Unfortunately we are referencing these separators with index, so they
need to be on same order as used in XSLT files.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These files contain a bit of extra data before the actual CSV part, so
we need to skip there to show sensible information to users.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This switches from a couple of labels in the dialog to a progress bar,
to later being able to use it to provide better user experience.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch creates the possibility of viewing the individual sensor
values when the po2 button on the profile toolbar is activated. This
follows exactly the procedure for optionally displaying the setpoint
values while viewing po2. A checkbox in the preferences panel determines
whether sensor information is shown. By default it is set to OFF. When
checked, and the po2 button is activated, sensor1 values are shown in
grey, sensor2 in blue and sensor3 in brown.
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the first dive computer had pressure samples, but the second one (and
no higher one) did, then we would draw a flat horizontal line for the tank
pressure graph (but lable it with the correct pressures). This routine
that is hunting for the actual maxima and minima does have to really go
through all dive computers, not just "this one and up".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This ONLY hides the old flag if the current dive is the only dive on that
location (which seems to make sense).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we don't modify the dive list, the new flag wouldn't show up until
we accepted the change - that's not user friendly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead be consistent with other parts of the code and put us in editing
mode so the user can accept / reject the change.
See #800Fixes#801
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Whoa, this deserves a good explanation.
Everytime that the mouse moved in add / plan mode, or anytime a new dive
was displayed on the profile, this method would be called and connect the
dataModel to the modelChanged method. This added the slot in a call-vector
that the fired signal would call, adding one call to the Slot per add /
plan mouse move (about 20x/s) or each time a new dive was displayed.
Quickly filling the vector with more than 200 - 300 calls to this same
Slot.
The fix is to only connect one time. this made the add / plan mode *so*
much smoother... :)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were updating the dive quite a lot of times, we really didn't need to.
This will help, but not fix, the issues with plan / add dive.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
qt-ui/profile/profilewidget2.cpp:1351:10: error: invalid use of incomplete type ‘class QDebug’
qt-ui/printlayout.cpp:141:27: error: variable ‘QPointer<ProfileWidget2> profile’ has initializer but incomplete type
In commit f9ceff009b ("Clean up the header files") things got broken for
an as of now unreliesed future version of Qt.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move the heart rate graph down to the same space as the tissue saturation
graph so that it does not overlap with temperature or partial pressures.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Lots and lots and lots of header files were being included without being
needed. This attempts to clean some of that crud up.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This cache give us a huge gain in performance, going from
17% moving the mouse frenetically to 9%, wich is quite acceptable.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used to create a new QGraphicsRectItem everytime a Pixmap
changed. Since I'm pretty sure I deleted every bit of the
PictureItem before setting a new one, no leak was due, but this
version is safer.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were calling this even if we didn't really change anything
and paths are expensive to paint.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were recreating the PathItems (one for the outline, other for the real
text) for every call to setText. This was a very un-smart move.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Do the switching based on the index rather than the string (which is
translatable!).
Update set-points when turning on/off CCR mode (remeber: the rebreather
mode is stored in two places: the divemode and implicitly in the setpoitns.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Update O2 metabolsim rate and adopt default gas switch depths to
pSCR oxygen drop.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This reduces a lot of CPU time and makes the overall use of the tooltip a
breeze.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The tooltip animation had a fixed animation speed, this patch
honors the anim_speed on the preferences, and also disables
the animation completely if the speed == 0.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are a few calculations that go on boundingRect that can be avoided
if we simply store the result.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Correct pen and brush set. the ToolTip now is correctly rounded,
translucent and happy.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The rectangle is now correct, but the collors are still
wrong. I'm tracking that down - most probably I've set
the wrong pen or brush ( or both ) somewhere.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Those items were used to fake the background of the path item
but since the rectangle can be painted with a border and a
fill, this is uneeded.
The rect is still ugly.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
a rectangle is *much* faster to paint than a simple ShapeItem,
so this is a safer choice. We still need to create the paint
method so we can use the correct roundness for the rectangle.
Currently it's white with a 1px solid line - terrible. :)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were deleting / recreating the graphics background item for *every*
mouse movement. Now we are just creating the painter path; no more
allocations / desalocations, adding, removing from the scene. This should
make things a tiny bit faster.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While analizing the code for the mouse movement I've discovered that
we did a lot of uneeded things: Set the color, the pen, the size
of a fixed-colored line, twice.
We also deleted-newed the same Pixmap / Text for every mouse movement
so now we reuse the 'entryToolTip' that consists of a huge line and
a pixmap, and after that we add the other tooltips that are not static
Also, reduced a lot the number of calls to expand() (that did a lot of
math).
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Strangelly, this method was being called even if the rectangle was the
same, so we deleted everything and recreated everything again. tsc tsc.
Some more improvement is needed but we are getting there.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Very often the rectangle of the ToolTip doesn't need to change but we were
calling and firing an animation for it for *every* mouse movement, even
when we didn't really needed it.
Now it will only fire something if the rectangles are indeed different.
From my tests we reduced the number of calls to the animatior by about 20%
using a real divelog as test.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is an attempt to make fewer calls to alloc functions when the mouse
is moving.
We were creating a membuffer, filling it (malloc / realloc), then freeing
it just after use. but we could simply hold that allocated area and reuse
it again.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We did three cals to mapToScene / mapFromScene on the mouse moveEvent at
the ProfileWidget2 where we only needed to call one in the common case and
two in the worst case.
This doesn't really help in terms of speed (unless you have a really old
cpu) but since it's code that gets called *very* often, it seemed a
reasonable thing to do.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The QPainter and the QPixmap were being created but never freed. A QPixmap
and a QPainter don't need to be created by new, they can be safely created
on the stack.
So, create them on the stack, pass them via const-reference
and use them correctly.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After looking with great care at the result of the mouse movement
on the profile, and also playing a bit with callgrind I've found
out that one thing that we were doing wrong was the way we looked at the
items in the scene, by calling scene()->items with
Qt::ItemIntersectsShape, our shapes are very complex curves
with thousends of points and we have lots of them. and it usually
doesn't matter because *most* of the time we are getting the
tooltip information from 'get_plot_details_new', so no accessing
to items was necessary.
By changing the access from Qt::ItemIntersectsShape to
Qt::IntersectsItemBoundingRect we had a speedup of almost 500x in a
section of code that's very important, and the good thing, nothing bad
happened because one of the only things that we are using this code is to
get information from the events, not the curves.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Take instantMeanDepthLine out of the code. We have the moving average line
plus the exact data in the information overlay.
Signed-off-by: Cristine Guadelupe <cristineguadelupe@me.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Ignore QWebView instances in the preferences dialog when compiling under
Android, as QWebView is not yet supported under Android.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I could have sworn we did this at some point. The vendors are already
sorted, but the products for each vendor should be sorted, too.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After a partial download (because the user hits cancel or because there
was an error, if the user hits Retry the list of dives downloaded so far
should be cleared because we will simply try to re-download the same dives
again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will crash if for some reason current_dive is invalid.
And in general, when displaying information, we want to use the correct dc
in the displayed_dive, not the current_dc, which references the
current_dive...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When changing to a CCR dive, add a setpoint change to the default setpoint
at the beginning of the dive. Otherwise add an explicit setpoint change to 0
.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is bigger and more invasive then I wanted, but it's hard to break it
down into smaller pieces. Here's what it does:
The former "Download" button becomes the "Download", "Cancel download" and
"Retry" button. So this button controls your interaction with the dive
computer.
The other two buttons are now purely "OK" and "Cancel" for the dialog.
"Cancel" discards what happened (much easier now that we download into a
different table), and "OK" adds the dives that were selected in our
selection UI (by default all downloaded dives) to the real dive_table.
And while redoing all this, I also redid some of the state machine
underlying the dialog. The biggest change that the user will see is that
partial downloads (after canceling or after an error) will still offer the
dives that were completely downloaded up to that point in the selection
menu.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We pass a different table to libdivecomputer (and the uemis code) and have
that table filled. And then we simply copy the dives from that table into
the real dive_table when the user accepts the download.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will allow us to download the dives from the dive computer into a
separate table just for that purpose and not into the main dive_table.
I really dislike the code that's in place that dates back to the very
earliest code written for Subsurface. Dumping the dives straight into the
main dive_table seems really stupid to me.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we now track all clicks on the row, having the setData() actually
neutralized the action that we took on the clicked() signal.
