This patch makes a couple of modifications:
1) divelist.c:delete_single_dive() now tries to free all memory associated
with a dive, such as the string values for divemaster, location, notes &
etc.
2) dive.c:merge_text(), now always makes a copy in memory for the returned
string - either combined or one of the two which are passed
to the function.
The reason for the above two changes is that when (say) importing the same
data over and over, technically a merge will occur for the contained dives,
but mapped pointers can go out of scope.
main.c:report_dives() calls try_to_merge() and if succeeds the two dives
that were merged are deleted from the table. when we delete a dive,
we now make sure all string data is cleared with it, but also in the actual merge
itself, which precedes, copies of the merged texts are made (with merge_text()),
so that the new, resulted dive has his own text allocations.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had logic to remove duplicate dive computer information after merging
dives, but it didn't actually work.
Why? Because we had used the 'res' dive computer pointer to traverse the
list of dive computers, so it no longer actually pointed to the first
dive computer in the result list any more, and so the "remove redundant"
code only removed redundant dive computers from a limited and incomplete
list.
Oops.
Also, before checking the whole event and sample list, check if it's the
exact same dive computer using our new "match_one_dc()" helper function,
and don't even bother checking for sample details if it is.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we havd divecomputer model and dive ID information available, use
that to match existing dives when trying to merge them.
Otherwise fall back to the fuzzy time-based merging logic.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I foolishly changed visible_columns in both the (ill-named) cns branch and
master...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Conflicts:
divelist.c
gtk-gui.c
profile.c
We either pick the CNS reported by the dive computer at the end of the
dive, or the maximum of that and the CNS values in the samples, if any.
As usual, this column in the dive list defaults to off and it is
controlled by a setting in the tec page of the preferences.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now we can simply remember the state of all the preferences at the
beginning of preferences_dialog() and restore them if the user presses
'Cancel'.
Fixes#21
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the new members to the sample structure and fills them from
supported dive computers (Uemis SDA and OSTC / Shearwater Predator,
assuming you have libdivecomputer 0.3).
Save relvant values of this to the XML file and load it back. Handle the
new fields when merging dives.
At this stage we don't DO anything with this, all we do is extract them
from the dive computer, save them to the XML file and load them back.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
From 178a3f0d6d5112f76943fec5f8c1c1f3b173a7f4 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri, 7 Dec 2012 09:34:18 -0800
Subject: [PATCH 2/2] Tune the dive joining surface event insert code
So this makes us do surface events only if the samples are more than one
minute apart, and are shallow enough (randomly selected at 5m).
We can add more heuristics. Maybe we should compare the 1-minute sample
time limit of the previous sample to the time to the sample before that:
if some computer (or manually entered dive) has a long time between
*all* samples, we'd make the cut-off time longer.
Baby steps.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This doesn't really change the logic of the merging, but it does mean
that the end result tends to be less unexpected: when downloading dives
that end up being merged with pre-existing dives (because you have
multiple dive computers, for example), the newly downloaded dive data
will tend to be appended to the old dive data, rather than showing up
first.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Handle the case where we have no divecomputer information.
Reported-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This actually makes us internally use 'micro-degrees' for latitude and
longitude, and we never turn them into floating point either at parse
time or save time.
That said, the Uemis downloader internally does still use atof() when
converting things, which is likely a bug (locale issues and all that),
but I'll ask Dirk to check it out.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This tunes the heuristics for when to merge two dives together into a
single dive. We used to just look at the date, and say "if they're
within one minute of each other, try to merge". This looks at the
actual dive data, and tries to see just how much sense it makes to
merge the dive.
It also checks if the dives to be merged use different dive computers,
and if so relaxes the one minute to five, since most people aren't
quite as OCD as I am, and don't tend to set their dive computers quite
that exactly to the same time and date.
I'm sure people can come up with other heuristics, but this should
make that easier too.
