Not that we aren't already insanely permissive in parsing just about any
random noise that could _possibly_ be construed as xml and turn it into
a dive, this makes us even laxer.
If somebody wants to have a <date> tag with both date and time, why the
heck not? It's fine. And if it has just the date, that's fine too. And
the date can be in any of several formats. We really don't care, the
more permissive, the better.
We strive to always write beautiful xml, but let's face it, not
everybody else does. If we can turn random line noise into a dive, we
should do so.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a sample at time 0 to allow for a pO2 from the start of the dive.
Remember the last pO2 so it doesn't have to be repeated (and the right
thing happens for the planned part of the dive).
This still doesn't allow us to change the setpoint at a certain depth
(which would be analogous to being able to switch to a certain gas at a
certain depth in OC plans), but with this commit it's already usable.
This commit also fixes a couple of small bugs in commit b8ee3de870fa
("Dive planning for closed circuit rebreather") where a pO2 of 1.1 was
hardcoded in one place, throwing off all plan calculations and integer
math was used to calculate a floating point value (leading to most pO2
values actually used being 1.0).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This misses a single issue to be used as a base for further discussion:
The CC setpoint is used for the next segment, not the one specified for. I
also have in mind to modify the existing code to use setpoints specified
in mbar and plain integer instead of float values.
Signed-off-by: Jan Schubert <Jan.Schubert@GMX.li>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On 28 January 2013 23:26, Dirk Hohndel <dirk@hohndel.org> wrote:
>
> Just pushed out Linus' Gtk3 readiness changes plus my change that allows
> the user to not only type in GPS coordinates but also use a map widget
> to pick the dive site.
>
> There were a few very odd Gtk things going on - when I opened the map
> widget from the dive info dialog (by clicking the button), the widget
> would be completely unresponsive. No panning, no zooming, no
> right-click, nothing.
>
> Opening an equipent widget and immideately closing it again suddenly
> made the map widget responsive. WTF?
>
> I worked around this by doing an explicit grab in the map widget, but
> that seems like a hack and just to work around the underlying issue.
>
> If anyone can figure this out, patches welcome.
>
> The other shortcomings (besides the uglyness of the UI) are that it may
> be non-obvious to the user that it takes a right click to get a menu
> item that allows you to "mark location here" - I'm sure there's a more
> intuitive way to do this, but since left click is used for panning, this
> was the best idea I could come up with...
>
> Please test - I wouldn't be surprised if there are a few bugs still
> hidden in this code.
>
here an fix to make this work on win32 and also solve a potential issue of type:
(subsurface.bin:19441): Gtk-CRITICAL **: IA__gtk_entry_set_text:
assertion `GTK_IS_ENTRY (entry)' failed
my commit message is explicit on the reasons:
------------------------
When called from the "dive edit" dialog the, map windows seems
inactive on Windows. It cannot accept focus and is also behind all
other application windows.
There are a couple of important new calls in gps.c:show_map():
gtk_window_set_transient_for(GTK_WINDOW(*window), GTK_WINDOW(main_window));
(^ docs say gtk "may" call this one for us, on what condition - not specified)
gtk_window_set_modal(GTK_WINDOW(*window), TRUE);
(^ broken on ubuntu 12.04, but needed on Win32))
Making the window transient for the main window and also modal for
the entire application's window stack (or at least try).
Older versions of gtk+2 and also in the most recently tested
libgtk2.0-0 2.24.10-0ubuntu6, seem not to recognize the significance
of gtk_window_set_modal() and the call does not work as expected.
This forces us to check if the dialog from which the call originated
exists, since its possible to close it _while_ the map widget is active.
More specifically, we check in info.c if the location_update.entry pointer
was set to NULL before performing actions with in the update_gps_entry()
callback.
------------------------
also removed the gtk_window_present() call as it seemed redundant post
these changes (?).
-------
on a side note:
looks like i'm above 100 commits...
cheers everyone <has a sip of some late beer> :0 ~ c|_|
lubomir
--
From fe9967c7ad2ec3b93ad336c2c6bed492a5ad0d8b Mon Sep 17 00:00:00 2001
From: "Lubomir I. Ivanov" <neolit123@gmail.com>
Date: Tue, 29 Jan 2013 00:24:21 +0200
Subject: [PATCH] Fix a "stacking" issue with the map-window on Windows
When called from the "dive edit" dialog the, map windows seems
inactive on Windows. It cannot accept focus and is also behind all
other application windows.
