Same as for cylinder info, we need to make sure that the gasmixes gets saved to the correct cylinder.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Save the edited cylinder in the correct slot.
Since the cylinder number and the used cylinder number need not be
the same we first need to test if the cylinder are used.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
This displays the used cylinders in a dive so that they can be edited.
Currently limited to 5 as a POC.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
If we don't know the vendor or product, let's not overwrite information
that we may have remembered from the last time the user downloaded from
this dive computer.
Note that this doesn't try to associate a specific cable with the
information used last time. We could be smarter here for people who have
multiple dive computers, but for the most typical user with just one
dive computer, this does seem like a good solution.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We do strip the user friendly name from BT addresses and this mistakenly
mangled 'USB device' to 'device'.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This only works if the USB device contains enough information to do so.
We need to collect more information to understand what information we
get if those get plugged in. Maybe we'll get only the vendor and need to
leave it to the user to set the product (which we can do by passing an
index of -1 for product).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Unless, of course, the user was editing or adding a dive - that would
be annoying to have interrupted (even though, of course, it's the user
plugging in the device which would trigger this in the first place).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user plugs in a device on Android we get a device string that
should allow us to figure out which dive computer was plugged in. Make
that string available to the QML UI.
Right now all we do is log it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
add enum to qPref and remove elsewhere
update source core to reference qPref.
the enum cannot be in pref.h because it is to be used in qml and Q_ENUM
need the enum to be defined as part of the class
Signed-off-by: Jan Iversen <jani@apache.org>
The info text from the download process wasn't rendered correctly.
maximumWidth ended being a recursive reference and as a result the text
would render as very narrow and super-tall field.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt 5.11 adds useful warnings when code attempts to use anchors within
Layouts and even tells you how to fix things.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
remove MapWidget entries from mobile-resources.qrc, and
reference map-widget.qrc in Subsurface-mobile.pro for iOS
Signed-off-by: Jan Iversen <jani@apache.org>
This is based on something that Anton Ludin sent to the mailing list.
Reading through the code it seemed that there were scenarios in which
DC_vendor and DC_product were not updated correctly. That's one of the
problems of the declarative approach in QML - it can be very hard to
figure out which code is run when in certain situations.
This may help address the issue with FTDI downloads no longer working on
Android.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The asynchronous load seemed to be (at least one of) the culprit(s) of
the banner occasionally not showing up.
Making the font for the cloud ID smaller looks better (and works much
better for long email addresses).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
That change clearly would have benefited from better code review.
This is a superset of a change proposed by Jan Iversen.
Closes#1406
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For some reason Kirigami.Icon mess up icon display when filename
extension is omitted. Because of this a perfectly good, scalable svg
show up as a low resolution scaled up icon.
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
calls to savePreferences was moved to prefs. in
b8eb348f54, but the corresponding
C++ code was not merged.
Revert call to savePreferences to manager.
Signed-off-by: Jan Iversen <jani@apache.org>
The commit secured that plotDive was not called before actually being used.
However our (rather fragile) C++ qml interface did not work correctly (ony sometimes).
Revert the previous commit.
Signed-off-by: Jan Iversen <jani@apache.org>
Kirigami appears to have a bug that makes it fail to show our icon.
With this we can be much more flexible in what we show in the top area
of the global drawer.
Fixes#1331
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit b8eb348f moved credentialStatus but missed one spot.
When starting from a fresh install, clicking "No cloud mode” fails because of this.
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
Looks like commit 807571a588 ("core: update deviceData default from
qml") never actually was tested with dive computer download. This looks
rather like an automatic renaming gone wrong.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
add settings variables/functions to qmlprefs
remove settings variables/functions from qmlmanager
change manager. to prefs. in qml files for setting variables/functions
Signed-off-by: Jan Iversen <jani@apache.org>
Set index of comboboxes in Download screen when the page
becomes visible instead of when it is created.
The pages is created before QBluetoothDeviceDiscoveryAgent on iOS and desktop,
therefore combobox indexes cannot be set during page creation.
Signed-off-by: Jan Iversen <jani@apache.org>
Dive list: on holding an item, the delete button
was not showing the icon.
