In 2021035cfc a bug was introduced:
currentTrip of MainTab was not set in trip mode. Thus, when editing
the trip notes, the notes of all selected dives were edited instead.
Set the member variable and not a local variable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To check wether the tab widgets should show the trip view, they called
the selectedTrips() function. The trip view was shown if that contained
only one trip. However, the selectedTrips() function was very slow,
because it has to query to core models.
Change the function to singleSelectedTrip(), which returns a trip
if there is exactly one trip selected. The function returns early
if there is more than one trip selected. This makes the select-all
case much faster.
There are two cases which are still very slow:
- List mode, because here all top-level items are queried.
- Dive log with many only top-level items.
Ultimately, we will have to cache the trip selection because
querying the model is too slow.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was only one editMode left (MANUALLY_ADDED_DIVE).
Therefore replace by a flag. This makes the code more consistent,
because the conditions "editMode != NONE" and "editMode ==
MANUALLY_ADDED_DIVE) actually meant the same thing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The editMode was set to IGNORE_MODE when programatically setting
fields so that we can ignore changed-signals.
That seems to be orthogonal to whether we are in edit mode
and indeed when setting IGNORE_MODE the edit mode was
saved and restored.
Therefore, replace the IGNORE_MODE by an independent ignoreInput
flag.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
All remaining callers were passing MANUALLY_ADDED_DIVE as a new
mode, so we may just as well remove the parameter and thus
simplify the logic.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only way to enter edit mode is to edit the profile. However,
that means that the profile is already visible, so there is no
need to change the mode. Simply remove the EDIT mode.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The edit state is now only used to edit the profile. There is no
reason to disable random tabs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The editing of the dive site is controlled via an undo command.
No point in centering the map when cancelling a profile-edit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This stored the old editMode. However, it was not read after
editMode was changed, so there is no point to it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The "dive is currently" edited is only shown when the profile is
edited. This affects only the current dive and therefore a
message saying that multiple dives are edited makes no sense.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When enableEdition() was called with mode == NONE and the dive
was a manually added dive, it would call into MainWindow::
editCurrentDive(), which would in turn call enableEdition(),
however with another mode. Since the only caller of
enableEdition() is now editCurrentDive() anyway, we can
remove that weird code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since cylinders are now edited using the undo system, these
functions are not needed anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When the dive list is cleared or updated, the entries in the
divesite-model become stale and therefore the divesite-model
(with the actual name LocationInformationModel) also must be
updated. This was done manually in some parts of the code and
forgotten in others. Therefore, do it directly in the clear()
and reset() function of the dive list-model.
This might be a bit of a layering violation: why should one
model call into another if they are not in parent/child
relationship? However, this seems easier than introducing
a global "reset dives" function that coordinates the models.
Moreover, it does not appear 100% safe: if the clearing of
the divesite model causes accesses to the divelist-model,
they happen in the midst of a model reset and we had horrible
bugs with that kind of things. However, I don't think that
should happen.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There are two cases where dive-times are shifted: in an explicit
dialog and when editing the date/time of a dive.
In each of these cases, the selected dives were collected manually.
Instead use the getDiveSelection() function. Since this returns
a std::vector, change the argument of Command::ShiftTime() to
such a std::vector.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These were used to remove warning-icons to mark tabs with user
changes. However these icons haven't been set since commit
a86aca0378.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was used to test whether the "really discard changes?"
message should be shown. However, we now edit weightsystems
directly with undo commands. Therefore, the check is unnecessary
and the whole function can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When accepting changes, the main tab refreshes the display in
a remember/restoreSelection() pair. Since the display refresh
doesn't lose selection, these calls can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since we now have a selection.c translation unit, put the selection-
related functions there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For deterministic construction/destruction (i.e. objects are
destructed in reverse order of construction) it is crucial that
constructor initializer lists follow the order of the class
definition.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Recently, undo of dive-replanning was introduced. Therefore,
it appears logical to do the same thing for editing of the
profile of manually added dives.
For now, use the same undo-command, just change the displayed
text from "replan dive" to "edit profile". Move the fixup dive
call into the undo-command.
Eventually, every action on the profile should be made undoable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the future we might want to use undo-commands for mobile as
well (even if not implementing undo).
Therefore, move the undo-command source from desktop-widgets
to their own commands top-level folder.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently the top righthand part of the notes tab is used for
showing and editing air teperature and water temperature. But
these fields were moved over to the Information tab and are not
required in the Notes tab any more. Rather use this space for the
depth and duration data for manually-entered dives. Currently
extra vertical space is created in the Notes tab for showing this
field, resulting in inefficient use of screen space and
inelegant layout. This code moves the Duration and Depth fields
into the top righthand of the Notes tab.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
1) Reorganise the existing widgets in the Information tab
2) Move divemode widget and visibility widget from Notes tab to
Information tab
3) Translate water density to a word indicating water type
4) Reorganise the Notes tab to compensate for the moving the
divemode and visibility widgets to the Information tab
5) Remove the problems in showing a QGroupBox in Qt Windows. I do
this by removing the CSS specifying border characteristics
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of accessing the cylinder table directly, use the get_cylinder()
function. This gives less unwieldy expressions. But more importantly,
the function does bound checking. This is crucial for now as the code
hasn't be properly audited since the change to arbitrarily sized
cylinder tables. Accesses of invalid cylinder indexes may lead to
silent data-corruption that is sometimes not even noticed by
valgrind. Returning NULL instead of an invalid pointer will make
debugging much easier.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of using fixed size arrays, use a new cylinder_table structure.
The code copies the weightsystem code, but is significantly more complex
because cylinders are such an integral part of the core.
