In commit bcdd6192fe ("Show translated event names in tooltip") I was
too aggressive in replacing the checking for event names with checking for
event types. It turns out that we are abusing an existing event type in
the planner (and use a different event name to mark the difference). By
just checking for the type this now caused incorrect information to be
displayed in the info box (a simply "PO2 warning" on a Suunto D9 could
turn into a "Bailing out to OC" notice).
The correct fix is to get our own range of SAMPLE_EVENT_xxx numbers from
libdivecomputer. Once we have those, we can do this the right way. For now
we just fall back to also checking the event name (which is what I wanted
to get away from so translated names don't trip us up).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order for this to work we need to compare against the event type
instead of the event name - which makes much more sense to do, anyway.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Rewrite of the actual planner logic. Now ascend to the next potential stop
depth. There the state is cached and we try to ascend to the next stop
depth. If we hit the ceiling while doing that we go back to the cached
state and wait there for a minute. Then we try again. Then loop.
Converted all depth related variables from unsigned int to int. During
planning, in a time step the current depth can temporarily be negative and
comparisons of a negative int with an unsigned it have not the result I
expected ( (int) -2 < (unsigned int) 3 turns out to be false). And we
don’t really need the 32nd bit that unsigned buys us for depths.
Deco stops are now shown in the same table as manually entered stops in
boldface (I removed the second table to save screen estate).
The gas shown in the table is still misleading as it means the gas used on
the segment leading up to that event.
The update of the profile only works partially upon changes in the list of
available gases.
Treatment of various gases is basically there but needs some more love.
The ascent velocity is now provided by a function that takes the current
depth as argument. Currently it always returns 10m/min but that will later
be variable (and hopefully user configurable).
The profile is not redrawn while deco is computed (avoiding an infinite
recursion).
The table got a new column for the duration of a segment while the old
“duration” column was renamed “Runtime” to reflect what it actually shows.
Currently, only the run time but not the duration are editable.
All deco gases are used from the depth where their pO2 is 1.4bar. This
should become more flexible.
Calculation of the pressure drop in cylinders without configured volumes
is suppressed. This solves a problem with the planner crashing when saving
a dive where not all cylinders had been manually given a volume.
[Short rant break: Treating 0/0 as air bites back at so many places. E.g.
Cylinder data is initialized with memsetting the whole structures to 0.
Then later suddenly this totally unconfigured cylinder is being treated as
it would contain air. Maybe at some point this was a feature. But it lead
to a naughty bug which took me over an hour to resolve. We should
seriously reconsider this choice and better move to 209/0 being air if
changing this everywhere is not too much trouble]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used to fall back to an AL80 default cylinder, but that meant that a
user who doesn't want a default cylinder at all had no way to indicate
that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The "report_error()" interface is a lot simpler, although some of the
C++ code uses QStrings which make them a bit annoying, especially for
the varargs model. Still, even with the explicit conversion to UTF8 and
"char *", the report_error() model is much nicer.
This also just makes refreshDisplay() do the error reporting in the UI
automatically, so a number of error paths don't even have to worry. And
the multi-line model of error reporting means that it all automatically
does the right thing, and reports errors for each file rather than just
for the last file that failed to open.
So this removes closer to a hundred lines of cruft, while being a
simpler interface and doing better error reporting.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This shouldn't happen, but in case we run out of gases we shouldn't use
the negative gas index (which is the error return of get_gas_idx()) for
the array. Let's fall back to the (incorrect) first gas.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I know everyone will hate it.
Go ahead. Complain. Call me names.
At least now things are consistent and reproducible.
If you want changes, have your complaint come with a patch to
scripts/whitespace.pl so that we can automate it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Earlier we converted the C++ code to using true/false, and this converts
the C code to using the same style.
We already depended on stdbool.h in subsurfacestartup.[ch], and we build
with -std=gnu99 so nobody could build subsurface without a c99 compiler.
[Dirk Hohndel: small change suggested by Thiago Macieira: don't include
stdbool.h for C++]
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
More to get clang-scan to quiet down that for the unlikely event that
unsigned int and int is different sizes.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some code in plan() left from the gtk days introduced a safety stop in the
plan. It created a un-editable diveplanpoint.
