Remove "TO BE IMPLEMENTED" and add call doUpload
Connect signal to signal in QMLManager to avoid registring the
upload class.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Add enum with different export types (used to signal which type
of export QML desires).
Add QML export functions (one for file and one for upload to web)
Signed-off-by: Jan Iversen <jan@casacondor.com>
This is even easier and more obvious than copying the logs on the About page
and then manually creating an email and pasting those logs.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The way we handle singletons in QML, QML insists on allocating the
objects. This leads to a very idiosyncratic way of handling
singletons: The global instance pointer is set in the constructor.
Unify all these by implementing a "SillySingleton" template. All
of the weird singleton-classes can derive from this template and
don't have to bother with reimplementing the instance() function
with all the safety-checks, etc.
This serves firstly as documentation but also improves debugging
as we will now see wanted and unwanted creation and destruction
of these weird singletons.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This addresses the following warning when running the mobile app:
INFO: QQmlExpression: Expression qrc:/qml/DownloadFromDiveComputer.qml:339:5 depends on non-NOTIFYable properties:
INFO: QMLManager::DC_forceDownload
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of creating a pointer-to-DiveObjectHelper in commitChanges,
use a normal object. Thus, we don't have to think about ownership
issues with respect to this object.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This should do the right thing in the various situations of correct &
verified credentials, credentials needing PIN verification, invalid
email/password combination, incorrect PIN, correct PIN.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Always keep the dive site model up to date when adding dive sites.
This hopefully avoids creation of invalid indexes followed by crashes.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The LocationInformationModel used to sort its entries and was completely
rebuilt after every change. This makes it rather complex to support
incremental changes.
Instead, keep LocationInformationModel sorted by UUID so that indexes
are consistent with indices in the core dive site table.
Implement sorting by other columns than name and enable sorting in the
dive site view.
Finally, don't cache the list of dive site names for the mobile app,
since that would also need some rather convoluted methods of keeping
the list up to date. Calculate it on the fly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
And offer an option to show all devices in the settings. This is intentionally
not stored in the preferences as this should never be needed. We don't support
BT or BLE dive computers that we don't recognize. This is a last resort in case
a new firmware were to change the name or some other weird issue causes us not
to recognize a dive computer - and that should be fixed instead of worked
around.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since process_imported_dives() can add dives to a newly generated
trip, this need not be done in the downloading code. This makes
data flow distinctly simpler, as no trip table and no add-new-trip
flag has to be passed down to the libdivecomputer glue code.
Moreover, since now the trip creation is done at the import step
rather than the download step, the latest status of the "add to
new trip" checkbox will be considered.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For some devices the BT device name is different from the product name.
Make sure that name is available to the mobile UI. This helper fills it
in from the scan data (based on the device address).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Naturally the paste button should be disabled, if this is the case, but
it still makes sense to do this check.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Initial implementation/prototype of copy-paste support for
Subsurface-mobile. The UI part is really lacking; right now the copy
button is initially visible and paste is achieved by long press on a
dive and clicking the paste button when it appears. Delete is currently
not possible at all, as I just failed to layout the buttons properly
using QML. It just sounds so simple, to put all the copy-paste-delete
buttons next to each other...
The data to be copied is currently hard-coded. A dialog to choose
inteded fields would be nice, but it'll take quite a bit effort to get
used to QML enough to be able to hack something together.
Anyway, this seems to work, even though the UI is not always reflecting
the paste without switching dives (when testing on laptop).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
After the previous commits, we now have a preference that nicely
preserves the state of the UI, and we have the well known git_local_only
global, that is used to denote whether we want to use to local repo
only, or we want to interact with the online cloud as well.
This commit gets rid of the now superfluous syncToCloud logic. Instead
we simply set the git_local_only directly.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
We only store the address part of the connection name, so don't try to find an
exact match, try to find the sub-string.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use qPrefLocationService::set_time_threshold and remove from
qmlprefs.cpp and qmlmanager.cpp
Remark: mobile UI shows time in minutes, while it is stored (and calculated)
in seconds. Therefore a /60 when reading and *60 when setting.
Signed-off-by: Jan Iversen <jani@apache.org>
Despite the fast that this code is sitting in core, its used mainly
from mobile. In 987e221f8e, the buttons to interact with the GPS
webservice were deleted from the UI. Now, delete all the code that
was used under these buttons.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
With the new setup we need to know which state we are coming from
when we are saving cylinder related info. When we are adding
a new dive we explicitly should save cylinder data to the first cylinder.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Same as for cylinder info, we need to make sure that the gasmixes gets saved to the correct cylinder.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Save the edited cylinder in the correct slot.
