We now store the model information together with the deviceid and nickname
in order to be able to check if we have a record for any dive computer
with the same model (as that now triggers our nickname dialog).
This changes the format of the config entries for nicknames - the best
solution might be to just delete those and start again.
What is still missing is the code to store the nicknames in the XML file.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having it there with the model information seemed to make sense but on
second thought it's the wrong spot to keep that information, especially
since we were storing it in the XML file in every single dive.
This change removes the nickname member from the divecomputer and makes
the rest of the code reasonably self consistent. It does not add much of
the new code for the new design to handle nicknames.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we havd divecomputer model and dive ID information available, use
that to match existing dives when trying to merge them.
Otherwise fall back to the fuzzy time-based merging logic.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We maintain a list of dive computers that we know about (by deviceid) and
their nicknames in our config. If the user downloads dive from a dive
computer that we haven't seen before, we give them the option to set a
nickname for that dive computer. That nickname is displayed in the profile
(and stored in the XML file, assuming it is not the same as the model).
This implementation attempts to make sure that it correctly deals with
utf8 nicknames.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I foolishly changed visible_columns in both the (ill-named) cns branch and
master...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Conflicts:
divelist.c
gtk-gui.c
profile.c
We either pick the CNS reported by the dive computer at the end of the
dive, or the maximum of that and the CNS values in the samples, if any.
As usual, this column in the dive list defaults to off and it is
controlled by a setting in the tec page of the preferences.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now we can simply remember the state of all the preferences at the
beginning of preferences_dialog() and restore them if the user presses
'Cancel'.
Fixes#21
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the new members to the sample structure and fills them from
supported dive computers (Uemis SDA and OSTC / Shearwater Predator,
assuming you have libdivecomputer 0.3).
Save relvant values of this to the XML file and load it back. Handle the
new fields when merging dives.
At this stage we don't DO anything with this, all we do is extract them
from the dive computer, save them to the XML file and load them back.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This actually makes us internally use 'micro-degrees' for latitude and
longitude, and we never turn them into floating point either at parse
time or save time.
That said, the Uemis downloader internally does still use atof() when
converting things, which is likely a bug (locale issues and all that),
but I'll ask Dirk to check it out.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit changes the code that was recently introduced to deal with
deco ceilings. Instead of handling these through events we now store the
ceiling (which in reality is the deepest deco stop with all known dive
computers) and the stop time at that ceiling in the samples.
This also adds support for NDL (non stop dive limit) which both dive
computers that appear to give us ceiling / deco information appear to
give us as well (when the diver isn't in deco).
If the mouse hovers over the profile we now add support for displaying the
NDL, the current deco obligation and (if we are able to tell from the
data) whether we are at a safety stop.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was necessary for the Uemis downloader when we used the SDA file
format as intermediary data format and imported that as XML buffer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The initial downloader reused the XML parsing of SDA files that was
implemented early in order to support the information extracted from the
SDA with the java applet. But creating this intermediary XML file and
handing it off to the XML import function always seemed like an ugly way
to do things. This became even more obvious when adding more features to
the Uemis downloader.
This commit completely changes the downloader to instead create dives and
record them directly.
This also adds support for divespots (which are stored in a seperate
database that needs to be queried after the divelog and dive entries have
been combined - the Uemis firmware clearly was written by monkeys on
crack - oh wait: I'm trusting these same people to get the deco right?).
This commit leaves the SDA import capability in the XML parser intact.
I'll remove that later. Because of this it actually adds a few lines of
code, but the overall change will be a substantial code deletion.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This removes the tripflag name array, since it's not actually useful.
The only information we ever save in the XML file is whether a dive is
explicitly not supposed to ever be grouped with a trip ("NOTRIP"), and
everything else is implicit.
