This function was called after creating the items. It can be
called directly to create the items. Less chance of mixups.
For this to work, the initialization of isGrayscale has to
be moved to the front, because createPPGas sets the color
according to this flag.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of typing out the same arguments again and again,
do the allocation of DiveProfileItems in a templated function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
A few DiveCartesianAxis functions that were pure accessors
were not const. Make them so. Moreover, mark a few overridden
virtual functions as such.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The profile items had a "setModel()" function to set
the DivePlotDataModel post creation. The model is never
changed. It does however mean that the model might be
null in a short period between construction and setting
the model.
To simplify reasoning about this code, set the model
in the constructor. To drive the point home that the
can never change and cannot be null, turn it into a
reference.
Yes, this is gratuitous bike-shedding, but it helps
me analysis the code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveCalculatedCeiling profile-item has a recalc()
function, which calls "dataModel->calculateDecompression()".
This is a questionable reversal of control-flow: The
profile-item should paint the model-data not change it.
The code was supposed to be called under two conditions:
1) The value of the calcceiling3m preferences flag changed.
This code was buggy for two reasons: Firstly, the cached
value was always initialized to false, which means that
sometimes the first call was missed. Secondly, the
settingsChanged() functions was only called when closing
the preferences window, not when changing the flag in the
profile widgets.
2) The datetime of the dive changed. The whole control-flow is
pretty absurd (due to "bit rot"):
- The replan-dive command sends a date-time changed signal.
- The main tab changes the date-time and informs the profile.
- The profile sends a signal to the item.
- The item instructs the model to recalculate the
decompression.
- The model causes the profile to be redrawn.
In any case, the whole thing is moot, because the decompression
is recalculated for *every* profile plot in create_plot_info_new().
Let's remove the code from the DiveCalculatedCeiling profile-item
and the calculateDecompression() function, which is now not
used anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The people binner (called "buddies") is too coarse. Split into
buddies, dive guide and people (the old "buddies", which is
a combination of buddies and dive guide).
Reported-by: Peter Zaal <peter.zaal@gmail.com>
Reported-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This gets us better log messages and better spacing - but it's far from
good and all of this should be squashed into one working version in the
end.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use Q_PROPERTYs of the StatsManager to correctly set
the current index of comboboxes after a state changed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This doesn't look great, but it's already part of the breeze-icons,
so it's very easy to add - and it's better than no icon.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This has been a thorn in my side for a long time. The old code was
terrible and insanely fragile. The new code is really dumb and quite
fragile. So definitely an improvement?
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Android and iOS use qmake, so add the code to the .pro file.
This also removes all remnants of QCharts includes and uses and all the
references to QCharts in our various build systems.
That was a brief but extremely useful detour.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a reasonably flexibile mobile page that tries to do the right
thing for both portrait and landscape mode. In order to get the most out
of a mobile screen, it's implemented in a way that always gives it the
full screen (it does so by emptying out the page stack and being the
only page shown - brutal, but effective).
This commit also contains a bunch of other random cleanups that didn't
really justify being in separate commits.
Parts of this was written by Berthold, hence the double SOB.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In analogy to "QMLManager", add a "StatsManager" class,
which manages the statistics module on mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It turns out that the wrong base class was used for the chart.
QQuickWidget can only be used on desktop, not in a mobile UI.
Therefore, turn this into a QQuickItem and move the container
QQuickWidget into desktop-only code.
Currently, this code is insane: The chart is rendered onto a
QGraphicsScene (as it was before), which is then rendered into
a QImage, which is transformed into a QSGTexture, which is then
projected onto the device. This is performed on every mouse
move event, since these events in general change the position
of the info-box.
The plan is to slowly convert elements such as the info-box into
QQuickItems. Browsing the QtQuick documentation, this will
not be much fun.
Also note that the rendering currently tears, flickers and has
antialiasing artifacts, most likely owing to integer (QImage)
to floating point (QGraphicsScene, QQuickItem) conversion
problems. The data flow is
QGraphicsScene (float) -> QImage (int) -> QQuickItem (float).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Copy&paste error: the 20 m binner binned to 10 m.
Reported-by: Peter Zaal <peter.zaal@gmail.com>
Reported-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When calculating the quartiles, we need the count of dives
anyway, which makes it trivial to export this value to
the frontend.
Fixes an erroneous "mean", which should be "median".