Fixes#349
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code would have leaved gasidx undefined if it doesn't find a correct
gas, so this asserts instead of using uninitialized variables as array
index.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The previous code checked against the current depth to find the next
deco stop, not the ceiling we actually should head for.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this every cylinder downloaded from a divecomputer that doesn't
provide cylinder data, and every cylinder manually added anywhere will
default to the default cylinder that is set in the preferences.
For people who most of the time dive with the same equipment (always on
dive boats with AL80, or almost always diving their personal HP119) this
should be a nice improvement.
If you don't like this behavior, simply leave the default cylinder setting
in the preferences empty.
This commit also fixes the incorrect s->value call (should be
s->setValue). I wonder what this did to the default filename before...
Fixes#145
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The *-clang* selector doesn't appear to work correctly in my build environment
(or I just don't understand how it is supposed to work). Either way, making
this conditional on !mac works.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There is a add_gas_switch_event, so don't duplicate the code.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows to add missing gas change events to the currently shown dive
computer. Only gases defined in the Equipment section are offered.
Fixes: #250
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- get_gas_from_events does NOT always set o2/he. It only updates them IFF
a matching event is found; so we need to make sure we start out with a
valid gas mix
- the way we tried to restore the edited dive in case of an edit to a
manually added that is cancelled was completely bogus. Way too complex
when we can simply and reliably simply store the dive and then copy it
back
Fixes#270
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Right now hardcoded to AL80. This way in the future we'll have a volume of
gas that's available. And this makes much more sense then a random string
in the description field.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This partially reverts changes in commit 1b655d5c806b ("Correctly track
gases when manually adding and then editing dives") as it turns out this
did NOT help us correctly track gases (which is ironic, given the title of
that commit). I didn't actually want to revert that commit as
infrastructure has changed since then and this made the patches look even
more incomprehensible.
So we are back to tracking the "gas on which we arrive at this spot" in
each dive plan node as this makes the rest of our planning so much easier
- I had forgotten about the reasons why we did things this way when I made
the above mentioned commit.
Instead we now make sure that our available tanks are added the correct
way, that such entries are ignored when planning and when drawing the
editable profile, and that at the end it all gets assembled correctly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a corner case in the planner that was exposed by the recent
changes to the way the dive plan reflects the gases during the dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code had quite a few odd special cases that may have been left-overs
from the old Gtk algorithm. With this the gas is actually in the dive plan
node where it's use starts. And we maintain the gas correctly between
multiple edit sessions.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the model name is written into the XML file it has to be a literal
string that isn't translated. Otherwise a datafile written in one locale
behaves differently when opened by Subsurface under a different locale.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This gets rid of compiler warnings "format not a string literal and no
format arguments [-Wformat-security]". E.g. when building distribution
packages these warnings are often treated as errors preventing the
build (with good reason).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
This may seem like a really odd change - but with this change the Qt tools
can correctly parse the C files (and qt-gui.cpp) and get the context for
the translatable strings right.
It's not super-pretty (I'll admit that _("string literal") is much easier
on the eye than translate("gettextFromC", "string literal") ) but I think
this will be the price of success.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I always worry if these are worth following up on - but these seem pretty
clear and obvious to me. As far as the planner is concerned, depth is
unsigned.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- remove the build flags and libraries from the Makefile / Configure.mk
- remove the glib types (gboolean, gchar, gint64, gint)
- comment out / hack around gettext
- replace the glib file helper functions
- replace g_ascii_strtod
- replace g_build_filename
- use environment variables instead of g_get_home_dir() & g_get_user_name()
- comment out GPS string parsing (uses glib utf8 macros)
This needs massive cleanup, but it's a snapshot of what I have right now, in
case people want to look at it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simply trying to role-model safe behavior I guess. Fundamentally all this
should be configurable (so I added comments about that on the planner side
as well).
One of the interseting side effects of this implementation is that if the
user removes the safety stop and comes up directly from a deeper depth,
the slope of the ascent will change at 5m :-)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In add dive mode simply bring the diver safely back to the surface
(currently with a fixed ascent rate of 30ft/min (or 9m/min)).
