This was rather trivial and modeled after the previous edit
UndoCommands. Since this is the first time we're editing
integers a new constructor instantiation had to be added.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This one was trivially modelled after notes editing. Only difference:
the textChanged() signal was replaced by the editingFinished()
signal so that we're not generating undo-commands on every key-press.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a new UndoCommand for dive mode editing. This one is a bit
special, as the mode is associated with a dive computer (DC),
not a dive. Thus the edit command has an additional parameter,
viz. the index of the DC.
This does not fit properly to the EditBase class, as this class
isn't aware of additional parameters and therefore this parameter
is not sent via signals. At the moment this doesn't matter. In
any case, the semantics of editing are weird and therefore let's
do the simple thing (derive from EditBase) and let's see what
the future brings.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To keep the UI in a consistent state, update the notes field if
it is changed by an undo command. To that purpose, add a new
signal to diveListNotifier with a list of dives and a field-id
as payload.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Implement a first rudimentary dive-editing command. The main code
resides in a base class Command::Edit, which calls virtual functions
to read / set the fields and extract the field name.
Implement an example: editing of dive notes.
This dose not yet update the UI on undo / redo.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a "purge unused dive sites" button to the dive site list.
Connect it to a new PurgeUnusedDiveSites command. Implementation
was trivial: simply copy the DeleteDiveSites command.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Stretch the name and description columns in the dive site table,
so that they don't start too small. This should only be a temporary
solution, as it disables the save column width to preferences
feature of TableView.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The edit dive site button was connected to a *signal* of MainWindow,
which was connected to a slot of MainWindow. Remove the unnecessary
intermediate signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add an edit column that calls the new editDiveSite() function
of MainWindow. The calling code is in DiveSiteSortedModel.
Quite illogical, but that's how TableView works, for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In analogy to the trash-icons, cache a small rendered version of
the edit icon. This will be used in the dive-site table. Rename
the icon alias from "duplicate-edit-icon" to "edit-icon", as
it actually is not a duplicated. The other "edit" icon is an
"undo" icon!
Move the accessor functions to cleanertablemode.cpp. This is not
the ideal place, but since the functions are declared in
cleanertablemodel.h it's certainly better than the old place
(models.cpp)!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As long as a text field is active, CTRL-Z only affects this field.
Thus it is suprisingly hard to undo edits. There seems to be a
fundamental problem with CTRL-Z handling.
To make it somewhat easier, catch any ESC-key event and move the
focus to the MainWindow. This effectively removes the focus from
any text field.
This all appears very wrong, but so far I wasn't able to find the
root cause of the problem.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The signal was caught by the MainWindow to:
1) call setDefaultState()
2) call refreshDisplay()
3) call refreshDisplayedDiveSite()
1) Let's call that directly from the widget. The reason is that in
the future there might be multiple way to get into the widget and
therefore the widget needs finer control.
2) Remove this call as it produces an unsteady UI.
3) This should be done by undo commands, not only when finishing
dive site editing.
Thus, the signal becomes unnecessary and can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This one was rather trivial, as there is no actual merging
done. Quite simply, a number of dive sites are removed and
their dive added to a different dive site.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Simply copy code of the other edit dive site functions. Here though
introduce a destructor in the undo command to free the taxonomy data.
Remove the taxonomy member of the LocationInformationWidget class,
because it is not needed anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since no dive site field editing enters edit mode anymore,
the whole edit mode state and code can be removed from the
widget.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Simply hook into the appropriate signal. Thus, the "update dive site
location" button can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Simply copy the code of note editing. It's a bit more complex,
since we have to parse the Gps coordinates. For consitency,
rename the COORD field to LOCATION (the field in the dive_site
struct is called LOCATION).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These were never used and it's hard to imagine when one of these
would be used. Typically users are more interested in the coordinates
than just one component, no?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Simply copy the code of notes editing, but use the taxonomy_* functions
to read and set the value. Moreover, replace the three TAXONOMY_n field
ids by a single TAXONOMY id. We will probably never show one column per
taxonomy field, but rather a single column with a string derived from all
taxonomy fields.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, the notes field uses a QTextEdit, which doesn't
send a signal if it goes out of focus. But for undo of
dive-editing we don't want to create an undo object for
*every* text change.
Thus, create a custom TextEdit widget that derives from
QTextEdit and turns the focusOutEvent into a editingFinished
signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the dive site widget, use the undo commands instead of editing
only on accept. This introduces an inconsistency betwee the
name and description and the other fields. This will be fixed
in follow-up commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If the name of a dive site is edited, it might wander somewhere
else in the table and thus out of view. Hook into the "dive site
changed" signal and scroll there.
