Unfortunately Coverity doesn't understand that most Qt data
structures are copy-on-write. It's a mis-feature of Qt, but
it is the way it is. Thus, passing by value is not an issue.
Out of ca. 25 warnings only two were legit. Let's silence
the others by either std::move()ing or passing by reference,
as would be idiomatic C++, which Qt is not.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Load the dive computer list in the 'Change Settings on Dive Computer'
dialog dynamically.
Also incorporate suggestions from
https://github.com/subsurface/subsurface/pull/3925#issuecomment-1595784076.
Suggested-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Michael Keller <github@ike.ch>
Use the dive computer / device information that was persisted when
previously downloading dives or configuring the dive computer in the
dive computer configuration dialog.
Also rename 'Connect with bluetooth' and 'Cancel' buttons in the dialog
to make them more consistent with what they do.
Signed-off-by: Michael Keller <github@ike.ch>
In order to support development of the open source firmware of the
OSTC4.
Requires changes in libdivecomputer.
Signed-off-by: Michael Keller <github@ike.ch>
Clarified the message that is shown when a newer dive computer firmware
version is available, informing the user that
using an older firmware version may result in problems when using
Subsurface, as discussed in #3568.
This is currently only supported for Heinrichs-Weikamp dive computers.
Signed-off-by: Michael Keller <github@ike.ch>
The only things in display.h were profile related, so the
split between these two files is not comprehensible.
In fact profile.h includes display.h, because it needs the
struct defined therein. Let's just merge these two files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This tries to make our fingerprinting code work better, by avoiding
using the "deviceid" field that has always been unreliable because we've
calculated it multiple different ways, and even for the same version of
subsurface, it ends up changing in the middle (ie we calculate one value
initially, then re-calculate it when we have a proper serial number
string).
So instead, the fingerprinting code will look up and save the
fingerprint file using purely "stable" information that is available
early during the download:
- the device model name (which is a string with vendor and product name
separated by a space)
- the DC_EVENT_DEVINFO 32-bit 'serial' number (which is not necessarily
a real serial number at all, but hopefully at least a unique number
for the particular product)
but because the model name is not necessarily a good filename (think
slashes and other possibly invalid characters), we hash that model name
and use the resulting hex number in the fingerprint file name.
This way the fingerprint file is unambiguous at load and save time, and
depends purely on libdivecomputer data.
But because we also need to verify that we have the actual _dive_
associated with that fingerprint, we also need to save the final
deviceid and diveid when saving the fingerprint file, so that when we
load it again we can look up the dive and verify that we have it before
we use the fingerprint data.
To do that, the fingerprint file itself contains not just the
fingerprint data from libdivecomputer, but the last 8 bytes of the file
are the (subsurface) deviceid and the diveid of the dive that is
associated with the fingerprint.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The pointer-to-member-function version is compile-time checked
and therefore less risky with respect to refactoring.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In OstcFirmwareCheck::saveOstcFirmware() we find the connect() call
connect(dialog, SIGNAL(finished(int)), config, SLOT(dc_close()));
whereby "config" is of the type "ConfigureDiveComputer".
However, the function signature of ConfigureDiveComputer::dc_close
reads as
void dc_close(device_data_t *data);
and indeed "data" is accessed inside the function. I don't understand
how this doesn't crash, but clearly something is amiss.
Let's remove that connect statement.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This fixes a rather subtle bug.
In btdiscovery.cpp we are detecting dive computers based on their BT name and
are setting up product+vendor as the key for that lookup. QMap always uses case
sensitive comparisons and a tiny inconsistency snuck into our code.
libdivecomputer names for the Aqualung dive computers i200C / i300C / i550C end
in an upper case C (as matches the official branding), but in btdiscovery.cpp
we have those names with lower case c. And therefore didn't recognize these
dive computers.
Obviously this is easy to fix by fixing those three strings, but I decided that
it was silly to set ourselves up for similar oversights in the future. So
instead I switched the matching of the descriptor to simply be allways all
lower case.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This removes some special-case code for Uemis, replacing it with simply
passing in the device transport information.
This makes device enumeration work for the Garmin Descent (if it is
listed by libdivecomputer as a USB storage device, that is).
I don't actually do any of the libdivecomputer parsing yet, and only
have a stub for the Garmin Descent, but now the directory selection
works with that stub. The actual download obviously does not.
[Dirk Hohndel: removed obsolete FIXME from code]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also show a new firmware notice for a HW OSTC Plus. This appeared
to be broken (as can be verified on the current master from today,
as HW just released version 2.98 of the firmware).
