The checkbox will be used to enable the Bluetooth
downloading mode. The button will be used to create
a dialog selection where the user will be able to
scan and select remote devices.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After a partial download (because the user hits cancel or because there
was an error, if the user hits Retry the list of dives downloaded so far
should be cleared because we will simply try to re-download the same dives
again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is bigger and more invasive then I wanted, but it's hard to break it
down into smaller pieces. Here's what it does:
The former "Download" button becomes the "Download", "Cancel download" and
"Retry" button. So this button controls your interaction with the dive
computer.
The other two buttons are now purely "OK" and "Cancel" for the dialog.
"Cancel" discards what happened (much easier now that we download into a
different table), and "OK" adds the dives that were selected in our
selection UI (by default all downloaded dives) to the real dive_table.
And while redoing all this, I also redid some of the state machine
underlying the dialog. The biggest change that the user will see is that
partial downloads (after canceling or after an error) will still offer the
dives that were completely downloaded up to that point in the selection
menu.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we now track all clicks on the row, having the setData() actually
neutralized the action that we took on the clicked() signal.
Now you can select / deselect a dive, regardless where in the row you
click.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes the issue where there was no visual feedback when clicking on
the second or third column in the grid. It would actually change the
checked state of the checkmark internally (and you would see the new state
once you clicked on another dive), but it wouldn't give immediate visual
feedback.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This tries to relete from the dive list the dives that shouldn't be
imported.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Create an on_ok_clicked that will do the actuall parsing of choosen dives.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now, ok should close the dialog, and not download the dives from the DC,
this way the user can choose what happens.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now the user can click on the dives that they want to keep.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So the user can remove the ones they don't like.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This rearranges the code so we can call it from the download dialog and
tell the user if there is a newer version of the firmware available.
This needs a proper dialog and needs to be hooked up so that the user can
accept the suggestion and go directly to the firmware update code.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Too much noise on the headers, this commit remove uneeded
headers when they are uneeded.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt5 got confused about this slot. This does the same as previously but
gets Qt5 happy.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user selects a Uemis divecomputer, don't show serial devices.
If the user selects a serial divecomputer, don't show the Uemis
filesystem.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I know everyone will hate it.
Go ahead. Complain. Call me names.
At least now things are consistent and reproducible.
If you want changes, have your complaint come with a patch to
scripts/whitespace.pl so that we can automate it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Right now the search button isn't connected for any device (clearly an
oversight). At least for the Uemis I think I have a sane implementation of
what that should do.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* ensure include guard to every header
* comment endif guard block
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch disables/enables the DC device node based on what type of
transport the selected DC uses. The only time the device node field is
used is if the selected DC uses a serial transport type. IrDA and USB type
transports do not use the device node.
Signed-off-by: Benjamin Fogel <nystire@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The forward declaration of 'struct device_data_t' is not
needed as it already comes from '../libdivecomputer.h'.
Reported by the program cppcheck.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This means we don't have to new/delete them, which is a waste of
overhead.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This means we can also remove the forward declarations.
This is the first step in removing the memory allocation for the ui
sub-classes. Without the second step, this commit is just making the
compilation time increase for no good reason :-)
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Removes the InterfaceThread
which is basically an unecessary proxy between the MainThread and
the DownloadThread.
* Use a state machine to control the DownloadWidget UI logic.
Signed-off-by: Danilo Cesar Lemes de Paula <danilo.eu@gmail.com>
The DownloadDialog behavior was broken in a way it allows the user
to make changes on the dialog while the download is happening.
Also, clicking on "Cancel" breaks/hangs the UI sometimes, as libdivingcomputer
doesn't always cancels the download right away. That's a bug that
still needs to be fixed.
Signed-off-by: Danilo Cesar Lemes de Paula <danilo.eu@gmail.com>
The download already worked, but we didn't display the new dives. This
introduces a new slot for MainWindow that updates what is displayed in
Subsurface after files were imported.
With this change we can successfully download ONCE - but when trying to
download a second dive the dialog doesn't appear to get refreshed the
right way - the OK button doesn't appear to work anymore (Cancel however
does).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Small changes to the names of elements the divecomputer download UI and
very simplistic first stab at populating the device_data_t structure.
This is lacking lots of things
- it should remember the last vendor / product used
- it should figure out which device (mount point) to offer
- it needs proper error handling
But it's a step in the right direction.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This uses the QStringListModel to populate the items
of the QComboBoxes. I used a QHash to hold every Computer
of a particular Vendor. so, products[vendor] gives me
the full list of products from each vendor.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
I think it's self explanatory - When user clicks on
'Cancel', the interface will wait for the trhead to quit
then will close itself.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is the skeleton code for a non-blocking ui-thread
It already creates the first-thread ( 'do not block the ui' )
and the second thread ('download from the dive computer')
We can in the future merge both in the same place - I didn't
want to do that now because the download function is written
in the libdivecomputer.c code, and I cant just transform that
to a QThread and use signals, so I used two threads for that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
