We were using the QGraphicsScene machinery to zoom into the
plot. This not only zoomed into the dive, but into the whole
thing. In general, one couldn't see the axes anymore.
Instead, adjust the range of the time-axis according to the
zoom-level and position.
Of course, the code isn't adapted to that and the result
is comical. The chart features will have to be fixed
one-by-one. Oh joy.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, the zoomLevel is reset for every plotDive() call,
because the zooming is done via the QGraphicsScene. However,
this does not work well (e.g. axes are likewise zoomed) and
in the future a change of the zoom level will cause a replot.
Thus, remove the zoom-reset in plotDive() and do it explicitly
when switching dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a constant, no point in keeping it as a member variable.
Contains removal of a pointless #ifdef (guarding against mobile,
but code not compiled on mobile), a typo-fix in a comment and
replacement of Qt's idiosyncratic qreal by double.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is bike-shedding: Instead of two setMinimum()/setMaximum()
calls, use a single setBounds() call. A few axes (notably depth
and time) always have a 0 as lower bound. However, this will
change once there is a proper zooming functionality.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The placement of the axes was done independently of the
plotting, e.g. when settings changed. Presumably,
for performance reasons. However, since the axes may
depend on whether a dive has heart-rate data or not,
this simply is not viable. To make this work, one
would have to remember whether the previous dive
showed the heart-rate, etc. Not worth it - always
reposition the axes. It should not matte performance-
wise.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The chart items were laid out in relative terms with respect
to a fixed scene size (100.0, 100.0). This simply does not
cut it when resizing the chart. Why should the axes always
occupy the same fraction of the chart independent of the size.
Moreover, this led to basically unmaintainable code.
Resize the scene according to the viewport and do
absolute placement of the items. This breaks the layout,
but at least now we have a chance to fix things
somewhat reasonably.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The profile would reload for many settings-changed signals.
It didn't listen to the deco-info-changed signal, because
that had no effect (which seems to be a bug).
Since this flag should indicate whether the deco-info is
shown and therefore a change should replot the profile,
let's listen to the corresponding signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The printFontScale is used to scale up fonts (and icons) when
rendering to high-DPI devices. With absolute scaling, this
will also be used to scale the size of different chart
regions, line thickness, etc. Therefore, give it an more
appropriate name. "Device pixel ratio", which is a well
established term, seems to appropriately describe the
concept.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The print mode is passed on construction, not retroactively.
This function thus became unused.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of using the interactive ProfileWidget2, just
use the ProfileScene to render the profile for printing,
export and mobile. One layer (QWidget) less.
This removes all the kludges for handling DPR on mobile.
Thus, the rendering will now be off and have to be fixed
by redoing the scaling code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Setting the profile and grayscale mode of the profile via
functions is from a time when the same profile widget was
used for printing and the UI. It is simpler to set the mode
when constructing the object and not deal with changes.
To prepare for this scenario, take the flag at construction
time. This still keeps the callers as-is. These will be
adapted later.
Logically, then the printFlag also has to be set in
DiveCartesianAxis at construction time.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The cartesian axes use animSpeed to animate changes. Instead
of passing down the value to the respective functions, the
speed was stored in the ProfileScene and the axes would
access it there. Very messy. Let's just pass down the speed.
There still are back-references from the axes to the scene,
notably to place labels "outside" of the scene. Let's try
to remove them later.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This finalizes the split between interactive (ProfileWidget2)
and non-interactive (ProfileScene) parts of the profile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the ProfileScene does the actual rendering, it needs
access to the "printMode", "isGrayScale" and "fontPrintScale"
variables. Move them down from ProfileView to ProfileScene.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was moved to the desktop version. Enter the profile in
the constructor. Somewhat surprisingly, this seems to work.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since using separate profile-instances for print/export,
we never exit print mode. Therefore, the mode parameter
can be removed. This is a preparatory commit for passing
the printMode at construction time.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Part of separating the static (for printing, export) and
dynamic (UI) parts of the profile. This is still quite messy
with many direct accesses from the ProfileWidget.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This simply subclasses QGraphicsScene and is used as
a drop-in replacement. The plan is to step-by-step
move rendering functions there until the non-interactive
code can only use the scene and doesn't have to use
the QGraphicsView. This will hopefully remove quite
some conditional code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The font print scale is now set once on construction and this
function can therefore be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of intializing the text fields and then changing the
font scale via signal-rigmarole, pass down the font-scale
at construction time.
Since the fontPrintScale is only set in print mode, we also
can access it directly instead of testing for printMode.
Since the DiveTextItem is not updated using signals anymore,
the connected flag can be removed.