Notice that there is some confusion in both Subsurface and
Libdivecomputer with respect to types of OSTCs. Physcically,
there exist 2 type of OSTC3's. The first edition with
only DC_TRANSPORT_SERIAL (and an USB connector), and a second
version that lacks the connector but supports both BT and BLE.
Confusingly, the second version is marked OSTC3 on the device,
but the user needs to select OSTC Plus (which is basically a 3rd
version of the OSTC3, combined with a successor of the OSTC Sport)
to download dives using BT/BLE.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
remove use of SettingsObjectWrapper::
remove include of SettingsObjectWrapper.h
use qPrefFoo:: for setters and getters
replace prefs.foo with qPrefXYZ::foo() where feasible
(this expands to the same code, but gives us more control
over the variable).
Signed-off-by: Jan Iversen <jani@apache.org>
remove DiveComputer from SettingsObjectWrapper and reference qPrefDiveComputer
update files using SettingsObjectWrapper/DiveComputer to use qPrefDiveComputer
this activated qPrefDiveComputer and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
When we introduced the whole check for supported transports code, no one
noticed that it broke configuring all ostc's over bluetooth.
The configure code just used a placeholder model of OSTC 3 to get the
right backend code. With the new supported transports model it errored
out if you where trying to connect to a bluetooth enabled device, just
because the original OSTC 3's wasn't bluetooth enabled.
This switches the placeholder model over to a OSTC Plus which is both
bluetooth, serial and ble capable, so the code works again.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
helpers.h included qthelper.h and all functions declared in helpers.h
were defined in qthelper.h. Therefore fold the former into the latter,
since the split seems completely arbitrary.
While doing so, change the return-type of get_dc_nichname from
"const QString" to "QString".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In firmware version 2.97 the setting 0x38, SETPOINT FALLBACK, has bin
obsoleted and we get a error when trying to write to it.
This removes this setting.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
strdup(qPrintable(s)) and copy_string(qPrintable(s)) were such common
occurrences that they seem worthy of a short helper-function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace constructs of the kind
s.toUtf8().data(),
s.toUtf8().constData(),
s.toLocal8Bit().data(),
s.toLocal8Bit.constData() or
qUtf8Printable(s)
by
qPrintable(s).
This is concise, consistent and - in principle - more performant than
the .data() versions.
Sadly, owing to a suboptimal implementation, qPrintable(s) currently
is a pessimization compared to s.toUtf8().data(). A fix is scheduled for
new Qt versions: https://codereview.qt-project.org/#/c/221331/
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the configure dive computer dialog change the order of the DCs
(all HW first, then Suunto) and correct the names of some HW DCs
(make them the same as in the "download from DC selection list").
Plus added the OSTC Plus to the list of supported DC.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Currently, on Linux, after selecting a Bluetooth device the name of the
device is shown. On reopening the download dialog, on the other hand,
the address is shown. In the device selection dialog both are shown.
This patch changes the download dialog such that both, name and address,
are shown. The bulk of the patch introduces the name of the device in
the preferences and DCDeviceData. It has to be noted that DCDeviceData
is an encapsulation of the libdivecomputer device_data_t. Nevertheless,
the new Bluetooth-name field is, at the moment, not passed through to
libdivecomputer.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Correct spelling and typos in file filters.
Unify and translate file filter names.
Don't pass a file filter to a directory open dialog - not needed.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
QMap::operator[] creates a new default constructed entry in the map
if no entry with the given key exists. While not problematic (since
typically nullptrs are inserted) this is usually not what you want
for read access.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Way back in time this code was copied from downloadfromdcthread, so
de-duplicate and call that code instead.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Connect up all the settings that are the same, and remove those who are
not, and correct those who only are minor differences.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
This is mostly copy-paste from the ostc3 case, but there are some minor
differences. Some minor things have different meaning, and there's a
slightly different command set, but I couldn't figure out a sane way of
joining them.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Wfloat-conversion enabled for C++ part of the code
Fix warnings raised by the flag using lrint
Original issue reported on the mailing list:
The ascent/descent rates are sometimes not what is expected.
E.g. setting the ascent rate to 10m/min results in an actual
ascent rate of 9m/min.
This is due to truncating the ascent rate preference,
then effectively rounding up the time to reach each stop to 2s intervals.
The result being that setting the ascent rate to 10m/min
results in 20s to ascend 3m (9m/min), when it should be exactly 18s.
Reported-by: John Smith <noseygit@hotmail.com>
Reported-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
This is needed in the altitude pressure conversion as there
negative altitudes are possible (for diving in the netherlands
or the Dead Sea).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This adds support for notifying Ostc 4 users about new firmwares when
they download dives from their computers, gives them the option to
trigger the upgrade flow.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Use more general wording about bluetooth preparations, because nowadays
there are more computers than the Ostc Sport which use bluetooth.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
