Pass the dive to be planned to track_ascent_gas and don't use
the displayed_dive. For convenience, pass the cylinder-id, since
the function can now access the cylinder of the dive by itself.
This makes the callers less verbose.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The function comment talks about overwriting displayed_dive, when
in reality the function overwrites a passed in dive.
Also fix a debug-call which dumped the displayed_dive, not the
actual dive to stdout.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The fill_default_cylinder() function calculated the MOD based
on the currently displayed dive. This does not seem to make sense:
- When importing dives, why would we care about the altitude and
salinity of the currently displayed dive, possibly from a different
trip.
- The planner is supposed to be thread-safe and should not touch
global variables.
Of course this means that the importing-functions have to fill
out altitude and salinity before creating the default cylinder,
but this is their problem. For a freshly created dive they will
get the default values, which still seems less random than the
values from the displayed dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of passing the global displayed_dive to
calc_crushing_pressure(), use the dive the planner is working on.
A small step in making the planner thread-safe.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The parser had global state in the form of a linear regression
and the "plot_depth" variable. Collect that in the deco_state struct and
pass it down the call-chain. Move out the code to update the
regression data to not bother other callers of tissue_tolerance_calc().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
A number of architecture-dependent functions were declared in
dive.h. Move them to file.h so that not all file-manipulating
translation units have to include dive.h. This is a small step
in avoiding mass-recompilation on every change to dive.h
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the declarations of the "report_error()" and "set_error_cb()"
functions and the "verbose" variable to errorhelper.h.
Thus, error-reporting translation units don't have to import the
big dive.h header file.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace a macro calculating a degree-three polynomial by an
inline function.
Moreover, calculate the powers 1, 2 and 3 of the pressure inside
the function. The compiler will be smart enough to optimize this
to the same code. The only important thing is to write "x*x*x*coeff"
instead of "coeff*x*x*x". The compiler can't optimize the latter
because ... wonderful floating point semantics.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The relevant text in the present manual is obsolete. Update
the text dealing with dive profiles from several sive computers
for one specific dive. One image is added.
Deal with creating a new cylinder type.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
On the main tab, the trip time was not shown when switching to
a trip. Implement showing of the trip date in a function, as the
undo-code will also have to update the trip date in certain
circumstances.
Fixes#2207
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The planner can produce negative cylinder pressures when
more gas is used than available. Let's color the pressure
graph in a highly visible color to alert the user of the
fact that current gas planning is insufficient.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
DiveCartesianAxis::valueAt() is supposed to be the inverse of
posAtValue(). This fixes the math such that inverted
orientations are correctly taken care of.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The curve fitting for our gas compressibility was only done in the sane
range of 0-500 bar, which is what a scuba cylinder can reasonably be
expected to perhaps have.
But the planner ends up happily using negative cylinder pressures when
you run out of gas, and then the compressibility gives nonsensical
results.
That's clearly a planner bug, but the nonsensical gas compressibility
values made it harder to see what could be wrong.
So we just clamp the inpot range to the range we have verified against
experimental data. If you try to get compressibility for negative
pressures, you get the compressibility for an ideal and imaginary gas.
And if you try to get compressibility for pressures over 500 bar, we'll
just assume that it's 500 bar.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For better encapsulation, use clear_git_id() in clear_dive_file_data()
instead of setting saved_git_id directly.
Thus, memory management of the saved_git_id value is encapsulated
and can be modified more easily.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The git parser was using a number of global static variables. Remove
them by introducing a parser state, which is passed down to the
call hierarchy.
Advantages:
1) Removes global variables and makes the parser (mostly) reentrant.
2) More flexible - e.g. when parsing samples, the parser can now
access the dive to check if the cylinder number is valid.
3) Less weak typing through "void *".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The function get_divemode() and git_tree_entry_blob() were not used
outside of load-git.c. Make them of static linkage.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As Berthold points out, a failure to match the site or location index
will result in an infinite loop with previous patch.
With this one the loop will end after reading the last table row even if
no idx is matched. But ... If we asume this situation is possible the
retrieved data would be wrong, and ending the function without filling
the site structure is mandatory too.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
We were assuming these tables were sorted with their indexes, but it
happens to be false, under some circustances at least.
Reported-by: Andreas Hagberg <scubasoft@gmail.com>
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
This button only closes the filter panel but doesn't clear it.
Reported-by: Adric Norris <landstander668@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit 0c38754916 introduced a
bug in MapLocationModel::reload() by setting an entry in the
name-to-location map before the location was initialized.
Move the setting of the map entry back where it was before:
after the assignment of the location variable.
Moreover, define the location variable directly on allocation
of the location to avoid thus bugs in the future.