There are a couple of important new calls in gps.c:show_map():
gtk_window_set_transient_for(GTK_WINDOW(*window), GTK_WINDOW(main_window));
(^ docs say gtk "may" call this one for us, on what condition - not specified)
gtk_window_set_modal(GTK_WINDOW(*window), TRUE);
(^ broken on ubuntu 12.04, but needed on Win32))
Making the window transient for the main window and also modal for
the entire application's window stack (or at least try).
Older versions of gtk+2 and also in the most recently tested
libgtk2.0-0 2.24.10-0ubuntu6, seem not to recognize the significance
of gtk_window_set_modal() and the call does not work as expected.
This forces us to check if the dialog from which the call originated
exists, since its possible to close it _while_ the map widget is active.
More specifically, we check in info.c if the location_update.entry pointer
was set to NULL before performing actions with in the update_gps_entry()
callback.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The location map picker introduced in commit 801a61e7e0f2 ("Pick GPS
coordinates of dive location via map widget") failed to add the necessary
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To actually compile with gtk-3 you currently need to disable the use of
OSM (compatible with gtk2 only for now). And obviously figure out the
headers and libraries by using pkg-config on gtk-3 instead of gtk-2.
But now it should be only a Makefile change.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This cleans up our handling of combo boxes and all the duplicated
completion logic, and simplifies the code.
In particular, we get rid of the deprecated GtkComboBoxEntry. While it
made some things easier, it made other things harder. Just using
GtkComboBox and setting that up correctly ends up being simpler, and
also makes the logic work with gtk-3.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I have some concerns about the way this is implemented - especially the
use of gtk_grab_add to make the map widget work has me worried. But it
seems to work and survived some test cases that I threw at it.
The GtkButton with the Pixmap looks a little off on my screen, but this
way it was easy to implement. Feel free to come up with a better design.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This forces us to use the proper gtk accessor functions. It may not be
worth it if people actually do the Qt conversion, but if we want to try
gtk3 at some point, this might help.
This all came about because I was trying to explain on G+ what an
immense pain this all was to even figure out, if you don't actually know
gtk at all. Google and the gtk migration guide are almost useless, and
the gtk2 documentation itself actually uses the fields directly without
any accessor functions in several places.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are more events than scroll_up and scroll_down - and because of this
we could end up with target_lat and target_lon being uninitialized.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The idea is that while zooming the map the point under the mouse would
stay as close to constant as possible (given that we use integer
coordinates).
This version uses some algebra to figure out the correct new parameters
for the mercator projection used in osm-gps-map.
Occasionally (and we haven't figured out what triggers it) zooming out
suddenly resets your position to 0,0.
[Dirk Hohndel: switched this to using the correct interface to get the
object properties and did some serious whitespace cleanup]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I'm sure there are better ways to do this, but this appears to grok most
rational formats I was able to find. NSEW or positive/negative numbers.
Decimal degrees (WGS84) or degrees and decimal minutes (that's what most
GPSs seem to provide). I'm sure there are still corner cases that confuse
it, but it seemed reasonably robust in testing.
I don't really love the ';' as separator but that solves the obvious
problem with locales that use a decimal comma.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
That's much more intuitive to remove GPS data from a dive than having to
type in 0,0 as coordinates.
With this change we also skip leading whitespace for WGS84 coordinates.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This implementation gives the user the ability to add GPS coordinates to
the dive location. It works as expected in multi-dive edit scenarios. It
has two major flaws:
- it only support WGS84 style coordinates - it should instead be
intelligent enough to parse the common formats, at least using NSEW
instead of sign and understanding minutes and seconds instead of decimal
degrees
- but in reality, it really needs to support a map picker
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are paths through this function that reach the comparison at the end
of it without trip_a and/or trip_b being initialized.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
get_units() returns the current unit preference, thus it
belongs in prefs.c rather than gtk-gui.c
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
subsurface_launch_for_uri() requires unicode support, using
ShellExecuteW() and also the passed UTF-8 buffer has to be translated
to UTF-16 beforehand. Once the ShellExecuteW() is done we release
the UTF-16 allocation.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The behavior is just too illogical - it's too easy to unintentionally
overwrite a file this way. The default filename is set if we have exactly
one filename on the command line or if we we open the default file.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The intention was good, and this was added in commit 4982389ca7 ("Fix
setting of the dive_table.preexisting logic"), but it turns out to not
be that great idea after all.
