When deleting dive planner points in the planner we currently sometimes
miss to hide the outdated gas name strings printed close to the profile
legs.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
This finally handles multiple cylinder pressures, both overlapping and
consecutive, and it seems to work on the nasty cases I've thrown at it.
Want to just track five different cylinders all at once, without any
pesky gas switch events? Sure, you can do that. It will show five
different gas pressures for your five cylinders, and they will go down
as you breathe down the cylinders.
I obviously don't have any real data for that case, but I do have a test
file with five actual cylinders that all have samples over the whole
course of the dive. The end result looks messy as hell, but what did
you expect?
HOWEVER.
The only way to do this sanely was
- actually make the "struct plot_info" have all the cylinder pressures
(so no "sensor index and pressure" - every cylinder has a pressure for
every plot info entry)
This obviously makes the plot_info much bigger. We used to have
MAX_CYLINDERS be a fairly generous 8, which seems sane. The planning
code made that 8 be 20. That seems questionable. But whatever.
The good news is that the plot-info should hopefully get freed, and
only be allocated one dive at a time, so the fact that it is big and
nasty shouldn't be a scaling issue, though.
- the "populate_pressure_information()" function had to be rewritten
quite a bit. The good news is that it's actually simpler now, although
I would not go so far as to really call it simple. It's still
complicated and suble, but now it explicitly just does one cylinder at
a time.
It *used* to have this insanely complicated "keep track of the pressure
ranges for every cylinder at once". I just couldn't stand that model
and keep my sanity, so it now just tracks one cylinder at a time, and
doesn't have an array of live data, instead the caller will just call
it for each cylinder.
- get rid of some of our hackier stuff, like the code that populates the
plot_info data code with the currently selected cylinder number, and
clears out any other pressures. That obviously does *not* work when you
may not have a single primary cylinder any more.
Now, the above sounds like all good things. Yeah, it mostly is.
BUT.
There's a few big downsides from the above:
- there's no sane way to do this as a series of small changes.
The change to make the plot_info take an array of cylinder pressures
rather than the sensor+pressure model really isn't amenable to "fix up
one use at a time". When you switch over to the new data structure
model, you have to switch over to the new way of populating the
pressure ranges. The two just go hand in hand.
- Some of our code *depended* on the "sensor+pressure" model. I fixed all
the ones I could sanely fix. There was one particular case that I just
couldn't sanely fix, and I didn't care enough about it to do something
insane.
So the only _known_ breakage is the "TankItem" profile widget. That's
the bar at the bottom of the profile that shows which cylinder is in
use right now. You'd think that would be trivial to fix up, and yes it
would be - I could just use the regular model of
firstcyl = explicit_first_cylinder(dive, dc)
.. then iterate over the gas change events to see the others ..
but the problem with the "TankItem" widget is that it does its own
model, and it has thrown away the dive and the dive computer
information. It just doesn't even know. It only knows what cylinders
there are, and the plot_info. And it just used to look at the sensor
number in the plot_info, and be done with that. That number no longer
exists.
- I have tested it, and I think the code is better, but hey, it's a
fairly large patch to some of the more complex code in our code base.
That "interpolate missing pressure fields" code really isn't pretty. It
may be prettier, but..
Anyway, without further ado, here's the patch. No sign-off yet, because I
do think people should look and comment. But I think the patch is fine,
and I'll fix anythign that anybody can find, *except* for that TankItem
thing that I will refuse to touch. That class is ugly. It needs to have
access to the actual dive.
Note how it actually does remove more lines than it adds, and that's
despite added comments etc. The code really is simpler, but there may be
cases in there that need more work.
Known missing pieces that don't currently take advantage of concurrent
cylinder pressure data:
- the momentary SAC rate coloring for dives will need more work
- dive merging (but we expect to generally normally not merge dive
computers, which is the main source of sensor data)
- actually taking advantage of different sensor data from different
dive computers
But most of all: Testing. Lots and lots of testing to find all the
corner cases.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a very timid start at making us actually use multiple sensors
without the magical special case for just CCR oxygen tracking.
It mainly does:
- turn the "sample->sensor" index into an array of two indexes, to
match the pressures themselves.
- get rid of dive->{oxygen_cylinder_index,diluent_cylinder_index},
since a CCR dive should now simply set the sample->sensor[] indices
correctly instead.
- in a couple of places, start actually looping over the sensors rather
than special-case the O2 case (although often the small "loops" are
just unrolled, since it's just two cases.
but in many cases we still end up only covering the zero sensor case,
because the CCR O2 sensor code coverage was fairly limited.
It's entirely possible (even likely) that this migth break some existing
case: it tries to be a fairly direct ("stupid") translation of the old
code, but unlike the preparatory patch this does actually does change
some semantics.
