When first tested this commit, especially the dive list was looking
terrible. However, after including newer SHA's from libkirigami, and
correcting lots of spacing/margin issue, a retest of this commit shows
no strange artifact any more, and the amount of warnings in the log
output is reduced significantly. So now, it appears save to
upgrade.
Notice that main.qml still uses Kirigami 2.0. and is not updated in
this commit. With version 2.2, there is a new way of theming, that
is not (yet) compatible with our current code. Blindly upgrading to
2.2 leads to a almost black dive list, wrong button colors, and
runtime errors in the log, due to the fact the direct setting from
QML Kirigami's Theme colors is not allowed any more.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Fix an indentation issue in qt-models/diveplannermodel.cpp.
An if was indented as if it were part of an outer if.
Correct indentation confirmed by Stefan Fuchs <sfuchs@gmx.de>.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Make all char * pointers in pref.h const to make it clear that these
strings are not mutable. This meant adding a number of (void *) casts
in calls to free(). Apart from being the right thing to do, this commit
makes the code more consistent, as many of the strings in pref.h were
already const.
While touching core/qthelper.cpp turn three instances of (void*) into
(void *).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Change an unsigned integer to a signed integer in profilewidget2.cpp,
because commit 1f8506c changed the definition of duration_t from
unsigned to signed.
Since this value represents the number of seconds since a dive started,
there is no possible chance of overflow problems.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Commit d6c013f303 introduced a cast to avoid a signed/unsigned
comparison warning for all translation units that included
core/dive.h.
Commit 1f8506ce64 then changed the definition of duration_t from
unsigned to signed, inverting the effect of d6c013f303.
Thus, revert d6c013f303 to allow compilation with -Wall without
flooding.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In commit e643589233 ("Travis: setup up the desired release message
right away") we temproarily switched to my fork of uploadtool to take
advantage of a new feature that I had implemented there. This has
already been merged upstream, so let's switch back to upstream.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of using the default release message and then trying to fix it up
in the after_success section of one of the builds that we test, let's just
always use the message that we want, regardless which build finishes first.
This currently requires my fork of the uploadtool - the changes have been
submitted upstream and I hope they'll get merged there so we can switch
back to the upstream version of uploadtool.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This very simple commit has a long story. See the mailing list
subject "mobile: android splash screen (and issue 513) opacity
weirdness".
There is even more. I found the following deccription on Internet:
https://falsinsoft.blogspot.nl/2017/07/qml-show-android-native-splash-screen.html
and tried to implement this with the potentially nice Qt functionality
(since 5.8) to manually get rid of the splash screen. Unfortunately,
this does not work. Notice that there are subtile differences in
the here found internet page, and the method originally implemented
in commit 04e994b575.
This fix is as mimimalistic as it can be. Just do not set black but
white for the initial background. Unfortunately, there is still
a small position change of the icon. It is known why, but solving
is left as an exercise to the reader.
Fixes: #513
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Free a bunch of C-style strings before assigning newly copied strings.
One case was particularly buggy:
prefs.locale.use_system_language = copy_string(qPrintable(value));
Note that prefs.locale.use_system_language is a bool, which of course
always evaluates to true! Probably nobody noticed because a restart
is required when changing locale.
Moreover remove a few double-semicolons.
Stefan Fuchs points out that sometimes you get cylinder duplication when
you merge dives, particularly with a planned dive. For example, if we
had different manual pressures in the two different dives, the cylinders
will be kept separate.
But that also means that we don't want to plot the pressures from those
other cylinders that came from another dive and are now associated with
another dive computer.
Change the "seen" logic for the cylinder to ignore cylinders that are
only mentioned by other dive computers than the active one.
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's already used in core/gaspressures.c where it was declared
privately, and we'll have a new user in the profile code, so just
declare it in a proper header file like it should have been.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The "prev" cylinder can never be negative since commit 56c206d19f
("For more manual gas pressure details"), so remove stale code that
checks for a case that cannot happen any more.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The almost 3 year old commit e1db5f21b1 introduced the behavior
that you need to type at least 1 character for a tag to show any
autocompleted data. While this went unnoticed for years, there
is always a user that notices this changed behavior.
