...as the usuage is not anymore about a computer but
a momentary dive mode. Rename the end indicator as well.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The dive profile context menu gets rather long with three
additional divome switches that can be selected. This is now changed
so that the additional options are only shown when in CCR
or in PSCR divemode.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
This provides for reading of divemode change events from dive logs
and for writing them to dive logs. This applies to xml and git
divelogs. Divemode change events have the following structure:
event->name = "modechange"
event->value = integer corresponding to enum dive_comp_type (dive.c),
reflecting the type of divemode change (OC, CCR, PSCR, etc).
In the dive log file, the event value is written as a string that
corresponds to each of the enum values, e.g.
<event name='modechange' divemode='OC' />
This xml is also read from the dive log file and translated to an
appropriate value of event->value.
The file diveeventitem.cpp was udated to reflect this new way of
dealing with divemode change events.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
In the old code, we used to reload the whole picture list on drag & drop
to the profile. Instead, only update the drag&dropped picture and repaint
the profile-pictures.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
One close-button object was used for all dive pictures. This seems
like a brittle premature optimization and the pixmap is shared
anyway. Make the button a subobject of the dive picture object.
Change the object-hierarchy to be based on QGraphicsItem instead
of QObject. The QObject here is only used as a kludge to support
signals and properties (the latter are necessary for animations).
Remove a comment, which does not seem to be relevant after this
change.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
1) The connection for the display of CCR-setpoint o2SetpointGasItem
was erroneous, being connected to partialpressuregasSettings. It
is now correctly connected to technicalDetailsSettings.
2) The colour of the setpoint graph is changed from PO2_ALERT (red) to
an orange colour in order to show setpoint in red only when it
exceeds 1.6. This emphasises the visibility of red parts of the
gas pressure graphs whenever gas limits are exceeed.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
fake_dc() used to return a statically allocated dc with statically
allocated samples. This is of course a questionable practice in
the light of multi-threading / resource ownership. Once these
problems were recognized, the parameter "alloc" was added. If set
to true, the function would still return a statically allocated
dc, but heap-allocated samples, which could then be copied in
a different dc.
All in all an ownership nightmare and a recipie for disaster.
The returned static dc was only used as a pointer to the samples
anyway. There are four callers of fake_dc() and they all have access
to a dc-structure without samples. Therefore, change the semantics
of fake_dc() to fill out the passed in dc. If the caller does
not care about the samples, it can simply reset the sample number
to zero after work.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If there is no current dive, the macro current_dc returns NULL.
This led to a null-pointer dereference.
Reported-by: Martin Měřinský <mermar@centrum.cz>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This commit allows plotting the OC-equivalent pO2 graph for PSCR
dives. This happens in both the cases where there is no external
O2-monitoring AND when there is external pO2 monitoring. The
calculations are only done for PSCR dives and is achieved as
follows:
1) Within plot-info create a pressure-t called OC_pO2 in
profile.h and populate this variable with the open-circuit
pO2 values in profile.c.
2) Create a new partialPressureGasItem ocpo2GasItem in
profilewidget2.h and, in profilewidget2.cpp, initialise it
to read the plot-info OC_pO2 values and enable its
display by using the setVisible method. The
diveplotdatamodel was also touched in order to achieve
this.
3) Create a pref button that controls the display of OC-pO2 for SCR dives
4) Change the colour of the OC-pO2 grpah to orange
5) Change the connection of the crr_OC_pO2 signal to be appropriate
6) rename the OC_pO2 attribute to scr_OC-pO2
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Only update those pictures of the DivePictureModel that actually changed.
This will be useful once pictures are loaded incrementally.
To do so, replace the pictures array by an array with stable ids. Before
this commit, not-shown pictures are left out of the pictures array, which
makes the mapping from DivePictureModel-ids to the picture array index
non-trivial.
Replace the QList<DivePictureItem *> by a std::vector<std::unique_ptr<DivePictureItem>>
to ease memory management. Sadly, owing to COW semantics, QVector is incompatible
with QScopedPointer.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Correct a bug in finding the minimum heartrate.
Use the minimum and maximum heartrate value to set min/max and
tic distance for the heartrate axis in the profile.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Replace constructs of the kind
s.toUtf8().data(),
s.toUtf8().constData(),
s.toLocal8Bit().data(),
s.toLocal8Bit.constData() or
qUtf8Printable(s)
by
qPrintable(s).
