When computing the best mix for a target depth, for helium, one
can either require that the partial pressure of N2 is the same
as at the target depth or the partial pressure of N2 plus O2.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
We test for d being NULL so that's clearly an option we worried about, yet
we already called get_dive_site_for_dive(d) which dereferences d.
Found by Coverity. Fixes CID 350118
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When clicking "done" on the dive site edit screen, the diveSite
member variable was reset to nullptr in acceptChanges() at the
beginning of the function. This prevented posting an undo-command
as a consequence of the active widget losing focus.
Reset the diveSite variable after exiting dive-site mode, which
causes the active widget to lose focus.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The native buffer of a membuffer is not NUL-terminated, so when you want
to detach it and use it as a C string, you had to first do
'mb_cstring()' that adds the proper termination/
This was all documented in the header files, and all but two users did
it correctly.
But there were those two users, and the exported interface was
unnecessarily hard to use. We do want the "just detach the raw buffer"
internally in the membuffer code, but let's not make the exported
interface be that hard to use.
So this switches the exported interface to be 'detach_cstring()', which
does that 'mb_cstring()' for you, and avoids the possibility that you'd
use a non-terminated memory buffer as a C string.
The old 'detach_buffer()' is now purely the internal membuffer
implementation, and not used by others.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This should never matter as we should never call undoit before redoit.
Extra ensurance that we don't access random data.
Found by Coverity. Fixes CID 350076
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This one is a bit complicated as it depends on a specific flow, but it
seems like setup_cvs_parms might indeed write NULL to the element at
index 49 of parm. I'm not 100% sure that the sequence of events required
for this can happen, but adding one more pointer to the array seems like
cheap insurance.
Found by Coverity. Fixes CID 350120
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The profile repainting code that was called when a dive changed was
located in a separate function. Not only did it take a redundant
parameter, it also performed very weird stuff like entering and
exiting plan state. That did not work at all. Replace by a simple
call to plotDive() and things work much better.
There was a comment about DivePlannerPointsModel and profile
getting out of sync. So let's keep an eye out for that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The divesEdited signal sends the changed field as a parameter.
Since some undo-commands change multiple fields, this led to
numerous signals for a single command. This in turn would lead
to multiple profile-reloads and statistic recalculations.
Therefore, turn the enum into a bitfield. For simplicity,
provide a constructor that takes classical flags and turns
them into the bitfield. This is necessary because C-style
named initialization is only supported on C++20 onward!
Is this somewhat overengineered? Yes, maybe.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On undo/redo, the dive statistics tab was not updated even
if a selected dive was changed. Fix that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Implement an undo command that overwrites the dive-computers and
cylinders of the current dive with a given dive. This will be used
when replanning a dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The undo system sets updates individual dive fields on
redo respectively undo. Make salinity such a field, since
it is changed on replanning a dive.
To do this, break out the "update salinity" functionality
into its own function, add an entry to the DiveField enum
and add the corresponding switch-case.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since requiring Qt >= 5.9.1, we can use the pointer-to-member-function
overloads of addAction (introduced in Qt 5.6). This has the advantage
of compile-time checking of the signal/slot parameters.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The plan is to make the model the authoritative source of
the imported dives. Therefore, access the number of
downloaded dives from there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Clearing the table in the thread leaves the model in an inconsistent
state. Don't do that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When importing dives, consume the tables from DiveImportedModel
and not the DownloadThread. This appears more logical and avoids
an inconsistent state of the DiveImportedModel: On import the
tables would be reset, but the DiveImportedModel wasn't
informed of that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In DownloadFromDCWidget::on_ok_clicked() deselected dives were
directly deleted from the dive table, leaving DiveImportedModel
in an inconsistent state. Use the function in DiveImportedModel
instead. This also removes code duplication.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, desktop and mobile are accessing the DownloadThread
and the DiveImportedModel concurrently. This makes a big data
flow mess. To achieve a more hierarchical data flow, start
by making the DownloadThread a subobject of DiveImportedModel.
Start the download by calling a function in DiveImportedModel.