Now you can select / deselect a dive, regardless where in the row you
click.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Yet another bug because the indices are inclusive. We need to start off
with the last being smaller than first and we need to adjust the row
count. It might be easier to just fix thing to make last be exclusive...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes the issue where there was no visual feedback when clicking on
the second or third column in the grid. It would actually change the
checked state of the checkmark internally (and you would see the new state
once you clicked on another dive), but it wouldn't give immediate visual
feedback.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The array we allocated was one entry too small.
On the flip side, let's just make sure we cannot call this with a negative
range. That would be bad, too.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Correct minor malfunction with CCR setpoint display. It was showing even
when the po2 display was turned off. This patch ensures that the setpoint
graph only shows when the po2 toolbar button is activated (and in addition
the appropriate checkbox in the Preferences).
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previous code suggested a "upgrade" if your firmware where other than
whats parsed from the autofirmware call.
This switches that logic into only suggesting firmware upgrade if the
found firmware is newer than the firmware your device runs.
The previous logic was very annoying if you have a device running a
development version of the firmware. If you have taken that step of the
guided path, you shouldn't be told to "upgrade" to something older
every time you download from your computer.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't get location data from the dive computer (at least not from
99.99% of the dive computers today). And we really need to show the data
in a human readable format.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fix the name of a button so the download from dc actually works.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes a crash where we tried to get the data without actually having
downloaded anything.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This tries to relete from the dive list the dives that shouldn't be
imported.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Create an on_ok_clicked that will do the actuall parsing of choosen dives.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now, ok should close the dialog, and not download the dives from the DC,
this way the user can choose what happens.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now the user can click on the dives that they want to keep.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Here we list in the model what are our dives, inside the dive_table.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So the user can remove the ones they don't like.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to reparse the file when the known type changes and want to make
sure that we only try to guess the separator and the columns if the user
hasn't told us otherwise.
For the predefined imports this then looks up the correct columns and
places the correct headings there - and then allows the user to modify
them if needed.
This has been lightly tested, there may be dragons.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With the new infrastructure colum numbers are 0 based, so the indices had
to change.
This commit also adds the column names for sample based formats (and ends
up re-indenting parts of that code).
This doesn't make things work, yet, but it's a step in the right
direction.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we automatically matched the columns this might already be correct. So
the standard text is confusing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Resize the components of the divelog import dialog neatly, with the
table view expanding to fill most of the available space.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I used to compare strings, but since there can be more than one empty
column, this was a very sad choice, now I'm comparing indexes.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This drawns a nice rounded rect around the avaliable column names, using
antialiasing.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Enable the new delegate on the view, and give the items a bit more
spacing, so we can draw things around them.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This new class is the responsible to draw the columns that can be dragged
from the top bar to the bottom one.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is taking a very simplistic approach. It picks the predominant
potential separator. If there is no clear winner, it uses the UI default
and makes the user pick (and either way, this can always be overwritten by
the user).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commits 0de3bc8452 ("Display CCR setpoint values on the po2 graph") and
65eed80e37 ("Don't always show the setpoint graph") didn't take into
account that current_dive could be NULL and therefore accessing current_dc
could crash.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dialog defaults to tab; if a file is indeed comma separated and one
switches to that, data() could be called on a higher index before the
model is re-populated.
I'm a bit surprised why index.isValid() doesn't catch this, but the manual
check appears to work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt has a very bad habit of getting the inner widget instead of the outer
one.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Change the QWidget based approach to the Model based approach, using the
result QStringList for finding if we have the depth or the time of some
specific column.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way the drop target will work when implemented.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now we can correctly visualize the file data, and changing
the separator will update on the fly.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This method populates the model with a few lines of the CSV data to help
the user to define what each column is.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will get the first 10 lines of data, try to separate
them using the separator specified, and then try to make
things display correctly on the table.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This model will show some columns and the user will
need to provide the correct information for each of them
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way we know that we got the correct drag thingy.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We are not correctly readding it yet - be patient.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This piece of code starts a drag and moves around data, it does nothing
with it yet.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This class will handle the drag 'n drop "drag" part.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is needed so the list of items appear in a grid like view.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I know that there is a QStringListModel, but that doesn't
have add and remove methods, and thus I cannot use it. ;)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This mostly cleans out stuff that is going to be uneeded.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Oxygen should be representad by its own solid green colour not the yellow/green of nitrox.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When a CCR dive is viewed and the toolbar button for PO2 is activated,
both the PO2 (green line) and the O2 setpoint (red line) are shown.
This allows evaluation of the PO2 in the CCR loop with respect to the
pre-configured O2 setpoint.
The setpoint graph can be disabled from the Preferences/Graphs tab
by checking the appropriate checkbox.
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fix various discrepancies in the capitalization format, as we are using
'down format' for titles and actions.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The accepting mode variable must be initialized to false to allow
editing of dive data.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Capitalize the word Facebook in 2 occurences in socialnetworks.cpp
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fix small spelling error in configure dive computer dialog.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On Ubuntu 14.04 the edit mode does not exit successfully when applying
the changes. It instead jumps back to edit mode (even though hiding the
option to apply/discard changes again). So let's just have a flag to
prevent faulty behavior.
Fixes#786
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Especially on Mac where there is already a lot of padding around the
action buttons.
Also made the spelling of the zeroMargins variable more consistent.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If I want to use the names to make more sense out of the layouts, I might
as well name them correctly...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is highly dependent on the user, I guess. So I may be totally off
here. But the previous order was pretty much random (and even tried to
push one button in there twice in a row)...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of messing with the margin (which didn't work, anyway), we need to
set the size of the icons. Apparently on Linux this was implicitly done,
but on Mac it didn't scale the icons and provided space for the largest
one (and we have a couple that are twice as big as the others).
What we really need are scalable icons that allow us to set the icon size
relative to the font size. But for now this solves the ugliness on Mac.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was silly; if we rely on this to be zero to indicate no change then
we better zero it out when we start editing.
Fixes#805
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A value of zero (which is the normal legacy one) remains "unknown", but
the divecomputer backend can now give both gasmix and cylinder number
this way.
Currently only the EON Steel backend does that, but it should be easy
enough to extend others too.
Also, fix the user-visible cylinder numbering in the cylinder change
tooltip to use a human-friendlier one-based numbering (ie first cylinder
is "cyl 1", not "cyl 0")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We zero out the displayedTrip and only copy changed data into it; so a
NULL value is not deleted text, it means there was no change.
Fixes#805
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Oops. That was supposed to do the opposite of what it ended up doing. The
goal was to NOT check for two weeks when the user updates to a new
version.
Instead it always checked when the user updated to a new version.
This mostly would hit developers...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code tried to look up the cylinder index from the Qt data models,
which was not only horribly confusing, but was also buggy. I think the
index ends up being off by one when the first cylinder change is hidden
(because it's at the beginning of the dive), but I can't make heads or
tails of that crazy code, so there might be something else going on.
Just remove all the crazy code, and use the event data directly. Which
gas the gasmix and the (potential) explicit cylinder index already.
It's much more straightforward, and it just automatically gets the right
end result whether some other event is hidden or not.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
At least on the Mac some objects appear to have generous default margins.
This creates a somewhat less wasteful layout. Still we have those massive
margins around the toolbar buttons.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The goal is to have things look as consistent as possible - so if some
elements have another nested level of layouts, their margins need to be
zero.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This time for the mainwindow.
This includes an adjustment in the C++ code where we actually referenced
one of those weird generic names.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now that we set the margins everywhere, the manual corrections here aren't
needed. At the same time, the spacing for the labels looks better if it is
a tiny bit more generous.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The hard coded margins were random and inconsistent and generally ended up
with a rather unbalanced look. This was worse on Mac than on other
platforms, as there the margins get exaggerated for some reason.
This code is a bit of a hack and a bit brute force, but it seems to work
to create a much more pleasing appearance. It may need some fine tuning
(depending on OS or DE (under Linux)), but it definitely seems like a
massive improvement.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had two internal layouts, each of them using 6 of spacing,
wich accounted for 24 of spacing if we took into account
items side by side.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I can't remember why I decided to show the survey immediately if someone
was running a development version. Seems silly to me in retrospect.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Store the last version used, the next time we can check, and the decision
if the user does or does not want these checks in the settings.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Flat mean depth line (whole dive, not the instant one) is redundant as we now
have a much more useful mean depth graph.
