We shouldn't allow the user to change the location when we are probing
the web for the correct places if we are updating an old file from
Subsurface. This makes use of a pleasant spinner that works beautifully.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
'enable' and 'disable' is too generic, and we are only
blocking the geolocation edit.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The maintab should be disabled when the geolocation thread is
running - but if you changed the dive, it would reenabled it.
(actually this should be only on the location widget, I'll send
another path later)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I don't know what happened to me, I connected to some signals that didn't
exist at all.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So just like tags do "differential editing". Figure out what (or in this
case, who) was added / removed from the displayed dive and do the same for
all other selected dives.
This does seem a bit over top for divemaster, but this is more consistent
and therefore should make more sense to the user - assuming we ever have
one who runs into this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old behavior was kind of crude. Just smack the tags that were on the
displayed dive on all selected dives.
This seems to make more sense. We figure out which tags were added to the
displayed dive and add them to all selected dives. And we remove all tags
that were removed from the displayed dive from all selected dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we delete a cylinder the gas changes in that dive may have to be
adjusted. We didn't do this at all in the past. With this commit we should
be doing this right for a single dive that is being edited.
This does NOT handle multiple dives being edited at the same time (or more
specifically - if you have multiple dives selected and delete a cylinder,
the dives that had the same set of cylinders (other than the displayed
dive) will get that particular cylinder deleted, but won't have their gas
change events (and sensor data in the samples) adapted.
Possibly we should simply prohibit deleting cylinders when more than one
dive are selected.
See #834
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Oops, that was embarrassing. Just setting it on displayed_dive doesn't
gain us anything if it isn't transferred to the selected dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Once a manually added dive is part of a trip and this trip
is edited, applying the modifications leaves the dive profile
in edit mode (e.g. points can be dragged and gas swapping can
be applied).
The issue can be viewed from another angle. Why enable
profile edits of a manually added dive which is in a trip,
while the trip is being edited in the first place?
If there are more than one manually added dives in said trip
we are enabled to edit one of the dive but probably
it's not intended to modify all manually added dives after the
changes are applied for the trip.
This patch disables the functionality in question and it also...
Fixes#864
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The char pointer was out of scope by the time we created the dive site.
Also remove the misleading comment above - it really makes sense to do
nothing in that function.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code used to trigger the edit mode a long time ago
since now I'm re-reading the code to implement the
same stuff on the Location edit mode, I realized that
this is not needed anymore.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we accept a change on the dive site management screen, it needs to be
reflected on the Dive notes tab right away.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It seems to make sense to only have them on the dive site screen. For the
main UI they were redundant (we have the map) and not all that useful. The
only time people would want them is if they wanted to manually add GPS
coordinates for a dive, but that should now be done via the dive site UI.
There are a couple of FIXMEs in the code and a few code blocks that have
been commented out as they will be needed in one form or another once this
GPS handling is done on the dive site UI, which right now it is NOT.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the start of the preparations to edit the dive site,
passing a uuid so we can retrieve it later.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make it possible to cancel or accept the location edit and
get back to the mainwindow default state.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Clicking on the 'Manage' button now brings you to the widget to manage it.
Nothing has been added on it yet.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the last patch in the series of clearing up the
mainwindo.ui. Now to bugfixing.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now it's started from mainwindo.cpp and it's part of the
new states
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's now set up from the mainwindow.cpp file.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If current_dive and displayed_dive still have the same tags then we
shouldn't touch the tags of other selected dives.
Fixes#826
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Without this patch, the user effectively cannot change the dive mode as
any change is overwritten by replot copying current_dive over
displayed_dive. The way out is not to call replot but only update the deco
ceiling directly.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The maintab view should be consistent; some fields just go to edit mode
whenever they acquire focus and most of them wait till their values are
changed.
Change the dive notes field to be consistent with the other fields and
only enter edit mode if its value is changed.
[Dirk Hohndel: changed to use same_string()]
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This hides the whole QWidget with the share-to-fb button in it. This
lets the Notes field expand to the full width.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead be consistent with other parts of the code and put us in editing
mode so the user can accept / reject the change.
See #800Fixes#801
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Lots and lots and lots of header files were being included without being
needed. This attempts to clean some of that crud up.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Update O2 metabolsim rate and adopt default gas switch depths to
pSCR oxygen drop.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will crash if for some reason current_dive is invalid.
And in general, when displaying information, we want to use the correct dc
in the displayed_dive, not the current_dc, which references the
current_dive...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When changing to a CCR dive, add a setpoint change to the default setpoint
at the beginning of the dive. Otherwise add an explicit setpoint change to 0
.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The accepting mode variable must be initialized to false to allow
editing of dive data.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On Ubuntu 14.04 the edit mode does not exit successfully when applying
the changes. It instead jumps back to edit mode (even though hiding the
option to apply/discard changes again). So let's just have a flag to
prevent faulty behavior.
Fixes#786
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was silly; if we rely on this to be zero to indicate no change then
we better zero it out when we start editing.
Fixes#805
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We zero out the displayedTrip and only copy changed data into it; so a
NULL value is not deleted text, it means there was no change.
Fixes#805
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now that we set the margins everywhere, the manual corrections here aren't
needed. At the same time, the spacing for the labels looks better if it is
a tiny bit more generous.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