Since the cylinder number and the used cylinder number need not be
the same we first need to test if the cylinder are used.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
And try to guess which one from the device string we get from the Intent.
The function is named to indicate its future use (because once the user
plugs in such a device, we should show the download page).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user plugs in a device on Android we get a device string that
should allow us to figure out which dive computer was plugged in. Make
that string available to the QML UI.
Right now all we do is log it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
add settings variables/functions to qmlprefs
remove settings variables/functions from qmlmanager
change manager. to prefs. in qml files for setting variables/functions
Signed-off-by: Jan Iversen <jani@apache.org>
helpers.h included qthelper.h and all functions declared in helpers.h
were defined in qthelper.h. Therefore fold the former into the latter,
since the split seems completely arbitrary.
While doing so, change the return-type of get_dc_nichname from
"const QString" to "QString".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The reply member variable was used to access the reply in the
handleSslErrors, handleError and retrieveUserid slots. This is a
very scary proposition in the light of multi-threading. Instead,
the reply can be accessed by using the QObject::sender() function.
Thus, we can remove the member variable.
The request member was just downright weird. This was only used
locally to describe a network request. Since QNetworkAccessManager::get()
copies the request, it can be destructed right away. Nevertheless,
the data was kept as a subobject. Remove member and make it function-local.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Users need a simple way to report download problems. Asking them
to go into settings, activate logging, and repeat the download
is too much.
libdivecomputer.log will always be generated, but overwritten, with every
download, so the latest log is ready.
The download is very slow due to BT, so there are no impact of having the log
active, neither in terms of size (a concern on small mobiles) or write time.
Signed-off-by: Jan Iversen <jani@apache.org>
on iOS it is practically impossible to copy the App log
to e.g. a mail! in iOS 11 the log file is stored within
the subsurface container and you first need to copy (actually
using the clipboard) out from there to the "normal" document
shared space, before it can be used.
At least iOS users (and I believe Android users) are not really
used to work with files, so the process is not easy to document
in an understandable way.
The alternative is to provide a button, which simply puts the
log on the general clipboard, allowing it to be pasted in a
multitud of applications.
Signed-off-by: Jan Iversen <jani@apache.org>
So far we only wrote messages to subsurface.log on Android (since we couldn't
figure out how to make that file user accessible on iOS). Now that that's
fixed, we also need to actually write to the file in the first place.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
registerError() may be called from a different thread context. Passing
the message as a const-reference may lead to a dangling reference.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As we need to update our new stringlist models on multiple
locations, just refactor them into a new function.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
See also e6e1473e6. The construction of the locationlist
was not the same as the 3 previous lists, and it needs
the inclusion of a new model file (divelocationmodel.cpp)
in the mobile app. In addition, as the mobile app is mainly
interested in a simple stringList (model) to populate a HintsText
field (or maybe later a combobox), this stringlist is added
to the model, to easy interfacing with QML.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
See e6e1473e6. Exact same commit but here for the
list of divemaster. The careful reader will spot a
small addition to the clearDetailsEdit() QML function.
Two more field are cleared.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is the first of a set of commits that are (very) similar.
It appeared that a number of more or less static lists, which are
constructed by a loop over all dives in the logbook, were executed
when changing focus to a next dive. For example, the in this
commit addressed list of used dive suits.
What was wrong was that the suitList was linked to a dive. There
is only a need to construct the list of used suits when data is
changed (and obviously, once on startup of the app). Further, it
appeared that a lot of code was duplicated and that we can use
(in this case) the same code from the desktop completionmodels.cpp.
Basically, this commit involves the following changes:
- include completionmodels.cpp in mobile and desktop (so move
it from the desktop only category to the generic category).
- remove double code from DiveObjectHelper.cpp
- Do not differentiate in the init phase and the normal refresh
of the list
- the per dive logic is now only the getting of a previously
constructed list (in init or update of the divelist).
There are no visible changes in the UI, other than a better
performance when scrolling over dive details.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Instead of manually logging errors after each potentially
error-producing function, use the error-callback. The error texts
are accumulated in the QMLManager object for further use.
The text is transported to the QMLManager object via a queued
connection. Thus, errors can be reported from other threads
without having to deal with manual locking.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
QMLManager::tryRetrieveDataFromBackend() was a one-liner calling
void QMLManager::checkCredentialsAndExecute() with a pointer-to-member.
