- add correct setting of the water type drop down for the dive shown
initially after program start;
- change salinity to have 3 decimals in planner, to make it consistency
with the log.
Fixes#4240.
Reported-by: @ccsieh
Signed-off-by: Michael Keller <github@ike.ch>
- standardise the naming;
- use it consistently;
- apply the 'samples < 50' only when putting manually added dives into
edit mode - everywhere else manually added dives should be treated as
such;
- do not show a warning before editing a manually added dive in planner.
Signed-off-by: Michael Keller <github@ike.ch>
Add auto-sizing to the extra info table - resize the columns so that all
rows are shown in full whenever the data is updated.
Signed-off-by: Michael Keller <github@ike.ch>
The old code was leaking memory. Use std::unique_ptr<> for
ownership management.
This is still very primitive and divetags are kept during
application lifetime. There should probably be some form
of reference counting. And the taglist should not be global,
but attached to the divelog.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Mostly irrelevant std::move() stuff of copy-on-write Qt objects,
a few real bugs, a timestamp_t downconversion and some codingsyle
adaptation.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On the InformationTab a signal is emitted when programatically
setting the index of the dive mode combobox which in turn then
edits the dive.
Usually not a problem, because the editing code realizes that
the value is not changed. It is however a problem when multiple
dives are selected.
Therefore, block the signals when setting the index. Same for
the other comboboxes on the same page.
Fixes#3960.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Include unused tanks in merges of multiple logs into a single dive if
the 'Show unused cylinders' preference is enabled.
Also rename the preference (in code) to `include_unused_tanks` to
reflect the fact that it is already used in more places than just the
display (exporting, cloning dives).
Simplified the cylinder model to make forced inclusion of unused tanks
dependent on use of the model in planner.
Leaving the persisted name of the preference as `display_unused_tanks`
to avoid resetting this for all users - is there a good way to migrate
preference names?
Signed-off-by: Michael Keller <github@ike.ch>
Today salinity combo is editable if one of these rules matches: The dive was manually entered or if salinity edition is allowed in preferences.
However we can have cases that dives were downloaded but its doesn't have salinity info.
This fix considers if there's a DC salinity info to decides combo edition and if salinity change indicator will be showed or not.
If DC doesn't have salinity, the UI behavior is the same of a manual dive
Signed-off-by: Rafael M. Salvioni <rafael.salvioni@gmail.com>
Don't access the global current_dc, but pass it to the sensor and
tank-use delegates, when the current dive or dive computer changes.
The same pattern is already realized for the tank and weight models.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive-equipment tab has a number of "delegates" for editing
tanks sizes, etc. Instead of allocating them, make them subobjects.
The main point here is that, in an upcoming commit, the sensor
delegate will have to be accessed to change the current dive computer.
So far it didn't have a name and therefore was hard to access.
By making it a subobject it also gets a name.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
An attempt at limitting accesses to the globals current_dive and
dc_number. These globals do not make sense on mobile.
The parent widget of the tab-widgets remembers the currently
displayer dive and dive computer and the individual widgets
access these values from there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Make it possible for the individual tab-widgets to access the
parent widget. In principle this could have been done by
downcasting the pointer returned by parent(), but this makes
it explicit.
The goal here is to store information on the selection,
current dive, etc. without repeating it in every subwidget.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On selection change, pass down selection (including current
dive and dc) to the tab widgets. Ultimately, this should
remove access to global variables. A number of new accesses
are marked as TODO. They shall be removed in due course.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of accessing the global dc_number from the
DivePlannerPointsModel and the CylinderModel, pass them
in the respective initialization functions.
The dc_number global might not make sense on mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This tries to encapsulate the management of the current dive and
divecomputer in the selection code. The current dive is alreay
set by setSelection(). Add a new parameter to also set the
current divecomputer. If -1 is passed, then the current
computer number is remained. This will allow us to audit the code.
Because for now, the whole "current dive computer" thing seems
to be ill-defined.
This fixes a bug: the dive-computer number wasn't validated
when making a new dive the current dive. The new code has some
drawbacks though: when selecting a whole trip, the validation
will be called for all dives in the trip and thus the dive computer
number will depend on the dive with the lowest amount of dive
computers in the trip. This will need to be fixed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Use the drop down for editing the tank use in the gas list in both the
equipment tab and the dive planner.
The tank use column is now available in the equipment tab for all dives
and not just CCR dives, as 'not used' is a valid entry in both cases.
However, if the current dive is an OC dive, only 'OC-gas' and 'not used' are
shown.
There still seems to be a problem that in some cases, when opening the
planner after selecting an existing CCR dive the drop down in the
planner does not list CCR gas uses - for some reason `displayed_dive`
does not seem to be updated correctly on opening of the planner. But I have not been able to
reproduce this consistently, and changing 'Dive mode' fixes this.
Signed-off-by: Michael Keller <github@ike.ch>
This causes UI confusion. Notably we go into edit mode and
reduce the number of samples, leading to loss of information.
If someone really manually adds a dive with more than 50
samples, they should still be able to explicitly open the
dive in the planner.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This used to be one of the tab-widgets, which was illogical
and caused confusion. Notably, erroneously clicking on the
tab header led to a reset of the dive selection.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Owing to bit-rot, the extradata tab was not disabled if no dive
is selected. The reason was that there was an additional tab
(dive-computers) that should not be disabled. However that
tab was removed and now the extradata tab was not disabled.
