Implement exporting in UDDF format as was done in Gtk version. File menu
exports all the dives, right click on selection exports the selected
ones.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch implements GUI for importing CSV log files. One is able to
configure what columns contain time, depth and temperature fields.
Pre-configured log applications currently included are ADP log viewer
and XP5. (Both of these use actually tab as separator, so the field
separator currently hard-coded.)
[Dirk Hohndel: minor fixes]
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dive planner always showed the depth in our internal units, ie
millimeter, in the sidebar that showed the plan points.
That made little sense in metric mode, and none at all in imperial. The
_graph_ showed things in meter and feet.
So make the DivePlannerPointsModel always convert things to and from the
user units.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I am not removing this but leaving it around as this is useful for a
feature that we still need to enable - the ability to filter out which
events to display. This existed in 3.1 but is missing in the Qt version.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I always worry if these are worth following up on - but these seem pretty
clear and obvious to me. As far as the planner is concerned, depth is
unsigned.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We needed this in Gtk version as we were using a system font to show the
stars and that was missing on some ancient Windows versions. With the Qt
version we actually draw the stars so this has become obsolete.
Suggested-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- remove the build flags and libraries from the Makefile / Configure.mk
- remove the glib types (gboolean, gchar, gint64, gint)
- comment out / hack around gettext
- replace the glib file helper functions
- replace g_ascii_strtod
- replace g_build_filename
- use environment variables instead of g_get_home_dir() & g_get_user_name()
- comment out GPS string parsing (uses glib utf8 macros)
This needs massive cleanup, but it's a snapshot of what I have right now, in
case people want to look at it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some people (free divers) are loving ft/s or m/s units for vertical speeds.
Now they can choose between /min or /s in the configuration (only Qt UI).
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a ruler QGraphicsItem which can be dragged
along the profile. The ruler displays minimum, maximum and
average for depth and speed (ascent/descent rate). Also, all used
gas will be displayed.
This also adds a new attribute to struct plot_data to store the
speed (not just as velocity_t).
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
This gets things mostly right.
It creates a dive and uses the planner widget to create samples which are
copied into the dive. It fills in some reasonable defaults (DC model,
timestamp), but doesn't allow editing the timestamp (or the temperatures
and air pressure).
On accept the planner gets reset and the dive appears correctly in the
dive list.
Cancel still needs to be handled.
And I bet there are many subtle bugs lurking here and there. But it's a
start.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In add dive mode simply bring the diver safely back to the surface
(currently with a fixed ascent rate of 30ft/min (or 9m/min)).
We should make that rate configurable (for the planner as well as the dive
add function). Also, the dive add function should offer to automatically
include a safety stop.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is correct C. But debuggers in C++ mode are broken and can't display
the global variables. While I hate having to do this change, I hate not
being able to debug my software because of broken tools even more.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Command line execution of Subsurface happened before the
GUI was created, this leaded to various bugs by me(tm) over
time. This patch seems to fix all of those, by reusing the
same code for GUI interaction and CommandLine interaction.
I had to rework how the main.c worked, it used to be C code
calling C++ code, and this is non desirable, since C doesn't
really understand C++.
I Moved all of C-related code to 'subsurfacestartup.c/h' and
created a tiny wrapper to call it, so all of the C code is still
C code, and the new main.cpp calls the mainwindow->loadFiles and
mainWindow->importFiles to get rid of the bugs that happened before.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This bug manifested itself as too long deco obligation when moving
waypoints to later and then back to earlier times as all intermedite
versions were created as dives in the divelist (and the saturation of
these "previous dives" was taken into account.
It is not entirely clear to me how the dive will be permanently added to
the divelist once ok is pressed: One could in createDecoStops allocate
struct dive from the heap rather than from the stack and return a pointer
to it and which is then added to the dive list upon pressing ok.
[Dirk Hohndel: add include file to make this compile]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove circle in plan by starting the first line at the first point
rather than the last.
In addition marks all entered points as entered and not just the first and
sets line color accordingly.
Makes plan_add_segment return the added data point.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This uses a bunch of default values that we eventually need to get from
the UI, but it's a first step towards a working dive planner.
This exhibits some graphical artifacts when running, but other than that
appears to be mostly correct.
Things go far worse if I enable the changing of the scale once the deco
makes the dive longer than the displayed time window. Things quickly
spiral out of control.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I expanded the DiveHandler to include the actual time / depth of each
node on the graph - this way things will stay consistent if we need to
rescale the graph.
One thing that this makes obvious is that the whole design for the
planner so far assumes metric data. We need to make sure this works well
with feet instead of meters as well (and that it uses the information in
the units settings).
With this change we actually create a dive based on the plan input and
add the deco stops (if needed) to it - but we don't do anything with the
results of those calculations, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This data structure was quite fragile and made 'undo' when editing
rather hard to implement. So instead I decided to turn this into a
QMultiMap which seemed like the ideal data structure for it.
This map holds all the dive computer related data indexed by the model. As
QMultiMap it allows multiple entries per key (model string) and
disambiguates between them with the deviceId.
This commit turned out much larger than I wanted. But I didn't manage to
find a clean way to break it up and make the pieces make sense.
So this brings back the Ok / Cancel button for the dive computer edit
dialog. And it makes those two buttons actually do the right thing (which
is what started this whole process). For this to work we simply copy the
map to a working copy and do all edits on that one - and then copy that
over the 'real' map when we accept the changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The biggest problem here was that bool has different sizes in C and C++
code. So using this in a structure shared between the two sides wasn't a
smart idea.