The commit is larger than I had hoped for, but this makes
things ultimately less brittle.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Not having to readjust the scale on-demand will make the
code distinctly simpler. Let's just pass it once.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The alternative spelling "visibile" made searching for this
function very annoying. That makes removing it even more
satisfying.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Very annoyingly, to render the profile for printing / export,
the profile still had to be show()n, thus requiring a parent
window.
Analysis of qmlprofile.c showed that this was due to the
transformation matrix not being properly set up on non-show()n
scenes.
Instead, we can simply render via the QGraphicsScene
(circumventing the QGraphicsView).
The code was factored out into the ProfileWidget2::draw()
function. This will hopefully make it easier to change
the size-code of the profile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The visibility of the gas lines is updated on every profile-redraw,
which is performed when the preferences changes. No need to have
these signals.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This one is rich: when changing to profile-mode, the calculated
tissues are set according to the prefs.calcalltissues flag.
The DiveCalculatedTissue::setVisible() function ignores the
parameter and insteads sets the visibility according to the
expression "prefs.calcalltissues && prefs.calcceiling".
This is because the function is also called by signals,
which provide the wrong parameter.
Pass the correct parameter in the first place. Remove the
crazy signals and the overridden setVisible() function,
which ignores its parameter, later.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, setting the visibility of chart features is a mess. It
is done when switching to the profile state and then via signals,
when the preferences are changed.
However, when the preferences are changed the chart is replot anyway.
So let us simply set the visibility on chart replot. Then in
a follow-up commit, the signals can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The plan is to simplify the visibility-control of non-interactive
chart features. As a first step identify those features that
depend on preferences-flags and factor out the setting of their
visibility into a new function updateVisibility().
This commit effectively only reorders the setting of the
visibility and therefore should have not user-visible effect.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This does the right thing even when removing a nickname by setting it to
an empty string. The oddly named DiveListNotifier handles the need to
redraw the profile when the name changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is just a quick first implementation - it will need to use the undo
code in the future, but for now this is a reasonable first step.
It's also missing the code to redraw the profile with the updated DC
name.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the menu item to rename a dive computer (ie create a nickname
for it) when right-clicking on the dive computer name of a dive computer
that has a serial number (indicated by having a non-zero ->deviceid).
It is nonfunctional because it's really just the skeleton code: it needs
the UI to actually ask for a new nickname, and then it needs to actually
do the proper "create_device_node(model,serial,nickname)" to set it (or
remove the nickname if empty).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the last displayed dive had events, those DiveEventItems had slots connected
that would update those icons if things changed. When closing the dive log and
switching to a different one, those slots were still called and would then access
freed memory (the event structure from that old dive that is long gone by then).
This code explicitly deletes those DiveEventItems which also removes those signal
slot connections.
Fixes#3305
Sugested-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The DiveCalculatedCeiling had a back-pointer to the profileWidget.
This was used for weird control-flow shenanigans, which were
removed in 975c123a30.
Remove this now useless member variable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The shouldCalcluateMaxTime and shouldCalculateMaxDepth member
variables of ProfileWidget2 are set to false during drag-mode to
avoid strange shrinking of the graph. They always adopt the
same value. Therefore, replace by a single shouldCalculateMax
boolean.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It appears that this well intended change in commit 52aa7d83b6 ("Increase event
icon size in print mode") actually causes the scaling of the event icons to be
generally wrong. This removes the hard 4* scaling and also adds some debugging
output in verbose mode.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When printing with low DPI, the dive event items become comically
large, because they are not resized like the fonts. Therefore,
scale using the fontPrintScale.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This occurs upon importing dives for example via CSV.
Make sure the profile display is cleared when selecting
such a dive rather than showing a different dive.
Allow editing the profile for such a dive.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The ADD state is not used for adding dives since adding dives
was made undoable. Therefore, rename it to EDIT state, since
that is what it is used for.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The axes of the profile are setup when switching into
the "ProfileState" and also when the preferences are
changed. The same code existed twice for both cases.
Let's factor it out into a single function to avoid
future divergence and confusion.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveEventItem had an internal copy of the event. It passed
that copy to the undo-machinery, which of course didn't work.
Simply keep a pointer to the event. All changes to a dive no
pass via the undo-machinery, which causes a reload of the profile,
so this should be safe.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Firstly, there is no point in supporting DiveEventItems without
model and axis. Secondly, this avoid pointless position-
recalculations.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is no point in having a dive event without an event.
Let's pass the event at construction time to avoid having
to handle "invalid" events.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The color was misnamed, since it has only been used for the
duration line for quite some time (since 893bea700c to be
exact).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When creating the context menu, a special menu is created for
the dive computer name.
