Strangely enough, half of the infrastructure was
already there, it just wasn't hooked up to a UI
element
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Some DCs only report water type, without salinity level. Subsurface
fixes most of these cases using default levels, but when the type of water
is Sea/Salt, this fix was not saved.
This causes a bit confusion, mainly if the user defines own salinity level.
Signed-off-by: Rafael M. Salvioni <rafael.salvioni@gmail.com>
Fix a bug causing the bluetooth address not being used when downloading
from a 'remembered' dive computer if the device selection is populated.
This specifically excludes MacOS, as 'remembering' bluetooth connections
does not seem to be working there as per
https://github.com/subsurface/subsurface/pull/2158#issuecomment-508933672.
I am not super sure why we are _not_ trying to use the 'remembered'
device if the device selection is populated (`ui.device->currentIndex()
== -1`) - maybe this should be clarified in a comment?
Signed-off-by: Michael Keller <github@ike.ch>
In order to support development of the open source firmware of the
OSTC4.
Requires changes in libdivecomputer.
Signed-off-by: Michael Keller <github@ike.ch>
Fixes a bug reported in
https://groups.google.com/g/subsurface-divelog/c/8N3cTz2Zv5E:
When planning a CCR dive with multiple segments, the textual dive plan
was showing a non-existent gas change with bogus data. The first part
of the fix is uncluttering of the message printed: Since this change is
_after_ the current diveplanpoint the data needs to come from `nextdp`
and not `dp`. The second part is that the message is not printed any
more if the current and the following segments have been manually added:
According to comments in the code the change should only be printed on
the segment _before_ the change if this segment is an ascent segment
that is followed by a manually entered segment.
Signed-off-by: Michael Keller <github@ike.ch>
Merge upstream updates from Jef Driesen:
- Deepblu Cosmiq+ support has been merged upstream
- Oceans S1 support has been merged upstream
- Various new models supported: Cressi Donatello, Scubapro G2 TEK, new
Excursion v6+ firmware.
- misc core changes, most notably supporting a new annoying specialized
binary format for decomode, because Jef still can't deal with
strings.
- lots of small details
(all the work done by Linus - I'm just adding this to Surface)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fixes a bug reported in
https://groups.google.com/g/subsurface-divelog/c/8N3cTz2Zv5E:
When planning a CCR dive with OC bailout, the diluent gas may be chosen
as the first OC bailout gas, despite being set up with a use type of
'diluent', and likely not being available for open circuit breathing.
`best_first_ascend_cylinder` is now initialised to an invalid value
(instead of the first cylinder, which may or may not be a diluent
cylinder), and its subsequent use is guarded by a validity check.
Signed-off-by: Michael Keller <github@ike.ch>
3629a87 changed the handling of cylinders in multi-dives edit.
Not only should the cylinders be the "same", but also at the
same position. The code did not check whether the edited dives
even had that many cylinders, leading to a null-pointer
dereference.
Check whether the cylinder exists before comparing it.
Fixes#3578.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Use the drop down for editing the tank use in the gas list in both the
equipment tab and the dive planner.
The tank use column is now available in the equipment tab for all dives
and not just CCR dives, as 'not used' is a valid entry in both cases.
However, if the current dive is an OC dive, only 'OC-gas' and 'not used' are
shown.
There still seems to be a problem that in some cases, when opening the
planner after selecting an existing CCR dive the drop down in the
planner does not list CCR gas uses - for some reason `displayed_dive`
does not seem to be updated correctly on opening of the planner. But I have not been able to
reproduce this consistently, and changing 'Dive mode' fixes this.
Signed-off-by: Michael Keller <github@ike.ch>
The Heinrichs Weikamp OSTC4 introduced an additional
'Cave' brightness level that is dimmer than all existing ones.
Signed-off-by: Michael Keller <github@ike.ch>
Instead of adding all gases read from a dive computer as part of a dive
log as 'OC-gas', add gases as 'diluent' if the dive has a dive mode of
'CCR'. This creates consistency with the ppO2 for CCR dives being
tracked as sensor readings or a fixed setpoint, and not as the ppO2 of
the current gas ad depth.
A follow up question from this is whether gas use in the cylinders list
on the Equipment tab should be user editable. This seems to be
inconsistent at the moment, with gas constituent percentages downloaded
from the dive computer being editable, but gas use not.
Signed-off-by: Michael Keller <github@ike.ch>
The code that calculates the bounds of the value axis was broken
when all items had the same value. In that case, increase the shown
range explicitly. It doesn't really matter how much the range
is increased, because all items will be at the center of the graph.
Also, don't overwrite the "decimal" value of the class. That was
just weird.
Fixes#3544.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When collecting the data for the infobox, we have
already computed the current partial pressures of the
breathing gas taking into accoutn the divemode. Use
those rather than fractions (which for CCR mode are
those of diluent) to compute the gas density.
Reported-by: Pietro Tranquillini <p.tranquillini@gmail.com>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
We must add one more entries than there are days, because the
entries describe the values between histograms.
The root cause of the problem here is that a histogram axis
is misused for a continuous day-axis.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This got broken in commit 7417f865cd ("cleanup: un-singletonize
ShiftTimesDialog") and no one ever noticed.
We need to intitialize the when variable and set up the initial texts in
order for the time shift dialog to show the correct information. Doing
this in the ButtonClicked member (right before the dialog is destroyed)
makes absolutely no sense.
Fixes#3535
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This used to be one of the tab-widgets, which was illogical
and caused confusion. Notably, erroneously clicking on the
tab header led to a reset of the dive selection.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Render a warning sign in front of the event string
in the infobox. This is done in rich text.