For example, right now the git loader code assumes that if the git save
data contains a o2pressure entry, it just hardcodes the O2 sensor index
to 1.
In fact, one issue is going to simply be that our file formats do not
have that multiple sensor format, but instead had very clearly encoded
things as being the CCR O2 pressure sensor.
But this is hopefully close to usable, and I will need feedback (and
maybe test cases) from people who have existing CCR dives with pressure
data.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There was a bug in the old code due to confusion between minutes
and seconds as the unit of the time axis. But rather than limiting
the time for the last handle in terms of the time axis (which
potentially includes long deco and allowing that for bottom time
quickly leads to dives many many hours long) limit it to 150%
of the previous bottom time.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Nothing really special here. Just a split of the only p02 max threshold into
a min threshold and max threshold, and the adaptation of the UI. Change of
translatable strings included.
ref: https://github.com/Subsurface-divelog/subsurface/issues/259
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
For CCR dives we want to display the setpoint and pO2 information,
due to the limited screensize we have to remove the temperature graph or
the view will be to cluttered.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Wfloat-conversion enabled for C++ part of the code
Fix warnings raised by the flag using lrint
Original issue reported on the mailing list:
The ascent/descent rates are sometimes not what is expected.
E.g. setting the ascent rate to 10m/min results in an actual
ascent rate of 9m/min.
This is due to truncating the ascent rate preference,
then effectively rounding up the time to reach each stop to 2s intervals.
The result being that setting the ascent rate to 10m/min
results in 20s to ascend 3m (9m/min), when it should be exactly 18s.
Reported-by: John Smith <noseygit@hotmail.com>
Reported-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
... for consistency, while we are at it.
There are still some internal depth variables which are ints
somebody might take a go at those.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Using gcc option "-Wfloat-conversion" is useful to catch
potential conversion errors (where lrint should be used).
rint returns double and still raises the same warning,
this is why this change updates all rint calls to lrint.
In few places, where input type is a float, corresponding
lrinf is used.
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
Add the tankbar to the profile and change the relative positions of the depth
and temperature curves to minimize overlap.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
It's not too clever to give 0 a special meaning (as here:
use same gas as for previous leg) when 0 is a legitimate
value.
This should solve Willem's gas disappearance problem when
reediting a dive in the planner.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When moving the last handle of a dive (in the planner, in dive add, or
when editing a dive), we rescaled the time axis whenever our idea of the
maximum duration that we should show changed. That lead to the odd
situation that you couldn't get to certain dive durations with the
visual editor (e.g. 64 minutes) because just as you approach that time
the scale changes and the dive duration jumps past the desired value.
Fixes issue #174
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We have two prefernces determining the deco_mode (BUEHLMANN vs VPMB
vs RECREATIONAL): One for the planner (deco_mode) and one for
displaying dives (display_deco_mode). The former is set in the planner
settings while the latter is set in the preferences.
This patch clears up a confusion which of the two to use by introducing
a helper function that selects the correct variable.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
We had (in the wrong place, imo) a new feature that
should differentiate the different deco_modes, you could
plan your dive in buelhman and see it in vpm-b, for instance
but both of them accessed the same pref.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Separate the VPM-B conservatism preference into diveplan.vpmb_conservatism for
planning dives and prefs.vpmb_conservatism for profile ceiling display of
saved dives.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This replaces the tissue percentage graph that probably nobody ever
understood with a heat map like the one used in the discussion
of bubble model deco. The information shown is the same but the
saturation is now in the color while the tissue determines the y
position.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Determining the correct cylinder index from a known gas mix can be
complicated, but it is trivial to look up the gasmix from the cylinder_t
structure.
It makes sense to remember which cylinder is being used. This simplifies
handling changing a cylinder's gas mix, either directly by the user, or
indirectly in the planner. It also permits tracking of multiple cylinders of
the same mix, e.g. independent twins / sidemount.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having subsurface-core as a directory name really messes with
autocomplete and is obviously redundant. Simmilarly, qt-mobile caused an
autocomplete conflict and also was inconsistent with the desktop-widget
name for the directory containing the "other" UI.
And while cleaning up the resulting change in the path name for include
files, I decided to clean up those even more to make them consistent
overall.
This could have been handled in more commits, but since this requires a
make clean before the build, it seemed more sensible to do it all in one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This caches the git ID for the dive on load, and avoids building the
dive directory and hashing it on save as long as nothing has invalidated
the git ID cache.
That should make it much faster to write back data to the git
repository, since the dive tree structure and the divecomputer blobs in
particular are the bulk of it (due to all the sample data). It's not
actually the git operations that are all that expensive, it's literally
generating the big blob with all the snprintf() calls for the data.