This is concise, consistent and - in principle - more performant than
the .data() versions.
Sadly, owing to a suboptimal implementation, qPrintable(s) currently
is a pessimization compared to s.toUtf8().data(). A fix is scheduled for
new Qt versions: https://codereview.qt-project.org/#/c/221331/
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This changes the numeric format of many values printed to the UI to
reflect the correct numeric format of the selected locale:
- dot or comma as decimal separator
- comma or dot as thousands separator
In the Qt domain the `L` flag is used case specific mostly
in qthelper.cpp.
Then the helper functions get_xxx_string() are used more consistently.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Use struct temperature_t for temperatures in struct stats_t and
use get_temperature_string() when printing these temperatures for
statistics and HTML export.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Bring one more value plus unit pair which is the pressure value printed
in the profile in accordance with the coding style/UI style rule of
not having a space between value and unit.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Mostly replace "return (expression);" by "return expression;" and one
case of "function((parameter))" by "function(parameter)".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The settingsChanged() function of the profile widget tries to be
clever and tries to prevent not needed replots of the profile.
I'm not sure this is very relevant in the first place as change
of settings are almost instantly, with or without replot. It
appears that replot is always executed when there are
calculated ceilings visible. But without calculated ceilings
a replot is "optimized out". This does, however, introduce dangling
divehandles in PLAN/EDIT and ADD mode of the profile, when
any setting that influences the y-axis is changed.
The fix is trivial. Just force a replot in the PLAN/EDIT and ADD
modes.
Fixes: #1070
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The gas fractions (in %) are now printed at a resolution of 0.1%
and not at 0.01% as previously.
The string in the info box that provides icd data is reformatted
so that the info-box is as narrow as possible.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
The reason for this issue, and fix for this is very similar
to commit b4d37e8ee. Just set both recalculate flags on a mouse
release event, so that the cylinder pressure line is recalculated.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Change the format from (example!)
ICD: ΔHe=-34% ΔN₂=3%<3%
to
ICD: ΔHe=-34% ΔN₂=+3%<+2.8%
Change strings given to translation to less complex ones.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
as otherwise there are warning on the descent.
The ICD line in the info box is generated for all
gas switches with decreasing He content.
Also change the presentation in the info box to align it
with the notes.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Add an exclamation mark in the gas change icons if
the change violates our isobaric counter diffusion
criterium.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
See mentioned GitHub issue for the full issue, and images.
The reason for this weird behavior is the existence of 2 flags in
the profile code: shouldCalculateMaxTime and shouldCalculateMaxDepth.
When exactly following the use case and test data as attached to
the GitHub issue (a very short dive, shorter than most of the
dives in the logbook), the shouldCalculateMaxTime flag never got
back to its true status, causing the the time scale not to adapt
to other dives when just clicking (or selecting) them from the dive
list.
The problem is fixed here by also setting the shouldCalculateMaxTime
flag on manipulating wayppoints in the dive plan.
Fixes: #1039
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
There are ca. 50 constructs of the kind
same_string(s, "")
to test for empty or null strings. Replace them by the new helper
function empty_string().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move divepicturemodel.cpp to the desktop only category and deal
with the (limited) fallout. We, currently, do not support dive
pictures tied to the profile on mobile, so there is no use
including this code.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Do not pull in the DivePlannerPointsModel::instance as this is not
used in the called function. We (currently) do not support deco
computations on mobile, so trying to pull in any deco state from
the planner is futile anyway.
With this uncoupling, 6 more model files are not needed in mobile
any more.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
All the deleted items were added to the scene, which takes
"ownership" (a remarkably fuzzy concept in Qt) of these
objects. In principle, deleting these items is a bug - even
though it is handled gracefully.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
CID 45172
And one non initalized member hAxis could be removed as it is
not used. Surprisingly, Coverity did not see this.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This implements different zoom levels for the dive photos tab as
suggested by Stefan Fuchs <sfuchs@gmx.de> in #898.
The zoom level can be changed using a slider or CTRL+mousewheel.
Zoom levels range from a third of the standard thumbnail size to
thrice the standard thumbnail size.
Thumbnails are cached in maximum resolution and scaled down on
the fly. Because the profile widget took its pictures from the
photo list model, an extra picture copy with a fixed size had
to be introduced.
The UI is still a bit crude.
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Correct way of using indices for rowDDstart and rowDDend.