We should make that rate configurable (for the planner as well as the dive
add function). Also, the dive add function should offer to automatically
include a safety stop.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The gas choice now works and correctly ( I hope ) calculates
the gas choosen to show on the planner. User can choose the
gas from the list on the visual planner, and also on the table.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Remove circle in plan by starting the first line at the first point
rather than the last.
In addition marks all entered points as entered and not just the first and
sets line color accordingly.
Makes plan_add_segment return the added data point.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This uses a bunch of default values that we eventually need to get from
the UI, but it's a first step towards a working dive planner.
This exhibits some graphical artifacts when running, but other than that
appears to be mostly correct.
Things go far worse if I enable the changing of the scale once the deco
makes the dive longer than the displayed time window. Things quickly
spiral out of control.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I expanded the DiveHandler to include the actual time / depth of each
node on the graph - this way things will stay consistent if we need to
rescale the graph.
One thing that this makes obvious is that the whole design for the
planner so far assumes metric data. We need to make sure this works well
with feet instead of meters as well (and that it uses the information in
the units settings).
With this change we actually create a dive based on the plan input and
add the deco stops (if needed) to it - but we don't do anything with the
results of those calculations, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After the 3.1 release it is time to shift the focus on the Qt effort - and
the best way to do this is to merge the changes in the Qt branch into
master.
Linus was extremely nice and did a merge for me. I decided to do my own
merge instead (which by accident actually based on a different version of
the Qt branch) and then used his merge to double check what I was doing.
I resolved a few things differently but overall what we did was very much
the same (and I say this with pride since Linus is a professional git
merger)
Here's his merge commit message:
This is a rough and tumble merge of the Qt branch into 'master',
trying to sort out the conflicts as best as I could.
There were two major kinds of conflicts:
- the Makefile changes, in particular the split of the single
Makefile into Rules.mk and Configure.mk, along with the obvious Qt
build changes themselves.
Those changes conflicted with some of the updates done in mainline
wrt "release" targets and some helper macros ($(NAME) etc).
Resolved by largely taking the Qt branch versions, and then editing
in the most obvious parts of the Makefile updates from mainline.
NOTE! The script/get_version shell script was made to just fail
silently on not finding a git repository, which avoided having to
take some particularly ugly Makefile changes.
- Various random updates in mainline to support things like dive tags.
The conflicts were mainly to the gtk GUI parts, which obviously
looked different afterwards. I fixed things up to look like the
newer code, but since the gtk files themselves are actually dead in
the Qt branch, this is largely irrelevant.
NOTE! This does *NOT* introduce the equivalent Qt functionality.
The fields are there in the code now, but there's no Qt UI for the
whole dive tag stuff etc.
This seems to compile for me (although I have to force
"QMAKE=qmake-qt4" on f19), and results in a Linux binary that seems to
work, but it is otherwise largely untested.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When diving in areas where there are risk of boats passing above you,
its common practise to do the last stop at 6m to better stay out of
harms way. When doing o2-deco, it doesn't matter for the deco time if
you are doing all the time at 6m, due to that you don't have any inert
gas in your breathing gas.
This code is a reintroduction of 0b8462bd lost somehow between
a70a8898..8fae0031
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- rip all Gtk code from qt-gui.cpp
- don't compile Gtk specific files
- don't link against Gtk libraries
- don't compile modules we don't use at all (yet)
- use #if USE_GTK_UI on the remaining files to disable Gtk related parts
- disable the non-functional Cochran support while I'm at it
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Relatively straight forward, just a handful of places where we call
show_error() (a UI function) from the logic code. In the process I noticed
a few places where error returns weren't dealt with correctly.
Added a new planner.h files for the necessary declarations.
This should make no difference to functionality.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Relatively straight forward, just a handful of places where we call
show_error() (a UI function) from the logic code. In the process I noticed
a few places where error returns weren't dealt with correctly.
Added a new planner.h files for the necessary declarations.
This should make no difference to functionality.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
