputer.
This is a bit to big patch but I haven't had the time to break it down
into more sensible patches.
This rewrite enables us to support more ftdi based divecomputer
communication and is tested with both a OSTC3, OSTC2N and a Suunto
Vyper, all over the libftdi driver.
The bluetooth code paths are tested to, and should work as before.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having subsurface-core as a directory name really messes with
autocomplete and is obviously redundant. Simmilarly, qt-mobile caused an
autocomplete conflict and also was inconsistent with the desktop-widget
name for the directory containing the "other" UI.
And while cleaning up the resulting change in the path name for include
files, I decided to clean up those even more to make them consistent
overall.
This could have been handled in more commits, but since this requires a
make clean before the build, it seemed more sensible to do it all in one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-04-04 22:33:58 -07:00
Renamed from subsurface-core/libdivecomputer.h (Browse further)
