In commit bd0c99dfb7 (display pO2 and Setpoint for CCR dives)
the choice was made: when CCR than never a temperature graph.
While this seems reasonable, there is small group of mCCR
divers that do not log their po2 digitally, so the only po2
they can display is the setpoint that is reported by the used
DC. As this is a bit of a dull flat line, most of these
divers do not display this. And this leaves room on the
small mobile display for the temperature data.
So effectively: show temperature or po2 graphs.
Suggested-by: Peter Zaal <pzaal@xs4all.nl>
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Commit 810903bdb9 ("Import: pass a dive table to process_imported_dives()")
introduced the variables
struct dive *old_dive, *merged;
into process_imported_dives(), but never used them. It seems to be an
artifact of having split the function to use the try_to_merge_into()
helper function (that has those same variable names and _does_ use
them), but forgetting the original variables from the pre-split case.
Gcc understandably warns about it:
core/divelist.c: In function ‘process_imported_dives’:
core/divelist.c:1351:26: warning: unused variable ‘merged’ [-Wunused-variable]
struct dive *old_dive, *merged;
^~~~~~
core/divelist.c:1351:15: warning: unused variable ‘old_dive’ [-Wunused-variable]
struct dive *old_dive, *merged;
^~~~~~~~
and the trivial fix is to just remove that line that declares the stale
and unused variables.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
bperrybap reported on github that the ftdi timeouts can be excessive:
"the timeout period while waiting for read data to be 10x or even 100x
longer than it should be when there are read issues on the data cable
particularly when using Android and USB OTG cables. i.e. a 5 second
read timeout for not receiving data can be as long as 7 minutes"
and the reason is that the code at one point tried to use the regular
"gettimeofday()" to handle timeouts, but that doesn't exist in Windows.
We already have Windows-specific code to sleep for a number of
milliseconds in "ftdi_serial_sleep()", let's just extend that same
concept and add a "ftdi_serial_get_msec()" that returns the number of
msec's since some arbitrary point in time.
On Windows, that's just "GetTickCount()", and in sane environments it's
just a trivial wrapper around gettimeofday() to turn sec/usec into msec.
NOTE! The actual msec value doesn't have any meaning. Only the
difference between two calls to ftdi_serial_get_msec() is meaningful.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some divecomputer backends (ok, right now really only the Aqualung i770R
and i300C) want to know the bluetooth name of the dive computer they
connect to, because the name contains identifying information like the
serial number.
This just adds the support for that to our Qt BLE code.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
More specifically, don't upload them from the old Windows build - we
just keep that one around for the smtk2ssrf binaries. The Subsurface
binaries are now created in the container based Windows build.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This still doesn't seem to work as expected and needs more testing.
Also, it can be turned off via command line argument
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I expect this to become the default way to test Windows builds and
create installers on Travis. The idea is that instead of downloading the
pre-built MXE binaries we might as well use a container that has all
this installed and can be used locally to test if things fail on Travis;
which will allow us to have the exact same environment for testing
locally as runs on Travis.
At this point the container used is way too big - more effort needs to
be spent on shrinking it.
Right now this only deals with Subsurface and not with smtk2ssrf.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
That qmake -query was added for debugging a long time ago.
Since the comment clearly indicate that the edit of the Makefile is only
for Travis, let's only do it when running on Travis.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It wasn't documented in the first place (magic first argument, anyone?).
This used to be available for quite a few of the dependency and had
somehow kept around only for Grantlee and Googlemaps. Let's just kill
this and be consistent for all dependencies.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If only selected dives were exported into HTML, the statistics would
nevertheless cover all dives. A counter-intuitive behavior. Fix by
adding a selected_only flag to calculate_stats_summary().
Reported-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The statistics of the selected dives were calculated
a) into a global objects and
b) at a completely different place than where they're used.
There's no plausible reason for either. There fore render
into a caller-provided structure at the place of use.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Statistics were calculated into global variables every time the
current dive was changed.
Calculate statistics only when needed and into a structure
provided by the caller.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The background color was plain white, where we use a slightly different
color in other places. In addition, the background when clicking on a row
did not follow the theme setting. Consistency fix.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Something I only see on mobile-on-desktop, so at this point in time
not very relevant to the device apps. When hovering on the action
button, a toast message shows a hint box. These where empty in some
cases. So, just give the actions a text attribute where it was
missing.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Turns out that the initial quoting implementation discarded the fields
without quoting. This one ensures we should be getting also that data
exported.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
This flag had two distinct uses:
- signal that dives were downloaded, not imported
- use to mark imported dives
Both are not used anymore, therefore remove the flag.
The uemis downloaded misused the flag to mark deleted
dives. Instead misuse the "hidden_by_filter" flag.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
process_imported_dives() is more efficient for downloaded than for
imported (from a file) dives, because it checks only the divecomputer
of the first dive.
This condition is checked via the "downloaded" flag of the first
dive. Instead, pass an argument to process_imported_dives().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Dive importing is now performed via a distinct table which is
merged into the main dive table. Thus, it is known which of the
dive is new and which is old. This information can now be
implicitely encoded in the parameter-position of merge_dive()
[i.e. pass old as first and new as second dive].
This makes marking of downloaded dives via a flag unnecessary.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Dives are now in all cases imported via distinct dive_tables.
Therefore the "preexisting" marker is useless. Remove.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Dives were directly imported into the global dive table and then
merged in process_imported_dives(). Make this interface more flexible,
by passing an independent dive table.
The dive table of the to-be-imported dives will be sorted and merged.
Then each dive is inserted in a one-by-one manner to into the global
dive table.
This actually introduces (at least) two functional changes:
1) If a new dive spans two old dives, it will only be merged to the
first dive. But this seems like a pathological case, which is of
dubious value anyway.
