Adjust the color for pN2 to the standard for this gas (black). We keep pO2
green (even though the ISO 32 color for that would be white). pHe is
marked in brown (which is the matching standard color).
Calculate correct partial pressures for the synthetic plot info points at
the beginning and end of the dive.
Minor fine tuning to the positioning / scaling of the temperature plot
when partial pressures are plotted.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So few of my dives are on air that at first I didn't notice - but for
those dives we set the o2 permille to 0 - which of course causes incorrect
(and extremely deadly) pO2 of 0...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fairly simplistic change that modifies the way we calculate the "maxdepth"
for a particular dive as that is used to scale the plot vertically.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Not sure this is the best naming scheme (General Settings / Tec Settings)
but it's a start.
The idea is to have the settings that a recreational diver might care
about on the first page, and all the other stuff on the second one. Let's
see how this works out long term. For now I moved OTU over and added
toggles for the different partial pressure graphs (only the pO2 one is
implemented so far).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far this is done unconditionally. This already starts some of the
infrastructure for other gases, but so far only O2 is handled.
We also need a pressure scale on the right to make this useful - or we
need to do peek / trough pressure prints like we do for temperature and
depth.
Finally, I think I want to move the plot further down, maybe make the
whole plot area taller if we are plotting partial gas pressures as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the device selector when downloading from a divecomputer add the drive
name that we have been looking for (so far that's only "UEMISSDA") to the
drive letter - this should make it easier for people to figure out why
there is a drive letter offered as an option.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
subsurface_fill_device_list() now goes trough the list of registry
entries in the SERIALCOMM key and adds all present values (such as
COM1, COM2) to a GtkListStore. Once done the function compares
all logic drive label to a static list of known DC labels,
such a 'UEMISSDA', which is the only present one at the moment
and adds any matching drive letters (e.g. C:\, H:\) to the list store
as well.
If no serial ports were added or no matching logical drives were found
the function simply adds a default entry named "COM1".
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
I just tried downloading some duplicate dives I had on my second dive
computer, and it all "just worked" and subsurface merged them for me.
Almost perfectly.
I say "almost", because in merging them, it threw my old weightsystem
data away, due to that not being merged.
Also, it was a perfect merge only because the computers are so similar
that they just line everything up - same water activation logic, same
sample interval, same pretty much everything. So while I know the
sample merging is not really the right thing to do (it was designed to
get the "merge the exact same dive from the same computer" case
right), it worked well enough for this particular case. I'll look at
something better later.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is intended to be unobtrusive, but add more information for people
who aren't satisfied with the numeric value we put inside the plot to mark
local peaks and troughs.
See ticket #9
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added missing translations.
Reviewed and fixed strings marked fuzzy.
Changed date-format to something resembling the usual Dutch notation.
Changed names of months to lowercase.
Changed translation of divemaster from diveinstructor to diveleader.
Fixed some typos.
Signed-off-by: Reinout Hoornweg <reinout@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Turns out we had a data field for visibility as a length unit - but never
used it. I can never guess how much visibility we actually had on a dive -
but I think most everyone can assign a rating between abysmal (zero stars,
"I couldn't read my dive computer even right in front of my mask" - trust
me, I had some of those dives) to amazing ("five stars, I could see farther
than I though possible" - and I had one or two of those, too). So I
changed this to an integer and am re-using the star infrastructure we have
for the overall dive rating.
When displaying this I was dismayed that we are running out of space in
the "Dive Notes" notbook. So I moved this to the "Dive Info" notebook.
This is not consistent and not logical. I think we need to revisit the
notebooks and think about what we want to display where.
While adding the infrastructure to manually enter the visibility I went
ahead and added the ability to manually enter the air temperature as well
(that was one of the things missing in the previous commit).
Fixes#7
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far we don't parse air temperature data via libdivecomputer. Nor are we
set up to allow the user to manually enter it. We can parse it when
downloading from a Uemis Zurich, though.
This feature was suggested via trac.hohndel.org; this commit implements
only part of what is requested there, so I simply reference the ticket
here without closing it.
References ticket #7
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We try to identify devices that are connected and their matching device
names (and mount paths in the case of the Uemis Zurich). Those are
presented as a drop down menu to choose from. The user can still override
this by simply entering a different device / path name.