The solution is rather simple. Do allow the 0 lenght string
to act as seed for autocompletion instead of just returning, and
doing no autocomplete at all.
As the afore mentioned commit was explicitly meant to prevent over
active firing of the tag list autocompleter, this (simple) change
is carefully tested on this, and no adverse effects are visible.
Fixes: #605 (wrt the 1 character issue)
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Until now accidentally the dateLabel was disabled and the timeLabel
was enabled. Changed this the other (correct) way round.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Add a 'Documentation change' section to the PR body.
This instructs the PR submitter to edit the section
with notes for the team editing the documentation.
If a PR has such notes, a maintainer should then
apply the needs-documentation-change label, so
that the documentation team can easily filter
such PRs by label.
Suggested-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This adds a android-apk-build which runs on travis-ci. This is using a
quite ugly trick, building in a docker container, basically just to get
a newer cmake. The cmake in trusty is way to old to work with android
builds.
A good side-effect is that this is a complete copy-paste for anyone who
would like to build android-binaries them self on Linux. All the
uglyness is hidden away in a docker container.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Back in 6451adfec1, the path to the qt
binaries was changed. The current binaries are back on the old urls, so
this reverts half of 6451adfec1.
The other half is still true.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
This increases BUILDNR in a way that keeps exit status as zero, so the
script doesn't abort due to set -e.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Some BT devices support both, classical and LE, modes. Users could
choose either by prepending or removing "LE:" in the device address
field. After commit d23bd46a1b, the
device field is always disabled in Bluetooth mode.
Therefore, add a mode combo box to the Bluetooth device selection
dialog. In the default mode (auto), the old code path (based on
the Qt device flags) is used. The two other modes (force LE, force
classical) allow the user to force the preferred behavior.
This feature is meant as a stop-gap measure until a more refined
transport choice is implemented. Therefore, the value of the new
combo box is not saved in the settings, to avoid cluttering of
the preferences with soon to be obsolete entries.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The Windows auto-verbose + log file creation if starting
from a non-terminal has the problem that the print_version()
call is never made becase 'verbose' is updated programatically
in windows.c and not by the user (by passing -v).
To work around the issue:
- move the windows console creation call before *everything* else
- then immediatelly install the message handler
- then see if 'verbose' is set and explicitly call print_version()
print_version() now also has a flag (version_printed), to avoid
printing the version multiple times, if the user decided to add
an extra -v to the Desktop shortcut.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
If the user has not started Subsurface from a terminal
make sure that verbosity is enabled (verbose = 1), so that
the log files are populated with information useful for
debugging.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
1) Add new description types:
- 'Code cleanup'
- 'Build system change'
2) Add a 'Release note' section:
The idea with this is that if you make a change
which is worthy of a release note in ReleaseNotes.txt,
it would be best to outline it here but also in the .txt.
This basically means that the PR should also touch
ReleaseNotes.txt with an extra patch.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
When filling samples with values during DC import fill sticky values
like CNS, NDL, stoptime,... immediately into current sample.
Otherwise we will not fill the sticky values into the last sample
created.
Add two new sticky values: heartbeat and bearing
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
The native Windows build does not use the MXE tools
and call such as `i686-w64-mingw32.shared-objcopy`
can fail.
Attempt to first find if the program exists using
`find_program()` and only then call it.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The objcopy calls to strip the debug symbols out of
subsurface.exe need to happen before the installer is
created (staged).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
On Linux we want to test both desktop and mobile, and both the full
feature set as well as a build without BT and without WebKit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a -skip-googlemaps option to the build script since for some
reason trying to build the googlemaps plugin in the Travis mac
environment causes an error with a missing stack-protector-strong
feature.
The build relies on a custom build Qt and a cached homebrew environment.
And the result is of course not a DMG with a signed app but a zip file
with an unsigned app - so it's a bit harder to consume.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>