Signed-off-by: Krzysztof Arentowicz <k.arentowicz@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As we already have running depth sum values for each sample
why don't just plot running average depth graph.
Signed-off-by: Krzysztof Arentowicz <k.arentowicz@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Avoid crash when moving mouse to left side of the plot when showing
mean depth
Signed-off-by: Krzysztof Arentowicz <k.arentowicz@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is in the form major.minor.subminor.commit_nr and makes it easy for
the backend process on the server to figure out what to do.
This changes the query argument from ver to version so the backend knows
that this is now a canonical version.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Unit selection is supported only for CSV exports, thus enabling the
selection only for those.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I wanna use some of it on the InstantMeanDepthLine
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way we can poke around data for the mean depth line.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This class will hold the visible line of the mean depth for the time 'now'
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It was impossible to guess what this column was just by looking at it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was missing on the UI and it was really hard to guess what it was.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes sure the UserSurvey object is removed correctly by the qt
object tracking system.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Back in 71dbcdc0d6 ("Added the option of opening User Survey form
explicitly") a define for not adding the user-survey was created.
This is quite unnecessary and this removes that option.
Based-on-patch-by: Nikhil Bharadwaj Gosala <nikhil.gosala@gmail.com>
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We set the real tool-tips with setBtnToolTip from maintab.cpp, so this
is just duplicate and miss-leading.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We check that the logbook download didn't error out before checking if
we should remind the user to upgrade the firmware. Otherwise we will
check if whatever the current firmware version is, is greater than zero
and always remind the user to upgrade the fw.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The OSTC Sport exits bluetooth mode after the loogbook download. To
update the firmware in the OSTC Sport, we need it enabled again, so we
gently remind the user about doing that before continuing.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Date and time needs to be a string, not a time_t.
Duration should be called that (and not time) and wasn't hooked up.
Also added a helper to get the duration string.
Finally reordered the components of the text that is shown to make it more
natural (or I should say, more in line with the order we use elsewhere).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This now is chosen directly from the popup box that appears when you try
to send a picture to facebook.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Generate the stub message that will go on the Facebook picture upload.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This dialog is used to choose what goes into the message of the profile.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way we are sure that the upload was made in the correct folder.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move from the Dive List context menu to the Dive Info tab, it will only
appear when connected to Facebook.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This caused a crash when trying to call the firmware upgrade from the
downloader - no idea how this worked for the other caller (from the main
menu).
Anyway, with this the "offer to upgrade the OSTC after a download from an
OSTC that doesn't have the latest version" is indeed functional.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This successfully downloads the hex file.
The actuall update of the OSTC fails before it gets started with a crash
when the ConfigureDiveComputer object is created.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Heinrichs Weikamp is giving us stable URLs from which we can get the
latest stable version. The parsing is a bit simplistic, but it seems to
work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Better parsing of the website data, a simpe dialog that informs the user
that they should upgrade their firmware.
Still doen't call the right code path to DO the upgrade.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This rearranges the code so we can call it from the download dialog and
tell the user if there is a newer version of the firmware available.
This needs a proper dialog and needs to be hooked up so that the user can
accept the suggestion and go directly to the firmware update code.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is only partial. It prints the current version string (to be
processed by a regex) via qDebug().
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This still only works for FB app admins at this time.
It always sends the dive that is shown in the profile.
It uses the resolution / size of the profile on screen.
It doesn't add any description and doesn't ask the user for explicit
permission to post (a preview would be even better with the ability to
edit the post).
But it's a great next step!
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And I had to create the Http header by hand because I couldn't
figure out how to do using HttpMultiPart from Qt.
not fun.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This increments the column number automatically when doing manual CSV
import. Counter is decreased when un-checking checkboxes, but that is
all the logic there currently is.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All Facebook related stuff now is on SocialNetworks.h/cpp
this makes it much easier to implement things and looking
for bugs.
working:
- logging in
- getting user id
- getting album id ( or creating it )
*much* more testing is needed, of course.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This reverts commit 6e72b5b8c5.
That broke the functionality to add elements to the tables in the planner
and the equipment tab.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We still need to do a lot of stuff on that part.
Currently when asking for sending a profile, it will just
create a private album.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a button to disconnect from facebook.
This clears the webview cookies so it correctly
disconnects us from facebook, and clears the
access token.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We can now correctly connect to facebook endpoint. Nothing
really fancy at the moment. =/
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This piece of code allows subsurface to login with facebook
using the 'Subsurface' app created within facebook for secure
reasons. I'm the admin of it currently - but I'll pass it to
Dirk as well.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't want to waste space, but we don't want things to be too crammed
together, either. Especially not having horizontal margins for text can
look very awkward.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This enables the dormant OSTC3/OSTC Sport firmware update code, now when
the hw_ostc3_device_fwupdate call is available in libdivecomputer.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is intended to export all the details that someone might copy from a
paper logbook. We need a matching import template to make this simple.
This hasn't been well tested, I'm sure it will break when elements and
attributes are missing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code sets the parameters properly to support the new fields in
manual CSV import.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This enables and disables the spinbox according to check box selection
for new fields in manual CSV import.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds fields for cylinder and temperature information on the
importing dialog.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This removes unused strings from ui files. These showed up for
translation and are quite meaningless to translate.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This creates a destructor for ProfileWidget2 that deletetes its new'ed
objects on exit.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After we created a QString from it, we need to free the char*.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As per the suggestion by Dirk Hohndel, I changed the "Type of Diver" from
RadioButton to Checkbox.
The User Survey UI was not clear earlier, so I grouped the similar options under
a question. I also modified the language and re-arranged the visual components.
Earlier, the user could choose contradicting import types at once. This has beencorrected by using RadioButtons instead of CheckBoxes.
Signed-off-by : Nikhil Bharadwaj Gosala <nikhil.gosala@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The UI in the User Survey page was not clear and the Text Blocks were getting
cut. So I increased the size of the Text Blocks.
Also the survey was using CheckBoxes instead of RadioButtons. The problem with
this is that the user could choose to be both Recreational and Technical diver
which cannot be possible. So I replaced the CheckBoxes with RadioButtons.
I also replaced the CheckBoxes, which asked the user from where he was importing data, with RadioButtons so that the user can select only one option.
I also modified the English used and made it concise and clear.
Signed-off by : Nikhil Bharadwaj Gosala <nikhil.gosala@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Earlier, there was no option for the user to explicitly open the User
Survey form. This has been corrected by placing an option in the "Help"
menu by which the user can explicity open the User Survey form.
Signed-off-by: Nikhil Bharadwaj Gosala <nikhil.gosala@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since replotting is expensive and it is triggered while scrolling
through the list of cylinders, better not do it for improved
user experience and replot only after the combo box loses
focus.
I hope this...
Fixes#768
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
<marble/MarbleDebug.h> is not availaible in all Marble versions.
As Marble::MarbleDebug::setEnabled(verbose) is only used when
MARBLE_SUBSURFACE_BRANCH is defined, also include header file only when
MARBLE_SUBSURFACE_BRANCH is set.
Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Manually inserting set-point changes at negative times (left
of the profile) caused the setpoint to end up at stupid values
(probably some signed/unsigned confusion). This patch aligns
them with the start of the dive.
Fixes#774
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Calling Subsurface with -v now gets you debug output. Of course, with a
regular "release" build of Marble you still won't see much. But with the
changes in the special Subsurface-testing branch you actually get some
very useful information when debugging a lack of maps in Marble.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Depending on the options shown, the latest change appears to have moved
the temperature graph a bit too low. This seems to work better in my
experiments.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This micro patch adds the ability to sort the lists alphabetically
for user interaction. Dirk asked me to do this for location, but
this actually changes for location, divemaster, buddy and suit.
Seems a good thing for all.
Fixes#780
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When opening the filter dialog we allow the user to filter the choices
that are shown. The text that they enter in that filter for filter
criteria should be treated as case insensitive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
No idea why this code was there... but what it caused was an invalid
access to checkState[-1] when a dive had that first tag. This explains why
sometimes the dives that had that tag were shown, regardless of whether
the selected filter criteria should have excluded them or not.
Fixes#769
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The successful message was emitted in a some what older way then the
other messages so it was always emitted, even on error.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This changes the code so we include all the cylinders from a previous
dive when we re-plain a dive.