The latter was never called with a different pointer, therefore
fold the latter into the former and remove the indirection.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
QMLManager was full of redundant getter functions of the type
bool QMLManager::locationServiceAvailable() const
{
return m_locationServiceAvailable;
}
These can be removed changing READ keywords to MEMBER keywords
in the QPROPERTY declarations.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Otherwise the divecomputer has to be in pairing mode
at app start time.
Unfortunately, this leaves less space for the progress message.
My time/qml knowledge does not suffice to move that to the next line
(when moving that out of the RowLayout it overlaps with
the buttons).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When the user entered a dive site using autocompletion, it
is a known site, of which we might have a GPS location already.
Just fill the known site coordinates.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Before this change, there was only one way to create the local
no cloud repo on the device. The user needed to add at least
one dive to the no cloud account (so that there is something
to save). While this worked in some scenarios, it could also
get things in an inconsistent state: credential status = CS_NOCLOUD
but no local repo. This was a dead end.
In this commit, the creation of the no cloud repo is made more
explicit. When asking for no cloud mode, just create an (empty)
repo for it when it does not yet exist, and otherwise, just
open the existing (possibly empty) repo.
Now, a user can have no cloud repo, next to (any number of)
cloud accounts.
This leaves one functional aspect left: how does a user abandon
the no cloud repo, by merging his data into a true cloud
account. This is code for this, that tries to do this merge in
a smart way. This seems to be broken (too). To be clear: this
is no part of this commit.
Fixes: #667
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This commit implements possible switching BT on and off during a session,
so not needing a restart of the app when the user forgot to switch
it on when starting the app.
For this, the following needed to be done: 1) create a handler that
reacts on local BT device status changes. 2) repopulate the connection
list in the download screen when a BT status change is detected.
Notice the subtile change of the Q_INVOKABLE btEnabled() function
to a Q_PROPERTY. This gives a nice dynamic behaviour when
switching BT on/off with the app open.
Fixes: #556
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
As written in 8d9ad3cfea7e4c0875, the user needs to be able
to exit the PIN entry UI, in case no PIN can be received due
to a wrong email address.
The simplest way seems to just clear the cloud credential data,
and let the user try again. Obviously, we could argue if the
exact previous state of the 1st credentials screen could
be restored, but as it is only 2 simple fields, of which
it is higly likely that the email adress is misspelled (and
the password hidden), it seems overly complex to implement.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Having two different enums around with more or less the same
definition has lead to unclear code. After removing two not needed
states on the mobile end, the remaining step to one enum for the
credential state becomes almost is simple rename operation.
Unfortunately, I do not know a way to embed a plain C enum
from pref.h into the QMLManager object. So after this, there
are still 2 enums around, but now identical.
This commit is not changing any functionality.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
And here, the removal of a second superfluous state from QMLManager.
This is true no-brainer. While this state was set once troughout the
entire mobile code, it was never tested for this state. Testing shows
that it is safe to change to the UNKNOWN state.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is a no-brainer removal of the VALID_EMAIL state used in QMLManager.
All current usage of this state is "if state is VALID or VALID_EMAIL",
so there is no distinction between the two states.
It is even a little different. The comment suggests "when we can open
a local cloud storage, tied to a cloud account (so explicitly not
the no-cloud status), we have at least a valid email". While this
is formally true, this implies that there is also a cloud account
on the cloud server (ie. the cloud account is in a VERIFIED state).
In other words: currently, there can't exist a valid local storage
that is tied to a valid email adress, without valid cloud account
on the server.
Notice that this touches the discussion on GitHub for commit
e76f527fe5 (pull request #520). Can we implement the creation
of a valid cloud account without data link to the cloud server?
Currently, we need the server to confirm the email address (for
example for uniqueness reasons on server side). Obviously, we could
hack our way out of this, but we have a perfect solution already
in place. Create a no-cloud account, and transfer that later to
a true and valid cloud account.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Add a checkbox to the preferences page to facilitate selective visibility of the developer menu. With the coresponding function in qmlmanager.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
This commit adds the capability to cancel a running download from DC.
The actual cancel is fully handled in the underlying libdivecomputer
code. As the user may be interested in the dives downloaded up to
the moment of cancel, do not just close the download screen (as
it was before this commit). Now, the <quit> button changes to
<cancel> when the download is started, and pressing cancel, only
cancels the download and does not close the download screen, but
presents the so far downloaded data. When no download is running,
the <quit> button just quits the screen as before.
