So far we only did it when we added a dive or modified a manually added
dive. But the reality is that an edit of any dive could cause changes that
require the dive list to be reloaded.
Fixes#698
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This text addresses issues about the deletion of photos using the
Photos tab. It also deals with interpreting information regarding
photos laocated on an external drive that is not connected to the PC.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Select the picture, press delete, profit.
[Dirk Hohndel: removed the stray hunk that snuck into this patch]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Reading the code we should never be able to access breakcylinder without
having initialized it first, but this seems like a really cheap fix.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When trying to shorten the long date format into a "medium" length date
format we are messing up Swedish dates. This should fix the issue. Not a
great solution but should be good enough for 4.2
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We remove the time zone designation when showing times (as all our times
have no timezone). But the Spanish localization on Windows shows the time
zone in parenthesis - and the existing code then left those parenthesis
behind which looked very strange.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The gas use logic in the dive statistics page is confused.
The SAC case had a special case for "unknown", but only for
the first gas. Other gases had the normal empty case.
Also, the logic was really odd - if you had gases that weren't used (or
pressures not known) intermixed with gases you *did* have pressure for,
the statistics got really confused.
The list of gases showed all gases that we know about during the dive,
but then the gas use and SAC-rate lists wouldn't necessarily match,
because the loops that computed those stopped after the first gas that
didn't have any pressure change.
To make things worse, the first cylinder was special-cased again, so it
all lined up for the single-cylinder case.
This makes all the cylinders act the same way, leaving unknown gas use
(and thus SAC) just empty for that gas.
It also fixes the SAC calculation case where we don't have real samples,
and the profile is a fake profile - possibly with gas changes in between
the fake points. We now make the SAC calculations match what we show -
which is admittedly not at all necessarily what the dive was, but at
least we're consistent.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we have no data about the gas consumption it makes no sense to show a
SAC of 0. Instead we should show either "unknown" or nothing.
Fixes#693
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the divecomputer adds additional, unused cylinders to the dive, they
would be listed in the profile based printouts. Given that the field is
named "Gas used" that seems wrong.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This prevents zooming out to more than max in the planner. Using a Mac
MagicMouse it happens at times that the finger slides on the mouse while
dragging a waypoint which can result in zooming out further than max.
Fixes#695
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Correction of a critical typo in the user manual
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Minor grammatical and stylistic text adjustsments, following quite a
few changes to the text by several contributors over the last two weeks.
Four images are replaced to reflect the latest UI, and also to
reflect the Gnome 3 rendering. These relate to
the specification of cylinder gas in the Equipment Tab.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
warning: format not a string literal and no format arguments
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of refusing cylinder pressure data let's just mark it as red when
the values don't seem to make sense.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While on Linux it was drawn as fine 1px line, on Mac it came out rather
fat and obnoxious by default. With this it's always set to a very thin
line.
This still needs more work, but let's leave it where it is for Beta 5.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was missing from the conversion from the oldPlanner
to the new one, and it also works ok on the profile.
One thing is missing is the Labels on the bottom / left
saying which position it is, but it's already userful.
Fixes#674
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This better describes what the variable (flag) does.
It's used to inform the loop that the last row goes
our of the page limit and that we need to place a new heading
on a new page. In that context 'newHeading' is more meaningful.
The name 'isHeading' is confusing for (i == 0), since it remains
'false' yet the 0 index row is actually a heading.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If a row height is more than the available height on a page
(minus the height of a heading row) we have to skip this row (dive).
The current profile print simply does not support that and it does
not make much sense. For that to happen either the page will have
to be tiny or the user must have entered a very long text for "buddy",
"dive master", "location" or there must be some sort of a
very-large-font-while-printing type of a problem.
Technically, rows spanning on multiple pages is doable, but probably
not worth the effort.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had pointers to data structures on the stack which we frequently
reallocated. These data structure contain basically a filename and an
offset. We then create a hash of the pointers to those datastructures with
the filename being the key. And then we passed those pointers around
through a Qt model(!!!) only in order to then later look up by filename
what the offset might be.
I am at a loss for words for the lunacy behind this design.
How about we just remember the offsets and pass the integers around?
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Because of the way deleteLater() is implemented, the pictures need to be
hidden, otherwise they might stay around at the wrong time (e.g., when
printing).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we disconnect the picture releated signals then in dive add and dive
plan mode the pictures from the last shown dive could appear on the
profile. That's not cool.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Checking for available printers appears to sometimes fail, even if there
is a valid PDF or PS printer.
Instead we bail if we can't get a valid size for the printer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While it's nice to have immediate response to gradient factor changes,
there is an oddity that very low GFHigh values can cause infinite
decompression if the last stop is at 6m.
Robert fixed this and now errors out of deco after 48 hours, but if the
user simply wants to edit their GFHigh from (for example) 75 to 70 and
deletes the '5', we really don't want to trigger a recalculation for
GFHigh of 7...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With very low values of GFhigh and setting the last stop depth to 6m it
is possible to create dives that need infintie decompression time.
This ends deco after 48h and replaces the dive plan with an error message.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The only time we want the close button is when showing an error at the
bottom of the main window.
In the other cases (maintab, globe) we need to explicitly hide it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Revert "Don't add a close button to KMessageWidget"
This reverts commit 75c9bcd726.
Revert "Remove unused variable"
This reverts commit 9edee3477a.
I was fixing the wrong problem... instead of removing the handling of the
Close button I should have figured out why the close button was
incorrectly shown in the first place.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It appears that at least on Win7-64 Windows tries to create the temporary
file in C:\ and fails because of insufficient permissions. How stupid is
that.
Instead we roll our own tempfiles, based on the already existing tempfile
name that is passed in.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we add a picture to the dive, this will not change anything
else, so there's no need to recalculate the profile_plot info.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