Otherwise we would have a hole in the cylinders table when we plan a
dive based on a dive where we have unused cylinders, and it makes more
sense to copy all of them rather than not.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A profiler session in the planner shows that for deep long dives
a significant amount of CPU time is spent in populate_pressure_information()
which interpolates the cylinder pressure graphs.
This patch introduces a "fast" flag for the replot of the profile
which is active while the mouse button is still pressed and that
suppresses this calculation.
In the future, this flag could be used for other responsiveness tunings
of the plot.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a context menu entry to add a setpoint change
event. In particular, this can be used to turn a logged dive into
a CCR dive.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows more space between the input fields in the dialog.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Date and duration formats are not necessarily self explanatory so adding
tooltips to explain the expected format.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For each polygon that we paint we have to step through the
plot_info from the start again.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Before you could 'Cancel' the edit and then would be asked if you wanted
to 'Discard' your changes or 'Cancel'. So clicking 'Cancel' cancelled the
action of having clicked 'Cancel'. That's so confusing, it's even hard to
explain. Yes, it uses "typical" language for user interaction and kind of
makes sense, but it's not easy to understand for the non-technical user.
With the new labels the user is asked to whether they want to 'Apply' the
changes or 'Discard' them. And when they choose 'Discard' the verification
question is still 'Discard' or 'Cancel'. That seems much more consistent.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If not cylinder with type DILUENT or OXYGEN is defined, this function
returns -1 which should not be used as an index to an array. This
patch adds code to check for this return value and exit gracefully.
On line I marked with a comment. Someone more knowledgeable of that part of
code than me should double check that return is here what we want.
[Dirk Hohndel: fixed small oversight...]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Clearly the static dialogs don't work. Even with the previous commit the
dialog still said "Save" insted of "Open". So let's just assemble our own
dialog and be done with it. I hope I got all the options right...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Using the SaveFile dialog to open a file caused it to ask the user if they
wanted to overwrite a file when they actually tried to open an existing
file. This fixes that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way we can specify file names that don't exist and therefore make our
git syntax (/path/to/dir[branch]) work.
Thanks to Tomaz for pointing this out.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a title bar with close button.
Set an appropriate title.
Centred the window relative to mainwindow.
Signed-off-by: John Van Ostrand <john@vanostrand.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code sets up the UI that will allow the user to adjust tank pressures
at a gaschange event. The actual changing of the pressure is not
implemented, yet, so this is disabled until someone finds time to do so.
The scenario is this: a tec diver or sidemount diver without pressure
sensors on at least one of their tanks still wants to reasonably
accurately track gas consumption during a dive. The diver takes notes of
the pressures at every tank switch (I find that odd, but apparently some
cave divers indeed do that as they switch back and forth between different
gases) and then wants to adjust the pressures in Subsurface to match those
written down.
One difficulty here is that the first and last pressure of a tank with no
sensor data is still considered "sensor pressure" - this is basically an
implementation detail in the code that is used to do the pressure
interpolation to have constant-SAC pressure plots for tanks without
sensors. So when we check if there is indeed no pressure data available at
the gas change, we can't just work with the interpolated pressure - if
this is the first (or last) time the tank was used, that pressure may be
marked as sensor pressure.
What's missing is the UI to enter the desired new pressure plus the black
magic that actually inserts this into the dive in a way that doesn't break
the assumptions in the rest of the code. I'm running out of time to do
that but wanted to preserve this code so someone can continue this later.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had the variable. As a pointer. Which we used memset to clear. Ouch -
that smells like some bad cut and paste.
With this change the object keeps the corresponding plotInfo around (just
like some others do) and can use it later. I suspect this code could use
some larger cleanup, but it's a bit too late for this in the development
cycle, I guess. I'm sure I'll regret this in the future...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the context menu of the profile it makes no sense to offer the ability
to switch gases unless there is a gas to switch to.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The only place where I'm not sure if there are unintended sideeffects of
changing over to the new domain is QCoreApplication::setOrganizationDomain
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt by default uses a rather simplistic text heuristic to figure out if a
menu entry is one of the special ones that need to be moved into the
application menu (About, Preferences, Quit - but for Preferences anything
that matches settings, options, config is used as well).
This patch tells Qt to keep its hands off the the DC configuration entry
in the menu.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
RulerNodeItem2::recalculate() does something which is
apparently not a good idea in combination with
RulerNodeItem2::mouseMoveEvent().
Each time the mouse moves, setPos() is called. Then in
recalculate() the x() value is checked and if less than 0
it's changed to x = 0 (setPos(0, y());).
This last call (setPos(0, y());)
however does not work and the value remains less than zero
leaving one of the ruler points outside of the graph.
To solve the issue we add a silly explicit check if x() < 0
before calling setPos() in RulerNodeItem2::mouseMoveEvent().
The 'x() > timeAxis->posAtValue(data->sec)' strangely works
on the other hand.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Extend the tooltips to be shown both on the labels and the values and add
tooltips for all min/avg/max elements.
To avoid confusion when only one dive is selected, no longer show min SAC
or max SAC or min duration or max duration.
Fixes#694
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove the unused upper widget, set a somewhat random but at least more
reasonable default size and finally support Ctrl-W and Ctrl-Q shortcuts.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also fixes a bug in the diluent pressure interpolation
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Maybe it would be better to just copy the whole structure and then clear
the things we don't want to copy? This seems fragile.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We copied the string pointers instead of copying the strings. Once those
got freed, things went downhill.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
--047d7b8737f87ede8e050803e6b2
Content-Type: text/plain; charset=UTF-8
<div dir="ltr"><br></div>
From 3db4a422485374801ca2f6233ec23b8671a8656d Mon Sep 17 00:00:00 2001
From: Tomaz Canabrava <tomaz.canabrava@intel.com>
Date: Sun, 16 Nov 2014 23:22:58 -0200
Subject: [PATCH] fix 727 - position correctly the popup.
When the user entered a tag and that made the message box display
the popup with the possible choices was still in the old position
hidding the line edit.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The MultiFilter itself should walk the dives in a trip. This way the logic
(OR within a category, but AND between categories) is correctly applied
and the flags in the dives are set correctly (which makes the overall
counts for dives filtered work correctly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the text easier to translate (and more meaningful).
Also modifies its position to be centereed in order to look less "squeezed
into the corner".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
But the filter count seems to be broken for some reason and
I really don't know why. It seems to work for tags, but
not for everything else.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
as we load dives and dives, new DiveEvents will be created
but the transparent pixmap never deleted, also this makes
the transparent pixmap only for the correct event, not for
all of them.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some dive computers appear to have heading data in every sample. In order
to avoid a completely cluttered dive profile we no longer show a flag for
every heading event but instead show a basically transparent pixmap (which
is invisible to the user) that allows us to report the heading information
in the tooltip but leaves the profile uncluttered.
Fixes#586
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add the .txt to the list of all dive log files as this is the file we
expect to be opened for Poseidon Mk6 log files.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Seems like QMarginsF and QPageLayout were added quite
recently - in Qt5.3!
We attempt to support older versions by using something
found in the Qt4.7 documentation.
Patch also fixes small ordering issue where top / left
margins were swapped.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All the print options will be stored after the user closes
or "cancels" the print dialog.
There seems to be no good way to store the last
selected page size, because print dialogs are different and
some just list them as strings - A4, A3, etc.
The patch also applies the following changes:
- renames display.h's 'struct options' to 'struct print_options'
as these were really just for the print dialog
- the print_options dialog now stores more options as 'bool'
- demote PrintDialog's 'printOptions' to 'private'
Fixes#653
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is no longer just a tag filter. Also, since we use this entry (and
its shortcut) like a toggle we should mark the menu entry accordingly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the last of the series of Macros that I'll do to ease
the creation of a QStringListModel based filter.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
New method to simplify the creation of 4 of the common
methods for each filter in an easy way. There are
a few other methods that I'm also thinking on how
to do this.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
samething as the other commits, use common code.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The setData of any filter based on a StringList with
checkboxes should be the same, so let's use the same
codebase for it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is just to simplify the creation of more filters.
more macros will be used, because I tend to abuse them.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We already have a bunch of filters, let's pack them together
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Depth is often mentioned in a length unit, but what we care about is
pressure. When diving in fresh water the pressure is lower than the same
depth in salt water. This adds support for using different salinities in
planning.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
By popular demand, this changes the names of the Suunto Safety levels.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way other parts of the code can act on the "hidden_by_filter" state.