NOTE! If you have things like wrong timezones etc, and the
divecomputer dates are thus off by hours rather than by a couple of
minutes, this will still not merge them. For that kind of situation,
we'd need some kind of manual merge option. Note that that is *not*
the same as the current "merge two adjacent dives" together, which
joins two separate dives into one *longer* dive with a surface
interval in between.
That kind of manual merge UI makes sense, but is independent of this
partical change.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When picking the "better" trip, we stupidly looked not at the trip
location, but at the _dive_ location.
Which obviously didn't actually pick the "better" trip information at
all, since it never actually looked at the trip itself.
Oops.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit bb6b6b49a6d4 "Start merging dives by keeping the dive computer data
from both dives" created a compile time warning. This simply adds an #if /
Yes, this might accelearate bit rod in the code, but I just dislike the
warning message when compiling Subsurface.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now that we have dive computer device ID fields etc, we can do a much
better job of merging the dive computer data.
The rule is
- if we actually merge two disjoint dives (ie extended surface interval
causing the dive computer to think the dive ended and turning two of
those dives into one), find the *matching* dive computer from the
other dive to combine with.
- if we are merging dives at the same time, discard old-style data with
no dive computer info (ie act like a re-download)
- if we have new-style dive computers with identifiers, take them all.
which seems to work fairly well.
There's more tweaking to be done, but I think this is getting to the
point where it largely works.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also, note that we do *not* do the "find_sample_offset()" any more when
we merge two dives that happen at the same time - since we just keep
both sets of dive computer data around.
But we keep the function to find the best offset around, because we may
well want to use it later when *showing* the dive, and trying to match
up the different sample data from the multiple dive computers associated
with the dive.
Because of that, this causes warnings about the now unused function.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we have a preferred dive computer that overrides old information
when merging two dives, we just copy the dive computer data over.
However, we need to clear the source of the dive computer data so that
we then don't free the sample data when that old source of the newly
merged dive gets free'd.
This fixes a memory scribble (and likely SIGSEGV) for the "prefer
downloaded" case.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For now we only have one fixed divecomputer associated with each dive,
so this doesn't really change any current semantics. But it will make
it easier for us to associate a dive with multiple dive computers.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used to avoid some extra allocations by just allocating the dive
samples as part of the 'struct dive' allocation itself, but that ends up
complicating things, and will make it impossible to have multiple
different sets of samples (for multiple dive computers).
So stop doing it. Just allocate the dive samples array separately.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When this was first implemented the assumption was that a downloaded dive
that is to be merged with an existing dive would have the same time stamp.
But as Linus pointed out even back then, this does fail if a dive has been
merged with a download from a different dive computer before (think:
download from computer a, then download same dive from b, then improve
something in the parsing from computer a and try to redownload; the time
stamp could have changed).
This commit also fixes a silly omission in the merge_dives() function
(which ended up ALWAYS prefering the downloaded dive) and finally
implements the necessary changes to mark dives downloaded from a Uemis SDA
as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Most of the dive computers I have access to don't do the whole surface
event thing at the beginning or the end of the dive, so when you merge
two consecutive dives, you got this odd merged dive where the diver
spent the time in between at a depth of 1.2m or so (whatever the dive
computer "I'm now under water" depth limit happens to be).
Don't do that. Add surface events at the end of the first dive to be
merged, and the beginning of the second one, so that the time in between
dives is properly marked as being at the surface.
The logic for "time in between dives" is a bit iffy - it's "more than 60
seconds with no samples". If somebody has dive computers with samples
more than 60 seconds apart, this will break and we may have to revisit
the logic. But dang, that's some seriously broken sample rate.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will hopefully not be something we need often, but if we improve
support for a divecomputer (either in libdivecomputer or in our native
Uemis code or even in the way we handle (and potentially discard) events),
then it is extremely useful to be able to say "re-download things
from the divecomputer and for things that were not edited in Subsurface,
don't try to merge the data (which gives BAD results if for example you
fixed a bug in the depth calculation in libdivecomputer) but instead
simply take the samples, the events and some of the other unedited data
straight from the download".