I'm going to simplify the trip flags further (possibly removing it
entirely - like I did for dive trips already), and don't like having to
maintain the tripflag_names[] array logic.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Both dives and dive trips have the same 'tripflag' thing, but they are
used very differently. In particular, for dive trips, the only case
that has any meaning is the TF_AUTOGEN case, so instead of having that
trip flag, replace it with a bitfield that says whether the trip was
auto-generated or not.
And make the one-bit bitfields explicitly unsigned. Signed bitfields
are almost always a mistake, and can be confusing.
Also remove a few now stale macros that are no longer needed now that we
don't do the GList thing for dive list handling, and our autogen logic
has been simplified.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the dive trip auto-generation a separate pass from the
showing of the dive trips, which makes things much more understandable.
It simplifies the code a lot too, because it's much more natural to
generate the automatic trip data by walking the dives from oldest to
newest (while the tree model wants to walk the other way).
It gets rid of the most annoying part of using the gtk tree model for
dive trip management, but some still remains.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It had become a write-only field (apart from some now useless debugging)
when simplifying the remove_autogen_trips() function.
So remove it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We already kept a count of dives per trip in order to figure out when
there are no more dives left and the trip needs to be freed. Now we
explicitly keep track of the list of dives associated with the trip too,
which simplifies the "find the time of the trip" logic.
We may want to sort it in time, but for now this is mainly about trying
to keep track of the divetrip relationships explicitly. I want to move
away from the whole "use the gtk tree model to keep track of things"
approach.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This simplifies the vendor/product fields into just a single "model"
string for the dive computer, since we can't really validly ever use it
any other way anyway.
Also, add 'deviceid' and 'diveid' fields: they are just 32-bit hex
values that are unique for that particular dive computer model. For
libdivecomputer, they are basically the first word of the SHA1 of the
data that libdivecomputer gives us.
(Trying to expose it in some other way is insane - different dive
computers use different models for the ID, so don't try to do some kind
of serial number or something like that)
For the Uemis Zurich, which doesn't use the libdivecomputer import, we
currently only set the model name. The computer does have some kind of
device ID string, and we could/should just do the same "SHA1 over the
ID" to give it a unique ID, but the pseudo-xml parsing confuses me, so
I'll let Dirk fix that up.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This also knows how to save and restore multiple dive computers in the
XML data, but there's no way to actually *create* that kind of
information yet (nor do we display it). Tested by creating fake XML
files with multiple dive computers by hand so far.
The dive computer information right now contains (apart from the sample
and event data that we've always had):
- the vendor and product name of the dive computer
- the date of the dive according to the dive computer (so if you change
the dive date manually, the dive computer date stays around)
Note that if the dive computer date matches the dive date, we won't
bother saving the redundant information in the XML file.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For now we only have one fixed divecomputer associated with each dive,
so this doesn't really change any current semantics. But it will make
it easier for us to associate a dive with multiple dive computers.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used to avoid some extra allocations by just allocating the dive
samples as part of the 'struct dive' allocation itself, but that ends up
complicating things, and will make it impossible to have multiple
different sets of samples (for multiple dive computers).
So stop doing it. Just allocate the dive samples array separately.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When this was first implemented the assumption was that a downloaded dive
that is to be merged with an existing dive would have the same time stamp.
But as Linus pointed out even back then, this does fail if a dive has been
merged with a download from a different dive computer before (think:
download from computer a, then download same dive from b, then improve
something in the parsing from computer a and try to redownload; the time
stamp could have changed).
This commit also fixes a silly omission in the merge_dives() function
(which ended up ALWAYS prefering the downloaded dive) and finally
implements the necessary changes to mark dives downloaded from a Uemis SDA
as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
THe Uemis SDA allows the user to set it up for salt water and fresh water
use. We should take this into consideration for the water pressure to
depth conversion.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will hopefully not be something we need often, but if we improve
support for a divecomputer (either in libdivecomputer or in our native
Uemis code or even in the way we handle (and potentially discard) events),
then it is extremely useful to be able to say "re-download things
from the divecomputer and for things that were not edited in Subsurface,
don't try to merge the data (which gives BAD results if for example you
fixed a bug in the depth calculation in libdivecomputer) but instead
simply take the samples, the events and some of the other unedited data
straight from the download".
