This had to be done simultaneously, because the table macros
do not work properly with C++ objects.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since struct divecomputer is now fully C++ (i.e. cleans up
after itself), we can simply turn the list of divecomputers
into an std::vector<>. This makes the code quite a bit simpler,
because the first divecomputer was actually a subobject.
Yes, this makes the common case of a single divecomputer a
little bit less efficient, but it really shouldn't matter.
If it does, we can still write a special std::vector<>-
like container that keeps the first element inline.
This change makes pointers-to-divecomputers not stable.
So always access the divecomputer via its index. As
far as I can tell, most of the code already does this.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Not strictly necessary, but more idiomatic C++ and less
polution of the global namespace. This one is so trivial
that there seems to be no reason not to do it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a rather long commit, because it refactors lots of the event
code from pointer to value semantics: pointers to entries in an
std::vector<> are not stable, so better use indexes.
To step through the event-list at diven time stamps, add *_loop classes,
which encapsulate state that had to be manually handled before by
the caller. I'm not happy about the interface, but it tries to
mirror the one we had before.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a hairy one, because the sample code is rather tricky.
There was a pattern of looping through pairs of adjacent samples,
for interpolation purposes. Add an range adapter to generalize
such loops.
Removes the finish_sample() function: The code would call
prepare_sample() to start parsing of samples and then
finish_sample() to actuall add it. I.e. a kind of commit().
Since, with one exception, all users of prepare_sample()
called finish_sample() in all code paths, we might just add
the sample in the first place. The exception was sample_end()
in parse.cpp. This brings a small change: samples are now
added, even if they could only be parsed partially. I doubt
that this makes any difference, since it will only happen
for broken divelogs anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Use more C++ style memory management for plot_info: Use std::vector
for array data. Return the plot_info instead of filling an output
parameter. Add a constructor/destructor pair so that the caller
isn't bothered with memory management.
The bulk of the commit is replacement of pointers with references,
which is kind of gratuitous. But I started and then went on...
Default initializiation of gas_pressures made it necessary to convert
gas.c to c++, though with minimal changes to the code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
- show the correct gasmix in the profile;
- make gases available for gas switches in the profile after they have
been added;
- persist gas changes;
- add air as a default gas when adding a dive.
This still has problems when undoing a gas switch - instead of
completely removing the gas switch it is just moved to the next point in the
profile.
Signed-off-by: Michael Keller <github@ike.ch>
Add the gas description to the label on pressure graphs to disambiguate
if multiple identical gasmixes are shown.
Also move the label to the right, where the end pressures will typically
be more spread out than the starting pressures.
Signed-off-by: Michael Keller <mikeller@042.ch>
- standardise the naming;
- use it consistently;
- apply the 'samples < 50' only when putting manually added dives into
edit mode - everywhere else manually added dives should be treated as
such;
- do not show a warning before editing a manually added dive in planner.
Signed-off-by: Michael Keller <github@ike.ch>
The only case left is in android.cpp, though that is only compiled
when compiling the full desktop app on Android. I.e. never. So
don't bother for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Remove those that are commented out, since this part of the code
will not be ported to QtQuick. So why bother?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This may appear a bit ominous, as it doesn't generate a string,
but a vector of strings (one for each line). However, that is
in preparation for the QtQuickification of the profile, where
the text-items take such a list.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
printf() is a horrible interface as it does no type checking.
Let's at least use the compiler to check format strings and
arguments. This obviously doesn't work for translated strings
and using report_error on translated strings is dubious. But OK.
Had to convert a number of report_error() calls to supress
warnings.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Fix bug introduced in 505e4e47eb.
Nobody complained, so not clear if that was user visible.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, the "hide event" status is lost when switching dives.
Save it in the event struct instead to make it persistent.
In the future we might save this information to the log file.
Then this should be integrated in the undo-system.
This commit also makes the "unhide events" menu entry more
fine grained: It now differentiates between individual
events and event types.
Note this adds an additional field to the event structure.
There is a "deleted" field that is used internally for
book-keeping, but probably should be removed. Not touching
this at the moment as long as this is C-only code. When/if
switching to C++ we can make the event linked list a table,
which will make this much simpler.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently the event type code uses libdivecomputer's flags
to differentiate between events. Make this explicit and extract
the event severity.
The reason is that later we want to be more explicit about showing/
hiding events and thereto we must format the name of events.
Moreover, this encapsulates the complexities of extracting
the severity in the event code (that used to be in the profile
code).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of passing name / flag pairs to event_type functions,
pass a pointer to the event. This hides implementation details.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This structure is used to hide events of a certain type.
The type was inferred from its name, but now includes flags.
So event_type is more appropriate.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Reinstate the hiding of events by event type across
all dives in the log. This was unintentionally removed in #3948.