Note: This shows the warning sign for all events,
not just warnings.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When zoomed in, the profile position was moved by hovering with
the mouse. What a horrible user experience. This is especially
useless if we want to implement an interactive profile on mobile.
Instead, let the user start the panning with a mouse click. The
code is somewhat nasty, because the position is given as a
real in the [0,1] range, which represents all possible positions
from completely to the left to completely to the right.
This commit also removes the restriction that the planner handles
can only be moved when fully zoomed out. It is not completely
clear what the implications are. Let's see.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Also allow editing sensor on a cylinder with already attached sensor.
This will swap the sensor data with the cylinder that it is taking the
sensor data from, removing the need for adding an extra temporary
cylinder when swapping two sensors.
Signed-off-by: Michael Andreen <michael@andreen.dev>
This was added for Android a while ago, but now this works on iOS as well which
is a very welcome addition for the recipient of these support emails (i.e. me).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For Ratio dive computers we can't tell by the Bluetooth name which model it is.
There are BT only models and BLE only models. The failure case here was a user
on iOS (BLE only) with a BLE only dive computer which we didn't recognize
because previously we returned a BT only device (which isn't supported on an
iPhone), and the lookup won't return a valid descriptor if the transport needed
isn't available.
These days BLE is far more common, so return a BLE enabled name by default, but
try a BT only name just in case.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For some reason the flag to exclude . and .. breaks this functionality.
It works just fine without that flag, so let's just remove it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When a dive has both real dive computers as well as at
least a planned version (which is just another dive
computer with a special name), only use the data from
real dive computers for aggregate values like maxdepth,
dive time, average depth etc in order not to have
imagined data on the dive list, statistics etc.
Macro-magic-provided-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This is crazy: when view() is called, the dive-site-suggestion
popup (DiveLocationListView) clears its WA_InputMethodEnabled
flag. This makes key composition not work as long as the
popup is open.
Thus, when showing the popup, explicitly set the flag.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The liter symbol is written as 'ℓ'. To allow searching for
that, normalize unicode strings to their base letter. This
corresponds to the 'compatibility' mode.
We might also think about stripping diacritics.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It's confusing to have the same name refer to two different models.
Unfortunately, that's what Aqualung is doing by simply changing the
model number and serial number, but not the external branding.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of trying to find matching cylinders, trigger on the cylinder
number first and then only edit that n-th cylinder if it matches the one
in the current dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In a sign how few people use these additional properties AND use multiple
dive computers, this took a couple of years to get noticed... but yes, we
do need to merge those properties as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Arguably every dive should at least have one cylinder, but an imported
dive from divelogs.de might end up without one. Sadly, that breaks
assumptions that we make in the cylinder remapping.
To work around it, force at least on cylinder to be assumed in the merge
code.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It appears to send a first sample with a water temperature of 0 C. If the next
sample contains a more likely water temperature, overwrite the first one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
libdivecomputer tries to be super careful in what it tells us. It only offers a
density value if that is something that the dive computer explicitly supports,
otherwise it just offers back a flag. We need to then update the density value
ourselves.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The undo stack is only relevant to the dives that were loaded at the
time the command was executed. If a file is closed, by specifically
closing it or opening another file, then the undo commands will
reference dives that aren't available anymore. Clearing the undo stack
ensures that we don't crash or accidentally do some undefined
modifications to the currently open file.
Signed-off-by: Michael Andreen <michael@andreen.dev>
To import media files from the web, increas the size of the
dialog box and allow several URLs separated by newlines.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
I forgot to clean up the CHANGELOG file for the previous release, and some of
the commits in this release were missing CHANGELOG entries.
This should make sense now.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Tweak the Lat/Long coordinate parser to allow coordinates of the form:
12.1049° N, 68.2296° W
The coordinate parser works by tokenizing coordinates one at a time.
Consequently it is invoked twice on user input to get latitude and then
longitude. Normally, after parsing the first coordinate, intervening
characters such as , or ; and any whitespace would be discarded from the
input before parsing the second coordinate. Prior to this patch, if the
coordinate format was in degrees followed by a sign (N is a sign in this
example), the parser would skip the bit of code that fast forwards past
any intervening separators and whitespace (, in this example). This
resulted in coordinates of this form not being accepted, because the
second parse would start with , 68.2296° W and reject this as an invalid
coordinate.
To rectify this, the bit of code that fast forwards past separators and
whitespace has been broken out from the tokenization loop and performed
as a final step after a single coordinate has been completely parsed and
validated. Doing it this way makes it independent of the state of the
tokenizer, so that the fast-forward code will always execute once a
coordinate has been successfully parsed.
I've also centralized the list of allowed separators into its own static
string; this is necessary as part of the patch but should also make
allowing additional separator characters between coordinates trivial in
the future, if needed.
Signed-off-by: Quentin Young <qlyoung@qlyoung.net>
When changing the theme to a dark theme, also change the
statistics theme. The code is a mess, because it crashes
when setting the theme right at the beginning. Therefore,
there is a "theme has been set" flag. Also, this directly
accesses the ThemeInterface singleton object. I have no
time to fight QML, sorry.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This way they are available in both mobile and desktop version.
Without this, the icons weren't shown on iOS and Android.
Fixes#3214
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Place undo commands for every change of the profile, not
only on "saving". Move the edit-mode from the mainwindow
and the maintab to the profile widget.
This is still very rough. For example, the only way to exit
the edit mode is changing the current dive.
The undo-commands are placed by the desktop-profile widget.
We might think about moving that down to the profile-view so
that this will be useable on mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
