dump_plan wasn't updated when the switch from he/o2 to gasmix was done
in the planner code, this makes it compile again.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't show a stop if we continue at this depth.
This resolves a problem when there are more than two waypoints during deco
at the same depth. This can happen at 6m when there is a gaschange to O2
and the last stop depth is 6m (which turns the 3m stop into another 6m
stop).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the 'segment' durations equal the runtime differences even when
we don't display transitions in deco.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is kind of a random cut off, but if plotting the dive takes more than
a second and TTS/NDL is on, we force it off. Because the algorithm for
that is fundamentally quadratic in nature it can take a VERY long time -
getting users to think something is broken.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a lager step value when walking the calculations forward.
[Dirk Hohndel: this was sent ages ago and in all the discussions about the
implications I apparently never applied this]
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
[Dirk Hohndel: this was sent ages ago and in all the discussions about the
implications I apparently never applied this]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In most cases this wouldn't really matter, but when planning very deep or
very long dive with corresponding very long deco times, calculating the
deco takes long enough to make this notable.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The brainless idiot who implemented commit c539c8f861 ("Remove the .used
member of the cylinder structure") clearly worked on the basis of "it
compiles, it must be perfect".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was only semi-implemented the first time around. Now we really only
copy the ones that are indeed used.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes things more consistent. The equipment view and the sample view
of the beginning and end pressure for each cylinder correspond (and the
beginning pressures of each cylinder segment are correctly reflected in
the samples).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a new QSettings group "HTML" to save the HTML exporting settings and
restore them later.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- use heading "Style options" instead of advanced
- choice of selected dives is the same as other tabs
- changing the default font to 14
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Updating the qmake file to check and copy the theme directory under
usr/share. THIS needs to work on windows and mac.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Create theme directory that contains the html templates copied to the
exporting directory.
- dive_export.html is the main html template.
- light.css and sand.css are two separte themes.
- list_lib.js is the main javascript library.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- Separate the export dialog into two tabs general exports for other
exports and HTML export.
- Save HTML settings to JSON file
- Copy HTML templates to the exporting directory
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It seems odd to have different behavior depending on whether the window
manager tells us that the user wants to close the window or whether the
user hits quit or ctrl-q.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we edit any of these fields, we create new strings via strdup (or a
fresh tag_list). So if the edits are rejected, free all that memory.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We do all of our edits on a copy of the dive - but the tag_list points to
the tag_list of the master dive (based on how we create that copy of the
master dive). So only free the tag_list if it is already different from
the master dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
1) All the variables in the sample structures are strongly typed
2) Two additional types were declared in units.h:
o2pressure_t
bearing_t
3) The following variables were added:
diluentpressure
o2setpoint
o2sensor[3]
4) Changes to a number of files were made to chanf
sample->po2 to sample->po2.mbar
bearing to bearring.degrees
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Changes to hold a pointer to the struct picture on the model, so we can
use it to determine the correct positioning of the image on the profile.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It plots in the wrong place for now, because I need to change the model a
bit. But it shares the same pixmap with the other widget which is nice. :)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Ignore the warnings for now, this patch connects and disconnects the (not
done yet) plotPictures() method.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will make referencing it from a few places more easy.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The picture list is a single linked list where the pictures have a node to
their next element. When adding the same picture to two dives, things got
way way wrong and crashes were appearing.
This will replicate the information (filename, latitude and longitude) for
each dive that has the picture, BUT it still tries to save as much as
possible on the actual pixmap.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code correctly saves the added pictures on the xml backend.
next: git backend.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We parsed it rigth for dive computers, but not for the manually filled
per-dive case. The git save seems to have gotten it right.
I think this has been broken since the whole "move as much as possible to
the dive computer sections", but I didn't actually check.
Reported-by: roberto forini <forini.r@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also seems intuitive. What's odd is that in the Planner you get a
confirmation dialog while here you don't. We should be consistent.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The edit starts with the current value, but our data() function didn't
return that in the edit role.
Thanks Tomaz for explaining this to me.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Gas changes (can) have a bogus waypoint following at the same depth with 0
time. Those were confusing the decision whether to show a waypoint.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QPixmap cannot be accessed from outside the Main thread, but QImage can.
so change that. Also, make the Photo widget display in Icon mode.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Small changes in the model to display the pictures of the dives.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