This was checked in a loop, that set a flag and exited early.
This can all be simplified by moving the loop into its own
function. No more flag, less indentation. Overall better.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When creating the context menu on the profile, the code has
to check whether the context menu is activated on the
dive computer name to show a special menu (delete / split
dive computer).
This was done by setting a special property on the item
and then checking for that property on the item that
the menu is invoked on or its parents.
The reason the code didn't simply check the pointer was
probably that DiveTextItem uses multiple inheritance:
It derives from QObject and QGraphicsItem. It has to derive
from QObject first, because (the ridiculously broken) MOC
needs it that way. The object added to the scene is a
QGraphicsItem. Thus, we get a pointer _into_ the DiveTextItem
object.
However, that's all completely unnecessary. We can simply
compare the pointers, as the compiler will understand that
QGraphicsItem is only the second base class of DiveTextItem.
Magic!
Let's remove the cruft and simply compare the pointers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These became unnecessary along the way. "qthelper.hpp" was
included twice and <QtWidget> was to broad and was replaced
by <QMimeData>.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When printing, the animation speed was set to 0 by the
caller and later reset to the original value. Instead of
modifying global state, set it internally (in the profile-code)
to zero when in print mode.
This is another small step in making the printing independent
from the shown profile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When showing the "empty-state", the profile toolbar was
disabled. This was done via a "reverse" signal from the
profile to the MainWindow. Instead control the toolbar
in the MainWindow directly. Break out the plot-dive
functionality into a member function and there test
whether a dive is shown or not.
The signal makes no sense in the context of mobile
or printing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When switching to the "plan" or "add" (which should rather be
called "edit", by the way) mode of the profile, the "shortcuts"
for copy&paste, undo&redo, etc. are disabled. When switching
to "profile" mode, they are reenabled.
This was done in a most convoluted way:
- The MainWindow calls the set*State() function of the profile.
- The Profile emits [disable|enable]Shortcuts() signals.
- The MainWindow catches these signals and does the enabling
or disabling.
Not only is this very hard to reason about, it is also in
contradiction to the profile being part of the display layer.
Moreover, in editCurrentDive() the MainWindow disabled the
shortcuts itself, so this was all redundant.
For the sake of sanity, let's just move this logic to the
MainWindow, unslotify the [disable|enable]Shortcuts() functions
and make them private.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In planner or profile-edit mode, the plotDive() function takes
the current plan and turns it into a dive profile. Not only
is this a layering violation (the display layer modifying the
dive), it is also fundamentally flawed. The control-flow is
out of control, if you wish. There are numerous reasons why
the profile needs to be replot, many of which do not need
a recalculated dive profile.
Move the code that updates the dive-profile to the
DivePlannerPointsModel. Thus, the profile recalculations
and replots can be pooled. This will break the planner, since
there now might be missing calls to the profile recalculation.
But it already has some positive effects: when removing
multiple points, the profile is only recalculated once.
This will need much more work, but it is a start.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DivePlannerPointsModel::addStop() function is called by
the profile to add a planner-stop. It is also used internally
to create profiles.
If we ever want to include this in the undo system, we have
to split these into to versions. One will ultimately place
an undo command and update the profile, the other one doesn't.
For now, this makes the external interface simpler, as some
parameters are redundant.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive handlers are only updated by signals. This means that
switching into edit-mode has to be done in steps:
1) initialize the DivePointsPlannerModel
2) switch profile mode
3) load dive into DivePointsPlannerModel
2) and 3) cannot be exchanged, or the dive handlers are not
initialized.
To avoid this sandwitching of profile- and model-initialization,
populate the dive handlers when switching the profile mode.
Thus, the profile can be switched into edit/plan mode when
the DivePointsPlannerModel is fully initialized.
This will be important in upcoming commits, when the initialization
of the dive is moved from the profile to the DivePointsPlannerModel.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DivePlannerPointsModel::createTemporaryPlan() function had
two distinct and independent parts:
1) create the data points.
2) create the dive sample and calculate variations.
The second part was only exectuted if the recalc flag was set.
Out of the two callers, one was explicitly disabling and setting
the recalc flag to avoid the second part.
The much more logical thing is to simply split the function in
two and only call the first part.
To avoid any functional change, the second caller (the profile)
still tests for the recalc flag. However, if it shouldn't replot
a new plan, why calculate it in the first place!? And why does
the display function change the plan at all? This appears all
very ill-thought out and should be changed in due course.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When moving "dive handlers" with the cursor keys, the
profile was replot twice:
- First the recalculation of the planner model was suspended.
- The "stop" was moved.
- This led to a replot by a signal from the planner model.