This also cleans up the way we track if a dive is hidden - do it in the
multi filter instead of the individual filters.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Code to clean the filters. Maybe I'll also need to call this upon
closing the dialog?
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
clicking on the close button will close the widget.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Buttons to close, minimize and clear were added. We need better icons.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
a bit of extra spacing was necessary to get rid of the scrollbar.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The extra info didn't had a Layout set, this makes the
design hard and not resizable. fixed by using a layout.
I also changed a ScrollArea for a GroupBox, since the
Model already has a ScrollArea.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The .location and .notes fields can end up being NULL,
in which case copy_string() is safer.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a rather brute force implementation. It might be worth while
caching this information - but I'd like to do some benchmarking, first.
Sadly this code also shows that there are some bugs hidden in the
selection code when filtering is present. When a trip is selected all
dives in the trip get selected, even those that are not visible under the
current filter.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
ppO2 represented with 2 as subscript.
Special l symbol for litres.
Capitalisation to bring in line with existing style.
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Spelling fix for ampoea
Remove bogus HTML string from UI file
And fix the translation sources accordingly
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And added a missing liquivision item in file open dialog.
Signed-off-by: John Van Ostrand <john@vanostrand.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Try really hard to ensure there remains a valid selection. Only if none of
the dives are selectable should we give up.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we end up trying to restore the selection where the selected dive is no
longer visible (i.e., it's now filtered away), this code caused a crash by
falling first() on an empty list. Let's not do that.
Fixes#758
c++ have some idea about in what order things should be initialized.
This makes us comply with that order.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The buddy list generated by the buddy tag logic gets separated by
,<space> so this trims away any leading spaces from the buddy name.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way any extra data probided by the dive computer is visible to the
user (without other processing). This data cannot be edited by the user as
it reflects the information given by the dive computer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While in a multi dive edit we want to apply our usual semantics (only edit
things that are the same as in the current dive), when doing an explicit
copy and paste that doesn't seem to make sense. So we manually override
that behavior.
Fixes#753
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previously we only applied the type of tank (description, volume, working
pressure) to all selected dives where the tank description matched.
With this patch we also copy the gas mix into all matching cylinders.
Additionally this addresses the issue that we should have a separate copy
of the cylinder description string for each dive.
Fixes#754
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When replannig a dive, offer another button that creates a new
dive rather than overwriting the old. This should help in creating
several versions of a planned dive (longer/shorter, deeper/shallower
etc). Note that this makes dives that start at the same time not
influcence each other's deco.
Also, only the first of a row of simultaneous dives contributes to
the tissue loadings of later dives.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It seems, on Linux qrgba does not work properly making
stars with alpha red when selected. So the patch returns
to just rgb without transparency but decreases the contrast
to white by a factor of 5.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Oddly Qt left the trips selected (but all dives where unselected in the
UI). This got our internal state rather confused. With this change we
clean up that mess and go back to just having those dives that were
originally selected and are still visible show up as selected.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Only dives that remain visible stay selected. And if all selected dives
are removed by the filter, pick a new selected dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As my wife kept pointing out for a long time, the greyed out stars
were heavier as images than the yellow selected stars. This patch
makes the grey stars semi-transparent.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Acked-by: Andrea Fischer-Helling <andrea@fraufischer.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is needed to get the correct maxdepth when replanning
leads to a shallower dive.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When changing tanks we triggered a replot - but that overwrote the
displayed_dive with the current_dive before the remaining data from the
displayed_dive was used to edit the current_dive.
So now we delay this until later in the function, this way copy of paste
of both tanks and weights works.
Fixes#753
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Hunting down a different issue I managed to cause a crash here when trying
to copy a string that ended up being NULL.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Tool tip not needed, text already provided on mouse-over
Corrects captitalisation style
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use 2 subscript on ppO2
Adhere to agreed capitalisation style
Reset instead of resetted
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we only store things in the preferences if they are different from
the default, the existing code that simply compared with the settings
value didn't work when people used the defaults.
We now compare to the actual preference at runtime which should address
that.
Fixes#731
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
forgot to add that we used multiselection when I recreated
the dive list.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Multiple layouts had the same name="gridLayout_3". Fix by shifting all
the numbers up by 1.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I was comparing the strings in the opposite direction.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just the skeleton of the functions, nothing working yet.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The multifilter widget is a container with all the filter
widgets inside of it. currently there's just one.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It was impossible to remove the tag filter after opening it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Disable the possibility to collapse the pannel in the
mainwindow when seeing everything.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch moves the filter from the collapsable pannel
and puts it in an uncollapsable way above the dive list.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Yikes this was stupid. We mixed changing the displayed_dive and the
current_dive. So we'd pass in the displayed_dive and a pointer to the
dive_computer structure of the current dc in the current dive. Oops.
This makes much more sense. And:
Fixes#738
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We forgot to clear out the pre-existing tags. We did this for the actual
selected dives that were being edited, but not for the displayed_dive, so
deleted tags showed up again on screen (even though they were correctly
deleted from the selected dives in the dive list).
Fixes#732
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This reverts commit d5f19c43c9.
With the changes to the headers in commit 3515ad71c1 ("Divelist: remove
units from header, add tooltip") I think this isn't needed anymore and
actually reverting it creates a cleaner look.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The whole "duration in seconds" is being way too OCD about the
information, and just makes it harder to read.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Without this I was only able to close it by choosing to print.
Signed-off-by: John Van Ostrand <john@vanostrand.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should help with the issues we are having with alignment / visibility
of the relevant information in the divelist.
Most people will never switch the units (or maybe switch them once, the
first time they use Subsurface). So having the units shown in the table
header quickly becomes redundant - yet having the units in there causes
all kinds of layout issues.
This patch adds a tooltip to both the header and the main data area of the
divelist. The tooltip shows the column name plus unit and the column
header no longer shows the units.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When entering a gas switch manually, explicitly show the different tanks
that are available and correctly switch between different tanks with the
same gas.
See #702
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of the 30 second heuristic we only assume that this is an explicit
first gas if the event coincides the first sample.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This prevented import of log files other than CSV and TXT.
Signed-off-by: John Van Ostrand <john@vanostrand.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Subsurface can now open CAN files as an alternative to importing.
Signed-off-by: John Van Ostrand <john@vanostrand.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This isn't Cobalt specific, this is specific to dive computers that
indicate the first tank that's in use with a gaschange event that
coincides with the first sample.
We need to make sure that we suppress showing that gas change event
(regardless which cylinder it goes to) and instead set the correct
cylinder index from the very start of the dive.
This works with the test data I have and doesn't seem to break thing with
any of the files that I tried... but I'm worried that this is not the
right way to do things.
Fixes#742
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This prevents a warning caused by -Waddress, that the address
of 'displayed_dive' will always be defined.
Exact macro variant suggested by Dirk.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will parse date information from Seabear log file and skips the
"header" data to allow parsing of the CSV content.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This creates a delegate to simplify the handling of gas components and
the change depth.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This creates a delegate for the type column to choose the type value for
gases that is less confusing then the raw value.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I fixed up the decode and finished the parse for Cochran EMC, Commander
and Gemini computers. I suspect that this code may only work with files
from certain versions of Cochran Analyst. It works with my own CAN files
and with the samples that came with Analyst v4.01v.
A seemingly arbitrary offset of 0x4914 is needed to access data.
The previous code uses 0x4a14 and 0x4b14. I suspect these are from
different version of Analyst.
[Dirk Hohndel: whitespace cleanup, add files to subsurface.pro, made sure
this compiles without the corresponding patch to
libdivecomputer (that isn't upstream, yet), cleaned up the
usage of structs, removed a few unused variables]
Signed-off-by: John Van Ostrand <john@vanostrand.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On the OSTC's the salinity is in kg/l and is stored as kg/l * 100
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The OSTC supports a bit different functionalities than the OSTC3 does.