So the thinking is that merging two dives clearly changes the dive list,
and it really does. At the same time, because it's an automated merge,
if you re-read the old XML file, you'll get it done again, so saving the
changes doesn't really *matter*.
And it turns out to be somewhat annoying with test dives: we have
- dives/test23.xml:
<dive number='23' tripflag='INTRIP' date='2011-12-02' time='6:00:00' duration='30:00 min'>
- dives/test25.xml:
<dive number='26' date='2011-12-02' time='6:00:00' duration='30:00 min'>
that merge automatically if you run subsurface on all the test dives
together.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The plot-info per-event 'same_cylinder' logic was fragile, and caused
us to not print the beginning pressure of the first cylinder.
In particular, there was a nasty interaction with not all plot entries
having pressures, and the whole logic that avoid some of the early
plot entries because they are fake entries that are just there to make
sure that we don't step off the edge of the world. When we then only
do certain things on the particular entries that don't have the same
cylinder as the last plot entry, things don't always happen like they
should.
Fix this by:
- get rid of the computed "same_cylinder" state entirely. All the
cases where we use it, we might as well just look at what the last
cylinder we used was, and thus "same_cylinder" is just about testing
the current cylinder index against that last index.
- get rid of some of the edge conditions by just writing the loops
more clearly, so that they simply don't have special cases. For
example, instead of setting some "last_pressure" for a cylinder at
cylinder changes, just set the damn thing on every single sample. The
last pressure will automatically be the pressure we set last! The code
is simpler and more straightforward.
So this simplifies the code and just makes it less fragile - it
doesn't matter if the cylinder change happens to happen at a sample
that doesn't have a pressure reading, for example, because we no
longer care so deeply about exactly which sample the cylinder change
happens at. As a result, the bug Mika noticed just goes away.
Reported-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a Makefile target to create the .nsi file from a template and to
hopefully create the right strings to magically get the correct version
strings in the Windows installer
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes sure that it's easy to tell from the about box whether this is
a released version or a development build.
If it is compiled at the exact location of the tag, "git describe
--tags" will just return the tag-name. Otherwise it will return
something like this
v2.1-393-ge03f31525aab
which means "v2.1 plus 393 commits, git SHA1 of tip is e03f31525aab",
which is a nice combination of git-readable (only the actual SHA1
matters) and human-readable (393 commits on top of v2.1).
And if you don't build from git sources, and don't have git installed,
it falls back on the old "v$(VERSION)" string.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This centralizes all occurrences of Kelvin to dive.h and standardizes all
usages to milliKelvin.
[Dirk Hohndel: renamed the constant plus minor white space cleanup]
Signed-off-by: Jan Schubert <Jan.Schubert@GMX.li>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The webservice output uses 'name' as the tag for the dive location. This
was added to the parser as unqualified tag and without this change
test24.xml was suddenly recognized as a dive (the parser was triggering on
the program 'name' attribute). Name should only be recognized as a dive
location if it is indeed a child of dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit b625332ca5ff "Display even constant temperature graph" was a little
too aggressive. If we have no temperature data at all it caused us to plot
a temperature line for absolute zero...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Making sure that this doesn't cause divisions by zero and that the scaling
and positioning doesn't get messed up by it (right now it doesn't look
great).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Dive profile does not display the temperature graph, if we have a
constant temperature (e.g. only one reading at the start of the dive).
This patch draws the temperature graph even if max and min temperatures
are the same.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The statistics page only used each dive's "watertemp" attribute,
regardless of actual higher/lower temperatures in the samples. By
finding the actual max/min temperatures, the statistics page utilize
more "real" data, and look better even on single dives.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We save the (more complete) dive computer information in the XML file
with serial numbers and firmware version if we know about them, so using
a complicated string in the system config was redundant and confusing.
