This patch fixes an invalid dive site selection when
you where typing the name of a dive site for your current
dive.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
First make sure all the data in displayed dive is correctly recorded,
otherwise things could get overwritten when the filter is removed and we
redisplay the current dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user downloaded the GPS data from the Subsurface webservice before
naming a dive site, we run into a special case where entering a new name
for a dive location should just update the name of the automatically named
site which already has the correct GPS information.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the location is only true with a valid uuid, set the
uuid on it, it will search for a valid name and set there.
this fixes a few inconsistencies handling the locations.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now mouse and keyboard navigation over the list of current
dive sites will update the marble globe position.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the mouse moves over the dive site list, the globe
should show the current one under the mouse.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Each time we searched for an icon on the qt resource
we had to open, inflate, create, store, delete the icon.
now we search for it only once, use as cache and make
the world a better place.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the message to 'This dive site is being edited' was
being show while the popup to choose the dive site, the
line edit was being covered. now it correctly moves to
the correct place.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Unused dead code / hack for the old QCompleter
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If you select a dive site with a different uuid than your
current dive.dive_site_uuid, you should get a different
pallete to state clearly that something changed.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Only set the currType and currUuid if text changed.
This is needed because if you hit key_down it would
set NEW_DIVE_SITE because a keypress on the lineedit was
due.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Start to make this thing usefull: Upon selecting the current index
or writting something on the line edit, we need to set the dive site.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Space and tab should select the item in the itemview and hide
it; enter and return also do that automatically.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The line edit wasn't being properly updated regarding its
paint event. Turns out it was because it received a focus
out event and then stopped refreshing the paint.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Connect the view activated signal to send us the index.
Removing debug output that I forgot inside it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Keypress management is one of the main functions of the completer, so we
must create an event filter and hook things up properly.
key esq / enter should close the popup (and not leave us with a popup open
and no way to close it - it breaks X)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The popup should be shown beneath the QLineEdit. this code here
is shamelessy stolen from the QCompleter source code because I
really didn't want to rethink the correct way of doing this.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was missing in the delegate - now it's prettier.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since I removed the old location edit from the UI, I also need to
remove a bit of code from the UI that was calling it.
fix a few crashes regarding the old location edit.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the bare minimum skeleton of the new completer for the dive site
management. Nothing works, yet, nothing is hoocked up, yet.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And also show a warning to the user saying that that
action is non-cancelable.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Get the Qt data structures and convert to something
that we can use in our C - core.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We where showing the UID, wich didn't made sense.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So we can merge them later - currently we are showing
only the ID, ugly - fixing next.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The UI detects when it should refresh the loction after the
user finished editting a divesite. Creating and editting
divesites is now working even when the current dive is not
saved yet.
Signed-off-by: Sander Kleijwegt <sander@myowndomain.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A divesite uuid is created using the timestamp of the currently
selected dive. When there is no current_dive, use the current
time to create a uuid.
Signed-off-by: Sander Kleijwegt <sander@myowndomain.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user clicks on the first or second option of the drop
down list, subsurface will move him to the dive site edit panel
automatically, since it's a new dive site and there's no information
about it yet.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Moved the get taxonomy button from the maintab to the edit dive site
widget.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Strangely, it still doesn't show the flag where it should be
(but it shows just after a reselect, so it's mostly a cache
issue somewhere)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we clicked in the globe and changed programatically
the text on the coordinates edit widget, the background
was still white instead of the bright yellow that it should
have to show that it was modified.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The accept method didn't save the gps edit even if we
put correct text on it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