The "unsupported" bits are
setBrightness
setCalibrationGas
setCompassGain
setDiveMode - Bult into setDecoType (OC/CCR)
setDiveModeColor - Lots of different colors
setFlipScreen
setLanguage - Controlled via flashing different firmwares
setPressureSensorOffset
setUnits
setSetPointFallback
setCcrMode - there are some ppO2 reading functionality in the fist gen
OSTC that we don't care about, and the rest is controlled
via choosing a CCR deco algorithm
Also the OSTC have a notion of number of dives it has done, so this adds
ui for that value.
There are also differences in how some values are handled. Ex the OSTC
don't have fixed samplerates that you can choose between. You can rather
just set your sample rate to X seconds.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The problem that we were comparing signed and unsigned ints was originally
found by Lubomir. As image times can be negative (and the comparison should
fail in that case) we need to compared them as signed.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Acked-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The icon comes from heinrichsweikamp.com, the same as the ostc3.png did.
I've emailed with Matthias Heinrichs at HW and they have given us
permission to use both the ostc3.png and ostc2n.png under the GPL v2.
They also can provide the hi-res originals if anyone needs to do more
work on these icons.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We now include the Ui header file, so we can remove the forward
declaration.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The device supports a up to 60 chars custom text. This limits the
LineEdit to that amount, so users see when they reach the max limit.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a shortcut, Ctrl+Shift+C to jump into the Configure dive computer
dialog.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit a85a219df3 ("Add ability to replan a dive that we planned
before") I completely mishandled the saving of the replanned data.
How embarrassing.
Fixes#747
See #527
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
DiveLogExportDialog::export_depths()
We set a default value of 'unit' which will silence the warning itself.
Then hope that the compiler will respect the argument order i.e. call
get_depth_units() (which sets 'unit') before using *unit as the last
argument passsed to put_format().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
"gridLayout_1" is used twice. Re-order the grid layouts as 1, 2, 3.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
MainWindow::on_actionReplanDive_triggered():
If a dive in the divelist does not have a "DC Model" for some reason,
selecting "re-plan" from the menu will pass a NULL value
current_dive->dc.model to strcmp() and break before the debug output.
To fix that we check if the said .model value is NULL.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds support for importing the logs from a Poseidon MK6
rebreather. This DC produces logs that contain of a .txt file that has
all the meta data and a .csv file that contains the sample readings. The
CSV file is different from the others in that it has a line per each
sample reading at given time. Thus we have to merge all the lines from
one point in time into one sample reading of ours.
[Dirk Hohndel: addressed some compiler warnings]
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When dropping to the bottom in plan (and add) mode, the gas label was
placed along the diagonal line from (0,0) to the second dive data point
(i.e. the one at the end of the "at deptch" segment). That looks terrible,
the label needs to be along the segment that we are spending at the
bottom.
This patch fixes that problem.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a icon to the Vyper config page. The image is taken by me of
my Suunto Vyper. Thats the reason for the quality.
Question: Would it be ok to grab a PR image from Suunto's web page to
use here? If so they got better ones...
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We currently don't support update firmware for the OSTC3. Where waiting
for support in libdivecomputer for that, so disable that button for now.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Working on HTML exports to support imperial and metric units and also
custom selected units based on subsurface preferences.
User selected units is exported to settings file that will be mainly used
by listlib javascript file.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The pre-existing tissue load going into a dive can change if the start
time of a dive changes. Therefore we need to recalculate the ceiling when
editing start time (or date) of a dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While the existing code worked fine for editing that start date or time of
dives downloaded from a dive computer or imported from some other source,
for manually entered dives this did not work and the date or time was
always reset to the original time once the changes were saved.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Ensure that there is no (clipped) overflowfrom the header.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The previous hard-coded solution for GTK+ didn't work on HiDPI, and a
comment hinted that even on Mac OS X it might need tuning. Find a more
generic solution that should work regardless of platform and style,
based purely on the geometries reported by the style itself.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also, generate the corresponding pixmap only once, and distribute it to
all models that need it.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The latest CCR patches had rendered the planner not usable for CCR dives.
This patch corrects this (and reenables the CCR set point column for
segments). The problem was that a new member setpoint of struct divepoint
had been introduced, but there was already po2 which had the same meaning.
This patch merges the two and renames them setpoint to prevent future
confusion.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the settings not previously available in the OSTC3 settings.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This creates a Advanced settings page for the OSTC3 and moves the deco
settings off to that page.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These settings are gas related so they fitted in the spare space in the
gas screen.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I hope this time I got it right. basically, the old code
tried to guess where the plus icon should be with a fairly
bad set of defauults.
This one patch asks for the Qt style where everything is and
uses that knowledge to make it be in a more sane position.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Giuseppe Bilotta <giuseppe.bilota@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Collect font, font metrics and icon size functions in a separate module.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Compute the default widths for the columns in the dive trip list from
their header and (expected) content length rather than some fixed pixel
sizes.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't hard-code column widths or icon sizes/positions. Instead, compute
them from the fonts used.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of hard-coding the icon sizes and spacing, compute them from the
font sizes, that Qt auto-computes from the displya DPI.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The default IMG_SIZE and SPACING in the StarWidget are not appropriate
for HiDPI displays. Replace them with StarMetrics which are
auto-computed from the (default) font size (which Qt determines from the
display DPI settings).
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The type is now a double. It was a int during development, but due to
the feet/128 precision i changed it to a Double, but the default value
wasn't changed type on.
All the Qt tools swallowed the number there without complaining but the
Qt designer insisted on changing it to a double.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The fist column is the O2% value, and was handled like that in the data.
It was only the column header that was wrong.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Almost all of our other classes have the ui class as a class member in
the controller code. This switches ConfigureDiveComputerDialog to that
model.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Disable the Update Firmware button if you choose a device that we don't
support update firmware for.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't allow creation of backup files or writes to the computer before we
know we got some data, either from a backup file or from the actual
device.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The default max value for a QSpinBox is 99. The default Saturation
factor for the OSTC3 is 110%. This code sets the max, min and default
values on those spinboxes.
The values comes from me reading the assembler code for the OSTC3.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The default max value for a QSpinBox is 99. The default Saturation
factor for the OSTC3 is 110%. This code raises the max values to 255
which is as far as i've read the ostc3_interface.odt the max value.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is still missing lots of values which are now set to 0 with rather
unfortunate consequences (for example, setting Saturation and Desaturation
to 0 turns off the NDL / Deco calculations). So this code right now is
quite broken.
But at least this fixes the reported crash and gets some valid data
initialized.
Fixes#744
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code connects up the configuration ui with the backing
data structures thats gets read/written to/from the devices.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This builds up a ui to use for all the settings for the Suunto Vyper
family devices. Some of the fields are pure information, eg, max depth
and number of dives, so they are marked read-only.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Decode the gasmix data into a sane format when creating the event, and
add the (currently unused) ability to specify a gas change to a
particular cylinder rather than (or in addition to) the gasmix.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Not only does it make it look more like the libdivecomputer downloaders,
but the uemis downloader needs it in order to support all the flags we
have. Notably "download into private trip".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds an option to the export dialog to write an ascii file containing
filenames of image files a tab and the depth at the time of the image
taken.
[Dirk Hohndel: whitespace cleanup]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The setpoints filled in into the ui where never set on the devicedetails
object so they where never propagated to backup or write settings.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When multiple graphs are displayed at the same time they end up being printed on top of each other.
Scale the lowest graph to accommodate the tankbar.
Add an intermediate scaling step to the depth axis when pp graphs or the tissue graph are visible.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This new version of the TagFilterSortModel actually accepts
*any* new MultiFilterInterface.
So, how to use it to create a new filter:
Implement a class that inherits from MultiFilterInterface
Implement the filterRow method
TagFilterSortModel::instance->add( myClass );
and you are done.
[Dirk Hohndel: removed some debug code and did whitespace cleanup]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A small typo broke the disabling of the graphs for the
newly added curves. ( btw, we need a designer to display
the graphs in a better way, just too much information. )
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes a bit of the logic used. Now we show every
dive if nothing is chedked.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a graphical representation of tissue loadings at the current moment during the dive
to the tooltip box. The layout is inspired by the Sherwater Petrel.Add tissue saturation plot to tooltip
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a toolbox icon to turn on a tissue plot inspired by the bar
graph of the Sherwater Petrel,
It shows the inert gas partial pressures for individual compartments. If
they are below the ambient pressure (grey line) they are shown in units of
the ambient pressure, if they are above, the excess is shown as a
percentage of the allowed overpressure for plain Buehlmann. So it has the
same units as a gradient factor. Thus also the a gradient factor line (for
the current depth) is shown.