This commit implements just that - a "force download" checkbox in the
download dialog that makes us reimport all dives from the dive computer,
even the ones we already have, and an "always prefer downloaded dive"
checkbox that then tells Subsurface not to merge but simply to take the
data from the downloaded dive - without overwriting the things we have
already edited in Subsurface (like location, buddy, equipment, etc).
This, as a precaution, refuses to merge dives that don't have identical
start times. So if you have edited the date / time of a dive or if you
have previously merged your dive with a different dive computer (and
therefore modified samples and events) you are out of luck.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This just makes sure that the merged dive is properly selected, and
that we've saved the trip tree state so that the dive list repaints
nicely and with the newly merged dive selected after the merge.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This introduces the notion of merging two disjoint dives: you can select
two dives from the dive list, and if the selection is exactly two dives,
and they are adjacent (and share the same dive trip), we support the
notion of merging the dives into one dive.
The most common reason for this is an extended surface event, which made
the dive computer decide that the dive was ended, but maybe you were
just waiting for a buddy or a student at the surface, and you want to
stitch together two dives into one.
There are still details to be sorted out: my Suunto dive computers don't
actually do surface samples at the beginning or end of the dive, so when
you stitch two dives together, the profile ends up being this odd "a
couple of feet under water between the two parts of the dive" thing.
But that's an independent thing from the actual merging logic, and I'll
work on that separately.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This just re-organizes the dive merging code so that we expose a new
"merge_dives(a, b, offset)" function that merges two dives together into
one with the samples (and events) of 'b' at the specified offset after
'a'.
We'll want to use this if a dive computer has decided that the dive
ended (due to a pause at the surface), but we really want to just turn
the two computer dives into one long one with an extended surface swim.
No functional changes, but some independent cleanups due to the trip
simplifications.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't change any of the samples, we just don't plot (or consider for
dive time / mean calculations) the samples at the beginning or end of the
dive that are less than a certain threshold under water. Right now that's
an arbitrary 75cm which seems to Do The Right Thing(tm) for the dives I
tried this with - but I'm happy to look at other values if this causes
problems for people with dive computers I do not have access to.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add the bookmark and heading events to the list of events not to be
simplified just because they are redundant - in both cases they are
about the user doing something explicit (like the gaschange), so even
if the data is otherwise identical, they should likely be saved.
That said, both events are kind of pointless (we don't actually seem
to save the heading value for the heading events, and bookmarks are
universally just due to user error in at least my case). But still..
This overly aggressive filtering was introduced in commit 6ad73a8f04
("Improve logic handling events").
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a couple of helper functions to manage dive trips
("add_dive_to_trip()" and "remove_dive_from_trip()") and makes those
functions do the trip statistics maintenance (trip beginning times,
number of dives, etc).
This was needed because the dive merge cases for multiple dive
computers showed some rather nasty special cases: especially if the
new dive information has been loaded into an XML file with trips
auto-generated, merging several of these kinds of xml files with
multiple dives in several overlapping trips would completely confuse
our previous code.
In particular, auto-generated trips that had the exact same date as
previous trips (because they were generated from the same dive
computer) really confused the code that used the trip timestamp to
manage the trips.
Adding the helper functions allows us to get the general case right
without having to have each piece of code that handles trip
information having to bother about all the odd rules. It will
eventually also allow us to make the dive trip data structures more
logical: right now the dive trip list is largely designed around the
odd gtk model handling, rather than some more higher-level conceptual
relationship with the actual dives.
But for now, this keeps all the data structures unchanged, and just
modifies them using the new helper functions.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This requires a patched libdivecomputer that can return salinity of the
water the dive was conducted in. Experimental patches exist that implement
this for the OSTC. The code is designed so that it simply defaults to salt
water if libdivecomputer doesn't include the feature.
The patch also fixes the dive merge code to merge two other recent
additions to the dive structure (surface_pressure and visibility).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we merge dives where the samples have come from different dive
computers, the samples may be offset from each other due to the dive
computers not having decided that the dive starts at quite the same
time.