Route the finished signal through DiveImportedModel. Thus,
the model can reload itself with the new data.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The way we handle singletons in QML, QML insists on allocating the
objects. This leads to a very idiosyncratic way of handling
singletons: The global instance pointer is set in the constructor.
Unify all these by implementing a "SillySingleton" template. All
of the weird singleton-classes can derive from this template and
don't have to bother with reimplementing the instance() function
with all the safety-checks, etc.
This serves firstly as documentation but also improves debugging
as we will now see wanted and unwanted creation and destruction
of these weird singletons.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In stats tab, when only one dive is selected, on one stat, only average is
shown, except temperature which 3 same temps for max, min and avg are shown.
[Dirk Hohndel: fixed whitespace]
Signed-off-by: Fabio Rueda <avances123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In dive site mode, export selected dive sites, not dive sites
of selected dives.
Fixes#2275.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In TabDiveSite::selectedDiveSites(), the QItemSelectionModel::
selectedIndexes() function was used. Thus for every selected
dive site 8 entries were added to the return-vector!
Instead, use the QItemSelectionModel::selectedRows() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When exporting dive sites, the dive sites to be selected were collected
in the C-core. But that doesn't have access to the selected dive sites
if in dive site mode. Therefore, collect the dive sites in C++ and
pass down to the core. Use a std::vector to avoid memory management
woes.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The cylindersObject list was only used by grantlee but not by
the mobile code. Since it is quite heavy, split it out and thus
don't generate it for every dive on mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of handing a reference-to-dive to QML, prerender all the needed
properties and store them as values in DiveObjectHelper. Exception:
- date(): generated from timestamp
- time(): generated from timestamp
- cylinderList(): does not depend on dive anyway and should be made
static.
This hopefully avoids the random mobile crashes that we are seeing.
Clearly, this code needs to be optimized, but it is a start.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
DiveObjectHelper is a tiny wrapper around dive * to allow access
to dive data from QML and grantlee. It doesn't have to be a
full-fledged QObject with support for signals, etc. Therefore,
turn it into a Q_GADGET based object. This allows us passing the
object around as object, not as pointer to DiveObjectHelper.
This makes memory-management distinctly easier.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This way we can view the html generated from a print template, for
debugging, validation or printing via your favorite browser.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
When gas switching only on stops is selected, the notes
showed an extra line at the not realized stop depth. This
eliminates it. It also makes sure there are no 0 second
spurious entries. And gas switching takes more than zero
time (otherwise we would have to print a line of zero
duration for at the gas switch depth).
Reported-by: tormento <turment@gmail.com>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The setting of the disclaimer variable was removed inadvertently
some time ago, which removed the disclaimer from the printed plan.
Instead, introduce a function that returns the disclaimer with
the current deco mode. Use that function to generate the dive
notes and for printing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The application could be crashed by
1) Create dive site
2) Edit dive site
3) Undo until dive site is removed
4) Continue editing now non-existing dive site
Therefore, hook into the dive-site-deleted signal and if the
currently edited dive site is deleted, close the widget.
When closing the widget, make sure that the potentially
dangling pointer is reset to zero so that there is no
other potential use-after-free bug.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is the alternative MapWidget::reload() function, which
centers on the selected dive-site.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For historic reasons MapWidget::repopulateLabels() was called
in LocationInformationWidget::acceptChanges(). This should not
be necessary anymore, as this is done when entering/exiting
dive-site-mode.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The LocationInformationWidget repopulated the map labels if the name
or location of a site changed. This is unnecessary because the
MapLocationModel catches these signals itself. Remove these calls.
As an added bonus, calling repopulateLabels() in QML context leads
to crashes later on. Therefore this should fix at least one
crash condition when dragging a flag on the map while the
dive-site-edit-tab is shown.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When editing the dive site, for certain fields a divesChanged signal
was emitted so that the dive-list can be updated.
Arguably it is wrong to decide which fields are relevant to the
dive list in the undo-command code. Therefore, let the list
catch the dive-site-edited signal and decide itself.