However, the old profile was shown, since the recalculation
was suspended.
- The recalculation was reenabled.
- The profile war replot, resulting now in the correct profile.
A classical case of bit rot.
Instead, don't suspend calculation in the first place. This
shows the correct profile on the first replot and the second
replot can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The ItemPos structure describes the position of various chart
elements on the scene. It had two problems:
- The identifiers were starting with an underscore followed
by a capital letter. This is reserved to the compiler.
- The global object was initialized in the ProfileWidget's
constructor. This means that if there are multiple
ProfileWidgets, the structure is reinitialized even though
it is constant.
Remove the underscores (what was the point anyway?) and
initialize the structure in its own constructor. Moreover,
make the object const to drive the point home.
If this ever needs to be variable, each ProfileWidget
should get its own copy of the object.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
So far the profile operated on the global displayed_dive. Instead,
take the dive to be displayed as a parameter to the plotDive()
functions.
This is necessary if we want to have multiple concurrent
profile objects. Think for example for printing or for mobile
where multiple dive objects are active at the same time.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When moving a planner point with the cursor, nothing
is wrong with extending the dive time by stepping
beyond the current maximum. Same for depth.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The code took care to not delete planner-points when no
points are selected. However, it assumed that all selected
objects are planner-points. But then it checked whether
the selected object actually is a planner-point. So which
is it?
Remove the outter check for an empty selection. This makes
things more logical and more robust, should there ever
be other objects that can be selected.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Both loadFromDive() callers were clearing the model before
calling loadFromDive(). Move the clearing into that function
since it makes no sense to load into a non-cleared model.
Apparently this changes the way that no-cylinder dives are
treated and the code in ProfileWidget2::repositionDiveHandlers()
must now explicitly check for that condition.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There must not be two dive planner points at the same time
stamp, as this violates the laws of physics (and internal
assumptions).
The corresponding test was done in the profile code at
two different places with floating point arithmetics.
This is a bad idea, because
1) code duplication
2) danger of rounding issues
Instead, do this in one central point in the planner model
and use integer arithmetics. Simply add a few seconds until
a unique timestamp is obtained.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When moving the handle with the mouse, the old code tried
to be smart about changing the active handle when crossing
handles.
To me this always felt weird and it was inconsistent with
mouse-move. Theregore, simply do nothing special at all. The
user should hopefully get an intiutive grasp of what's going
on when moving one handler across another.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This model is only needed when in plan mode. To enable multiple
profilewidgets at the same time (e.g. for the mobile app or
for printing), make the pointer to DivePlannerPointsModel a
member variable that is initialized at construction time.
Moreover, allow passing null as the DivePlannerPointsModel,
in which case planning will be disabled. This will be useful
for simple printing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The connection to the DivePointsPlannerModel was done in two
distinct functions: setAddState() and setPlanState(), which
means that these could easily get out-of-sync. Factor this out
into a single function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When reordering the points, the DivePlannerPointsModel would
not emit the appropriate move signals, but simply a data-changed
signal over all elements. This obviously violates Qt's
model/view API, though it is probably harmless. Let's do
the right thing so that the frontend knows that the selected
item changed place.
Also, emit dataChanged only on the actually changed element,
not all elements.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The ProfileWidget2 slots, which reacted to model changes were
broken. They did not add / remove items at the changed positions,
but arbitrarily at the end. Moreover, they assumed that only
a single item was added / removed and thus violated the model/view
API.
This worked because the handles are completely reset after each
operation and the model only ever touched single items.
Nevertheless, this has to be fixed if we ever want finer grained
undo.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of manually deleting them (and the gases). Currently
there is only one point where these are deleted, but if
we implement proper Qt model/view semantics, this makes things
less headachy.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To remove reliance on global state, pass an "in_planner" argument
to AbstractProfilePolygonItem::replot(). Thus, calls to in_planner()
can be removed.
This is a bit sad, since the in_planner argument is now passed
to numerous replot() reimplementations of classes derived
from AbstractProfilePolygonItem. However, it is only needed
for one, viz. DiveGasPressureItem. Well, perhaps in the future
more features will depend on the planner mode...
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To remove reliance on global state, pass an "in_planner" argument
to decoMode(). Thus, calls to in_planner() can be removed.
This is a more-or-less automated change. Ultimately it would
probably be better to pass the current deco-mode to the affected
functions instead of calling decoMode() with an in_planner
parameter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The profile must be replotted when the dive mode changes.
Weirdly, this was routed via the dive-information tab
(making it inherently non-mobile compatible). Detect
such a change directly in the profile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was code to create a fake dc in the profile widget in
the case that there are no samples. To my understanding, this
is obsolete, as such fake data is now generated automatically
when adding dives.