For example, some dive computers may take a while to wake up when
submerged, or there may be differences in exactly when the dive
computer decides that a dive has started. Different computers tend to
have different depths that they consider the start of a real dive.
So when we merge two dives, look for differences in the sample data,
and search for the sample time offset that minimizes the differences
(logic: minimize the sum-of-square of the depth differences over a
two-minute window at the start of the dive).
This still doesn't really result in perfect merges, since different
computers will give slightly different values anyway, but it improves
the dive merging noticeably. To the point that this seems to have
found a bug in our Uemis data import (it looks like the Uemis importer
does an incorrect saltwater pressure conversion, and the data is
actually in centimeter, not in pressure).
So there is room for improvement, but this is at least a reasonable
approximation and starting point.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This enables plotting the ceiling in deco dives and also adds the
necessary code to the uemis importer. The only other dive computer this
has been tested with the OSTC and that needs a libdivecomputer patch in
order to provide the deco/ceiling information to Subsurface.
Fixes#5
We now throw away redundant events, just as we throw away other redundant
data coming from the dive computer. Events are considered redundant if
they are less than 61 seconds apart and identical.
This also improves the display of the remaining events in the profile as
we now show the value of the event, if it is present (for example for a
deco event we show the duration of the deepest stop).
Finally, for events that define a range (so they set the beginning flag
and assume and end flag some time later) we no loger show the triangle but
assume that some other code handles visualizing them (as happens for the
ceiling events).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used to have very spotty logic for picking the dive trip when
merging two dives. It turns out that that spotty logic almost never
really matters, because in practice you'll never hit the situation of
merging two dives with different dive trips, but it *can* happen.
In particular, it happens when you use multiple dive computers, and
end up loading the dives from one computer on top of the dives of your
other computer. If the clocks of the dive computers was set
sufficiently close to each other, the dive merging logic will kick in
and you may now have slightly different times for the dives that get
merged, and the trip merging logic got *really* confused.
The trip management also depends on the trip dates being updated
correctly when the dives associated with a trip are updated (whether
added or removed), and the trip merging code did none of that.
This fixes it all up. Hopefully correctly.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I just tried downloading some duplicate dives I had on my second dive
computer, and it all "just worked" and subsurface merged them for me.
Almost perfectly.
I say "almost", because in merging them, it threw my old weightsystem
data away, due to that not being merged.
Also, it was a perfect merge only because the computers are so similar
that they just line everything up - same water activation logic, same
sample interval, same pretty much everything. So while I know the
sample merging is not really the right thing to do (it was designed to
get the "merge the exact same dive from the same computer" case
right), it worked well enough for this particular case. I'll look at
something better later.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
get_pressure_units() and get_volume_units() should
return localized strings.
[Dirk Hohndel: updated to use the correct macro]
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is just the first step - convert the string literals, try to catch
all the places where this isn't possible and the program needs to convert
string constants at runtime (those are the N_ macros).
Add a very rough first German localization so I can at least test what I
have done. Seriously, I have never used a localized OS, so I am certain
that I have many of the 'standard' translations wrong. Someone please take
over :-)
Major issues with this:
- right now it hardcodes the search path for the message catalog to be
./locale - that's of course bogus, but it works well while doing initial
testing. Once the tooling support is there we just should use the OS
default.
- even though de_DE defaults to ISO-8859-15 (or ISO-8859-1 - the internets
can't seem to agree) I went with UTF-8 as that is what Gtk appears to
want to use internally. ISO-8859-15 encoded .mo files create funny
looking artefacts instead of Umlaute.