2) Dives unrelated to the import will not be merged. The old code
would happily merge dives that were not even close to the
newly imported dives. A surprising behavior.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old surface interval calculation had fundamental issues:
1) process_all_dives(), which calculates the statistics over *all*
dives was used to get the pointer to the previous dive.
2) If two dives in the table had the same time, one of those would
have been considered the "previous" dive.
3) If the dive, for which the surface interval is calculated is
not yet in the table, no previous dive would be determined.
Fix all this by creating a get_surface_interval() function and
removing the "get previous dive" functionality of process_all_dives().
Remove the process_all_dives() call from TabDiveInformation::updateData().
Reported-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Because some BLE operations can be very slow (device and service
discovery etc), we have some rather excessive default timeout for BLE
(currently set to 12 seconds).
But once we actually have started doing IO, that long timeout can be a
big performance problem, when the libdivecomputer backend has support
for retry and packet loss.
For that reason, libdivecomputer has a 'set_timeout()' function that
allows the divecomputer backend to say how quickly it expects the dive
computer to answer before the backend will start resending packets.
Let's just implement that for the actual IO side of BLE too. The
default timeout value remains the general BLE timeout, and this only
affects the actual IO phase, but it improves things enormously for the
case where there is packet loss at that point.
For example, on the Aqualung i770R, the timeout for packet loss ends up
now being just one second rather than the full 12 seconds of default BLE
timeout. Which gets the retry going much faster.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we enable notifications, we actually want to make sure to wait for
that write to have completed before we start communicating with the
device, because otherwise we might lose notification events.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In commit 30fb7bf35c ("qt-ble: set up infrastructure for better
preferred service choice") I moved the service filtering from the
addService() callback into the "select_preferred_service()" function
that picks the right service for the device.
That was nice for debugging, since it meant that we showed the details
of _all_ services, but it also meant that we ended up starting service
discovery on _all_ services, whether they looked at all interesting or
not.
And that can make the BLE device discovery process quite a bit slower.
The debugging advantage is real, but honestly, service discovery can
generally be better done with specialized tools like the Nordic nRF app,
so the debugging advantage of just listing all the details of all the
services is not really worth the discovery slowdown in general.
So move the basic "filter by uuid" back to the service discovery phase,
and don't bother starting service detail discovery for the services that
we can dismiss immediately just based on the service UUID.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The error handling was incorrect for the case where we successfully
opened the libdivecomputer iostream in divecomputer_device_open(), but
the dc_device_open() call failed.
When the dc_device_open() failed, we would (correctly) not do the
dc_device_close() but we would _also_ not do the dc_iostream_close() to
close the underlying file descriptor, which is wrong.
Normally this isn't all that noticeable, partly because the common case
is that dc_device_open() succeeds if you actually do have a dive
computer connected, but also because most of the time it just leaked a
file descriptor or something like that.
However, particularly for the POSIX serial device case, libdivecomputer
does a
ioctl(device->fd, TIOCEXCL, NULL)
call to make serial opens exclusive. This is what we want - but if we
then fail at closing the serial file descriptor, we won't be able to
retry the import at all because now the next open will fail with EBUSY.
So the error handling was incorrect, and while it doesn't usually matter
all that much, it can be quite noticeable particularly when you have
transient errors.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If no dives were downloaded in do_libdivecomputer_import(), an
error message would be produced. To check for downloaded dives,
the function would access the global downloadTable instead of
the actual table the dives are imported to (at the moment the
same - but the interface allows for a different table).
Move the error-creation to the caller to avoid this situation.
An alternative option would be to check the actual table the
dives were supposed to be downloaded to. But from a program-logic
point of view "no dives" does not seem like an error condition.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The Uemis downloader determines the dive-number to be downloaded
by either checking the download-table [interrupted connection] or
the global dive table [fresh download].
The downloadTable is passed in the device data structure, but
in the function to determine the latest dive, the global
downloadTable is accessed directly [thus supposing that this
table was passed in device data].
Instead, use the table from device data to avoid funny surprises
should we change to a non-global download table.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
By making this modal, we can use a local variable and remove the
nasty "deleteLater()" hack to reclaim the resources after the
dialog closes.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
No point in having this in the header file as it is not used
outside.
Remove the CSVAPPS macro, as this was never used. One thing less
to maintain.
Remove the sentinel with name = NULL, as we can simply use
range-based for.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Poseidon MkVI logs (.txt) were special cased in MainWindow.cpp,
which led to a user-interface inconsistency. In some cases
[user chooses ".txt" (non-Poseidon) and ".csv"], *two*
import-dialogs were shown.
Move handling of Poseidon MkVI logs into DiveLogImportDialog.
There are already other "special" cases handled in this dialog.
At the moment, this shows the first 10 depth-values, which is
kind of useless, as this will all be at surface level. We
might think about something more useful.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On DAN-file import after each dive except the first, the dive-list
was processed. This seem bogus and inefficient. An artefact from
old code? In any case, remove.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In some Mac environments autotools somehow think that we have clock_gettime(),
even though it isn't supported. Somehow the previous workaround stopped working
as make ended up re-running ../configure and overwriting our change. This tries
to work around that problem.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When starting the mobile app, I noticed a short display of an empty
page with title "Cloud creditials" just before showing the
divelist. Simply a not nice visual effect.
This commit simplifies some logic and resolves this. As the code
in this part is fragile, this is tested for normal and clean
startup of the app, switching credentials, from no cloud to
valid account (which even nicely imports the no cloud dives:
this surprised me as I have never seen this working).
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This reverts commit 53341c037d.
The commit isn't wrong, but it breaks Travis and I can't seem to get the
newer MXE build to work on Travis. So while I figure out how to work
around THAT, let's just revert this and come back to it once Travis is
ready.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