Instead I went with 'short', but that caused problems with Qt being to
smart for its own good and not doing the right thing when dealing with
'boolean' settings and a short value. This may be something in the way I
implemented things (as I doubt that something this fundamental would be
broken) but the workaround implemented here (explicitly using 0 or 1
depending on the value of the boolean) seems to work.
I also decided to get rid of the confusion of where gflow/gfhigh are
floating point (0..1) and when they are integers (0..100). We now use
integers anywhere outside of deco.c.
I also applied some serious spelling corrections to the preferences
dialog's ui file.
Finally, this enables the code that selects which partial pressure graph
to show.
Still to do: font size, metric/imperial logic
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a fun one.
We only want to mark the divelist changed if the user actually changed
something. So we try really hard to compare what was entered with what was
there and only if it is different do we overwrite existing values and
record this as a change to the divelist.
An additional challenge here is the fact that the user needs to enter a
working pressure before they can enter a size (when in cuft mode). That is
not really intuitive. We work around this by assuming working pressure is
3000psi if a size is given in cuft - but then if the user changes the
working pressure, that changes the volume. Now going back and changing the
volume again does the trick. Or enter the working pressure FIRST and then
the volume...
This also changes the incorrect MAXPRESSURE to WORKINGPRESSURE and uses
the text WorkPress in English (Gtk code used MaxPress which was simply
wrong - this is just the design pressure or working pressure, not some
hard maximum. In fact, people quite commonly "overfill" these tanks.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of passing pointers to GError around we pass just pointers to
error message texts around and use kMessageWidget to show those. Problem
is that right now the close button on that doesn't do a thing - so the
error stays around indefinitely. Oops.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The DEBUGFILE logic isn't needed anymore. Nor are helpers dealing with
model / datastructure updates. Nor conditional compiles to use Gtk instead
of Qt.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
i
Added the code to show the cylinders from a dive,
this code also already permits additions from the
interface, so the user can click 'add' and insert
what he wants there.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
After the 3.1 release it is time to shift the focus on the Qt effort - and
the best way to do this is to merge the changes in the Qt branch into
master.
Linus was extremely nice and did a merge for me. I decided to do my own
merge instead (which by accident actually based on a different version of
the Qt branch) and then used his merge to double check what I was doing.
I resolved a few things differently but overall what we did was very much
the same (and I say this with pride since Linus is a professional git
merger)
Here's his merge commit message:
This is a rough and tumble merge of the Qt branch into 'master',
trying to sort out the conflicts as best as I could.
There were two major kinds of conflicts:
- the Makefile changes, in particular the split of the single
Makefile into Rules.mk and Configure.mk, along with the obvious Qt
build changes themselves.
Those changes conflicted with some of the updates done in mainline
wrt "release" targets and some helper macros ($(NAME) etc).
Resolved by largely taking the Qt branch versions, and then editing
in the most obvious parts of the Makefile updates from mainline.
NOTE! The script/get_version shell script was made to just fail
silently on not finding a git repository, which avoided having to
take some particularly ugly Makefile changes.
- Various random updates in mainline to support things like dive tags.
The conflicts were mainly to the gtk GUI parts, which obviously
looked different afterwards. I fixed things up to look like the
newer code, but since the gtk files themselves are actually dead in
the Qt branch, this is largely irrelevant.
NOTE! This does *NOT* introduce the equivalent Qt functionality.
The fields are there in the code now, but there's no Qt UI for the
whole dive tag stuff etc.
This seems to compile for me (although I have to force
"QMAKE=qmake-qt4" on f19), and results in a Linux binary that seems to
work, but it is otherwise largely untested.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Conditional inclusion of libzip, xslt and osm-gps-map just
makes testing more cumbersome, since testers might lack
Subsurface features without knowing.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The compiler on MacOSX wouldn't build Subsurface when bool
was redefined.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Functionality is unchanged, except we now have a nice process_dives
function that deals with all the logic and that gets called from
report_dives from the Gtk code.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This literally just creates the dialog and does not hook things up with
the dive list.
The idea is to abstract out the idea behind the invalid dives to allow the
user to select / deselect all kinds of dives and then do statistics on
the selected ones.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Qt ui will need to read the dive_table to populate widgets with
dives. Gtk functionality in init_ui is required to parse the dives.
Split init_ui to allow parsing to proceed and complete before Qt ui
mainwindow constructor is called.
Play with qDebug()'s printf style (Thiago!)
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the code that will load and populate the Tank Info
ComboBox that`s used by the user to select the Cylinder
description.
Code curerntly implements more than the GTK version since
the GTK version of it was a plain-list, this one is a
table based model that can be used in ListViews ( like
we use now in the ComboBox ) but also in TableViews
( if there`s a need in the future to see everything
that`s catalogued in the Tank Info struct. )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also trim the redundant "Dive" text from "Lake Dive", "Pool Dive", ....
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And as we need the names for that, simplify the way we show the tags in the
Dive Info tab (and mark them for translation while we are at it).
In the process I renamed the constants to DTAG_ from DTYPE_ (and made
their nature as being just bits more obvious).
Also mark the box on the Info tab "Dive Tags", not "Dive Type".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This started out as a way to keep dives in the dive list but being able to
mark them as 'invalid' so they wouldn't be visible (with an option to
disable that feature).
Now it supports an (at this point, fixed) set of tags that can be assigned
to a dive with 'invalid' being just one of them (but one that is special
as it gets some additional support for hiding such dive and marking dives
as (in)valid from the divelist).
[Dirk Hohndel: merged with the latest code and minor changes for coding
style and consistency. Ensure divelist is marked as
modified when changing 'invalid' tag]
Signed-Off-By: Jozef Ivanecký (dodo.sk@gmail.com)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