- no support at all in the Makefile - I was hoping someone with more
experience in how to best set this up would contribute a good set of
Makefile rules - likely this will help fix the first issue in that it
will also install the .mo file(s) in the correct place(s)
For now simply run
msgfmt -c -o subsurface.mo deutsch.po
to create the subsurface.mo file and then move it to
./locale/de_DE.UTF-8/LC_MESSAGES/subsurface.mo
If you make changes to the sources and need to add new strings to be
translated, this is what seems to work (again, should be tooled through
the Makefile):
xgettext -o subsurface-new.pot -s -k_ -kN_ --add-comments="++GETTEXT" *.c
msgmerge -s -U po/deutsch.po subsurface-new.pot
If you do this PLEASE do one commit that just has the new msgid as
changes in line numbers create a TON of diff-noise. Do changes to
translations in a SEPARATE commit.
- no testing at all on Windows or Mac
It builds on Windows :-)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In dive.c:fixup_dive() it would be better to call functions
like add_people() and add_location() before the possible return
in the "if (end < 0)" branch.
This prevents a partial auto-complete list in "Dive Info"
combo boxes.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This introduces a new data structure for dive trips - reuseing the struct
dive just got way too messy.
The dive_trip_t datastructure now allows the code to remember if the trip
was auto generated or if its time stamp changed when dives where added to
the trip during auto generation.
The algorithm also distinguishes between dives that were intentionally
added to a trip (either in an XML file or by adding them to trip in the
UI) and dives that were added to trips via autogen. Saving dives that were
added to trips via autogen makes that assignment "intentional".
With this partial rewrite several of the oddities of the old code should
be resolved - especially turning autogen on and off again should get the
divelist back to the previous stage.
Also, when dives are merged during file open or import we now try to pick
the correct tripflag (instead of just ignoring the tripflag completely and
resetting it to TF_NONE by mistake).
Finally, the dive trip debugging code got more verbose and is trying
harder to detect issues at the earliest time possible.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Thanks to Christian for running the static code analysis tool against
subsurface...
There were some false positives, a few style issues that I'll ignore for
now, and two actual potential bugs.
First: Don't check unsigned variables for < 0
This has been around for a while and we are lucky that while technically a
bug it still works as expected. Passing a negative idx simply turns it
into a very large unsigned integer which then fails the > dive_table.nr
test. So it still gets a NULL returned. A bug? Yes. Critical? No.
Mismatched allocation and free
This is an actual bug that potentially could cause issues. We allocate
memory with malloc and free it with g_free. Not good.
Reported-by: Cristian Ionescu-Idbohrn <cristian.ionescu-idbohrn@axis.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Freedives can easily exceed the assumed ascent/descent rate, which
results in wacky dive profiles. Add a check to make the ascent and
descent fit within the duration of the dive.
This fixes the case of the dive duration being zero, or being shorter
than the assumed ascent/descent time.
Reported-by: Lutz Vieweg <lvml@5t9.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull miscellaneous fixes, mostly UI stuff from Mikko Rasa.
Both this and the pull from Pierre-Yves Chibon created a "Save As" menu
entry and logic. As a result, there were a fair number of conflicts,
but I tried to make the end result somewhat reasonable. I might have
missed some semantic conflict, though.
Series-acked-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
* 'misc-fixes' of git://github.com/DataBeaver/subsurface:
Add a separate "Save as" entry to the menu
Changes to menu icons
Improved depth info for dives without samples
Divide the panes evenly in view_three
For simplicity and shortness, throughout subsurface exposure protection is
simply referred to as "suit".
Add the fields to the data structures, add the column to the dive_list
and the preferences dialog (once again with it being turned invisible by
default). Support loading and saving of the suit information.
Display the suit information in the Dive Info pane (this may be a bit
controversial as people could argue this should be in the Equipment pane)
and allow editing of the suit info, with our usual support for completion
and drop down lists to pick from.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the total weight carried on the dive in different weight systems
to the divelist. The column is by default not shown, which can be changed
in the preferences. The column is sortable.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was simply an omission in the current implementation. All the
plumbing was there but never got hooked up with the fixup_dive function as
intended.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This calculates a mean depth for the dive with a fixed ascent/descent
rate and an assumption that all of the bottom time is at the maximum
depth. It's not much, but it allows some derived values such as SAC to
make more sense.