Show GPS fixes: when swiping an item icons were
not being shown.
Partial for bug #1267
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
Adjust size of image and text to ensure that
the clipboard buttom is (nearly) always visible
The buttom is not directly visible in landscape
mode on a small device.
Signed-off-by: Jan Iversen <jani@apache.org>
Users need a simple way to report download problems. Asking them
to go into settings, activate logging, and repeat the download
is too much.
libdivecomputer.log will always be generated, but overwritten, with every
download, so the latest log is ready.
The download is very slow due to BT, so there are no impact of having the log
active, neither in terms of size (a concern on small mobiles) or write time.
Signed-off-by: Jan Iversen <jani@apache.org>
When downloading with bluetooth, changing connection did not work.
The new selection was not passed to the download thread.
Fixes#1274
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
on iOS it is practically impossible to copy the App log
to e.g. a mail! in iOS 11 the log file is stored within
the subsurface container and you first need to copy (actually
using the clipboard) out from there to the "normal" document
shared space, before it can be used.
At least iOS users (and I believe Android users) are not really
used to work with files, so the process is not easy to document
in an understandable way.
The alternative is to provide a button, which simply puts the
log on the general clipboard, allowing it to be pasted in a
multitud of applications.
Signed-off-by: Jan Iversen <jani@apache.org>
Icons used directly by Kirigami use /org/kde/kirigami
as prefix. Ex: previous and next icons on header.
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
Icons used directly by Kirigami use /org/kde/kirigami
as prefix. Ex: previous button on the GlobalDrawer.
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
We had turned this off since it caused rendering issues, but that
appears to be fixed now - and it should help to get us smoother
rendering of the dive list.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And maybe this will make it faster as well? Depends on how the binding
is implemented, I guess.
But at least it's less confusing to read now.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way the menu items describe what happens when you tap on that menu
item. That seems more consistent and intuitive.
See #1204
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In older versions of Kirigami this caused all kinds of problems so we
eventually gave up on it in commit 13c49276d1 (Revert "QML UI: make
dive list fold dive trips").
Now this seems to work much better, so let's bring back trip folding!
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of showing the map zoomed over London by default,
initialize the center at [0,0] and show the whole globe.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
centerOnLocationHard() is added in MapPage.qml so that
on `firstRun` the map is hard panned to the desired location
without animation.
This affects the selection of a new "Dive details" -> "Map it" or
when opening a GPS location in the map.
The idea behind this change is to avoid starting the map animation
from an arbitrary location such as [0,0] or London. Also, to not
start the map zoomed out completely and then zoom in on a selected
dive.
For this change to work, add the helper getCoordinatesForUUID()
to qmlmapwidgethelper.cpp/.h and use it to obtain the
QGeoCoordinates for a dive site UUID.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The background color in our own checkbox should match the page background.
Also includes some whitespace cleanup.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
In the initial move to comboboxes the correct location model
was not used. This uses the correct model and makes it behave
like the other comboboxes.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
When a dive has multiple buddies, pick the index of the first
to prevent the user from hanving to scroll through the entire
list when editing.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Removing the comparison of currentText vs editText when saving buddies
fixes the issue of data loss when dive has more than one buddy.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
The HintsTextEdit just doesn't feel natural and intuitive.
Edit, fixed rebase issues.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
When the slot pageStack.onCurrentItemChanged() is reached
make sure that the stackView becomes non-interactive.
This prevents swiping left on the map to "go back".
Also, always reload the map markers when the map becomes visible.
This is not optimal and instead something in the lines of:
DiveList.model.onChanged()
is a much better solution.
Ideally the map reload should happen on dive removal, dive addition,
dive edits and sync from cloud.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
showMap() uses a location to open Google Maps in a browser.
Make showMap() a generic function to push the mapPage on the view
stack.
Update the calls to this function from child widgets and pages.
Also either call mapPage.centerOnLocation()
or mapPage.centerOnDiveSiteUUID() depending if the caller
wants the map to center on a dive site or on map coordinates.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The Page object has the following functionality:
- reloadMap(): reload all map markers.
- centerOnDiveSiteUUID(): center the map on a dive site uuid.
