Now it is possible to enter a specific unit that is different from the
unit stored in the preferences. If only numbers are inputed the unit will
be the same as specified by the users preferences.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Once we identified that our filename is actually a git designator (as seen
by the fact that it ends in a [branchname] surrounded by '[]'), we
shouldn't try to open that filename in order to try other ways of parsing
the data; instead we should just return an error to the caller.
This way the calling code can tell that an error occured.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we only show the first cylinder we can also only edit the first cylinder.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we detect a redundant DC we free the memory reserved for the model.
Thus we need to malloc that memory here.
Fixes#1002
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used to mark CCR dives by having "SP change" event at time 0:00.
As we nowadays mark CCR dives by setting dc->divemode appropriately,
better to convert the old dives to this format as well. This way we do
not have to take the special old format into account on multiple places
in the source.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As per Tomaz recomendation the helper functions from 19588ce and e072596
are moved from qmlmanager to DiveObjectsHelper.
[Dirk Hohndel: merged with the latest code]
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The way sectioning of the dive list works is by watching for different strings
in the section.property. In order to be able to tell different trips apart we
combine the address of the dive trip variable with the location (which will
create a new section for a new trip, even if the location text is the same) and
then strip that information out before showing the trip header.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Cloud Storage is a non-gui based class, we currently use
two different approaches for cloud storage, one on the desktop
target and other on the mobile target, we should use only one.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The shorts where being used on the preferences since a long
while and we cannot just simply change them to bool since this
could break the preferences files, so work around that by
changing them to booleans, since it's the correct type for a
true / false answer.
Also, move some plot curves to the new settings style
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
start of the QSettinsg Object Wrapper usage on the code
this first patch removes two macros that generated around
200 lines in runtime for something like a quarter of it
Basically, whenever we changed anything we called the
PreferencesDialog::settingsChanged and connected everythign
to that signal, now each setting has it's own changed signal
and we can call it directly.
The best thing about this approach is that we don't trigger
repaints for things that are not directly profile related. (
actually we still do, but the plan is to remove them in due time)
this commit breaks correct atualization of the profile (because
everything was connected to PreferencesDialog::settingsChanged)
and now I need to hunt a bit for the correct connections
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is not hoocked up on Subsurface code yet, but it's already
being compilled. now I just need to hoock things up.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was the hammer part of the settings, now I need to make it able to compile ;p
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the configure parameters for safety stops on the hwOS(OSTC3)
and OSTC computers.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now with firmware 10.23, the settings behave as they should, and won't
hang the communication.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It appears that the Qt documentation might be incorrect. It claims that
the precision value is digits after the decimal point, but we have seen
examples where the values posted to the server appear to have a total of 6
digits, including the digits ahead of the decimal point.
Upping this to 9 shouldn't hurt if Qt gets fixed, but should work around
the issue reported by a tester.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit 37c10c8fd6 ("Add dive type to statistics window") not enough
space is reserved for the newly introduced array if the dive list as fewer
than 4 entries.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds dive type based division to the "yearly statistics" window.
Thus people can see the stats from individually from OC, CCR, PSCR and
freedive.
See #949
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We probably want to change that on the prefs struct too.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Rename a few methods wrongly named and place them on the correct place on the file.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On the desktop we have long had this vision of a minimum length and a
"pleasant" duration of the profile - but on a device this seems to look
like uneven margins. So let's just add space for the labels and not
otherwise mess with the duration.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It was becomming too big, a smaller class is nicer to work wirh
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also, the QtHelper.cpp file told me that some propertiies
where also TecDetails, graph related, so I moved them
to the correct preferences.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I didn't allowed the build on CMake for those files yet because
there will be tons of breackage, so when I finish, I'll allow.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This class needs to have all settings in Q_PROPERTIES
so it can be used in QML. I know we will not use all of the
settings in a visible way for the user on the QML app, but
we might increase things in the future and on different
form factors so it's good to be prepared.