The depth profile for such dives is now also generated with the same
assumptions instead of putting the samples at fixed percentages of the
dive duration.
Signed-off-by: Mikko Rasa <tdb@tdb.fi>
Right now we do certain cylinder info operations only when importing
from an XML file, which is wrong. In particular, we do the "is the
gasmix air" or "what is the standard cylinder name" only at XML read
time, which means that if you import a dive directly from the dive
computer, it won't have the air sanitization or the proper default
cylinder names.
Of course, most dive computers don't actually save enough cylinder
information for us to do the cylinder name lookup anyway, but some do.
And all Nitrox-capable dive computers do have that O2 percentage that
needs cleanup too.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This works ok-ish, but doesn't allow us to click on the stars and edit
them in the divelist, which a user might expect to be able to do - in
most "star rating UIs" you simply click on the n-th star to set that
rating. Here you need to edit the dive and pick the rating from a drop
down menu.
Minor oddity: you can actually (if you force it) write anything you want
into the star rating. But anything that isn't one of the predefined
strings simply results in a zero star rating.
Overall the UI feels a bit... forced. But I think this is quite useful
anyway.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I've seen at least DivingLog do this. If you manually enter beginning and
end pressure for a tank it will either linearize the samples in between or
offer to simulate a dive (with constant SAC rate). At least the first case
is reasonably easy to detect. We throw out those samples and ensure that
we still have valid beginning and end pressure for that dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
At least the Suunto pressure transmitter seems to be pretty
"quantisized", and it will send identical samples for a while until the
pressure changes enough. Then subsurface gives this silly flat line
with a sudden jump downwards, which *could* be you suddenly taking a
deep breath after holding it for a while, but almost certainly it's a
sensor issue.
So just remove successive identical pressure readings. They aren't
interesting, and subsurface will actually do a good job of interpolating
it according to SAC rate instead. And they just make the XML look
worse.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This makes it consider them to be identical if they are within half a
bar of each other. If you edit the pressures by hand and set them to
the same bar pressure as the samples, they may not be identical to the
last milli-bar, but clearly the manually entered cylinder pressure isn't
significantly different from the sample data, so consider it redundant.
We do want manual overrides of cylinder pressures to take precedence
over sample data (as Dirk so eloquently puts it, some dive computers
really don't have very reliable sample data), but at the same time the
sample data is the one we are expecting to be fairly accurate. The
starting and ending pressure overrides are for when there is no sample
data, or when the sample data is totally wrong for some reason.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Keep the sample pressure start/end data separate from the overall
cylinder start/end data - and clean the overall cylinder start/end data
if it matches the samples exactly to avoid the redundancy.
This breaks all the SAC calculations etc, which expect the cylinder
pressures to always be in the cylinder data. I'll fix that up
separately.
The reason for this is that we really want to keep the manually entered
data separate: the pressure plotting doesn't need the confusion, and
considers end-point data (with interpolation) very different from sample
data. Also, we do not want to pollute the xml save-file with data that
is computed.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Finally getting more consistent overall in how we convert between the
different units and how we decide which units to display.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Treat SAC and OTU consistently:
- SAC is now a member of struct dive
- it's calculated / populated at the same time with a helper function with
consistent API
Create get_volume_units function that returns volumes (e.g. used in SAC
rates) based on preferred units - make sure we have these conversions just
once in the code.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Designed along the lines of get_depth_units - except we don't define a
specific number of digits to show.
Use this in the one spot we need it right now in profile.c
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
First step to being able to filter the events that we display in the
profile. We could (in theory) walk all the dives in the divelist when we
need this data, but it seems much more convenient to have them in an array
in one place.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way you can just type the first few characters of a location you've
been to before, and it will show you a list of possible completions.
Same for buddies and divemasters (which take the completions from a list
of people you've used before).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This way the cylinder model list will contain all the different
cylinders that we have ever seen, rather than only containing the models
that we have *edited*.
