Remove the existing gas change events @0:00 when new
one is added @0:00.
Signed-off-by: Yousef Hamza <jo.adam.93@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
some photos can be missing due to permission issues during exporting.
There are 3 cases:
-All photos are missing, the photo view must disapear.
-Some photos are missing, these photos must not be shown.
-No missing photos, all the photos must be viewed.
at loading try to get all the existing photos by GET. missing photos
must be marked for later removal. After all asynchronous GET requests
are received, remove all missing photos then finally show them all.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Report start cylinder pressure from the samples with empty value.
Must search for the first nonzero value.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Value of He must be showed in trimix dives, also fixes the format of the
dive events table. Gas change should be something like O2: 50 - He 0
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When zoomed in, things like moving planner points is not possible,
but if the user attempts that, replan() -> plotDive() is called
and the zoomLevel should be reset to the default value (we don't
really want that), but instead it's lost for some reason
(as the user reports: "Somes times, it changes to 100% which is ok").
If moving points becomes possible eventually while zoomed in,
we need to figure a way to replot without resetting the zoom level
in plotDive().
Fixes#851
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In practice this will sanitize Windows line terminations (discard the
carriage return);
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This function was missing the check if setting that field actually changes
what's already in the data structure.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This may seem much more complicated but actually is much cleaner. Add each
thread we start to the list of future results and add a new UI function
that updates the UI once all of the threads have finished.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Sequentially parses a file, expected to be a Datatrak/WLog divelog, and
converts the dive info into Subsurface's dive structure.
As my first DC, back in 90s, was an Aladin Air X, the obvious choice of log
software was DTrak (Win version). After using it for some time we moved to WLog
(shareware software more user friendly than Dtrak, printing capable, and still
better, it runs under wine, which, as linux user, was definitive for me). Then,
some years later, my last Aladin died and I moved to an OSTC, forcing me to
look for a software that support this DC.
I found JDivelog which was capable of import Dtrak logs and used it for some
time until discovered Subsurface existence and devoted to it.
The fact was that importing Dtrak dives in JDivelog and then re-importing them
in Subsurface caused a significant data loss (mainly in the profile events and
alarms) and weird location of some other info in the dive notes (mostly tag
items in the original Dtrak software). This situation can't actually be solved
with tools like divelogs.de which causes similar if no greater data loss.
Although this won't be a core feature for Subsurface, I expect it can be useful
for some other divers as has been for me.
Comments and issues:
Datatrak/Wlog files include a lot of diving data which are not directly
supported in Subsurface, in these cases we choose mostly to use "tags".
The lack of some important info in Datatrak archives (e.g. tank's initial
pressure) forces us to do some arbitrary assumptions (e.g. initial pressure =
200 bar).
There might be archives coming directly from old DOS days, as first versions
of Datatrak run on that OS; they were coded CP437 or CP850, while dive logs
coming from Win versions seems to be coded CP1252. Finally, Wlog seems to use a
mixed confusing style. Program directly converts some of the old encoded chars
to iso8859 but is expected there be some issues with non alphabetic chars, e.g.
"ª".
There are two text fields: "Other activities" and "Dive notes", both limited to
256 char size. We have merged them in Subsurface's "Dive Notes" although the
first one could be "tagged", but we're unsure that the user had filled it in
a tag friendly way.
WLog adds some information to the dive and lets the user to write more than
256 chars notes. This is achieved, while keeping compatibility with DTrak
divelogs, by adding a complementary file named equally as the .log file and
with .add extension where all this info is stored. We have, still, not worked
with this complementary files.
This work is based on the paper referenced in butracker #194 which has some
errors (e.g. beginning of log and beginning of dive are changed) and a lot of
bytes of unknown meaning. Example.log shows, at least, one more byte than those
referred in the paper for the O2 Aladin computer, this could be a byte referred
to the use of SCR but the lack of an OC dive with O2 computer makes impossible
for us to compare.
The only way we have figured out to distinguish a priori between SCR and non
SCR dives with O2 computers is that the dives are tagged with a "rebreather"
tag. Obviously this is not a very trusty way of doing things. In SCR dives,
the O2% in mix means, probably, the maximum O2% in the circuit, not the O2%
of the EAN mix in the tanks, which would be unknown in this case.
The list of DCs related in bug #194 paper seems incomplete, we have added
one or two from WLog and discarded those which are known to exist but whose
model is unknown, grouping them under the imaginative name of "unknown". The
list can easily be increased in the future if we ever know the models
identifiers.
BTW, in Example.log, 0x00 identifier is used for some DC dives and from my own
divelogs is inferred that 0x00 is used for manually entered dives, this could
easily be an error in Example.log coming from a preproduction DC model.
Example.log which is shipped in datatrak package is included in dives
directory for testing pourposes.
[Dirk Hohndel: some small cleanups, merged with latest master, support
divesites, remove the pointless memset() before free() calls
add to cmake build]
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code is the same that is used on the MainTab, but
since they are different objects, I can't just call it.
so I'm duplicating them for the time being.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code used to trigger the edit mode a long time ago
since now I'm re-reading the code to implement the
same stuff on the Location edit mode, I realized that
this is not needed anymore.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Over one year ago i started with a crazy idea, "Wouldn't Subsurface on
android be nice?" when i read about Android support in Qt.
After playing around with it and doing some quite ugly hacks i got it to
build and run.