This commit implements just that - a "force download" checkbox in the
download dialog that makes us reimport all dives from the dive computer,
even the ones we already have, and an "always prefer downloaded dive"
checkbox that then tells Subsurface not to merge but simply to take the
data from the downloaded dive - without overwriting the things we have
already edited in Subsurface (like location, buddy, equipment, etc).
This, as a precaution, refuses to merge dives that don't have identical
start times. So if you have edited the date / time of a dive or if you
have previously merged your dive with a different dive computer (and
therefore modified samples and events) you are out of luck.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This introduces the notion of merging two disjoint dives: you can select
two dives from the dive list, and if the selection is exactly two dives,
and they are adjacent (and share the same dive trip), we support the
notion of merging the dives into one dive.
The most common reason for this is an extended surface event, which made
the dive computer decide that the dive was ended, but maybe you were
just waiting for a buddy or a student at the surface, and you want to
stitch together two dives into one.
There are still details to be sorted out: my Suunto dive computers don't
actually do surface samples at the beginning or end of the dive, so when
you stitch two dives together, the profile ends up being this odd "a
couple of feet under water between the two parts of the dive" thing.
But that's an independent thing from the actual merging logic, and I'll
work on that separately.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This just re-organizes the dive merging code so that we expose a new
"merge_dives(a, b, offset)" function that merges two dives together into
one with the samples (and events) of 'b' at the specified offset after
'a'.
We'll want to use this if a dive computer has decided that the dive
ended (due to a pause at the surface), but we really want to just turn
the two computer dives into one long one with an extended surface swim.
No functional changes, but some independent cleanups due to the trip
simplifications.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't change any of the samples, we just don't plot (or consider for
dive time / mean calculations) the samples at the beginning or end of the
dive that are less than a certain threshold under water. Right now that's
an arbitrary 75cm which seems to Do The Right Thing(tm) for the dives I
tried this with - but I'm happy to look at other values if this causes
problems for people with dive computers I do not have access to.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a couple of helper functions to manage dive trips
("add_dive_to_trip()" and "remove_dive_from_trip()") and makes those
functions do the trip statistics maintenance (trip beginning times,
number of dives, etc).
This was needed because the dive merge cases for multiple dive
computers showed some rather nasty special cases: especially if the
new dive information has been loaded into an XML file with trips
auto-generated, merging several of these kinds of xml files with
multiple dives in several overlapping trips would completely confuse
our previous code.
In particular, auto-generated trips that had the exact same date as
previous trips (because they were generated from the same dive
computer) really confused the code that used the trip timestamp to
manage the trips.
Adding the helper functions allows us to get the general case right
without having to have each piece of code that handles trip
information having to bother about all the odd rules. It will
eventually also allow us to make the dive trip data structures more
logical: right now the dive trip list is largely designed around the
odd gtk model handling, rather than some more higher-level conceptual
relationship with the actual dives.
But for now, this keeps all the data structures unchanged, and just
modifies them using the new helper functions.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This requires a patched libdivecomputer that can return salinity of the
water the dive was conducted in. Experimental patches exist that implement
this for the OSTC. The code is designed so that it simply defaults to salt
water if libdivecomputer doesn't include the feature.
The patch also fixes the dive merge code to merge two other recent
additions to the dive structure (surface_pressure and visibility).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The default filename handling is broken in two different ways:
(a) if we start subsurface with a non-existing file, we warn about
the inability to read that file, and then we exit without setting the
default filename.
This is broken because it means that if the user (perhaps by mistake,
by pressing ^S) now saves the file, he will overwrite the default
filename, even though that was *not* the file we read, and *not* the
file that subsurface was started with.
So just set the default filename even for a failed file open.
