Right now this is just calling the same code and setting a flag whether we
are planning or adding a dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This almost fixes it, but the offset from UTC isn't calculated correctly
it seems. Committing and hoping that a Qt expert can help.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Plotted the Scale on the Ruler in the planner.
There's a tiny bit issue - mostly noticiable while resizing,
but it's not a killer.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The Planner should be 'almost' like the profile, with the possibility
to use the mouse and keyboard to input a new plan, so this is a bit
of 'getting there.' I don't like too much code duplication but since
the current Profile Graphics is a crude cut-and-paste from the old
Cairo backend, it's easyer to start from scratch and have it well
organized as Qt code.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Ok on the planner now correctly creates a dive,
a few remarks, tougth:
1 - the number of the added dive is always 0
( but I may be testing it wrong )
2 - the information pane is working only when
the mouse is clicked, this is a regression and
it will be fixed. ;)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The dive plan was bein created on the Profile, this
While this worked out, it created a bit of spaggethi
code, so now the model will take control of *everything*
on the planner.
I tested it quite a bit and doesn't seems to have appeared
a regression, wich is good.
Now that a dive plan is bein created, I can just save it. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Plug the cancel action on the dive planner ( before that, only by
hitting the 'ESC' button things worked, so now you can also click
on the Cancel box that's on the right of the planner profile window.
Also, the beginning of the 'ok' code is also at place.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Position the X and Y labels of the rulers, this way
it's a bit more clear the deepness and the length
of the trip. It's still not the best approach, but
I'm getting close.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Clicking on the plus button now adds a new stop on the planner.
The depth is always 10m and the time is 10 minutes after the
last stop. can be changed by double clicking or dragging the
balls around the canvas.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signal that the model changed when editing plan specific information,
when you changes the ATM pressure or any other information, the
graphic of the plan will be generated again to mirror your actual dive.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Plug most of the dive planner controls that weren't
plugged yet - StartTime, ATMPressure, BottomSAC,
DecoStopSAC, LowGF and highGF are being used by
the calculations now.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Enabled the CC SetPoint settings on the table, changing
it will automatically reflect the canvas. Also fixed a bug
that prevented the 'Air' handling on the diveplanner
table to show the list of options using arrow up and down.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Fixed a incorrect signal-connection call that should'nt
be there anymore because the TableView now correctly
knows what to do with models.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Merged the shared code for the three table views into
one code, this way less code is needed if we need to
construct another tableview in the future.
I still need to clean some of the models too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The code now seems to be mostly working. There is unfortunately
a QAction shortcut conflict between the implementation and the
MainWindow. - I'm gonna fix that in the next commit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The plus sign for time was in a very strange position,
this puts it back to where it belongs, plus a bit of
code cleanup since the planner was in heavily modifications,
this will be needed quite a bit. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Now the planner deletes points by clicking on the
trash icon on the table. The dive planner is almost
finished. <3
next: add a point from the table.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Deletes the logic of divepoints to the model, this
makes automatic updates on the table on deletions.
( remember, to select dive points, ctrl+click on it.
) if you want to delete it, press 'delete', it will
be removed from the graphics part and also from the
table.
Next: delete point by clicking on the table trash-
icon.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The gas choice now works and correctly ( I hope ) calculates
the gas choosen to show on the planner. User can choose the
gas from the list on the visual planner, and also on the table.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added support for changing depth and time on the table.
It now works both ways, one can edit the planner via the
table for a fine tuning. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This commit is the start of the Editable Model work
for the planner, it creates a new delegate and shares
the code for the model that creates the gas types, so
we only need to change in one place to add new gases.
The table is already edition-enabled, but the outcome
is still undone, next commit - put all together.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Made the tableviews share a bit of code, and code cleanup.