Now are all the patches upstream and this imports the quite crude build
script, for others to continue on.
This is a squash-import of what have have happened in
https://github.com/glance-/subsurface-android during 2014.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
CC: Joseph W. Joshua <joejoshw@gmail.com>
CC: Venkatesh Shukla <venkatesh.shukla.eee11@iitbhu.ac.in>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When using gasmixes where the difference is less than 2% the planner can't
caclulate casconsumptions correctly. This sets the minimum gasdifference
to 1%.
Fixes#795
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Back in 4867ee8ad8 ("Move the Profile out
of the mainwindow.ui") the way to access the PlannerDetails object
changed.
This does the corresponding change to the NO_PRINTING block, making it
build on Android again.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we do not currently handle buddy pressure properly, let's just
ignore that information for now. Unfortunately, this information is lost
in this case, but if we include it, the pressure graph is going to be
bogus.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Without the patch, there is a crash if the dive does not have a
location.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As we now have the logic that there is always an explicit setpoint at
t=0sec for CCR dives, also the planner should honor that.
This fixes a bug that when planning a CCR dive we later add a
setpoint change this influenced the ceiling _before_ the
setpoint change.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Expand the undo feature by storing a list of renumbered dives' ids
and numbers so that the original numbers can be restored if needed.
Signed-off-by: Grace Karanja <gracie.karanja89@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add Max. Depth feild to the expanded and main dive views.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is another long operation that needs showing a notification about
importing the old format log files
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Showing an Error message is better called from the Notification Object,
So for consistency old references to showError is replaced by calling
the notification object.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The main error message bar can be used to show exporting information and
other notification.
So a new Notification handler object is created in the main window
<NotificationWidget> that inherits <KMessageWidget> that shows different
type of notifications, ex. (Warning, Error and information)
Also this class contains a QFutureWatcher object that is set to handle
the QFuture variable returned from the exporting thread. this will allow
the UI to be updated when the thread finishes execution.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This addes a menu entry for the user to select a directory that is recursively
traversed to look for image files and compute the hashes of those images (for
those images to be available to be displayed in dives according to their hash values).
This traversal and hash computation happens in and independend thread and so far
the only feedback to the user is that upon completion the dispayed images are updated.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Upon successfull reading an image file, this computes a SHA1 hash of the
image and saves it with the picture tag in the log file. When a file is
not successfully loaded (for example because the log was created on a
different computer) we look up the hash in a dictionary that maps hashes
to local file names.
That dictionary (actually two for both directions), is loaded on startup
and saved upon destruction of the main window.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
qt-gui.cpp:44:2: error: incomplete type 'QTextCodec' used
in nested name specifier
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is somewhat invasive as aborting the XML file read requires us to
report things up the recursive parsing chain.
What we really need to do here is to ask the user how they want to use the
data from reverse geo lookup. But for now we only warn about the fact that
this can take a while.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fixed the icon problem Dirk found.
We really should choose between qmake and cmake. I wouldn't care about
cmake if qmake was building the UTs...
From 8eeea28a523fd6ef588d81b82ab904d4512b3d7a Mon Sep 17 00:00:00 2001
From: Patrick Valsecchi <patrick@thus.ch>
Date: Tue, 24 Feb 2015 09:06:37 +0100
Subject: [PATCH 3/3] Cmake build now contains icons
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Ubuntu has git minor version 20 which has less parameters in
git-remote-fetch.
From ac9516984e4fbc787635b0dfd76649c8e43fab83 Mon Sep 17 00:00:00 2001
From: Patrick Valsecchi <patrick@thus.ch>
Date: Tue, 24 Feb 2015 08:45:21 +0100
Subject: [PATCH 2/2] Fix Ubuntu compilation error.
Ubuntu has git minor version 20 which has less parameters in
git-remote-fetch.
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Non parallel build was broken because qthelper.cpp was depending
indirectly on a QT generated file and no cmake dependency was enforcing
the file to be generated before. I've removed the not needed #include
that was introducing this dependency.
In cmake, {FOO STREQUAL ""} is TRUE only if FOO is defined and
empty. Fixed a couple of bad usages.
Made the required libraries actually required in cmake.
From ef5ab90f258c5754d3022a023c28050cbafed3d5 Mon Sep 17 00:00:00 2001
From: Patrick Valsecchi <patrick@thus.ch>
Date: Tue, 24 Feb 2015 08:38:49 +0100
Subject: [PATCH 1/2] Fixed cmake build.
Non parallel build was broken because qthelper.cpp was depending
indirectly on a QT generated file and no cmake dependency was enforcing
the file to be generated before. I've removed the not needed #include
that was introducing this dependency.
In cmake, {FOO STREQUAL ""} is TRUE only if FOO is defined and
empty. Fixed a couple of bad usages.
Made the required libraries actually required in cmake.
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had a ton of helper functions in qt-gui.cpp which really didn't make
much sense. So I moved them all into qthelper.cpp.
Also moved the UserAgent helper that didn't belong in the UpdateHandler to
begin with - that's a generic helper used in many places...
With this we can successfully build using cmake again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As requested in the user forum and in the mailing list, now support:
- 46.473881 6.784696 (format used in XML files)
- 48 51.491n 2 17.677e
I was not able to handle the XML format in a generic way without making
the code too ugly. So I've added an exception.
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Note that I use the serial number as device ID as is done with the
Suunto DM5 import.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