Two functions to access the cylinders were added:
get_cylinder() and get_or_create_cylinder()
The former does a simple array access and supposes that the cylinder
exists. The latter is used by the parser(s) and if a cylinder with
the given id does not exist, cylinders up to that id are generated.
One point will make C programmers cringe: the cylinder structure is
passed by value. This is due to the way the table-macros work. A
refactoring of the table macros is planned. It has to be noted that
the size of a cylinder_t is 64 bytes, i.e. 8 long words on a 64-bit
architecture, so passing on the stack is probably not even significantly
slower than passing as reference.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The ProfileWidget2::recalcCeiling() function is used in one place,
namely when an undo-command changes the mode. It recalculates
decompression data and repaints the ceilings and thus avoids a
full profile-redraw.
This is smart, but it becomes problematic when the dive is changed
and the ceiling is recalculated before the profile is redrawn.
The DivePlotDataModel then still has data from the previous dive
but cylinders of the new dive are accessed.
This kind of situation may arise if multiple dive fields are
updated, as for example when replanning a dive.
Currently, this only causes a temporary mis-calculation. When
removing MAX_CYLINDERS this will lead to crashes.
One might attempt to fix the whole data-dependency mess. This
commit goes the cheap route and simply redraws the profile when
the mode is changed. Yes, it is in a way ineffective, but we
do worse things. The ProfileWidget2::recalcCeiling() thus becomes
unused and is removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The profile repainting code that was called when a dive changed was
located in a separate function. Not only did it take a redundant
parameter, it also performed very weird stuff like entering and
exiting plan state. That did not work at all. Replace by a simple
call to plotDive() and things work much better.
There was a comment about DivePlannerPointsModel and profile
getting out of sync. So let's keep an eye out for that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The divesEdited signal sends the changed field as a parameter.
Since some undo-commands change multiple fields, this led to
numerous signals for a single command. This in turn would lead
to multiple profile-reloads and statistic recalculations.
Therefore, turn the enum into a bitfield. For simplicity,
provide a constructor that takes classical flags and turns
them into the bitfield. This is necessary because C-style
named initialization is only supported on C++20 onward!
Is this somewhat overengineered? Yes, maybe.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To recognize HTML-notes the text was scanned for <div> tags. But
apparently the planner notes do not feature such a thing. Therefore
extend recognition of HTML to <table> tags.
Note we can't use the <html> or <span> tags, because these are
*always* produced by the QTextEdit::toHtml() function.
Fixes#2265
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replaces some enums with names that do not clash with windows #defines.
Specifically:
ERROR -> ERRORED, PASCAL->PASCALS, IGNORE->IGNORED,FLOAT->FLOATVAL
Signed-off-by: Paul Buxton <paulbuxton.mail@googlemail.com>
Move the declarations of the "report_error()" and "set_error_cb()"
functions and the "verbose" variable to errorhelper.h.
Thus, error-reporting translation units don't have to import the
big dive.h header file.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On the main tab, the trip time was not shown when switching to
a trip. Implement showing of the trip date in a function, as the
undo-code will also have to update the trip date in certain
circumstances.
Fixes#2207
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The weightsystem_equal() function compares weightsystems of two dives
to decide whether the "commit changes" message should be shown and
to decide which dives are edited when changing multiple dives.
Due to an index mixup the function returned wrong results for
more than two weightsystems. Fix it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace the fixed-size weightsystem table by a dynamically
relocated table. Reuse the table-macros used in other parts
of the code.
The table stores weightsystem entries, not pointers to
weightsystems. Thus, ownership of the description string is
taken when adding a weightsystem. An extra function adds
a cloned weightsystem at the end of the table.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
per_cylinder_mean_depth() and selected_dives_gas_parts() are used
in the dive-information and statistics tab, respectively. Nevertheless,
these functions are called on the main tab as well and the result is
trashed. Therefore remove the calls. Must have been an artifact.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If no dive is set, all fields except the note field were cleared.
Also clear notes.
Fixes#2172
Reported-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Clearing dive site did not work for two reasons:
1) We didn't get a signal when editing was finished.
2) When clearing the dive site, the "add new dive site" site was set.
Thus, connect to the editingFinished signal and in
DiveLocationLineEdit::currDiveSite() return a null pointer if
the string is empty.
This means that it is not possible to have a dive site with an
empty string, but that shouldn't be a problem, right?
Fixes#2148
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We were shifting in the wrong direction. Which caused the field to be marked as
'edited' again, which meant we shifted the wrong way and twice the distance.
This seems to fix the problem for both date and time editing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the default view is batched by trips, signals were sent trip-wise.
This seemed like a good idea at first, but when more and more parts used
these signals, it became a burden. Therefore push the batching to the
part of the code where it is needed: the trip view.
The divesAdded and divesDeleted are not yet converted, because these
are combined with trip addition/deletion. This should also be detangled,
but not now.
Since the dive-lists were sorted in the processByTrip function, the
dive-list model now does its own sorting. This will have to be
audited.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These functions were spread out over dive.c and divelist.c.
Move them into their own file to make all this a bit less monolithic.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When a different field is edited, hide any old multi-dive-edit
warning message. The reason is that we might want to add an "undo"
button to the message. But this will undo the wrong command if
we don't hide the message.
Sadly, this means that we can't use animated show / hide, because
an animatedHide() followed immediately by an animatedShow() does
not necessarily show the message. In other words, and animatedShow()
does not interupt a started animatedHide()!?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On the MainTab, warn if more than one dive was edited. To this purpose,
add a new KMessageWidget with an "OK" button that closes the message.
Code is mostly a copy of the already existing "Editing dive" message.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