Currently I implemented all of the possible properties, but
I still need to hoock up everything.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This finishes the first round of Simplication patches for the QML
basecode. The second one will be about the preferences.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And also use existing helper function to get the GPS string
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I didn't understood the logic of the define & replace,
so maybe we want a few comments there.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The connection between the C++ core and the QML code leaves a lot of room
for improvement; the following series will do small but important updates
on the code regarding QML and QtWidget coexistence and behavior.
First: simplify wrapper class, removing uneeded variable.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This compiled just fine for me but apparently the QStringList needs to be
explicitly included on Ubuntu 15.10.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This has been the cause of issues in several cases. We should simply always try
to push all data to the server - it deals with redundant uploads quite nicely.
(previous commits already stopped responding to this flag, this simply removes
all mention of it)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- load the data from settings as we start
- improve upload to server
- keep settings and in memory model in sync
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of using the Settings as our data structure and constantly accessing
them, we now have a QMap for the GPS fixes and only access the Settings to keep
them in sync with the QMap. This should significantly speed things up.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will use the depth units from user preferences when exporting the
worldmap.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Of course, as of this writing, there are no images on the server.
In addition, this patch adds comments to explain the by now convoluted
image retrieval logic (local file, filename as URL, by hash, cloud server).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As Linus pointed out in mail list, user is forced to manually renumber
his dives after doing a merge, unless the merged dives were those at
the list tail.
This patch try to manage the more usual cases, letting the user to deal
with those more complex, based on some assumptions:
1.- We are working on an time ordered list of type:
dive_table.nr ... 100 -- 101 -- 102 -- 103 -- 104 ...
dive_table.dives.number ... 234 -- 235 -- 236 -- 245 -- 246 ...
2.- It's unlikely to merge no consecutive dives, as merging is time
based.
3.- It's unlikely (although possible) to find consecutive dives with
no consecutive numbers.
4.- It would be rather bizarre to find that newer dive,of those to
merge, has lower number than older.
5.- It can be found that one (or both) dives to merge are zero
numbered.
6.- There is only need to renumber from merged dives in advance.
A variable, "factor", is fixed before reworking the dive table. This
number will be substracted from the original dive number.
If we are in point 5.- case, "factor" will be set to zero, meaning
that dive numbers will not change (if older dive is zero, merged one
will be numbered zero too and will let the user to manage this; if
newer dive is zero there won't be need of renumbering as following
dives will be correctly numbered, e.g. after splitting a dive which
is not at the tail of the table).
In most cases, "factor" *should* be set to 1.
While renumbering it can be found a dive with it's number set to zero,
this won't be changed and will remain zeroed to avoid negative
numbers. It, mostly, means that the user has pending work on his
dives.
I don't know why I've written such a big explanation for such a tiny
patch :-)
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This only deletes the fix on the mobile device, not on the server.
And it is really really slow. Re-reading the data from the settings just isn't
a smart way to do this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
and rename it to DiveObjectHelper, since it should be an QObject
based class to make it easier on the QML, grantlee and widgets
side to display the dive's internal data.
each Q_PROPERTY defined in the DiveObjectHelper.h file
can be acessed directly via it's name.
So, if you are on a model that returns a dive, acess it's name
by dive.name
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
with the adittion of gpslistmodel/location, the libraries
qt-models had a direct dependency on subsurface-core, and
subsurface-core had a direct dependency on qt-models, this is
bad.
Moving a bit of code around I'v managed to clean this out, and
also to clear a bit of uneeded code (GpsTracker and gpsTracker where
basically the same thing.)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While the conversion of uint64_t to QVariant works fine with some Qt /
compiler combinations, it fails on others. Use Qt's type instead.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is not the same as the existing download to apply the gps fixes to the
dive list. This allows us to download and store the GPS fixes in the settings.
I may end up changing things around to have a shared implementation for
downloading the GPS fixes, but for now this seemed easier.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
At the moment, if we have, say, dives ... 100, 101 and 102 and we merge 101 and
102, we get a list numbered ... 99, 100, 102. This is, probably, an
undesired behavior. The patch simple chooses lower of both dive numbers instead
of higher one.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It seems that the first language in the list of languages isn't always the one
that specifies the country code. So try the first three to see which one is the
first to contain a country code.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