Reset rowDDstart and rowDDend at beginning of updating dive pictures.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Start a new column a little bit earlier otherwise it will get difficult
to fit a high number of pictures.
Don't put more than ~16 pictures in one column.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
In the dive picture tab show pictures of all selected dive.
But at the same moment take care that in the profile only
pictures from displayed_dive are displayed.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Planning dives is heavy on CPU, so better be sure we only
do it when needed. In particular, when moving around dive
points, we only want a new plan once per move and not three
times (triggered at various points in the chain of events).
This should significantly improve planner snappiness.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
While dragging waypoints around, don't grow the time axis according
to dive duration (including deco stops) as this can explode too
easly resulting in an effectively unresponsive planner. Rather
grow it only (slowly) when a dive handler is moved to the right
10% of the profile.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Some improvements for the dive picture tab and dive pictures in profile:
- Bugfix mouse event in profile: Only Left-click will open picture
- Bugfix mouse events in picture tab:
- Re-enable context menu (Windows bug mainly)
- Re-enable multi select in a nice way
- Only double-left-click will open picture
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Icon aliases were complete mess.
Some icons had alias some didn't.
Named with underscores vs. hyphens vs. camelCase.
Lower vs. upper case.
"ICON" prefix vs. suffix vs. nothing.
With vs. without filename suffix.
Some didn't make sence. Eg. mapwidget-marker-gray
(I can see, it's grey, but what does it represent?)
Some were duplicated, eg warning vs. warning-icon.
Some were name after widget, which is wrong.
Do not reinvent wheel. Use widely used naming scheme
close to Freedesktop Icon Naming Specification. This
will enable usage of common icons from current set in
the future. Thus Subsurface will fit nicely to GUI.
This changes icon aliases to one, easy grep-able style.
Signed-off-by: Martin Měřinský <mermar@centrum.cz>
Icon aliases were inconsistent mess. Underscores vs. hyphens vs. camelCase.
With vs. without filename suffix. Lower vs. upper case. "icon" suffix vs.
prefix vs. nothing. Some were duplicated, eg warning vs. warning-icon. Some
icons didn't have alias at all.
This changes all icon aliases to one, easy grep-able style which complies
to Freedesktop Icon Naming Specification (Guidelines).
Signed-off-by: Martin Měřinský <mermar@centrum.cz>
When toggling the display of the partial pressure graph, the graph was
either not shown correctly or unnecessary ticks were left in the graph.
Calling the settingsChanged() method of the profileYAxis object solves
the problem by initializing the ticks according to the selected graphs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Pass the planner state struct to the profile computation so it can use
deco_time and first ceiling to display VPM-B ceiling.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Fixes an obscure bug, which happened under very specific circumstances.
Precodition: fresh program start and neither of the partial pressure
graphs, nor the heat maps are shown. User clicks on heat map icon.
Bug: The heat map is not shown at the bottom of the graph.
The fix consists in replacing two percentageAxis->setLine() calls
by precentageAxis->animateChangeLine() calls.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Change an unsigned integer to a signed integer in profilewidget2.cpp,
because commit 1f8506c changed the definition of duration_t from
unsigned to signed.
Since this value represents the number of seconds since a dive started,
there is no possible chance of overflow problems.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Size the event item icons in the profile a little bigger. Obviously, how
big is big enhough is upto personal taste, but on Github a screendump
is added to show the new size.
Fixes: #310
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
report_error() now does this automatically. So all these odd places in which we tried
to make sure that we show errors are no longer needed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
current_dc is a macro that determines the dive computer
based on the current dive number. When the planner is started
from an emtpy dive list, the dive number ends up being -1 and
that doesn't produce a valid dive computer. Use the divecomputer
of the displayed_dive instead. This is done via a macro that
can also be used in two other places. Without this patch, the
planner crashed when called on an empty dive list.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
To compute the heatmap value, we need the current gasmix but
the current cylinderindex is no longer available.
Fixes#562
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When deleting dive planner points in the planner we currently sometimes
miss to hide the outdated gas name strings printed close to the profile
legs.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Go back to the old startegy of retrieving the correct end of the dive
plot by looking at the plot data instead of looking at dc->duration.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
When Linus modified the gas handling code six weeks ago he pointed out
that that had broken the tankbar; with this patch we now simply walk the
gas changes of the displayed dive directly and create the tankbar
rectangles from that information.