- centerOnLocation(): the map on a latitude, longitude in decimal.
- Select a dive list entry based on a marker selected on the map via
diveList.setCurrentDiveListIndex()
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Add the setCurrentDiveListIndex() wrapper for:
diveListView.currentIndex = idx
wich also makes it possible to disable the scroll animation when
selecting dive list indexes which are too far apart.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Also a developer likes to see a nicely formatted page, so correct
some bugs in margin handling on the log page. There was a strange
multi-line whitespace on the top of the list, and the total width
of the page was (initially) a little smaller than full page, so
showing a small strip of the page left on the pageStack. This
just looks weird. So again, cosmetics only.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
See also 15cdcdbc6. There, we introduced the wideScreen (set to true)
to evade a (cosmetic) bug in (most likely) Kirigami. The top dive
was partially obscured on the start of the app. And by setting the
wideScreen to true, the application header became of a fixed height.
Numerous changes further in Kirigami, we can now set this property to
false. This results in a correctly displayed divelist at the start of
the app, and *also* an application header that correcly hides itself
when scrolling up, and displays itself again when scrolling down. So,
a behavior that is common to, for example, mobile brouwsers.
This all said. I still believe this is a workround for strange behavior.
In fact, we should not need to set this wideScreen property at all,
and Kirigami should behave correct in all cases (true, false, unset
at our end). It behaves correctly when set to true or false, but
still displays a partially hidden top item in the dive list when
unset.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This worked correctly while compiled against Qt 5.10.0, but after
installing Qt 5.10.1 the behavior was just wrong. And as there
seems no way to color the background of a Kirigami SwipeListItem,
just revert this, and accept the (slightly) inconsistent coloring
of the page (for now).
This reverts commit 6700715b5d.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Trivial and cosmetics only fix. The width of the rescan button
was forgotten, and this pushed the right margin to the right,
causing the combo menus to overflow the right margin.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
And another one. The SwipeListItem also needs to have a set
background color. Unfortunately, the lines between the
individual SwipeListItem disappeared, so, set the
smallest possible border on these items.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Also, this got broken after the Kirigami to verion 2.2 in main.qml.
So, set the header background color according to our theme setting.
Notice, that there is a remaining issue here. We could color the
text color in the header, but now, this seems impossible (or I
do not understand how and where to set this).
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
For some reason, after the update of the main.qml to version 2.2,
all Kirigami Pages and scrollablePages show up plain white.
So now, set a proper background for these pages.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is subtle one. With the changing of the theme color, it
appeared that the hover and selected colors in the divelist
where wrong (as in, always blue-ish). This is easily solved
by setting the activeBackgroundColor to our theme color, and
Kirigami does the rest (tint and opaque settings for the
different states a selected dive can be in).
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is a long standing issue. I wish to keep up with Kirigami developments
including new versions of their controls, but this is not always easy.
While we upgraded to Kirigmi 2.2 for most of our QML earlier, using this
new version of main.qml breaks numerous stuff. In fact, so much that
we just needed to wait.
With the progress in Kirigmi, it is now possible to upgrade, with still
some issues on our side to be fixed, but this is manageble now.
The main show-stopper was a construct to set our theme colors, for example:
Kirigami.Theme.highlightColor = Qt.binding(...)
This is not posssible any more, as the Kirigami.Theme has made these
readonly on their end.
This commit just removes the assignments to the now readonly theme
items. And the setting of a correct theme color for the action button.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Trivial removal of 2 unused Kirigami actions. These were leftovers
from the time we had a very different style of cloud account
management.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Commits fed2c5b6a1 and 572fc4707 erroneously deleted two
aliases. That is corrected here. Yes, QML with only runtime
errors can be a pain.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
See also e6e1473e6. The construction of the locationlist
was not the same as the 3 previous lists, and it needs
the inclusion of a new model file (divelocationmodel.cpp)
in the mobile app. In addition, as the mobile app is mainly
interested in a simple stringList (model) to populate a HintsText
field (or maybe later a combobox), this stringlist is added
to the model, to easy interfacing with QML.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
See e6e1473e6. Exact same commit but here for the
list of divemaster. The careful reader will spot a
small addition to the clearDetailsEdit() QML function.
