The Stinger stores the alarm time in seconds, instead of minutes as the
Vyper does it. This corrects for that.
Reported-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The successful message was emitted in a some what older way then the
other messages so it was always emitted, even on error.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a bit ugly fix to make sure the right error message reaches the
user in case of being unable to open the device.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Data read from a divecomputer is moved inside the divecomputer tag
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This tries to grab the used cylinders when in open circuit mode.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Shearwater describes the current mode with tag currentCircuitSetting,
thus we should record the ppO2 only when in CCR mode.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the decision if a dive segment should lead to a line in the
diveplan, we need to differentiate between the lastdepth (the
depth of the last dp to tell if we are currently stopping) and
the last depth that we printed a line for (needed for gaschange
lines). Without this patch, no stops without gas changes were
listed anymore in the diveplan.
Like the last patch for the diveplan: I hope this time I got this
logic right.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Update to user manual text, including Cylinder bar at bottom of profile as well as
Extra Data tab.
A few smaller sentence-level updates scattered throughout the text
New pictures.
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
799e22ea0c3f20 in libgit2 renamed a function, which
breaks our build. To fix that we check the current version
and if the USE_LIBGIT21_API definition was used.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This changes the code so we include all the cylinders from a previous
dive when we re-plain a dive.
Otherwise we would have a hole in the cylinders table when we plan a
dive based on a dive where we have unused cylinders, and it makes more
sense to copy all of them rather than not.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use our the decopo2 from preferences for mod/switchdepth calculations
when re-planning a dive or planning a dive based on a previous dive.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The implementation of import for DM5 removed the profileBlob from SQL
query, thus breaking the backward compatibility on import of old dives.
Need to have bot profile and sample blobs within the query...
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A profiler session in the planner shows that for deep long dives
a significant amount of CPU time is spent in populate_pressure_information()
which interpolates the cylinder pressure graphs.
This patch introduces a "fast" flag for the replot of the profile
which is active while the mouse button is still pressed and that
suppresses this calculation.
In the future, this flag could be used for other responsiveness tunings
of the plot.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The CSV/TXT import is working well now, the XML file is just causing
confusion.
Suggested-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
"Converted" DM4 logs are not actually converted, only the database
structure is updated. According to Rainer we should be able to read the
dive profile from the old format in this case.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If DM4 log file is converted to DM5, the sampleBlob is empty.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Oops, I thought I had done that but that was flat out wrong.
Now the source upload shrinks from over 70MB to around 26MB. Much better.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These files knowingly (one might say, intentionally) violate the spirit
and letter of the Debian / Ubuntu packaging rules. They are intended to be
able to create our own packages that include their own libdivecomputer,
libgit2 and (later) libmarble. Especially for daily builds this is WAY
easier than fighting with whatever may be the current version of these
packages in Ubuntu (especially since this allows us to use our private
libdivecomputer branch).
This assumes that the user runs the make-package.sh script from a
directory below which we have
subsurface/ <- Subsurface checked out git tree
subsurface/libdivecomputer <- desired libdivecomputer sources
subsurface/libgit2 <- desired libgit2 source
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The hw_ostc_device_eeprom_read / hw_ostc_device_eeprom_write functions
have bin in libdivecomputer since v0.1.0, so there was an error when the
read settings part ended up behind ifdef's.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fixing incorrect variable scope. (I do not really see any functional
differences on Firefox, but better declare the variable before the
loop.)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fixes a warning. The function is only used if
DC_VERSION_CHECK(0, 5, 0) is defined.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a context menu entry to add a setpoint change
event. In particular, this can be used to turn a logged dive into
a CCR dive.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to compile anything on Mac you need to have XCode and its command
line tools.
After an OSX update (as I just did to Yosemite) the command line tools
have to be reinstalled. Otherwise there are strange error message about
missing header files for libusb2 (even though that is still installed
via homebrew).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some instructions how building libdivecomputer differs from Subsurface
build. And mention to copy libigt2 over to other repository if needed.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows more space between the input fields in the dialog.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The backend needs to convert the firmware and serial information into a
sane string - Subsurface shouldn't try to do this by itself.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch privides for writing CCR dive log parameters to a git
repository and for reading the data back from a git repository.
This involves writing and reading the following members of the
structures of sample:
o2sensor[3]
o2cylinderpressure
and dc->no_o2sensors.
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Date and duration formats are not necessarily self explanatory so adding
tooltips to explain the expected format.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