Why did we not get a "might be used unitialized" warning
anyway?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
copy_cylinders() copied the cylinders of one dive onto another dive
and then reset to the original gas values. Presumably, when copy and
pasting cylinders from one dive to another, only the types should
be copied, not the gases.
Moreover, the function could either copy all or only the used cylinders.
Firstly, the code was bogus: when restoring the pressures the indices
were mixed up: the old indices were used. Thus, when there where
uncopied cylinders, not all pressure values were restored.
Secondly, it is not clear that all callers actually want to restore
the pressure data. It rather appears the two (out of three) callers
actually just want to copy the cylinders.
Therefore, split the function in
1) copy_cylinders(): copy the cylinders with pressure data
2) copy_cylinder_types(): copy only the cylinder information
Since there is only one caller of copy_cylinder_types(), the "used_only"
argument can be removed. Since all cylinders are copied there is
no point in storing the pressure data. Don't overwrite it in
the first place.
The resulting two functions should be distinctly easier to understand.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The weightsystem_equal() function compares weightsystems of two dives
to decide whether the "commit changes" message should be shown and
to decide which dives are edited when changing multiple dives.
Due to an index mixup the function returned wrong results for
more than two weightsystems. Fix it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The parsers / downloaders parse into a separate table and do
not directly change the divelist. Therefore, they shouldn't
call mark_divelist_changed().
Likewise split_dive_at() doesn't modify the dive list and
therefore shouldn't call this function.
Calling the function has the unwanted side-effect that undoing
the change will not clear the *-symbol in the title of the
main window.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When pressing F2 in the dive list, the number can be edited.
Make this action undoable by implementing a EditNumber command.
This command is differs from the other undo commands, as not the
currently selected dives are changed. This means that the EditCommand
needs an alternative constructor taking a single dive. This constructor
was implemented in the base class so that all edit commands can now
be called with a single dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Simply move that export to the top of the file with the others.
Suggested-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With all upgrading, the build apks now show up in a slightly different
location. Correct this in the scripting. Notice that this is debug
building only. Release building is outside the repo.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Trivial. The final touch command was missing the proper quotes, so it
created a bunch of strangely names files from the date command. Just
good for the developers that like to peek into the docker image.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is squashed commit consisting of a number of subjects, all intended
to get our app to build, link and run on device, but as the steps are
small (but non-trivial), I document them in this one commit.
1) Do not use OpenSSLs install targets, but simply copy the wanted build
artifacts manually. The main reason for this, is that the install
targets want to install a lot more than we build, so it also builds
parts of the OpenSSL suite that we will never use.
2) As Android does not like shared libraries with embedded versioning
(and the used androiddeployqt actively prevents adding versioned
libraries to the build), strip all this data from the generated shared
libraries. This trick was already there, but its adapted to all possible
conflicts.
3) The OpenSSL config script seems rather broken, resulted in failed
builds, and calling the underlying Configure is simpler.
4) Finally, parts of the OpenSSL code uses stdio things like stdout,
stderr, etc. These showed up as undeclared external on build time. Well,
luckily, there was an easy way out using 2 -D(efines). This feels hacky,
but does the job (and we are not interested in the output of OpenSSL in
our app).
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The main reason for upgrading of the Qt version is the hunt for a broken
BT/BLE stack, preventing downloads from BT/BLE enabled DCs, in relation
to arm64 architecture builds. (And the absolute need for an arm64 build
in relation to the publication of the Android app in Googles Play
store).
In addition, Qt 5.12.4 starts supporting OpenSSL 1.1.1c, and trying to
use our current OpenSSL 1.0 series is highly discouraged by Qt (and
OpenSSL itself).
So, upgrade both in unison. But ... be careful bisecting issues on this
commit, as it does break our build. That will be fixed in the next
commit.
This fixes the BT/BLE download for arm64!
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Using more recent versions of the Android NDK results in a build failure
saying something like "No toolchains found in the NDK toolchains folder
for ABI with prefix: mips64el-linux-android". Mips support went away
after Android NDK, Revision r17c, and we are using r18b at this moment.
Too old Gradle stuff gets confused by this.
The solution is simple. Use a newer version of the Gradle plugin.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This function was used to count the number of weightsystems
used in a dive. Since the weightsysems are now collected
in a dynamic table it became unused. Remove.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace the fixed-size weightsystem table by a dynamically
relocated table. Reuse the table-macros used in other parts
of the code.
The table stores weightsystem entries, not pointers to
weightsystems. Thus, ownership of the description string is
taken when adding a weightsystem. An extra function adds
a cloned weightsystem at the end of the table.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This will be used later when joining and editing dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Sadly, this doesn't give any type safety. But at least it documents
the function arguments.
Make the last item in the enum as a number-of-pressure-entries
sentinel. Use that to size the pressure-values array.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of assigning the the lvalue of the SENSOR_PRESSURE
macro, introduce a general function to set pressure values.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