Two more field are cleared.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is the first of a set of commits that are (very) similar.
It appeared that a number of more or less static lists, which are
constructed by a loop over all dives in the logbook, were executed
when changing focus to a next dive. For example, the in this
commit addressed list of used dive suits.
What was wrong was that the suitList was linked to a dive. There
is only a need to construct the list of used suits when data is
changed (and obviously, once on startup of the app). Further, it
appeared that a lot of code was duplicated and that we can use
(in this case) the same code from the desktop completionmodels.cpp.
Basically, this commit involves the following changes:
- include completionmodels.cpp in mobile and desktop (so move
it from the desktop only category to the generic category).
- remove double code from DiveObjectHelper.cpp
- Do not differentiate in the init phase and the normal refresh
of the list
- the per dive logic is now only the getting of a previously
constructed list (in init or update of the divelist).
There are no visible changes in the UI, other than a better
performance when scrolling over dive details.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is a somewhat hacky commit. For a very long time, the delete
from the divelist on mobile crashed. That is, not always for anyone,
but for me almost consistently. This commit tries to solve it.
I found that trying to save the delete immediately after removing
data from the underlying model seemed to cause the crash. Hacking
around, I found that a simple beginResetModel/endResetModel between
the delete of the underlying model data and actual save is
sufficient to solve the crash.
The big question is, why does this all work? I suspect some of race
condition between deleting model data, and giving the QML engine
the opportunity to do its thing.
This is also related to issue #311, but that is not implemented
here.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The new SHA mysteriously caused more than 300 extra warnings in the
app log. It was caused by a code change in Kirigami. The way to
suppress it is, in hindsight, after some hours of searching, trivial.
A Kirigami.BasicListItem shall have an icon defined. And as we do
not care about any icon here, just define it empty.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This commit consists of the following 3 parts:
1. There are 2 source files added, adapt our build process
accordingly.
2. Due to a change in icon and kirigami QML prefixes, we need to
adapt for this as well. Changed mobile-resources.qrc for that.
When this would not be changed, the icons will not be found.
3. To further prepare for the future, abandon the iconName
property in favour of the new icon grouped property, which
can have more attributes than only the name. But currently
it is only a syntactic change.
Tested on Android device, and no visible changes.
Signedoff-by: Jan Mulder <jlmulder@xs4all.nl
This is mainly a cosmetic improvement. The GPS menu stayed
visible, when selecting most of the options. This looks weird,
as the close of the menu is also an indication of the selected
action carried out. So, just close it
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Navigating using the breadcrumb in the header did leave the
dive detail edit (and add) mode in such a way that (for example)
navigation in the dive list was suspended. Obviously, it is
debatable what should be done. Saving the edits/add, or
cancelling them. For now, this commit cancels them
silently. This is the exact same thing that is happening when
the user selects the dive list from the drawer menu.
Fixes: #932
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
When editing (or adding) a dive, the internal data containing the
attributes on the edit page was not cleared when editing was
finished (in any way, by saving the edit or by cancelling it).
As long as the user only edits existing dives, all this poses
no problem, as at the start of a dive edit, the data is filled
from the dive to be edited. However, when adding a dive, data
coming from previous edits shows up. This not clearing data
also causes the strange effect as written in issue #950: adding
a dive, deleting it, and adding a dive again, added the first
added dive data, without the edit screen being shown.
All this can be solved by clearing the data from the edit when
editing is done.
Fixes: #950
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Trivial fix. Show the message "Turning off automatic
sync to cloud ..." when turning automatic sync to offline. Just
a more logical moment to show this message. Also rephrase the
message "Enable auto sync" to "Auto sync enabled". It shows
a status, and not an action.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Set download srceen in a sane state after a previous download
session using this screen. The erroneous behavior was very
similar to the one fixed in commit 7fe9bbe295dcf92. For example,
download some dives, quit the screen, go back, and the bottom
buttons are still selectable.
This commit resets some values when leaving the download screen
(ie. not only swiping it away), so that it looks sane at a next
visit.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Reset the Retry button on exit of the Download from divecomputer
page. So, it it not reset wehen swiping this page away, or
cancelling a running download, but resetting it on accepting
downloaded dives.
