This allows us to support the Suunto EON Steel on Mac, assuming the matching
libdivecomputer version from the Subsurface-branch. If that was compiled with
the hdiapi lib then hopefully the build for Subsurface should find that library
as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This shouldn't be on the maintab.cpp, this file is already too convoluted.
[Dirk Hohndel: slightly refactored this commit and the next one to make
the code actually work and make the split across the two
commits more reasonable]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Under certain conditions on my Mac the build process will happily find libssh2
but then at link time can't figure out where it is. Making the path to the
library explicit seems to fix that issue.
This commit also adds the code to dump all visible variables at the end of the
cmake file (commented out). I have looked this up online, added it to address
an issue, and then removed it quite a few times... I figure I might as well
keep it there for the next time I need it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds the option to retrive Marble with pkg-config in a
similar way to Grantlee, libgit2, etc.
It reorganizes the "if(NO_MARBLE)" case to be the "else()" of
if(NOT NO_MARBLE).
Also, it adds the "-r" option to "rm" here:
add_custom_target(link_marble_data ALL COMMAND rm -rf ./marbledata ...
as otherwise it fails on Win32/Msys with "marbledata is a directory".
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As we get closer to the 4.5 release we should try to make sure we build
with printing enabled everywhere and just turn it off if we no it's not
supported.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a new Model, it's the QSortFilterProxyModel that accepts
functions to filter / sort. so instead of creating a new class
for each different sorting (overkill), now we can just create
a function and pass to this class. I'll rework the filtering
system of subsurface to use this - in the meantime I've created
this to ease the creation of another filter: the dive sites
by gps coordinates.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And add a small message that two potential ERRORS that are thrown in the
deploy step are actually harmless.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This just makes sure that writing data to git storage and reading it back
gives you the same result. Without the fixed generation of initial dive
site UUIDs this fails.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Cmake has a bug that causes the moc process not being handed the necessary
defines for the architecture we are building for.
Also we were missing a library to make the BT implementation on Windows
work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This connects the serial_ftdi implementation to subsurface, and builds
libftdi1 for the android builds.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This cleans up serial_ftdi.c from being a libdivecomputer source and
making it into a subsurface custom_serial.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should work much better as libusb is really only required if you want
support for all the dive computers (e.g., Atomics Aquatics Cobalt family).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This model should be used inside the Edit Dive Site mode.
It should display all photos from all dives that are part
of this dive site, ignoring trips.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also remove the quick hack from commit 947fda14c5 ("Bluetooth support:
quick build fix for Qt5.2"). I should have thought this through before
pushing that commit, but oh well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This removes the extra Q_OS_ANDROID define to prevent a redefined
warning.
Somehow, the qt headers didn't define Q_OS_ANDROID previously, but how
does.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Link the QMLProfile class to the DiveList.qml file. The profile is
displayed above the dive details.
Signed-off-by: Grace Karanja <gracie.karanja89@gmail.com>
We need to link things in the correct order, even on android.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This teaches android build.sh and cmake about how to build the qml ui of
subsurface-mobile as a apk.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This introduces code to use qt-android-cmake to produce a working apk.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Due to bugs in libgit2, we force linking with libssh2 to add
git-over-ssh support. On android we currency don't want libssh2 due to
its dependency chain, so this makes the libssh2 force linking opt-out.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way we can selectively turn off Facebook support.
And turning off both Facebook support and support for the user manual
allows us to not rely on QWebKit which once again allows debugging
Subsurface with valgrind on Arch Linux.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Create a custom Bluetooth serial communication using the QTBluetooth
API and use it when the Bluetooth download mode is enabled.
First try to connect on RFCOMM channel 1 because this is the default
RFCOMM channel of SPP service for most devices. If this doesn't work
try again on RFCOMM channel number 5 because it could be a Petrel2 device.
Add a fake open function for the custom implementation. This is
used when the selected device is HW OSTC 2N and the Bluetooth
mode is activated, then fake the open call of the serial device.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Implement a dialog which can be used for remote Bluetooth devices
selection and to control the local Bluetooth device.
Functionalities of the widget:
- expose information about the local BT device
- scan for remote BT devices
- pair/unpair with a remote BT device
- turn on/off the local BT device
- logging
- save the selected BT device
The selection dialog is created when the bluetoothMode checkbox
is enabled.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The changed introduced in d880040d breaks mobile builds by not correctly
linking with QtQuick. This change fixes that by fixing the incorrect line
in CMakeLists.txt so that the correct QtQuick headers will be found.
Signed-off-by: Grace Karanja <gracie.karanja89@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The TemplateEdit class works to customize the tempalate before printing,
User can select the font-size, font-type, color-palette, linespacing
and editing the template HTML code.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This sets up a standard dive scenario (30 minutes at 260ft/79m, EAN36 and
Oxygen as deco gases, last stop at 20ft/6m) and calls the planner to set
up a dive plan given certain standard gases.
Instead of trying to verify the complete plans it checks that we switch to
the deco gases at the right depth and the complete duration of the dive
matches our expectation.
The test intentionally fails right now for imperial as we have the wrong
switch depth for Oxygen. See how useful tests are?
On the downside, the test does NOT produce the same plan as Subsurface
when I try to create a consistent setup for both - and I have not been
able to figure out why. There must be some other parameters that I'm not
setting, but I haven't identified them, yet. It's very small differences,
for example in the metric case the stops at 21m, 9m, and 6m are each one
minute shorter in the test than it what Subsurface calculates.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is designed to store taxonomy information for dive sites, including
information where the data came from.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was intended to help us fine libssh2, but since it works as is now,
and the typo makes the entry pointless, I'm pretty sure that this isn't
needed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the first step to be able to build Subsurface with CMake for
Android.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt for android doesn't have any printing support, so this fixes
NO_PRINTING so we can build against a Qt without any printing support at
all.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This re-introduces the NO_USERMANUAL flag, which is needed due to the
fact that Qt-Android doesn't have a WebView to view the manual in.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