Suggested-by: Peter Zaal <peter.zaal@gmail.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Otherwise we end up showing the gasmix in a different form after editing
for the usual air percentages, because we haven't normalized the gasmix
values and store them back in the dive in the non-normalized format.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
New (late 2020) iX3M hardware (refered to as 'iX3m with Sequared Buttons'
in the Ratio support section) appears to identify as iX5M, both in the
Bluetooth name and reported revision e.g.
$ ./ratio-toolbox-x86_64.AppImage info | head -n2
Model: Ratio® iX5M GPS TECH+
Firmware version: 4.1.26/016 (English)
Add a second Bluetooth name matcher for this variation, returning the same
(generic) model as is currently used.
Signed-off-by: Damian Zaremba <damian@damianzaremba.co.uk>
The dive sites where sorted by location in RAM, which is just
silly. Add a DiveSiteWrapper that sorts by name, though that
should probably be improved.
Suggested-by: Peter Zaal <peter.zaal@gmail.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This makes sense and is easy to implement.
Suggested-by: Peter Zaal <peter.zaal@gmail.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When calling build.sh with no args asking for a specific build type, that
should be equivalent with calling it with the -desktop arg.
Reported-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The range for a one-bin chart is [-0.5,0.5], thus the range
in an n-bin chart is [-0.5,n-0.5], not [-0.5,n+0.5].
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was requested on the mailing list and it makes sense to
have it. Of course, not all charts make sense: e.g. a plot dive-#
vs. count is a bit redundant...
Sadly, this can't use the generic IntRangeBinner, because dive-#s
start at 1, not 0.
Suggested-by: Christof Arnosti <charno@charno.ch>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was requested on the mailing list. Reduce code size somewhat
by deriving the binner and the variable classes from common
base classes with a mean-vs-max flag.
Suggested-by: Christof Arnosti <charno@charno.ch>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This workflow will download the current snaps published in the `candidate`
channel for all architectures and check them for packages with published
Ubuntu Security Notices. If it finds one, it will trigger a build of the
snap recipe:
https://code.launchpad.net/~subsurface/+snap/subsurface-stable
This will rebuild the snap with patched packages and publish it to the
`candidate` channel.
Signed-off-by: Michał Sawicz <michal@sawicz.net>
The grid is based on the axis ticks. If labels in histogram
axes were skipped (because there are too many bins), it could
happen that the grid was incomplete, because the first and/or
last tick were missing. Add these explicitly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The info box was placed either above or below the mouse-pointer.
If the pointer is at the center and the infobox higher than
half the chart, it would cross the border. Detect this case
and place the info box at the center.
Same logic for right/left, though that should typically not
happen.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The coordinates of these were calculated when creating the feature.
This is wrong, because the min/max values of the axes can change
on resize to get "nice" number. Therefore, recalculate after resizing.
This means that the general "LineMarker" class has to be split into
two classes, one for regression lines and one for median/mean
markers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Easy enough to implement, but one weirdness:
To get the height of the rotated text, one has to access the
width() member of the boundingRect. I'm not sure if that makes
sense, but so be it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace by custom implementation, with the ultimate goal to
remove the QtCharts module. This doesn't yet display axis
titles or a grid.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The bars were set to the z-value of the labels. Not an issue,
since the labels are generated after the bars and therefore
plot later. Still, do the right thing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since we want to get rid of QtCharts, we have to render our own
title. Simply keep around a QGraphicsSimpleTextItem and put in
the center of the chart. Define the borders to the scene as
constants.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the future we want to use our own axis implementation to
convert from/to screen coordinates. For this purpose, we
need to save the axes with the series. Especially if we want
to support multiple series on different axes.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The chart was passed as argument to the function recalculating
the axis labels. Instead, pass the chart in the constructor of
the axes and save it. This gains us flexibility for the future:
There will be more functions that need to access the chart (e.g.
resizing of the axes).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Checking a field that we intentionally don't store to disk is obviously
wrong. It's been this way for a long time and it has annoyed me many
times, but somehow I never spent the time to track down why this was
happening.
It makes much more sense to use the presence of either the don't check
flag or a next check date as an indication that we have already asked
this question.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It seems to make more sense to have it there with the 'Yearly Statistics'
and not in the Log menu. Interestingly enough, both locations were clearly
considered when first adding this in commit 106f7a8e0e ("desktop: add
statistics widget dummy and application state") as you can tell by the
never implemented actionViewStats.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>