The tableviews for Cylinders, Weigth and Dive Planner Points
now shares the CSS and I also implemented the save / load
methods for the dive planner points, so the functionality
is mostly done on the vieualization side. - since we are
now using three tables maybe it's a better idea to create
one class SubSurfaceTable that knows how to handle saving
/ loading of the columns... TODO for the future. ;)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added a 'remove' icon on the dive planner table,
this makes the ui more consistent between the other
tables that also manages addition and removal of data.
the delete method is still unimplemented.
next - css.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Fixed moving a dive point between dive points.
this fixes mostly everything that I have broked
by using a Qt Model instead of a linked list -
but a model is better to make everything updated
and only poke in one place. sharing code++. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Made possible to add a divepoint between two others,
this also implemented the last patch in the correct way.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Fixed entering a dive stop before another dive stop,
the correct way is to fix the position of them but
this is easyer - I'll update the correct one in
a couple of patches.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The values of the dive points on the tableview were
too big, I'm now dividing time by 60 and depth by 1000
to get the correct results.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Fixed a bug where moving a handler would mess the planner
by calculating invalid values to the planner on the model
side.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Moved a lot of code that handled the positioning of the
DiveHandles on the interface to the model. there are a
few bugs left ( regressions ) that I will fix in the
next commits. With this commit an edition of the points
on the widget will trigger a repaint of the planner profile.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Moving the handler on the graphics updates the model on the planner
Unfortunately, the graphics will move back to it's original
position because of the legacy code used to calculate the
dive plan. Next: fix the legacy code used to calculate the dive plan.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Moved the creation of the data plan point to the model,
this way when the user creates a data point on the
graphical planner, or when the user creates the point
on the QWidget based view, both of them will be updated.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This implementation of the shared model already shares
some, but not all data between the two views, but it's
already a huge improvement. When the user clicks on the
visual planner, it will update the view on the qt-widget
based view. The editing of the view is still not allowed,
and removing nodes is not allowed too ( yet. )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Started the model to handle the divepoints between the
Qt Widget interface and the QGraphicsView one. good thing
is that we share code. Bad is that a model is harder to
work, but doable. :)
With this finished ( in a couple of commits ) one can
insert a point on the Qt widget or on the graphics view
and it will be 'mirrored' to both interfaces.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Changed the Window Hint of the planner popup to 'Popup'
this removes ghost items from the task bar.
Hint By: Danilo Cesar
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Removed a bunch of non-used graphics buttons,
since the new widget now contains everything
needed for the creation / cancelation of the
dive plan.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added a new widget to control the DivePlanner, now we
have two widgets, a graphics one and a qt sidget based one.
the Technical divers will most likely use the QtWidget one
while the hobbists will most likely use the QGraphicsView
one. there's not a option to choose one, they both will
appear at the same time.
Next step: make the screens to work.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This bug manifested itself as too long deco obligation when moving
waypoints to later and then back to earlier times as all intermedite
versions were created as dives in the divelist (and the saturation of
these "previous dives" was taken into account.
It is not entirely clear to me how the dive will be permanently added to
the divelist once ok is pressed: One could in createDecoStops allocate
struct dive from the heap rather than from the stack and return a pointer
to it and which is then added to the dive list upon pressing ok.
[Dirk Hohndel: add include file to make this compile]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the possibility to choose gases in the planner,
now the user should click on the name of the gas, a
popup window will appear, asking the user to choose
what gas he wants for that ascent / descent.
now we need to hook that up with the createDecoStops
method that calculates the decompression.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added the current gas used on the planner, now it's a matter
of choosing the new gas, that will be done in the next commit.e
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added a button and a method to reduce time on the dive
planner. The dive planner will not reduce below deco-time
and it will also not reduce below TIME_INITIAL_MAX.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added the code to reduce depth on the planner. Depth
cannot be lower than 40m and it also won't let the
user reduce if there's any point on the 'reduced' area.
the icon is ugly - we need an artist.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added a messageBox to warn the user that he quit with a working
plan, to reduce the risk of unwanted loss of work.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added the left / right shortcuts for moving the handlers around in time,
this also made me wonder why we have the 'previous dc' on the menu, it
got actually to broke my code on the shortcuts for the planner because
they are active everytime - should they be active only when the profile's
visible or they serve any other purpose?
If they serve only for the profile, I'll get them out of the menu and
put them in their proper place - the profile view.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