Fix this, but note that there is another of these 'parasitic'
tabs, that should be removed, namely the dive-site tab.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Also allow editing sensor on a cylinder with already attached sensor.
This will swap the sensor data with the cylinder that it is taking the
sensor data from, removing the need for adding an extra temporary
cylinder when swapping two sensors.
Signed-off-by: Michael Andreen <michael@andreen.dev>
Making this simply depend on Qt5 or Qt6 was short-sighted as work on QtLocation
upstream continues. Instead break this out as its own option.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The only things in display.h were profile related, so the
split between these two files is not comprehensible.
In fact profile.h includes display.h, because it needs the
struct defined therein. Let's just merge these two files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only caller misused this function to get access to the
current divecomputer. Remove it, since selection of the
current divecomputer is handled by the MainWindow.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There were only three users of that. For now do it inline, but
we may think about a separate function, which is only available
on desktop.
Moreover, add nullptr-checks, even if they are not strictly
necessary.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a column to the equipment table that shows if a sensor is attached to a
tank, or which sensors would be available to attach to a tank that currently
doesn't have a pressure sensor associated with it.
Changing the sensor assignement can be undone.
This column is hidden by default as this is a somewhat unusual activity.
Signed-off-by: Michael Andreen <michael@andreen.dev>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This file was so confusing: A tabwidget containing a layout
containing a tabwidget. This strange situation is probably
due to moving the multi-dive warning message.
Remove the file, there seems to be nothing of importance
in there. All the UI was moved to the individual tabs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was always this weird asymmetry that the "maintab" widget
is one of the tabs itself, whereas the additional tabs were
treated as extra-widgets. Turn the first tab into explicit
source files to make the distinction between container and
content clear.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When the user undos/redos the profile should update even
when in edit mode. This is a bit more complicated than
anticipated:
1) We should not do the update when emitting an undo command
from the profile. But we *should* update if it is an undo
command from the maintab (change depth/time).
2) The divepointsplannermodel has to be reset. Side note:
the code is truly abysmal as it sends numerous changed-signals.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Place undo commands for every change of the profile, not
only on "saving". Move the edit-mode from the mainwindow
and the maintab to the profile widget.
This is still very rough. For example, the only way to exit
the edit mode is changing the current dive.
The undo-commands are placed by the desktop-profile widget.
We might think about moving that down to the profile-view so
that this will be useable on mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These two actions were using the same command with a flag
controlling the name of the command, which is shown in
the undo menu.
However, the replanDive does much more (such as changing
the notes) and in the future we may want to be more
fine-grained with respect to profile editing. Therefore,
split these commands into two separate ones.
Moreover, make the editProfile command more flexible.
Pass an enum describing the action instead and also
a counter indicating how many points have been
moved or removed.
Finally, don't consume the input dive in the editProfile
command, because we will want to keep the original dive
while editing the profile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In general, replace "dive master" by "dive guide".
However, do not change written dive logs for now. On reading,
accept both versions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
User report: when switching focus between windows, the
cursor position gets lost. This is due to a note-edit
command being fired, which then overwrites the notes tab.
To prevent this, don't update the notes field when placing
a command. Moreover, generally don't update the dive
selection when placing a command as that also rewrites all
the values.
Should this be extended to other fields?
Fixes#3365
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On the equipment tab, unused cylinders (automatically added,
no pressure data) could be hidden. This was implemented using
a QSortFilterProxyModel.
Apparently, it causes confusion if cylinders in the middle of
the list are hidden. Therefore, only hide cylinders at the end
of the list.
QSortFilterProxyModel seems the wrong tool for that job, so
remove it and add a flag "hideUnused" to the base model. Calculate
the number of cylinders when changing the dive.
This is rather complex, because the same model is used for
the planner (which doesn't hide cylinders) and the equipment
tab (which does). Of course, syncing core and model now becomes
harder. For instance, the caching of the number of rows was removed
in a37939889b and now has to be
readded.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The logic did not consider the WORKINGPRESS_INT and SIZE_INT
columns added in cb80ff746b.
By some unknown magic this worked by routing everything
through the CylindersModelFiltered model.
Let's fix it and explicitly ignore these columns. Put
the test whether a column should be ignored in a function
to avoid inconsistencies should new columns be added.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
CCRs are different. It does not make sense to compute
a depth dependent SAC. You could compute the rate of O2
consumption but even that is likely wrong (as O2 in the
diluent would enter that as well), so simply don't attempt
it.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The TabDiveComputer model won't work in the new world order, where you
can't even insert a new device entry without a nickname to be edited.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thus, the membuffer data is automatically freed when going
out of scope - one thing less to worry about.
This fixes one use-after-free bug in uploadDiveLogsDE.cpp
and one extremely questionable practice in divetooltipitem.cpp:
The membuffer was a shared instance across all instances
of the DiveToolTipItem.
Remves unnecessary #include directives in files that didn't
even use membuffer.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
MainTab::updateDiveInfo() is not executed when in the planner.
To decide whether the application is in the planner state,
it queried the profile. Instead, query the DivePlannerPointsModel.
Currently, there is no autoritative carrier of that flag.
However, the MainTab has a dependency on DivePlannerPointsModel
anyway, and therefore this removes a dependency on the
profile. This brings us closer to a state where we can have
multiple profiles.
Ultimately, it is hoped that the whole check can be removed
at this place, making the point moot.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The accept / reject message is only shown in edit-mode, no
need to check it. This is a step in simplification / removal
of the edit mode.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