The different tissues get different colors, greener for the faster ones and bluer
for the slower ones.
Positioning and on/off icon action still need some tender loving care.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some columns in the dive list makes more sense to have right aligned
than left aligned. This switches the numeric columns to right alignment
so they is more easily compared visually.
But, we keep the NR-column left-aligned because we use its left
indentation as dive-in-a-trip marker.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes two typos found by lintian.
I guess a bunch of translations will need to be updated or something, I am not
sure how they work so I didn't touch them. I presume in the worst case they
will need to be re-translated at the next iteration
--
Salvo Tomaselli
"Io non mi sento obbligato a credere che lo stesso Dio che ci ha dotato di
senso, ragione ed intelletto intendesse che noi ne facessimo a meno."
-- Galileo Galilei
http://ltworf.github.io/ltworf/
From a0e5f48349557fcccd82ba8c7555043de140835c Mon Sep 17 00:00:00 2001
From: Salvo 'LtWorf' Tomaselli <tiposchi@tiscali.it>
Signed-off-by: Salvo 'LtWorf' Tomaselli <tiposchi@tiscali.it>
Date: Fri, 12 Sep 2014 18:25:20 +0200
Subject: [PATCH] Fix typos reported by lintian
Fixes two typos reported by lintian.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch introduces a new structure holding partial pressures (doubles in bar) for
all three gases and a helper function to compute them from gasmix (which holds fractions)
and ambient pressure. Currentlty this works for OC and CCR, to be extended later to PSCR.
Currently the dive_comp_type argument is unused.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a maxcnsText widget under infoTab and populates it.
Note that I manually edited maintab.ui to display CNS and OTU
next to each other and right after gas data.
Signed-off-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
New rules for them, a new item on the model with the text
"Empty Tags" should be marked if the user wants it to be
displayed.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Trips will be filtered if it doesn't find any tags for
dives.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch correctly filter dives based on tags, but it will
also keep showing all the empty trips.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This method should remove a row on the dive list model
visualization if none of the tags that it have are marked
as 'visible'.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This model accepts check / unchedk. Now, I need to also
plug the result of the check / uncheck to the list model.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Place the TagWidget on the correct place on the main window.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was declared on a class definition, but never implemented.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just the ui file and a empty class to start playing with it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Application's default lang is US english, translation to
UK spelling should be done in transifex.
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Sets text strings to follow the style of existing UI components in use of
capitalisation and use of :
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dive computer configuration dialog was a bit cluttered. This
change adds a tabbed interface separating the basic settings from
the gas, dilutent and set point settings
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commits a24eb8ac12 and 0b0860d24a introduced a nasty hack that was
needed back then to make tank and weight selection work on the Mac. But it
caused other unpleasant issues (as mentioned in the commit messages).
I re-tested this with the current Qt5.3 based builds on Mac and this hack
is no longer needed.
Fixes#638
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These are actually javascript files containing js objects and not json
files.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Turns out that the mainwindow reads the settings and sets up things -
except that this has already happened in the constructor of the static
PreferencesDialog. So only keep those parts that aren't handled there.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to get rid of the old default font on Windows (Calibri) we are
going to near ridiculous length. The reason for this is that we in the
past always saved the default font in the settings (how stupid was that!)
and so now even with a new default font in place, since there is an
explicit font in the settings we take that instead of the default.
Instead of requiring our existing users to use a registry cleaner to get
the correct default font on Windows 7 and later (the VAST majority of our
Windows users at this stage), we simply explicitly ignore that old default
font.
There is one very nasty side effect. A user cannot set Calibri as their
font of choice on Windows 7 or later (because we always force them back
onto Segoe). Given how much nicer Segoe looks I think this is an
acceptable flaw - let's hope this doesn't come back to bite me in the
future.
At the same time this changes the default font size handling. We try to
get the default font size of the OS so the app looks "right". This seems
to not give me the expected result on Linux with KDE, but maybe I'm doing
it wrong? Looks good when testing on Windows.
See #712
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Similar change to the dive list. The idea is to not save things that are
the default. This way Subsurface will do the right thing when defaults
change.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is an elegant way around our problem with people who have the
horrible old "100px" column width in their settings. The first time they
run Subsurface after this fix things won't get better, but the offending
keys will be deleted at exit. And the second time they run, they'll get
the much more sensible new default widths.
Thanks to Thiago for this idea.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to start out with valid SAC rates in the diveplan.
Thanks to Gaetan for finding this and suggesting a different fix - this
seems cleaner to me.
Reported-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The webservice backend sends responses in English. Let's do a better job
presenting those in the users preferred language.
Fixes#714
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The modelDataChanged method will remove all items and recreate everything
*right* now we will never use it, because we are not triggering any
changes on the model, but simply deleting and recreating it everytime
we open the dialog. to be changed in the future.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When there's a rowsAboutToBeRemoevd, remove all items from
the scene() by calling scene()->clear(), instead of creating
a method just for that.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we used removed things from the interface we could hit a dangling
pointer, so first delete the items, then let the system delete the rows.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Connects the YearlyStatistics model with the YearlyStatisticsWidget
nothing is shown right now, mostly because I need to do everything
but now it's easyer to add the things that are missing.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the old statistics panel at the botton of the new one to have
a reference view of the statistics while programming the new one.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used to have a very sad way of controlling the statistics,
now we will create the model when there's a need for it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The statistics widget is a beast, one of the parts that I dislike most
on the current subsurface implementation. This is the initial work to
change that to something amazing. This first commit adds the first bunch
of files that I think are needed, and the correct setup for the qmake and
cmake buildsystems.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we can't edit the trip date, we need to remember to
re-enable it after we disable it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Using QToolBar I was able to remove much of the dead code
from the mainwindow.ui xml file by transforming the QToolButtons
into actions and loading them dynamically in the .cpp code.
I couldn't use the designer for this ( as I wanted ) because
Qt has no notion of ToolBars outside of the areas where the
MainWindow should have one, and we use it in a very different
area.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Basically we could end up in a situation where the plotInfo is no longer
valid, yet the model changes and triggers a redraw before the new data is
passed into the TankBar.
Instead of chasing that race condition it seemed much easier to just copy
the plot_data entries and the gas information in the dive.
Fixes#716
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And move the units there.
This is a long going back and forth. What we want is narrow columns. But
what we need is something that's easy to understand for our users.
I'm open to other suggestions, but I think this moves us in the right
direction.
See #712
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was an interesting bug. When adding a dive that would end up in the
middle of the dive list, the newest dive in the dive list would end up
marked in the dive structure as selected - even though it wasn't
visualized as selected by Qt. Bad things happen if the user then made
changes to that dive without selecting something else first, for example
by either editing the dive or doing things to it like removing it from or
adding it to a trip. The same operation would also be applied to the
newest dive in the dive list.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to offer a simple way to remove a calculated deco, if Control is pressed
while clicking on the trash can in the dive plan, that point and all following are
removed. This way the user can Ctrl-click on the first calculated waypoint.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the user right clicks the globe, we should only present the menu action
if there's a current dive, if not, we disable it.
Signed-off-by: Karina Mochetti <karina.mochetti@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The existing code seemed way complicated, made way too many assumptions
and apparently was broken in certain cases.
This code seems very simple, looks correct and should fail gracefully
(i.e. simply do nothing) if things get confused.
Fixes#706
(I hope)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When backing up dive computer settings to XML, the confirmation
dialog shows the default file path. This patch fixes that by
displaying the correct file if the user changes the backup location.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This worked flawlessly on Mac and Linux, but on Windows I needed to add
the explicit setVisible here - not quite sure why.
Fixes#710
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far we only plan OC dives, so let's not confuse things by showing the
set point for the tank.
Fixes#261
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Turns out that the fix in commit f7119bdccf ("Planner: make sure no old
handles are around when entering Add/Plan") was incorrect. We ONLY want to
remove the existing handlers when we re-plan a dive, NOT when we call add
or plan.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is subtle. The modifications to the selection cause a redraw of the
profile. So we need to make sure that we leave the plan state and return
to profile state BEFORE we do this, otherwise we'll call into
createTemporaryPlan() with invalid data.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this information, when we re-plan a dive we can bring the user right
back to the point where they ended - they have the waypoints in the dive
pointes table and handles are shown on the right points in the profile -
and the rest of the dive is once again calculated by the planning
algorithm.