That makes it much more practical to add new dives with the same
cylinders that we've used before, because now those cylinders will show
up as cylinder models even if we haven't looked and edited the old dives
first.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If we have en explicit end pressure in the dive information, we should
not change it just because we also have some samples. The sample data
may not be complete (read: "Linus wireless connection dropped during the
dive again, and he fixed up the end pressure manually afterwards").
The beginning pressure already works correctly, because it will only use
the sample data for the first sample if no pressure existed before.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Depending on the tool used to import a dive from the uemis Zurich we end
up with different time stamps for the dive - just by a few seconds, but
the existing code insisted on an exact match.
We now allow for up to 60 seconds in difference and still consider two
dives as the same.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
At first glance it seems logical to make the ending pressure be the
lowest pressure observed during a dive. But if you do valve shut down
drills with a tech setup (where you have a fully redundant double
tank setup with two valves, two regulators and a manifold in between),
then you continue to breath from what is indeed the same "tank", but still
the valve on which your air pressure transmitter sits does get shut down
and de-pressurized. So your pressure goes down by quite a bit, and then
comes back up when the valve is turned back on.
And the ending pressure of the dive (which is used for things like the SAC
calculation) is indeed potentially higher than the lowest pressure
observed during a dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When merging two identical dives and one of them has lat/long data, pick
it up correctly for the merged dive.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Parse them, save them, take them from libdivecomputer.
This doesn't merge them or show them in the profile yet, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The following are UI toolkit specific:
gtk-gui.c - overall layout, main window of the UI
divelist.c - list of dives subsurface maintains
equipment.c - equipment / tank information for each dive
info.c - detailed dive info
print.c - printing
The rest is independent of the UI:
main.c i - program frame
dive.c i - creates and maintaines the internal dive list structure
libdivecomputer.c
uemis.c
parse-xml.c
save-xml.c - interface with dive computers and the XML files
profile.c - creates the data for the profile and draws it using cairo
This commit should contain NO functional changes, just moving code around
and a couple of minor abstractions.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
.. without the actual text, because I'm a "random plots that cannot
actually be interpreted" kind of guy.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We're going to start to want to allocate dives and samples for the
libdivecomputer import too, so let's clean things up a bit for that.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
libdivecomputer already uses 'gasmix_t' for its own gasmix thing. I
don't like th eway we step on each others name spaces, but hey, might as
well just use 'struct gasmix' and avoid the typedef.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Doing per-dive cylinder start/end pressures is insane, when we can have
up to eight cylinders. The cylinder start/end pressure cannot be per
dive, it needs to be per cylinder.
This makes the save format cleaner too, we have all the cylinder data in
just one place.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We don't want to override potentially more exact values for water
temperature etc either. The sample save interval may be longer than
some internally kept state of key per-dive values like that.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
.. and sort based on the 'time_t' value itself.
This allows us to use a more compact date format that doesn't need to
sort alphabetically, because sorting by date is always based on the date
value. So we can use just a two-digit year, and skip the seconds, to
keep the column narrow, while still sorting correctly.
Also, "Depth" is a nice header string, but it is wider than the column
itself, which makes the whole column wider than necessary. So put the
units in the header instead of in the string, keeping things narrow.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'compiler-warning' of https://github.com/nathansamson/diveclog:
Removed the unused startemp and enttemp calculations. This fixes a compiler warning too.
Fix up trivial conflict in dive.c due to the temperature simplification
(commit 9961c7f89c: "Remove redundant temperature readings").
I'm aiming to really differentiate in dive log software by making my XML
export files be *clean*, dammit.
That means that we don't have random names, we don't have crazy random
units, and we don't have redundant information.
So when the temperature doesn't change, just don't report it. That's
already what "no sample" means, just clean things up.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of just tracking gasmix, track the size and workng pressure of
the cylinder too.
And use "cylinder" instead of "tank" throughout.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The computer may track "real" max depth more closely than it tracks
samples. So we trust the non-computed mean/max depths more than the
computed ones.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now the dive profile plot *really* needs some units. The pressure is
just a random line otherwise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>