The git save used to be a fairly expensive with large data sets,
especially noticeable on mobile with much weaker CPU's. This should
speed things up by at least a factor of two.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Currently, the gradient factors displayed at the top of the profile are the
gradient factors set in preferences. This is correct for saved dives, but
when planning dives, the gradient factors displayed at the top of the profile
should be the gradient factors used in the plan.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is in the context of the iOS port and shouldn't impact any of the
other builds.
[Dirk Hohndel: refactored the iOS patches]
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We (ab)use fake_dc() to create a pleasing profile for a manually added
dive. Based on it's intended use, fake_dc() simply handed back a dc
structure that pointed at staticly allocated samples - that's obviously
(now that I think about it) going to blow up in my face if I edit a
manually added dive more than once.
So now we have an option for fake_dc() to actually allocate the samples -
this way the rest of the code can treat these samples as we would treat
samples created any other way. We can free them and replace them with a
new set.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were creating a couple dozen objects that we never needed and because
of that triggered several dozen callbacks whenever the model data changed.
All for UI elements of the profile that are either not used in the mobile
app (like the calculated ceiling or the partial pressure / tissue
saturation graphs), or are only useful when using the profile
interactively (which we also don't do on mobile).
I don't know if this will make a significant impact on performance, but it
seems like the right thing to do either way.
A positive side effect is that the odd blue line on top of the rendered
profile is gone as well.
Fixes#1007
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
start of the QSettinsg Object Wrapper usage on the code
this first patch removes two macros that generated around
200 lines in runtime for something like a quarter of it
Basically, whenever we changed anything we called the
PreferencesDialog::settingsChanged and connected everythign
to that signal, now each setting has it's own changed signal
and we can call it directly.
The best thing about this approach is that we don't trigger
repaints for things that are not directly profile related. (
actually we still do, but the plan is to remove them in due time)
this commit breaks correct atualization of the profile (because
everything was connected to PreferencesDialog::settingsChanged)
and now I need to hunt a bit for the correct connections
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Due to the small screen of mobile devices,
the positions of the temperature graph and the time axis needs to be shifted
upwards a bit to prevent them from overlapping with the dive computer name.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is actually not a change in the QML - it just conditionally compiles out
the code when building Subsurface-mobile.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Opening Subsurface for the first time with heartbeat graph visible
and then immediately doing File->New shows the logo/background in the
profile space while hiding everything except the heartbeat graph.
This patch makes sure that the graph is hidden with everything
else on an empty profile state.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't have a tooltip on the QML UI as it's rendered into a pixmal.
We also don't need the timer as we don't need the TTS calculations.
And we don't need the acrobatics to figure out if we're in the planner as
we don't support the visual planner (or any planner, at this point) with
the mobile UI.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now that we have the possibility to add images without meaningful
time stamps to a dive, we should let the user provide that time
offset manually. This patch allowed pictures to be dragged from
the image list to the profile.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The "Print" button in the planner dumps the QTextEdit to
a QPrinter via ::print(). This patch renders the Profile
to a Pixmap which is inserted as Base64 stream in an <img>
tag and fed on top of the QTextEdit HTML contents.
This route preserves the planner notes as text in PDF prints.
The quick alternative is to render the QTextDocument to
a QPixmap as well, but that will not preserve the text
and pagination becomes manual.
Possibly the QTextDocument can be rendered as a QPicture
but pagination is still an issue, while so far there is exactly
one user requesting this feature!
Related small change in ProfileWidget2:
Explicitly hide the tooltip when printMode is true.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes a bunch of warnings in the mobile version where these slots
are not defined (see the corresponding header's conditionals).
Signed-off-by: Sebastian Kügler <sebas@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
DiveCalculatedCeiling is the last class the references
MainWindow in the profile-widget stack.
In modelDataChanged() it looks for the information()
widget and sets a slot for the dateTimeChanged() signal that
information() emits.
To solve the issue we make DiveCalculatedCeiling recieve
a ProfileWidget2 reference and make ProfileWidget2 emit
the dateTimeChangedItems() signal.
ProfileWidget2 itself listens for the dateTimeChanged()
signal that information() emits and emits dateTimeChangedItems()
to notify any possible children/item listeners in the
ProfileWidget2::dateTimeChanged() slot.
The connection between ProfileWidget2 and information()
is set in MainWindow. This makes DiveCalculatedCeiling
unaware of MainWindow and which class originally emits
the dateTimeChanged() signal to ProfileWidget2.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
--
Think delegation.
Tomaz, please take a look at this one, to double check
if i messed up.
also i have zero idea how the mobile app is setting these
connections, if it does so even.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