For now this state is lost when saving the dive file as we don't add this
flag in the sample to our saved files. So if we don't find any samples
marked as manually added we add ALL of the samples as way points on the
diveplan and the user has to manually remove the ones that were
calculated.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In some cases we don't appear to remove all of the old handles from the
scene and end up showing a handle from a previous instance of the planner
in the upper right corner of the profile.
This patch makes sure that we remove any stray handles that might still be
around before entereing plan or add mode.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While planning we might have made changes to the displayed_dive. So we
need to make sure that the profile is redrawn after we cancel a plan (or a
re-plan).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When doing this, all waypoints of the calculated ascent are now waypoints
in the plan - so the user has to remove the ascent part of the dive in
order to really replan the dive. That's a pain, but we don't keep the data
around that would tell us which waypoints are user input and which ones
were calculated.
Fixes#527
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's silly to carefully calculate our ascent for each new waypoint that we
add to the plan. Let's get them all in and THEN calculate an ascent.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simply setting the pointer to NULL leaks memory.
And that C++ recursive two function implementation... oh boy.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old implementation was... let's call it creative.
This tries to actually get things right instead of using magic.
Don't pretend that double values are ints.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use the same logic as we do for newly added dives.
As a side effect this patch appears to fix the issues with getting the
newly planned dive selected.
Fixes#692
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In some circumstances Qt will draw a really thick border around
rectangles. This explicitly makes the border of the tank bar thin.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should correctly set all the values and puts us in edit mode.
Testing so far looks good for both single dive and multiple dives selected
(i.e., you can paste into multiple dives).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the GPS coordinates for a dive were incorrect for some reason and the
user wanted to clear them in order to then re-download / apply GPS
information from the Subsurface webservice, prior to this patch we would
always match the location name and re-populate the GPS coordinates, making
it impossible to clear a GPS location without also changing the location
name.
This patch fixes this - but if you have multiple dives with the incorrect
name / GPS location pair, the next edit to a dive that had the GPS
coordinates cleared will re-populate the GPS coordinates (at that point
Subsurface can no longer tell that this was intentional).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Which actually makes the code much clearer as now the object is at the
correct spot on the canvas and the positions inside are relative to that.
No more magic gradiants starting at "92"
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a checkbox for the divecomputer download dialog that allows you
to tell the download to put the newly downloaded dives into a trip of
their own. That in turn will disable the dive merging with any existing
dives, which means that you will not mix up your newly downloaded dives
with any old dives.
That, in turn, is very convenient of you know that some of the dives were
done by other divers (or from testing that happened during servicing etc),
or the dive dates etc were wrong because the dive computer date had reset
due to battery changes etc.
Once you have all the dives in a private trip of their own, you can then
fix them up (delete dives you don't want to merge etc), and then after all
the data is ok you might want to merge the cleaned-up results with
previous trips etc, and then manually ask subsurface to merge the dives or
whatever.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also restructures the code a bit to make it a little more sane and changes
the colors slightly.
With these changes I think we can claim that this
Fixes#557
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This shows a color-coded bar at the bottom of the graph that corresponds
with the active gas.
Todo:
- text that explicitly states gas on the left edge of the bar
- better vertical positioning of the bar
- ability to turn this on and off
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far, the fields for the two SAC rates did not show a unit and were implictly l/min.
Now they respect the settings for volume units. This was harder than I thought for two reasons:
1) Imperial units for SAC are cuft/min but a typical value would be .70. So I made the point
the field prefix and what is entered is actually hundreth of cuft per minute.
2) I had to get the rounding right in order not to get effects like 20l/min become .70 cuft/min (19800 ml/min
internally) which would then become 19l/min when switching back.
While being at it, I gave the gradient factors '%'-signs as units.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch improves on the error reporting for the dive computer
configuration dialog to use config->lastError.
The previous code was using a different argument in each function,
which lacked uniformity.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
To avoid confusion, this code update makes the status text empty whenever
there is an error message. This makes the error message more prominent.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Changes the layout of the ConfigureDiveComputer dialog to use a
list of supported computers on the left, with a stacked widget
showing the configurable details.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
This patch implements the first step towards OSTC 3 firmware update.
Its not much, just file selection, but I will build up on it from there.
Implements a thread to initiate firmware updates. Currently, this is
for the OSTC 3.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Implements support for reading, writing and backup/restore of set point
settings for the OSTC 3.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Implements reading, writing and backup/restore of OSTC 3 Dil Values
(setting 0x15 to 0x19)
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Implements writing OSTC3 gas settings to the device.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Implements the reading of OSTC3 Gas Settings. These are settings
0x10 to 0x14
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Moves non gui classes (configuredivecomputer, configuredivecomputerthreads
and devicedetails) from qt-ui to the top level folder.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
I've moved the .pro file fixes to where it happened, so the rest of the
changes need explanation now. -Thiago
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
I am adding more OSTC 3 settings as I go along. Here, I have
added dive mode and saturation.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Changes the dive computer configuration dialog to use a
tabbed interface. This will make it easier to add new
dive computer models to the interface.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Adds support for more OSTC 3 Settings to the reading, writing,
backup and restore functions. These settings are: last deco,
units, sampling rate, salinity, dive mode colour and compass
gain.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
The ConfigureDiveComputer class now has functions for complete
XML backup and restore. These dump the loaded settings on a
dive computer to an XML file, and there is an option to
restore them.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
This patch enables XML backup. We can now save the settings
to an XML file. Currently this backs up just the basic stuff
such as custom text, language and brightness.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
After splitting dive computer configuration classes, the date/time
setting had not been ported. This adds the same to the classes.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
This patch polishes up on all classes added for dive computer
configuration to give a clean workflow. The classes can now
write and read data from the OSTC 3.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
This renames the dive gas functions to not talk about just nitrox, and
to instead talk about gas.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The column isn't just about NITROX, there might be air and trimix in
there too.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the dive list, calling the column O2% is kinda wrong, because in
at least my dive list there are both air and trimix showing up, so this
renames that column to Gas.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
First step towards multilingual export. Use the existing translation API
to translate and save words to JSON file.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't export total row in yearly statistics unless exporting the
statistics is checked
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Set Default values and remember user selected general HTML export
settings.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add new row to the yearly statistics table containing the total. Total
values are calculated to some columns only, it doesn't make any sense to
add the total value to other columns (Temperature cols for example).
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make exporting statistics to the HTML page optional.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This splits the code in configuredivecomputer.cpp into multiple files.
The read and write threads are moved to configuredivecomputerthreads.h/cpp,
and the device details class is moved to devicedetails.h/.cpp
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Adds a setting to control the device's brightness. Currently I
have only the OSTC 3. Will add more afterwards.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Improves the writing of device name to the dive computer. The
code has been updated to use a switch statement.
This will make it easier to add new devices in the future.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Improves writing of date and time to the dive computer. This
has been tested using the Heinrichs Weikamp OSTC-3.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Following suggestions on the mailing list, this changes the
method used to detect the dive computer family. Detection is
now done using: dc_device_get_type.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Adds a class to write settings to dive computer, and modifies
the existing ones to integrate it.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Added classes for reading data from dive computer. This is
at the basic level and I will expand it as I go along.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Using code from 'downloadfromdivecomputer' class, this code
loads the vendors and products to the respective comboboxes.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Create a dialog for reading and writing settings to and
from dive computers, with a menu entry in MainWindow to
open the dialog.
I will build up on this dialog and change it as needed.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
This one is less verbose and very easy to parse. It's guaranteed to have
five components, separated by ':' with no other ':' in the string:
Subsurface:<version>:<PrettyOSName>:<appCpuArch[/osCpuArch]>:<UILang>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This reverts commit 6fdbf2069d.
That was actually the wrong thing to do, now that I think about it.
Instead we should show the translated version on screen and send a
compact, easy to parse variation of this as the User-Agent header.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we didn't get back a JSON encoded string (i.e., if the response
contained no '"') we would access a QList past its boundary.
I'm somewhat hopeful that this is a last second fix for an annoying bug
I've been trying to figure out for a while.
See #514
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When transmitting the Subsurface version string we always want to use the
English terms, not the localized terms.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It was too easy to remove a picture by mistake, not anymore.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
