These properties are not needed anymore, because the full text search
was decoupled from the DiveObjectHelper.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
1) The full text search was looping over the DiveListModel when
it could simply loop over the core model. Do that instead.
2) Don't generate a DiveObjectHelper to do a full text search.
Currently this is harmless as the DiveObjectHelper is only
a disguised "dive *". But from a conceptual point of view,
it represents the full representation of a dive and we don't
want to generate that in a tight loop.
This will help in
1) Making the DiveObjectHelper a non-reference object.
2) Moving fulltext search to the core and thus making it available
to desktop and more performant.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the previous commit, we just continued downloading dives when
download errors happened, but that also makes problems a lot easier to
miss because now they are possibly just transient reports in the
progress bar that get overwritten by the next dive being downloaded.
So this turns a number of these errors from using 'dev_info()' to use a
new 'download_error()' reporting model, which then uses the generic
subsurface error reporting functionality that is sticky and can handle
multiple errors.
It also adds a few 'dev_info()' calls for actual informational messages
about the state of downloading, although the new ones will probably
mainly end up happening before the progress bar is actually shown. But
it might improve on some of the progress messages.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Charbonnier reported a problem downloading the dives from his
OSTC2, and Jef debugged the libdivecomputer log and says:
"Your ostc has 75 dives, but subsurface downloaded only one, and then
stopped the download. That's because that first dive appears to be
corrupt and fails to parse:
ERROR: Buffer overflow detected! [in /win/subsurface/libdivecomputer/src/hw_ostc_parser.c:981 (hw_ostc_parser_samples_foreach)]
Subsurface (incorrectly) considers that a fatal error and stops the
entire download. From a user point of view, it would be much better to
ignore the problematic dive, and continue downloading the remaining"
Subsurface used to just stop downloading if there were parsing errors,
but Jef further says:
"How parser errors are handled is up to the application. Aborting the
download is probably the worst option here. If a dive fails to parse
(because the dive data is corrupt, the parser contains a bug, etc),
that does not necessary mean the remaining dives can't be downloaded"
so let's change the logic to just continue downloading, and hope other
dives work better.
We might want to do better error reporting, right now the errors tend to
just cause "dev_info()" reports, which just set the progress bar text.
So you'll see it in the progress bar as it happens, but it won't get
really ever noted as an error, and it's easy to miss.
But that error reporting is a separate issue, and this just does the
"continue to the next dive" part.
Reported-by: Eric Charbonnier <eric.charbonnier69@gmail.com>
Suggested-by: Jef Driesen <jef@libdivecomputer.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It seems crazy to simply assume that the later code can successfully
untangle the various states that the credentials can be in - let's just
stay on the credentials enrty page until we have verified credentials.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should do the right thing in the various situations of correct &
verified credentials, credentials needing PIN verification, invalid
email/password combination, incorrect PIN, correct PIN.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the default font size is big enough to leave us fewer than 21 grid
units per row, shrink the grid unit.
In order for this to create consistent results, we need to reduce the
default column width to 21 grid units as well. And with that change, the
columnWidth property becomes obsolete.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When building and installing Qt5WebKitWidgets to a different path than
your other qt libraries, you need to actually look for it and find it to
be able to use it.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
This way we can view the html generated from a print template, for
debugging, validation or printing via your favorite browser.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
This balances the tags to a equal amount of start and end tags in the
planner notes html.
This also breaks it up with new-lines, so its a bit easier on the eyes,
and gives a validator the chance to point out on which line a error is.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
The output it spits out can be copy-pasted into a html validator like:
https://validator.w3.org/nu/#textarea
Signed-off-by: Anton Lundin <glance@acc.umu.se>
When gas switching only on stops is selected, the notes
showed an extra line at the not realized stop depth. This
eliminates it. It also makes sure there are no 0 second
spurious entries. And gas switching takes more than zero
time (otherwise we would have to print a line of zero
duration for at the gas switch depth).
Reported-by: tormento <turment@gmail.com>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
That was used to store the disclaimer of the last plan. The
functionality was disfunctional for a long time, therefore
remove the variable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The setting of the disclaimer variable was removed inadvertently
some time ago, which removed the disclaimer from the printed plan.
Instead, introduce a function that returns the disclaimer with
the current deco mode. Use that function to generate the dive
notes and for printing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There used to be code to remove the old planner notes when replanning
a dive. It used a global variable and seemed rather brittle. Moreover,
the place that set the global variable was inadvertently removed.
Therefore has been effectively dead code.
Reimplement the functionality, but be more robust by considering
that the deco-type may have changed: Split the translated disclaimer
string in two parts, before and after the "%s" place-holder.
Search for these two parts. Remove the disclaimer and everything
after the disclaimer.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This just merges with Jef's branch, which should hopefully fix the Mares
BLUELINK Pro connection issues. Knock wood - I can no longer test it
due to lack of hardware.
It also improves on the Ratio iDive cylinder pressure transmitter support.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The application could be crashed by
1) Create dive site
2) Edit dive site
3) Undo until dive site is removed
4) Continue editing now non-existing dive site
Therefore, hook into the dive-site-deleted signal and if the
currently edited dive site is deleted, close the widget.