As we do not have real error reporting (from download failures),
this all is a little arbitrary. Another "fix" could be, not
changing the button text at all.
Further notice, this is not specific iOS, but also Android.
Fixes: #895
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
While the autocomplete function only works for the first entry
adding multiple comma separated buddies can still be done.
Fixes#608
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
I consider it more natural for example for the GPS menu
to stay open when an action is clicked. So this turns off
the general close but has to trigger it on individual items.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Otherwise the divecomputer has to be in pairing mode
at app start time.
Unfortunately, this leaves less space for the progress message.
My time/qml knowledge does not suffice to move that to the next line
(when moving that out of the RowLayout it overlaps with
the buttons).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
on iOS the address we display on Connection is an UUID, not
a physical address.
This change the pattern (on iOS) used to enable bluetooth_mode.
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
When the user entered a dive site using autocompletion, it
is a known site, of which we might have a GPS location already.
Just fill the known site coordinates.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Add the capability to select the location name from a list, constructed
from the known dive sites in the logbook.
Fixes: #546
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Upgrade QtQuick to 2.6. Seeing a small artifact in the application
header, lets see what happens when upgrading more includes.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
When first tested this commit, especially the dive list was looking
terrible. However, after including newer SHA's from libkirigami, and
correcting lots of spacing/margin issue, a retest of this commit shows
no strange artifact any more, and the amount of warnings in the log
output is reduced significantly. So now, it appears save to
upgrade.
Notice that main.qml still uses Kirigami 2.0. and is not updated in
this commit. With version 2.2, there is a new way of theming, that
is not (yet) compatible with our current code. Blindly upgrading to
2.2 leads to a almost black dive list, wrong button colors, and
runtime errors in the log, due to the fact the direct setting from
QML Kirigami's Theme colors is not allowed any more.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Move all the map widget platform agnostic files to the
<subsurface-root>/map-widget folder.
This avoids the confusion about the desktop version of subsurface
using mobile components. The map widget is planned as a shared
component between the mobile and desktop versions.
desktop-widgets/mapwidget[.h/.cpp] still remain as those are specific
to the desktop version.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
In commit bdf6dc7828, we pulled in some changes from Kirigami.
I checked all the new commits and they seemed just fine, and a
test (on desktop) on both Qt 5.9.1. and 5.9.2 showed no obvious
problems.
However, some time later, working on something else, I compiled
from Android to test, and saw some strange behavior in the dive
list. The topmost dive is partially hidden behind the application
header on startup of the app, but can be pulled down. Not a big
deal, but is does not look right.
After tedious testing, bisecting, etc, I found commit
d0f3941a4d7f4d4c6 in Kirigami (obviosuly, it was not clear from
the start that it was in Kirigami, as I could well have been
some error in Subsurface, or even Qt). Mentioned commit is
trivial, and handles with the wideScreen property of the
application window. With wideScreen = false, the bug is
visible, when true the bug is gone.
This all said. Just set the wideScreen to true, which can
definitely be considered a workaround. I exspect that this
commit can be reverted later on when Kirigami is fixed.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
While testing the mobile app on Qt 5.9.2, I encounted a show stopping
issue. Select a dive in the dive list, go back to the dive list (as
selecting a dive opens the details), now scroll down to a different
dive, and select one. The app starts enumerating (moved smoothly
according to the specs) all the dives between the old and the new
selected dive. So, depending on the distance, this could take forever.
Explicitly: on 5.9.2. only.
From the Qt docs:
highlightFollowsCurrentItem : bool
If this property is true (the default value), the highlight is moved
smoothly to follow the current item. Otherwise, the highlight is not
moved by the view, and any movement must be implemented by the highlight.
End Qt docs.
Setting this property to false solves the issue. Tested on both Qt 5.9.1
and 5.9.2.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The 'isReady' boolean flag is now set to 'true' only
once the Component.onCompleted slot is reached.
The flag is then used as a safe-guard in the
onZoomLevelChanged slot. Calculate the small circle radius
(mapHelper.calculateSmallCircleRadius()) only if 'isReady'
is set to true.