See #562
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When I massaged the code to do multiple gas pressures in commit e1b880f4
("Profile support for multiple concurrent pressure sensors") some of the
Y offsetting code got cut out as being too specific to the old
o2pressure code.
But I removed a bit too much, leaving the label (gas name) and number
(gas pressure) overlapping.
This should fix it.
If we really care about multiple gas pressure labels overlapping each
other, we'll have to revisit this code, but the old two-gas case didn't
do a very good job either (both that old code - and this new version -
can look very good in particular cases, but there are cases where it
won't work so well).
So we may need to revisit this eventually, but this gets it looking fine
for the normal cases.
Reported-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This finally handles multiple cylinder pressures, both overlapping and
consecutive, and it seems to work on the nasty cases I've thrown at it.
Want to just track five different cylinders all at once, without any
pesky gas switch events? Sure, you can do that. It will show five
different gas pressures for your five cylinders, and they will go down
as you breathe down the cylinders.
I obviously don't have any real data for that case, but I do have a test
file with five actual cylinders that all have samples over the whole
course of the dive. The end result looks messy as hell, but what did
you expect?
HOWEVER.
The only way to do this sanely was
- actually make the "struct plot_info" have all the cylinder pressures
(so no "sensor index and pressure" - every cylinder has a pressure for
every plot info entry)
This obviously makes the plot_info much bigger. We used to have
MAX_CYLINDERS be a fairly generous 8, which seems sane. The planning
code made that 8 be 20. That seems questionable. But whatever.
The good news is that the plot-info should hopefully get freed, and
only be allocated one dive at a time, so the fact that it is big and
nasty shouldn't be a scaling issue, though.
- the "populate_pressure_information()" function had to be rewritten
quite a bit. The good news is that it's actually simpler now, although
I would not go so far as to really call it simple. It's still
complicated and suble, but now it explicitly just does one cylinder at
a time.
It *used* to have this insanely complicated "keep track of the pressure
ranges for every cylinder at once". I just couldn't stand that model
and keep my sanity, so it now just tracks one cylinder at a time, and
doesn't have an array of live data, instead the caller will just call
it for each cylinder.
- get rid of some of our hackier stuff, like the code that populates the
plot_info data code with the currently selected cylinder number, and
clears out any other pressures. That obviously does *not* work when you
may not have a single primary cylinder any more.
Now, the above sounds like all good things. Yeah, it mostly is.
BUT.
There's a few big downsides from the above:
- there's no sane way to do this as a series of small changes.
The change to make the plot_info take an array of cylinder pressures
rather than the sensor+pressure model really isn't amenable to "fix up
one use at a time". When you switch over to the new data structure
model, you have to switch over to the new way of populating the
pressure ranges. The two just go hand in hand.
- Some of our code *depended* on the "sensor+pressure" model. I fixed all
the ones I could sanely fix. There was one particular case that I just
couldn't sanely fix, and I didn't care enough about it to do something
insane.
So the only _known_ breakage is the "TankItem" profile widget. That's
the bar at the bottom of the profile that shows which cylinder is in
use right now. You'd think that would be trivial to fix up, and yes it
would be - I could just use the regular model of
firstcyl = explicit_first_cylinder(dive, dc)
.. then iterate over the gas change events to see the others ..
but the problem with the "TankItem" widget is that it does its own
model, and it has thrown away the dive and the dive computer
information. It just doesn't even know. It only knows what cylinders
there are, and the plot_info. And it just used to look at the sensor
number in the plot_info, and be done with that. That number no longer
exists.
- I have tested it, and I think the code is better, but hey, it's a
fairly large patch to some of the more complex code in our code base.
That "interpolate missing pressure fields" code really isn't pretty. It
may be prettier, but..
Anyway, without further ado, here's the patch. No sign-off yet, because I
do think people should look and comment. But I think the patch is fine,
and I'll fix anythign that anybody can find, *except* for that TankItem
thing that I will refuse to touch. That class is ugly. It needs to have
access to the actual dive.
Note how it actually does remove more lines than it adds, and that's
despite added comments etc. The code really is simpler, but there may be
cases in there that need more work.
Known missing pieces that don't currently take advantage of concurrent
cylinder pressure data:
- the momentary SAC rate coloring for dives will need more work
- dive merging (but we expect to generally normally not merge dive
computers, which is the main source of sensor data)
- actually taking advantage of different sensor data from different
dive computers
But most of all: Testing. Lots and lots of testing to find all the
corner cases.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now that the cylinder pressures are more generalized, we should show
them even for non-CCR dives if we have them. The most notable example
would be having separate pressure transmitters for both cylinders in a
sidemount setup. The code no longer really depends on any CCR logic.