Also change the event type to be specific to name and severity, and fix
bug causing 'Unhide all events' to not show when only individual events
were hidden.
This still leaves the inconsistency that hiding of similar events is
persisted across the switch between dives, but hiding of individual
events is lost when switching dives, which is mildly confusing.
Follow-up to #4092.
Signed-off-by: Michael Keller <github@ike.ch>
Fix the configuration of the deco ceilings in the mobile version:
- make the settings work;
- remove reading of the dive computer ceiling from git;
- hide the gradient factor in the profile when the calculated ceiling is
not shown;
- when the calculated ceiling is disabled in the settings, disable
editing of the gradient factor.
Signed-off-by: Michael Keller <github@ike.ch>
This does two independent things:
It sets the planner state early enough so the appropriate
default profile for the planner is created (without
safety stop).
Upon cancelling the planner, it resets the profile widget
to profile more (rather than planner) as otherwise upon
the next change into the planner the planner model is
not properly initialized.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When events are hidden in the profile, only hide events with the same
name and the same severity (flags).
From discussion in https://github.com/subsurface/libdc/pull/54.
Signed-off-by: Michael Keller <github@ike.ch>
Add a button that allows the user to hide the infobox with statistics
about the point in the dive under the mouse cursor in order to be able
to see the full dive profile unobstructed.
Signed-off-by: Michael Keller <github@ike.ch>
Remove `renderSVGIcon()` and `renderSVGIconWidth()`, as QPixmaps can be
loaded directly from SVG, and support scaling.
Signed-off-by: Michael Keller <github@ike.ch>
This tries to encapsulate the management of the current dive and
divecomputer in the selection code. The current dive is alreay
set by setSelection(). Add a new parameter to also set the
current divecomputer. If -1 is passed, then the current
computer number is remained. This will allow us to audit the code.
Because for now, the whole "current dive computer" thing seems
to be ill-defined.
This fixes a bug: the dive-computer number wasn't validated
when making a new dive the current dive. The new code has some
drawbacks though: when selecting a whole trip, the validation
will be called for all dives in the trip and thus the dive computer
number will depend on the dive with the lowest amount of dive
computers in the trip. This will need to be fixed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
With Qt-containers, this might be a small pessimization, because
it might lead to a deep copy. This can be "fixed" by
for (const Type &item: qAsConst(container))
But frankly, I don't care. Ultimately it is probably best to
replace the Qt containers by standard containers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The eventname handling code was splattered all over the place.
Collect it in a single source file and use C++ idioms to avoid
nasty memory management. Provide a C-only interface, however.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Small refactoring to use `get_gasmix_at_time` from `core` in `TankItem`
to find the first gasmix used during a dive.
Signed-off-by: Michael Keller <github@ike.ch>
When the profile was to small, it would switch into empty state
and clear the plot info.
On resize events, the plot info is not recalculated.
This means that when making the profile extremely small and
then bigger, nothing is shown.
This may also happen on startup. The profile is rendered into
a 0x0 widget and then gets a resize event.
Therefore, remember when the profile is empty and force a
recalculation of the plot info.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The moveInVector() function was defined in qthelper.h, even
though it has nothing to do with Qt. Therefore, move it into
its own header.
Morover, since it is a very low-level function, use snake_case.
And rename it to move_in_range(), because it does not only
work on vectors, but any range with random-access iterators.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The profile replots if the mode of the currently displayed
dive changed. To do so, it compares the changed dive to
the displayed_dive. However, that is only used for planned
dives since quite some time.
Fix the check and make the replotting work again.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Render a warning sign in front of the event string
in the infobox. This is done in rich text.
Note: This shows the warning sign for all events,
not just warnings.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When zoomed in, the profile position was moved by hovering with
the mouse. What a horrible user experience. This is especially
useless if we want to implement an interactive profile on mobile.
Instead, let the user start the panning with a mouse click. The
code is somewhat nasty, because the position is given as a
real in the [0,1] range, which represents all possible positions
from completely to the left to completely to the right.
This commit also removes the restriction that the planner handles
can only be moved when fully zoomed out. It is not completely
clear what the implications are. Let's see.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
No reason to keep this as a macro - a function is easier to
read, type safe and easier to debug. Moreover, give it the
more appropriate name "nearly_equal()". After all, it precisely
does NOT check floating points for equality.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This allows having 3m depth grid for metric users.
* All original properties ( named diferently ) were renamed to three_m_based_grid everywhere to be consistent.
* Plus other small changes requested during review.
Signed-off-by: Vlad A. <elf128@gmail.com>
Signed-off-by: Vlad A <elf128@gmail.com>
dc_number is a global variable indicating the currently displayed
dive on desktop. It makes no sense on mobile, since multiple
profiles can be active at the same time. Therefore, the profile
code should not access this global, but use the dc number that
is passed in.
This removes the last access.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