So remove that code.
NOTE! Since the dive computer nicknames are now only saved if the XML
file is saved, we also mark the dive list "changed" when we edit the
nicknames. That way we'll be prompted to save things before exiting,
even if we don't actually edit any actual dive data.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used to save dive computer information only if that dive computer was
actually used in any of the dives we saved. But we can simplify the
code if we just always save any dive computers we know about. And it
does allow for some usage cases where you have nicknames for other
peoples computers that you may not actively use, but you want to see if
you end up loading multiple XML files in one go.
So there's just no compelling reason to not just save all the info we
have. And this will make it less painful to remove the "use system
config for dive computer nicknames", because you can also use this to
continue to gather dive computer info in a separate XML file if you want
to.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We use subsurface_set_conf() subsurface_get_conf() to store
and recall the prefered UID for the download.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Linus seems to have been too eager in the dc refactoring: a diveplan
doesn't have a divecomputer.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The 'preexisting' value is used for downloading dives: we want to add
new dives but, but then compare those new dives against the
preexisting ones before we start sorting things and possibly merging
them.
However, the value was only updated sporadically, resulting in it
having stale information in it. Which would cause problems
particularly if you deleted dives, so that the preexisting value would
point past the actual existing values!
So just update it unconditionally in dive_list_update_dives(), which
anything that changes the dive list is supposed to call in order to
display the changes anyway.
Also, just for safety, when removing a dive, put NULL in the last dive
table location. Nobody should ever access past the end anyway (this
is enforced by 'get_dive()') but there are places that access the dive
list table directly, and the libdivecomputer download was one of
those. No reason to leave stale dive pointers possibly around for
uses like that.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Temperatures can actually be negative, which means that rounding by
adding 0.5 and casting to 'int' is not correct.
We could use '(int)(rint(val))' instead, but the only place we care
about might as well just print out the floating point representation
with a precision of two digits instead. So if you have a dive computer
that gives you the precision, you might see '3.5˚C' as the temperature.
Remove the helper functions that nobody uses and that get the rounding
wrong anyway.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had various hacky historical artifacts in our XML parsing, partly
from our legacy of parsing integer and floating point data separately
(we used to recognize certain import format differences based on whether
the data was in a floating point or integer format). And partly from
trying to do a good job of importing crap from other dive log software.
Anyway, that actually meant that we refused to parse negative numbers,
and we ignored temperatures of zero because some diving log would do
that for missing values.
Both of these actually bit us when parsing our native XML. Of course,
only crazy ice divers would ever notice.
Noticed by Henrik Brautaset Aronsen.
Reported-acked-and-tested-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This moves the fields 'duration', 'surfacetime', 'maxdepth',
'meandepth', 'airtemp', 'watertemp', 'salinity' and 'surface_pressure'
to the per-divecomputer data structure. They are filled in by the dive
computer, and normally not edited.
NOTE! All actual *use* of this data was then changed from dive->field to
dive->dc.field programmatically with a shell-script and sed, and the
result then edited for details. So while the XML save and restore code
has been updated, all the displaying etc will currently always just show
the first dive computer entry.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since multiple dives can reference the same divesite we need to do the
strdup when the value gets assigned, not when it gets passed into the
helper function.
This also validates the location string as on my divecomputer there is an
invalid divespot 0 that has a corrupted UTF8 string as location name.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Dive locations marked (and named) via the companion app are downloaded
from the webservice, parsed and merged with the existing dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In icon_click_cb() we need to check if a correct GtkTreePath is found
(using gtk_tree_view_get_path_at_pos()) before requesting a GtkTreeIter
for it.
Without this patch a bug is reproducible, where the user may click
outside of the GtkTreeView entries, but still in the GtkTreeView -
e.g. when only one entry is available.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As reported by Henrik, there was a crash lurking in edit_dc_nickname code.
Invoking the dialog and selecting apply without changes exposed it neatly.
This is a one line fix.
Signed off by Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the code use the "dive_has_location()" function rather than
check the longitude and latitude directly.
It also uses "for_each_dive()" rather than open-coding it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
