This is disabled by default - but when compiled in it makes it a lot
easier to pinpoint why we are creating so many DiveObjectHelpers.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The planner has a computeVariations() function that can be run
in a worker thread. The code was not thread safe: a deco_state
object allocated on the stack of the caller was passed down to
the worker thread. It's well possible that the object would go
out of scope before the thread run.
Therefore, when running in the background, copy the object first
and free it in the worker thread.
Side note: Qt makes proper memory management again as difficult
as possible: You can't pass a std::unique_ptr<> to QtConcurrent::run,
because move-only objects are not supported. Not very friendly!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It is clear why this wasn't caught in my testing, but the bug should
have been really obvious simply reading through the code.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since requiring Qt >= 5.9.1, we can use the pointer-to-member-function
overloads of addAction (introduced in Qt 5.6). This has the advantage
of compile-time checking of the signal/slot parameters.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is incredibly brute force, downloading a 3+GB installer and
installing all of the Qt/iOS binaries.
This first attempt is mainly to get an idea how long this will take and
if this will fit within the size constraints of the build VM. This
commit doesn't even try to build, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
No artifacts from this build are preserved, this is just to make sure
that we can still build the desktop version against Qt 5.9.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This so far just works on push and hopefullt pull requests, not for tags
and therefore actual releases.
In order not to conflict with the binaries from Travis, I changed the
name to "ci-release" instead of "continuous".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The AppImage works - I just need to figure out how to post releases. For now
it'a available on the Actions page as Artifact.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This feature is in beta right now and might change without notice, but instead
of dealing with the broken Travis Mac builds, this does seem progress.
The build artifact seems to work, but it's a bit more painful to get to. Go to
https://github.com/Subsurface-divelog/subsurface/actions and click on the
corresponding run - it's then in the top right corner under Artifacts. The one
oddity is that after unzipping the file you need to manually make
Contents/MacOS/Subsurface executable.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also make sure Grantlee still compiles with Qt 5.13 by cherry picking a commit
that was added after the v5.1.0 release.
In order to identify this commit as comming from the build automation we
temporarily override the user name and email address. As a side effect this
also makes this work on Travis.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the user taps on a TextField to enter text, usually the virtual
keyboard will pop up. This code tries to ensure that the keyboard
doesn't cover the entry field that the user was trying to work on.
In order to centralize these changes, this introduces a new
SsrfTextField type which we use to also remove a few redundant default
settings that we previously had for every field. The one TextArea for
the Notes field didn't seem worth creating yet another type for, so
there the changes are done directly in DiveDetailsEdit.
The awkward timer mechanism is necessary as the keyboard pops up
asynchronously and then triggers a change of height for the app, so we
need to wait a little bit before doing the adjustment.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QML has ways to style icons - and we use that for the main theme color,
but it doesn't seem to work (anymore?) for the edit and save icons.
Instead of tracking down what changed there, simply switch between icons
with different foreground color, depending on theme.
All the other icons seem to work well in all three themes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is one of the side effects of switching to Kirigami 5.62 - but since
we build our mobile versions with Qt 5.12 and Qt 5.13, this really isn't
an issue.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This reverts commit 60e63afb82.
I merged this to early without paying attention to the fact that this
needed an updated build container as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While on mobile there should always be only one selected dive, it's very
cheap to make sure that amount_selected is tracked correctly. The
incrementing of amount_selected is done in case an invalid id is passed
in.
Suggested-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When switching to the global tool bar this was lost, and then it turned
out to be broken and required more patches to fix.
Commented out because it doesn't work at all.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way we'll get a working back icon on Android and also correct font
size for the (translated) Back text.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Kirigami isn't picking up our font for the Back entry in sub menus.
Also, we still don't get a back button icon on Android. This will
allow us to work around that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This looks extremely fishy to me, but it does seem sufficient to
get the forward and backward buttons to show up in the toolbar.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Whatever I try, the toolbar background is always based on the 'active'
color set in qtquickcontrols2.conf, not on anything that I can set in
QML code. So in an effort to brute-force the issue, this hardcodes the
subsurfaceTheme value in the toolbar UI code of Kirigami.
To make this easier, this (and one of the other hacks) is added to the
existing kirigami.diff.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previously if the dive was in a different trip, we'd scroll to that trip
but not expand the trip, which was a confusing user experience.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While pageStack.push() can handle pushing a page that's already there,
that creates an unfortunate sequence of currentItemChanged signal which
leads us to do the wrong thing with our map hack.
This commit changes things around to first look for the page in the page
stack and just switch to it, and only pushing the page as new if it
cannoot be found oon the page stack.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QML enums are a bit painful to use, so this uses poor man's emums
instead.
Basically what this changes is that a forced switch to the map doesn't
count as picking the map. That seems obviously correct, as otherwise you
could end up in a situation where a legitimate switch away from the map
is ignored.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes no sense and seems crazy. But it also seems to work,
For some reason with the current Kirigami version and Qt 5.13.1
selecting the map page makes the pageStack jump back to the previous
page right away. I cannot find what triggers this behavior.
Since I cannot fix the root cause, I am working around the bug. When we
select the map page we remember that fact and when a different page is
picked with the mapPage being the last page on the stack, we force the
page selection back to the map page. I can imagine countless ways in
which this could go horribly wrong - but right now I can't figure out a
better solution.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There doesn't appear to be a reason to pop all of the existing pages from the stack.
Just on principle, only close the drawer if it was open.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This had very strange results with the current Kirigami.
Instead set the width of those pages based on our overall column width.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old calculation was clearly bogus, we'd also get zero columns here.
Instead do a correct calculation of the number of columns and make the
resulting column width a property of the rootItem so we can refer to it
elsewhere.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The hack to remove the action button caused situations where the action
button didn't return. Let's skip that for now. All the other fixes
appear to still be needed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove hidapi from manually built components and use the mxe based one instead.
Remove libzip as that is handled by mxe packages.
Update version of grantlee used to build with qt 5.13.1.
Also hide vscode files from git.
[Dirk Hohndel: combined two commits, cleaned up the commit message and removed
one now incorrect comment line from mxe-based-build.sh]
Signed-off-by: Paul Buxton <paulbuxton.mail@googlemail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