When closing the widget, make sure that the potentially
dangling pointer is reset to zero so that there is no
other potential use-after-free bug.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is the alternative MapWidget::reload() function, which
centers on the selected dive-site.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For historic reasons MapWidget::repopulateLabels() was called
in LocationInformationWidget::acceptChanges(). This should not
be necessary anymore, as this is done when entering/exiting
dive-site-mode.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The LocationInformationWidget repopulated the map labels if the name
or location of a site changed. This is unnecessary because the
MapLocationModel catches these signals itself. Remove these calls.
As an added bonus, calling repopulateLabels() in QML context leads
to crashes later on. Therefore this should fix at least one
crash condition when dragging a flag on the map while the
dive-site-edit-tab is shown.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
"Roles" is a C-style enum (i.e. not C++-style enum class). Since that
means that the names spill into the outer namespace, the names
themselves are prefixed with "Role". Nevertheless the code qualified
the names with "Roles::". This is redundant and unnecessary.
Remove this redundancy to show that we understand how the language
works.
Note: we could also transform the enum into an enum class and remove
the "Role" prefix from the names. That would arguably be "cleaner",
but then the enum doesn't auto-convert to/from int, but Qt uses int
to pass the roles to functions. So let's go the simple way that
avoids casting.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since this is no longer a Q_METATYPE, nobody will try to
default construct this object. Remove the default constructor
and guarantee that there will be no null divesite.
Of course, the lack of default constructor means that the
default argument to the "selected" member variable should
be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Let's face it: this is a value type. No point in having Java-style
getters and setters. Replace by plain old and boring member variables.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Nobody was listening for that signal. Remove it. This, quite
obviously, makse the setCoordinateNoEmit() function redundant.
Merge with setCoordinateNoEmit().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We never dish out an object of this type to QML. It is unclear how
Q_PROPERTIEs could be of any use.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Recently we changed the MapLocationModel-items to store whether
they are selected. Thus, we can directly export an isSelected
flag instead of calling a function taking a dive-site argument.
1) This makes the QML easier to read.
2) This avoids passing pointers through QML which has caused
us lots of pain.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To connect a model to QML, one is supposed to provide a
QHash<int, QByteArray> MapLocationModel::roleNames()
function that returns a role -> attribute-name hash.
That was realized by filling the hash in the constructor,
storing it as a member variable, using static strings that
were declared in the class-definition and defined in the
translation unit.
Adding a new role was a pain and the whole thing was totally
pointless as the attribute names were used nowhere else and
the roleNames() function is called only once.
Simply do, what we do everywhere else: initialize the hash
in the roleNames() function and use normal string literals.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When editing the dive site, for certain fields a divesChanged signal
was emitted so that the dive-list can be updated.
Arguably it is wrong to decide which fields are relevant to the
dive list in the undo-command code. Therefore, let the list
catch the dive-site-edited signal and decide itself.
But the actual reason for this commit is that if the dive-site
field of a dive changes, we might have to reload the dive-location-model
because suddenly a new dive site appears. Now if this is done
in QML context on some Qt version (notably 5.9) we get crashes
later on. But that can happen if the user moves a flag. So in that
case only send a diveSiteChanged signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since changing the highlighting to use the selected dive, dive
sites with no dive were never highlighted in dive site mode.
Obviously, because there was no dive to be selected.
Therefore special-case all dive-site selection code to recognize
when we are in dive site mode.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since selection change doesn't to a full map reload, we have to
reload the map on filter changes, since the shown dive sites change.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This one-liner was called in only one place from the same class.
Just fold it into the caller.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since not fully reloading the map on selection change,
the selected sites were not moved to the top. Not calculating
the z-value in QML, but making it a simple model property
helps.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Owing to the recent changes, when the selection flag in the
MapLocationModel was not updated correctly when the user
manually selected the dive. Do that before raising the
divesSelected signal in DiveListView::selectionChanged()
because that will cause the MainWindow to repaint the flags.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When clicking a dive site on the map, the QML code would set
the selected dive site, but then all dives of dive sites in
the vicinity were set. But still only the clicked-on dive site
was shown.
Therefore, don't set the list of selected dive sites in QML,
but later in DiveListView::selectDives(), where we know all
the dives that were selected.
This, again, gives nasty entanglement of diverse widgets and
models.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When changing the selection the MapLocationModel was reset.
This lead to crashes on Qt-5.9 which are due to QML accessing
data that was freed during model reset. This putative Qt bug
doesn't happen on newer Qt versions. At least Qt-5.12 is known
to work.
Instead of fighting the bug, let's simply not reset the model
but send a dataChanged() for every element of the MapLocationModel.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In MainWindow::refreshDisplay() with doRecreateDiveList=true
the map was reset before the dive list was recreated. This
makes no sense and only worked because the map was reloaded
again when a dive in the list was selected.
Reload the map after recreating the dive list.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