On Windows this is not functional. How do I find out which drive letter
corresponds to the USB device named "UEMISSDA"? Similarly we need code
that finds serial ports that are present. For now we once again default
to COM3 (so this isn't a step back, but of course it's far from what we
want).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this commit we not only use the getDivelogs command but also the
getDive command for each of the dives that was downloaded. Oddly, that
makes quite a bit of redundant (and at times slightly contradictory) data
available, but also many new things.
We now get weight, suit and notes that were stored with a dive in the
logbook on the divecomputer. There are a ton more data available that we
don't use, yet. For example information about altitude, a decoindex, dive
type and dive activity, other equipment information, etc.
I still need to decide how much of this I want to make available in
Subsurface (and how I want to present this - after all most of this is not
available from other dive computers).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes it easier to debug things in a debugger, but the infrastructure
to send out debug builds where an end user can send in a useful logfile is
still in place.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
divelist.c:
Show a "Yes/No" confirmation dialog when performing delete/remove
operations for dives and trips.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
info.c
- Removed the additional pop-up menu entry "Delete"
- Removed the delete_dive_info() function, which created
the yes/no dialog.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
1) info.c: always check for "amount_selected > 0" before calling
edit_multi_dive_info().
2) populate_popup_cb() should only add the "Edit" and "Delete"
items if there are dives are selected
3) in info_menu_delete_cb() we clear the selection, therefore
we need to set "amount_selected" to 0.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This gives some information on some of the oddities when downloading from
a Uemis Zurich.
Also run a spell checker against the user manual.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the result of a joined effort of several people. Thanks to
Pablo Garcia Castro <freixido@gmail.com>
Matthias Kaehlcke <matthias@kaehlcke.net>
Sergio Schvezov <sergiusens@ieee.org>
Auni Somero <aunims@gmail.com>
Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Signed-off-by: Sergio Schvezov <sergiusens@ieee.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
info.c: extended_dive_info_widget() was still using the
precompiler macros instead of the 'star_strings' buffer,
which may end up being modified if the unicode stars are
not supported on a certain OS (UTF8_FONT_WITH_STARS).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
use SAC everywhere, use 'O₂' instead of 'O2' since we have it in unicode
add missing translations
Signed-off-by: Martin Gysel <me@bearsh.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Spanish translation was previously automatically translated by
Google Translate. This work is an intent on improving upong that
translation and adding to the missing translations to the
untranslated strings.
The poedit tool was used to improve the translation, which reformated
the es_ES.po somewhat.
Signed-off-by: Sergio Schvezov <sergiusens@ieee.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This one breaks with my preference to separate generated changes from
content changes - I wanted to get the new comment next to the
translator-credits text that I added to every .po file. This way the
people who worked on these translations at least get shown in the About
box. But a simple grep on the diff will show you that this is indeed the
only set of changes that I made.
git diff HEAD^ | grep ^+ | grep -v -e^+# -e^+++ -ePOT-Creation
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Mention the specific libdivecomputer version needed (0.2).
References to additional documentation.
Remove distracting info from the flow of the text and add a Credits section at
the end.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Harmonize the translations on the stats tab, let's be consistent on
where we use abbreviations and which one we use.
Signed-off-by: Pierre-Yves Chibon <pingou@pingoured.fr>
Here is what Linus reported:
I think you have made a mistake in trying to translate some of
libdivecomputer.c
Translating some of those things based on locale is *wrong*, because
they are saved in the XML file.
That covers at least the warnings: they'll get translated when you
import them, and then saved to the XML file as that translation, but
now if you start subsurface in another locale, they will not get
translated back.
So translating XML file contents is fundamentally buggy. It just
shouldn't be done.
So all the "translations" for the event handling are buggy, and
generate crap. Please don't do that. Leave them as English.
And of course he is absolutely right. However, instead of not translating
them at all, this commit fixes things a better way - we now mark the
strings for translation but store the original English strings everywhere
(in the in-memory data structure as well as in the XML file). Only when we
actually display something on the screen (in a tooltip or in the filter
dialog) do we actually translate the strings into the native language.
This should address both Linus' issue and the desire to have localized
event texts.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