If for some reason there really are no samples, quit early
and go into the empty state.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Adds fields to the advanced preferences page to modify GFLow and GFHigh for
the Buhlmann decompression model for calculating ceilings. Updated preferences
code to set the Buhlmann parameters in core/deco.c when the GF prefs are
updated.
Signed-off-by: Doug Junkins <douglas.junkins@gmail.com>
This now actually displays the calculated ceiling in the profile. There is
still an issue where if the user toggles the setting the already cached profiles
aren't recalculated - that's part of a bigger profile cleanup effort.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The profile had a static variable which prevented animation
when first showing the profile. It appears more logical to
don't show the animation when switching from the empty state.
This removes global state, as a function static variable
exists only once, even if there are multiple objects.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveHandler shows a context menu where a cylinder can be
chosen. This indirectly accesses the global displayed_dive
variable.
Remove this in a step to make the profile reentrant.
The code was quite ominous: instead of simply generating the
list of cylinders, a global model was reset and then accessed
with Qt's cumbersome model/view API. All this trampling over
global state can be removed by simply making the function
that generates the list globally accessible.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of accessing the global displayed_dive variable
in RulerItem, pass the dive. This is a step in making the
profile reentrant.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of accessing the global displayed_dive variable,
pass the dive to the various profile items. This is a
step in making the profile code reentrant.
This removes the last user of the displayed_dc macro,
which can now be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Don't access the global displayed_dive variable in an effort
to make the profile reentrant.
Note that this still accesses the global dc_number variable,
which will likely have to be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The in_planner() function is incompatible with a reentrant
profile, since it accesses a global variable. In
create_plot_info_new() it is essentially redundant, because
there is a planner_ds (ds = deco_state) parameter that
is used only when in the planner. Therefore use that as
the in_planner indicator: when non-null, the profile is
showing a planned dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The code tried to only replot the profile if necessary, notably
when in edit mode or the ceilings are shown.
That seems like pointless premature optimization, which only
complicates things: The profile is replot every time a
"dive handle" is moved, which means that we depend on the
replotting being reasonably fast. Why should it then not
be redrawn if the settings change?
Let's remove this, as it makes control flow easier to reason
about.
This makes the isPlotZoomed member variable redundant. Remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of listening to the dive-data-model changed and
axis changed signals, update the profile items explicitly
once per plot() call. This avoids double replotting of the
dive items.
The old code had at least two replots per plot() call:
one after profileYAxis()->setMaximum() and one after
dataModel->emitDataChanged().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On each profile replot, the gas axis was implicitly reset
by calling "dataModel->emitDataChanged()", which would send
a signal recieved by the axis. To make the code less confusing
and, more importantly, make order of execution deterministic,
explicitly reset the axis.
Rename the function that resets the axis from "settingsChanged"
to "update" to reflect its usage.
Moreover, remove the "setModel()" function and pass the model
to the constructore. Make it a const reference to make clear
that it can't change during the life time of the axis.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In contrast to most other items, which are cleared in the
setEmptyState() function, the profile items are cleared
indirectly via a signal from the model. Very hard to follow
and indeed, I thought I could just remove the slot.
Do this explicitly instead for deterministic code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is no point in a separate set-axis function if we never
change the axis anyway. Make the axis a const-reference to
show that it can never be changed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This one is extremely obscure: TankItem::setData(), which is
called on every replot, was passed the DivePlotDataModel,
even though it doesn't access that model at all.
Instead, it connect()s to the model to stay informed of changes
to the data. First of all, this should obviously be done
once in the constructor, not on every replot.
But also, the setData() function is called on every replot
one lines before sending the model-changed signal.
Thus, the tankitem was always repainted twice.
Just remove the whole connect() thing and go for a more
deterministic model. Should the tankbar not be repainted
anywhere, add the appropriate calls there.
Accordingly rename the "modelDataChanged" slot to "replot".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
settingsChanged() is a virtual function, which is called
when the preferences dialog signals changes. In most derived
classes, the function does nothing.
In two classes, DiveProfileItem and DiveCalculatedTissue, it
replots the item respectively changes its visibility.
However, these two flags are *not* controlled by the preferences
dialog. Indeed, the functions are also connected to finer-grained
qPref signals. Therefore, settingsChanged() can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Collect all the created profile items in a dynamic vector.
This allows us to loop over them when adding them to the
scene, instead of addressing each item individually.
Hopefully, this will also allow for a more deterministic
repaint logic, without relying on signals.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only thing left that this function did, was setting the Z-value
of the item. This can be done directly on construction.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