Fixes: #485
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The trick is to pick a path that is accessible from other applications.
In theory QStandardPaths::GenericDataLocation should provide that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To be shared between C/C++ and QML code in order to show the updates
and potential error messages from libdivecomputer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code is based on code from Marco Martin from the Kirigami Android
sample app. In order to simplify the QML code the QMLManager function is
there for all OSs, but it's a no-op on anything but Android.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old system of cloud access updates with fake percentages just wasn't
helpful. Even worse, it hid a lot important information from the user.
This should be more useful (but it will require that we localize the
messages sent from the git progress notifications and make them more
'user ready').
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For reasons unknown to me, the DCDeviceData instance was freed way too early,
and used afterwards, obviously resulting in a SIGSEGV. This commit creates
the DCDeviceData as a direct child of the QMLManager instance, ensuring
it does not get freed prematurely.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This shouldn't be part of the UI (qmlmanager), but part of our
overall handling of dive computers and BT devices.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a list of paired BT devices to the QMLManager class. In addition,
a very simple implementation is made of getting the paired BT devices on
Linux, so that we can test further processing of selecting the proper
devices, in a mobile-on-desktop situation.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
As Qt is not able to pull the pairing data from a device, a lengthy
discovery process is needed to see what devices are paired. On
https://forum.qt.io/topic/46075/solved-bluetooth-list-paired-devices
user s.frings74 does, however, present a solution to this using JNI.
Currently, this code is taken "as is".
Currently, only for Android (so not mobile-on-desktop, or even desktop).
And only generating logging data in the logcat.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
If we find something that looks like a known BT dive computer, set
things up so that we can use it later. If multiple dive computers are
found, simply use the first.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far all this does is list all the BT devices that it finds
(and I worry if this will have negative battery implications
on a mobile device), but this should allow us to connect to
a standard BT dive computer (but that will of course require
more code to pick the right device).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We already have that for the other three fields where we offer auto
completion (buddy, divemaster, suit).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to make sure we don't render the initial profiles with the
wrong scale on devices, we need to seed the device pixel ratio with the
device default and then update it once the window has been created.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the option to select a cylinder when adding or editing a dive.
Due to limited screen size we restrict the editing to the first cylinder only.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to get autocomplete to work on manual dive add
we apparently need a separate init function.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With offline the default now, we need to force a connection at least once
so that the repos are in sync. And then of course we need to return to the
correct state, regardless on whether this connection succeeded or failed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is rather simplistic, it just imports the local data into the remote
repository and therefore loses the git history of the local data - but I
wasn't able to make the git merge without shared base commit work, so I
went this much easier to implement route instead.
One thing we need to be careful about is that contacting the remote server
could fail. If we don't manage to merge the dives from cloud server and
local storage, we need to revery to no cloud status in order not to lose
the local data.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This exposes a locationServiceAvailable property to QML and keeps it in
sync with the corresponding state in the GpsLocation widget.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I couldn't figure out how to break this down into small, useful commits.
Part of the problem is that I kept going while working on this and as you
can see from looking at the commit, diff tries so hard to find small code
fragments that moved around, that the diff overall becomes quite
unreadable and it seemed impossible to recreate the sequence of steps
after the fact.
It all started with adding the parsing for the GPS coordinates. But while
testing that code I found several issues with the rest of the function.
Most importantly it seemed ridiculous that we carefully tried to match the
texts that the DiveObjectHelper would create for the various fields,
instead of just using the DiveObjectHelper to do just that. And once I had
converted that I once again realized just how long and hard to understand
that function was getting and decided to break out some of the more
complex parts into their own helper functions.
But of course all this didn't happen in this logical, structured, ordered
way. Instead I did all of these things at the same time, testing,
rearranging, etc.
So in the end I went with one BIG commit that does all of this in one fell
swoop.
This adds four helper functions to deal with start time/date, duration,
location and gps coordinates, and depth of the dive.
To avoid mistakes when dealing with the GPS coordinates, there's another
helper to encapsulate the creation of the dive site and we switched to a
current GPS location.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The manager can now directly update the index of the selected dive, and
the UI tells the manager the timestamp of the currently selected dive.
This allows the manager to pick the best possible dive as selected dive
if things change (for example if the dive list gets reloaded because it
changed in cloud storage).
Fixes#1009
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