The exact same logic is true of a failed parse of an XML file that we
successfully opened. We do *not* want to leave the old default
filename in place just because the XML parsing failed, and possibly
then overwriting some file that was never involved with that failure
in the first place. So just get rid of all the logic to push the
filename saving into the XML parsing layer, it has zero relevance at
that point.
(b) if we do replace the default filename with a NULL file, we need
to set that even if we cannot do a strdup() on the NULL.
This fixes both errors.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This enables plotting the ceiling in deco dives and also adds the
necessary code to the uemis importer. The only other dive computer this
has been tested with the OSTC and that needs a libdivecomputer patch in
order to provide the deco/ceiling information to Subsurface.
Fixes#5
We now throw away redundant events, just as we throw away other redundant
data coming from the dive computer. Events are considered redundant if
they are less than 61 seconds apart and identical.
This also improves the display of the remaining events in the profile as
we now show the value of the event, if it is present (for example for a
deco event we show the duration of the deepest stop).
Finally, for events that define a range (so they set the beginning flag
and assume and end flag some time later) we no loger show the triangle but
assume that some other code handles visualizing them (as happens for the
ceiling events).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dive data contains the surface pressure prior to the dive, and that is
what we need to compare p_amb_tol to, not the standard 1013mbar.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used to have very spotty logic for picking the dive trip when
merging two dives. It turns out that that spotty logic almost never
really matters, because in practice you'll never hit the situation of
merging two dives with different dive trips, but it *can* happen.
In particular, it happens when you use multiple dive computers, and
end up loading the dives from one computer on top of the dives of your
other computer. If the clocks of the dive computers was set
sufficiently close to each other, the dive merging logic will kick in
and you may now have slightly different times for the dives that get
merged, and the trip merging logic got *really* confused.
The trip management also depends on the trip dates being updated
correctly when the dives associated with a trip are updated (whether
added or removed), and the trip merging code did none of that.
This fixes it all up. Hopefully correctly.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Lubomir's commit aec904b612 broke the Add
Dive menu item: The Edit Dive dialogue didn't show up after the initial
dialogue.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Turns out we had a data field for visibility as a length unit - but never
used it. I can never guess how much visibility we actually had on a dive -
but I think most everyone can assign a rating between abysmal (zero stars,
"I couldn't read my dive computer even right in front of my mask" - trust
me, I had some of those dives) to amazing ("five stars, I could see farther
than I though possible" - and I had one or two of those, too). So I
changed this to an integer and am re-using the star infrastructure we have
for the overall dive rating.
When displaying this I was dismayed that we are running out of space in
the "Dive Notes" notbook. So I moved this to the "Dive Info" notebook.
This is not consistent and not logical. I think we need to revisit the
notebooks and think about what we want to display where.
While adding the infrastructure to manually enter the visibility I went
ahead and added the ability to manually enter the air temperature as well
(that was one of the things missing in the previous commit).
Fixes#7
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
linux.c, macos.c, windows.c now contain
subsurface_os_feature_available() that can accept an enum type
os_feature_t defined in dive.h.
The function can be useful to check if a specific global feature
is available on a certain OS version.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far we only looked in the a local subdirectory, but once Subsurface has
been installed, we don't need to change the search path for translation
files anymore.
Fixes#2
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The MacOSX applications bundle needs to be told where to bind the
text domain from.
Also copy the gettext .mo files in the install-macosx target.
[Dirk Hohndel: minor change in main(): move the path declaration to
the beginning of the function]
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a few fields that we parse, but more importantly it also tries
to dynamically decide if the sample temperatures and pressures are in
imperial or metric units.
Dirk suspects that DivingLog generally always does everything in metric,
and the reason why he has crazy sample data in imperial units (both for
pressure and temperature) may be due to a bug in the early Uemis
importer for DivingLog.
Which would actually make a lot more sense than DivingLog really being
so insane on purpose.