But the actual reason for this commit is that if the dive-site
field of a dive changes, we might have to reload the dive-location-model
because suddenly a new dive site appears. Now if this is done
in QML context on some Qt version (notably 5.9) we get crashes
later on. But that can happen if the user moves a flag. So in that
case only send a diveSiteChanged signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since changing the highlighting to use the selected dive, dive
sites with no dive were never highlighted in dive site mode.
Obviously, because there was no dive to be selected.
Therefore special-case all dive-site selection code to recognize
when we are in dive site mode.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This one-liner was called in only one place from the same class.
Just fold it into the caller.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Owing to the recent changes, when the selection flag in the
MapLocationModel was not updated correctly when the user
manually selected the dive. Do that before raising the
divesSelected signal in DiveListView::selectionChanged()
because that will cause the MainWindow to repaint the flags.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When clicking a dive site on the map, the QML code would set
the selected dive site, but then all dives of dive sites in
the vicinity were set. But still only the clicked-on dive site
was shown.
Therefore, don't set the list of selected dive sites in QML,
but later in DiveListView::selectDives(), where we know all
the dives that were selected.
This, again, gives nasty entanglement of diverse widgets and
models.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When changing the selection the MapLocationModel was reset.
This lead to crashes on Qt-5.9 which are due to QML accessing
data that was freed during model reset. This putative Qt bug
doesn't happen on newer Qt versions. At least Qt-5.12 is known
to work.
Instead of fighting the bug, let's simply not reset the model
but send a dataChanged() for every element of the MapLocationModel.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In MainWindow::refreshDisplay() with doRecreateDiveList=true
the map was reset before the dive list was recreated. This
makes no sense and only worked because the map was reloaded
again when a dive in the list was selected.
Reload the map after recreating the dive list.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Experimentation has shown that the image of a flag will
only be changed after dataChanged() if it is a simple
property. The old code had a complex QML expression and
then - for some reason - it didn't work.
To give us better control over the flags and avoid full
reloads of the map therefore introduce a model-property
pixmap name. The name depends on whether the site is
selected and if not, whether we are in divesite-edit mode.
This makes the code rather convoluted. Firstly, we have
to save whether the site is selected in the map-item.
Secondly we have to access the global map-widget, which
in turn has to go to the map-widget helper (layering
violation!).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To recognize HTML-notes the text was scanned for <div> tags. But
apparently the planner notes do not feature such a thing. Therefore
extend recognition of HTML to <table> tags.
Note we can't use the <html> or <span> tags, because these are
*always* produced by the QTextEdit::toHtml() function.
Fixes#2265
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replaces some enums with names that do not clash with windows #defines.
Specifically:
ERROR -> ERRORED, PASCAL->PASCALS, IGNORE->IGNORED,FLOAT->FLOATVAL
Signed-off-by: Paul Buxton <paulbuxton.mail@googlemail.com>
The constructor of PasteState was clearing an uninitialized
weightsystem-table. Very silly. Initialize it instead.
Fixes#2253
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
CylinderObjectHelper is used for structured formatting of cylinder
values in grantlee types. Instead of keeping a reference to a
cylinder, turn it into a value type containing the formatted strings.
This should be distinctly safer, as we don't risk having stale
references flying around. Moreover, we don't have to use pointers
but can use containers containing plain CylinderObjectHelper. Thus,
no explicit memory management is needed, making the code distinctly
easier to understand.
Sadly, currently grantlee does not support Q_GADGET based Q_PROPERTY.
Therefore a GRANTLEE_*_LOOKUP block has to be added. This can be
removed in due course, as a patch to remedy this issue is in current
grantlee master.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
But don't show our cloud storage entry (as that is already in the File menu,
anyway).
This is extremely useful because while you can manually enter a file name to
save to (and therefore can use the 'magic' git repo syntax), on most OSs there
is no way to enter that non-existing 'file name' (which is the git branch in
square brackets) in the file open dialog.
Fixes: #2236
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A number of architecture-dependent functions were declared in
dive.h. Move them to file.h so that not all file-manipulating
translation units have to include dive.h. This is a small step
in avoiding mass-recompilation on every change to dive.h
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