The code is rather subtle as it depends on signals being called
in a certain order: First the item is moved in the model, only
then can we scroll to the correct place.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When adding a dive site, enter the name field of the new dive site.
Thus, when adding a new dive site, the user can immediately edit the
name.
The code is rather subtle: It hooks into the dive site added signal
before executing the command and unhooks afterwards. This only works,
because signals are executed in order of connect - thus the model
adds the index first and only *then* is the field edited.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Implement a dive site addition undo command and connect it to
the add dive site button. The added dive site has a default
name ("new dive site").
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Simply duplicate the code of dive site name editing. Split out
the common functionality that swaps a C and a Qt string.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was a way of deleting dive sites by clearing all fields.
This is not necessary anymore, as now the user can delete a
dive site in the dive site list.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This feature will be replaced by.
1) An explicit purge empty dive sites feature.
2) Not allocating dummy dive sites for GPS coordinates.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Implement an undo command that edits the name of a dive site.
Connect it to the dive site table, so that names can be edited
directly in the table.
Send signals on undo / redo so that the dive site table and
the dive site edit widget can be updated.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Create a new undo-command for deleting dive sites. If there are dives
associated with that site, the dives will be removed. The frontend
is not yet updated in such a case, as that infrastructure is in a
different PR.
Connect the trashcan icon of the dive site table to the undo command.
Currently, this code is in the dive site model, which makes little
sense, but is how the TableView class works. We might want to change
that when cylinder and weight editing are made undoable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The LocationInformationModel used to sort its entries and was completely
rebuilt after every change. This makes it rather complex to support
incremental changes.
Instead, keep LocationInformationModel sorted by UUID so that indexes
are consistent with indices in the core dive site table.
Implement sorting by other columns than name and enable sorting in the
dive site view.
Finally, don't cache the list of dive site names for the mobile app,
since that would also need some rather convoluted methods of keeping
the list up to date. Calculate it on the fly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Introduce two DiveListNotifier signals which are sent by
the undo commands if dives are added to / removed from the
core.
The signal has the dive site and the index in the global
dive site table as payload. Thus, the model has only to
remove the appropriate rows.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Turn the table functions of the dive site handling into macros
as was already used for dives and dive trips. This has the effect
that the table is kept sorted by UUID.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
dive- and trip-table functions are generated in dive.c by macros.
Move this macros to a new "core/table.h" header file.
Thus, these functions can be used for other tables (e.g. dive site)
and the trip function can be moved to a separate translation unit
(divelist.c being quite large already).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The other dive- and trip-table functions were already autogenerated.
Let's do the same for these two.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For consistency with remove_dive(). Moreover, swap parameter order
in remove_dive() so that both functions use the same parameter order.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a new signal to DiveListNotifier. Send signal if dives are
added or removed and therefore the dive count of a dive site
changes. The dive sites are collected and the signal is sent
at the end of the command.
Add code to update the table view.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a very simple tab-widget presenting the list of known dive sites.
The table is rendered using our custom "TableView".
The (mis)uses the "LocationInformationModel". It moves the items
to be displayed (delete, name, description, number of dives) to the
front and makes the others hidden.
Moreover, it was necessary to limit the geo-tag decoration role to
the name to avoid having the icon next to each column.
Make the trash-can icon active and the name and description editable.
This is modelled after the cylinders-table code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
1) The second parameter (selected_only) was always false. Therefore,
remove it.
2) Simplify the function by simply returning the reference count.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of setting dive->dive_site directly, call the
add_dive_to_dive_site() and unregister_dive_from_dive_site()
functions. In the parser this turned out to be a bit tricky.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a dive site table to each dive site to keep track of dives
that have been added to a dive site. Add two functions to add
dives to / remove dives from dive sites.
Since dive sites now contain a dive table, the order of includes
had to be changed: "divesite.h" now includes "dive.h" and not
vice-versa. This caused some include churn.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The function is defined in qthelper.c and thus not all users
of dive.h have to suck in the xslt headers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the declaration of these functions to "file.h" and "parse.h"
according to the translation unit they are defined in. Thus, not
all users of "dive.h" have to suck in "sqlite3.h".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the UUID will be overwritten on save and is only used on save
and load, set it only on save or load. For other created dive sites,
leave the UUID field uninitialized.
This means that the UUID will change between saves. Let's see how
the git saver handles that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We absolutely want to avoid dive site with the same UUID.
But that could happen when reimporting a log where the
dive sites diverged.
Therefore, on adding a dive site to a table, change the UUID
if it already exists. Since dives are associated to dive
sites with pointers, this should have no negative impact.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