Anyway, Dirk's brother Jurgen seems to have everything in metric units,
which would be much saner. Maybe we should throw away the support for
insane DivingLog files entirely, since it is possible that the only use
ever of the possible source of that bug was Dirk's use of the Uemis
importer.
But for now, we end up just guessing. Current guesses:
- water temperature is below 32 dgC, so 32+ degrees is in Fahrenheit.
- tank pressures are below 400 bar, so higher values than that must be
psi.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Only files that are opened should be considered r/w. Files that are
imported should be treated as if they were r/o.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For unicode command line characters Windows uses UTF-16, while Glib
and GTK use UTF-8. To solve that we retrieve the command line
via __wgetmainargs() and use g_utf16_to_utf8() to convert each argument.
The used method should support wildcards passed as arguments
(e.g. *.xml).
Two new, OS abstracted functions appear in linux.c (NOP), macos.c (NOP),
windows.c:
subsurface_command_line_init(...)
subsurface_command_line_exit(...)
which are being called in main()
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The existing code (both my first single dive delete and then Lubomir's
multi dive delete code) had way too many issues and was just painfully
inefficient.
This new code takes a radically different approach and mostly ignores the
Gtk tree model (as that gets recreated after a delete, anyway) and instead
is linear time on the number of dives in the list. It does do its best to
maintain the existing selection and the expand state of tree model (the
latter isn't possible if we have switched to the list model).
Many thanks to "Lubomir I. Ivanov" <neolit123@gmail.com> for his work on
this - this commit actually contains a few lines out of one of the patches
that he wrote.
Reported-by: "Lubomir I. Ivanov" <neolit123@gmail.com>
Tested-by: "Lubomir I. Ivanov" <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This brings in the code to download dive information directly from a Uemis
Zurich dive computer.
The implementation contains a major hack that hooks the uemis code into
the same data structures used to setup libdivecomputer. This gives the
best result for the user, but is not something that I like as a long term
solution as it relies on internal libdivecomputer data structures.
Especially when asking non-developers for help debugging a problem it can
be extremely useful to have debugging output not go to the console but to
a log file instead.
This just adds the infrastructure to create (and close) such a file. No
changes to the debug output are made.
All this is of course #ifdef'ed out.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The "cylinders_equal()/copy_cylinders()" functions were buggered, and
only checked (and copied) the cylinder type. That was on purpose, since
you do want to be able to change the type of a cylinder without changing
the gasmix of the cylinder.
HOWEVER, the reverse is also true: you may want to change the gasmix of
a cylinder without changing the type.
So it's not that the type of the cylinder is special - it's that the
type and the gasmix should be considered separately.
Do that properly for the equipment editing case.
Reported-by: Ďoďo <dodo.sk@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If we have no explicit cylinder info at all (it's normal air, no size or
working pressure information, and no beginning/end pressure information),
we don't save the cylinders in question because that would be redundant.
Such non-saved cylinders may still show up in the equipment list because
there may be implicit mention of them elsewhere, notably due to sample
data, so not saving them is the right thing to do - there is nothing to
save.
However, we missed one case: if there were other cylinders that *did* have
explicit information in it following such an uninteresting cylinder, we do
need to save the cylinder information for the useless case - if only in
order to be able to save the non-useless information for subsequent
cylinders.
This patch does that. Now, if you had an air-filled cylinder with no
information as your first cylinder, and a 51% nitrox as your second one,
it will save that information as
<cylinder />
<cylinder o2='51.0%' />
rather than dropping the cylinder information entirely.
This bug has been there for a long time, and was hidden by the fact that
normally you'd fill in cylinder descriptions etc after importing new
dives. It also used to be that we saved the cylinder beginning/end
pressure even if that was generated from the sample data, so if you
imported from a air-integrated computer and had samples for that cylinder,
we used to save it even though it was technically redundant.
We stopped saving redundant air sample information in commit 0089dd8819
("Don't save cylinder start/end pressures unless set by hand").
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Removed start and end in save_cylinder_info(). These two variables are no
longer used.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