Prevents a crash if the Map widget is not ready, yet a zoom
level is set via the 'zoomLevel' property. The crash happens
because mapHelper.calculateSmallCircleRadius() has a callback
to the Map component to estimate some points and distances of the
small circle.
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Commit 344d976593 resulted in the start of Subsurface with a map of
the whole world. The user has to zoom in (assuming the case that the
first selected dive has a position), in evenry session. This is solved
by setting the zoomlevel at startup at the default value. Ok, this
results in a map of central London, UK, when starting Subsurface with
a dive without location, but is this as good as any map.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
A not perfect improvement, but way better IMHO. Prevent the list of
downloaded dives to grow over the buttons at the bottom. Just a simple
change by adding a bottomMargin to the list.
Notice that there is still some overlap, but for now I consider this a
trade-off between the scarce screen real-estate and the wish to present
and much as possible dowloaded dives.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Trip headers spanning more than one line where broken at incorrect
locations in the string. Not exactly sure, but I think this came with
the newest Kirigami SHA, and especially the Label change.
Carefully reading the code for the trip heading shows a "strange"
negative margin. So the margin is on the outside. This margin was
used to split the string, allowing for a small invisible part of
the string to present as trip header.
This is solved by this commit.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This does two main things to the map widget:
- if there are no coordinates, do *not* zoom out to the whole-world
view. Just leave the map alone.
- when zooming out to move to a new dive site, zoom back in to the same
zoom level it was before.
These two changes make it much more pleasant to move between dives,
particularly as you move back-and-forth without losing the zoom level.
NOTE! The zoom level gets reset if you move dives _while_ zooming is
happening, and so moving quickly between dives will still end up losing
the original zoom level, replacing it with a bigger zoom-out that was
active _during_ a previous zoom.
That could be seen as a feature (moving incrementally to an "overview"
zoom when moving quickly between dive sites), but honestly it smells
more like a bug to me. But regardless of that feature/bug, this new
zoom behavior is more pleasant than our older "always reset when
moving".
But it might be a matter of taste, so people should try this out and
comment.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation,org>
Cc: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Again, mostly related to label change. First, the top button was "glued"
to the top of the screen, so added a little margin there. It
appeared that all the other items on the screen (progressbar,
2 button rows, and the downloaded dive list) where not moving down
due to the add of that little top margin. This was solved by
anchor-ing the items together. Finally, the text of a downloaded
dive was on the top of the delegate lines. Not sure where that came
from, but easily solved by centering it explicitly.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
As in a525fff112, also the dive details top data was not nicely positioned
any more due to the deprecated and removed Kirigami.Label.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The new SHA for Kirigami did all kinds of nasty things to our DiveList.
This commit tries to repair most of the damage. Nothing more than
some margins, anchors, and even a font that changed.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Commit 8f6827ab12 brought a new SHA for Kirigami, but that introduces
a very noisy logging of "Kirigami.Label is deprecated. Use
QtQuickControls2.Label instead".
So, thats what done here.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Before this change, there was only one way to create the local
no cloud repo on the device. The user needed to add at least
one dive to the no cloud account (so that there is something
to save). While this worked in some scenarios, it could also
get things in an inconsistent state: credential status = CS_NOCLOUD
but no local repo. This was a dead end.
In this commit, the creation of the no cloud repo is made more
explicit. When asking for no cloud mode, just create an (empty)
repo for it when it does not yet exist, and otherwise, just
open the existing (possibly empty) repo.
Now, a user can have no cloud repo, next to (any number of)
cloud accounts.
This leaves one functional aspect left: how does a user abandon
the no cloud repo, by merging his data into a true cloud
account. This is code for this, that tries to do this merge in
a smart way. This seems to be broken (too). To be clear: this
is no part of this commit.
Fixes: #667
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
It can be difficult to distinguish the new marker
which is added on the map and has to be dragged
when editing a new dive location.
By adding a new grayed-out marker it becomes
possible to gray out all other markers, while
the current marker which is being edited is still
bright red.
Suggested-by: Dietrich Meyer <dietrich@sunnynames.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