NOTE! This is still preparatory work, in that this is one part of
supporting multiple simulataneous cylinder pressures, but we are still
lacking in other departments (eg properly filling those fields in when a
dive computer exports multiple pressure sensors etc).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a very timid start at making us actually use multiple sensors
without the magical special case for just CCR oxygen tracking.
It mainly does:
- turn the "sample->sensor" index into an array of two indexes, to
match the pressures themselves.
- get rid of dive->{oxygen_cylinder_index,diluent_cylinder_index},
since a CCR dive should now simply set the sample->sensor[] indices
correctly instead.
- in a couple of places, start actually looping over the sensors rather
than special-case the O2 case (although often the small "loops" are
just unrolled, since it's just two cases.
but in many cases we still end up only covering the zero sensor case,
because the CCR O2 sensor code coverage was fairly limited.
It's entirely possible (even likely) that this migth break some existing
case: it tries to be a fairly direct ("stupid") translation of the old
code, but unlike the preparatory patch this does actually does change
some semantics.
For example, right now the git loader code assumes that if the git save
data contains a o2pressure entry, it just hardcodes the O2 sensor index
to 1.
In fact, one issue is going to simply be that our file formats do not
have that multiple sensor format, but instead had very clearly encoded
things as being the CCR O2 pressure sensor.
But this is hopefully close to usable, and I will need feedback (and
maybe test cases) from people who have existing CCR dives with pressure
data.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the planner, the SAC is prescribed, so there is little
use in plotting it (as the color of the cylinder pressure
line). Rather use the color to show the density of breathing
gas.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
There was a bug in the old code due to confusion between minutes
and seconds as the unit of the time axis. But rather than limiting
the time for the last handle in terms of the time axis (which
potentially includes long deco and allowing that for bottom time
quickly leads to dives many many hours long) limit it to 150%
of the previous bottom time.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Nothing really special here. Just a split of the only p02 max threshold into
a min threshold and max threshold, and the adaptation of the UI. Change of
translatable strings included.
ref: https://github.com/Subsurface-divelog/subsurface/issues/259
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
For CCR dives we want to display the setpoint and pO2 information,
due to the limited screensize we have to remove the temperature graph or
the view will be to cluttered.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Wfloat-conversion enabled for C++ part of the code
Fix warnings raised by the flag using lrint
Original issue reported on the mailing list:
The ascent/descent rates are sometimes not what is expected.
E.g. setting the ascent rate to 10m/min results in an actual
ascent rate of 9m/min.
This is due to truncating the ascent rate preference,
then effectively rounding up the time to reach each stop to 2s intervals.
The result being that setting the ascent rate to 10m/min
results in 20s to ascend 3m (9m/min), when it should be exactly 18s.
Reported-by: John Smith <noseygit@hotmail.com>
Reported-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
... for consistency, while we are at it.
There are still some internal depth variables which are ints
somebody might take a go at those.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Using gcc option "-Wfloat-conversion" is useful to catch
potential conversion errors (where lrint should be used).
rint returns double and still raises the same warning,
this is why this change updates all rint calls to lrint.
In few places, where input type is a float, corresponding
lrinf is used.
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
"SP change" info format in info box: Added/changed formating and add "bar" unit.
"waypoint above ceiling" event in info box: Added formating, depth conversation to ft/m and depth unit.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Enable translation for a few additional internal dive events.
Ensure that all event names in datatrak.c are collected for translation.
Ensure that for gaschange in profile info box the "cyl." string is also translated.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Add the tankbar to the profile and change the relative positions of the depth
and temperature curves to minimize overlap.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
It's not too clever to give 0 a special meaning (as here:
use same gas as for previous leg) when 0 is a legitimate
value.
This should solve Willem's gas disappearance problem when
reediting a dive in the planner.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When moving the last handle of a dive (in the planner, in dive add, or
when editing a dive), we rescaled the time axis whenever our idea of the
maximum duration that we should show changed. That lead to the odd
situation that you couldn't get to certain dive durations with the
visual editor (e.g. 64 minutes) because just as you approach that time
the scale changes and the dive duration jumps past the desired value.
Fixes issue #174
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
