This patch creates the possibility of viewing the individual sensor
values when the po2 button on the profile toolbar is activated. This
follows exactly the procedure for optionally displaying the setpoint
values while viewing po2. A checkbox in the preferences panel determines
whether sensor information is shown. By default it is set to OFF. When
checked, and the po2 button is activated, sensor1 values are shown in
grey, sensor2 in blue and sensor3 in brown.
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Lots and lots and lots of header files were being included without being
needed. This attempts to clean some of that crud up.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When a CCR dive is viewed and the toolbar button for PO2 is activated,
both the PO2 (green line) and the O2 setpoint (red line) are shown.
This allows evaluation of the PO2 in the CCR loop with respect to the
pre-configured O2 setpoint.
The setpoint graph can be disabled from the Preferences/Graphs tab
by checking the appropriate checkbox.
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fix various discrepancies in the capitalization format, as we are using
'down format' for titles and actions.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It was impossible to guess what this column was just by looking at it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was missing on the UI and it was really hard to guess what it was.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a toolbox icon to turn on a tissue plot inspired by the bar
graph of the Sherwater Petrel,
It shows the inert gas partial pressures for individual compartments. If
they are below the ambient pressure (grey line) they are shown in units of
the ambient pressure, if they are above, the excess is shown as a
percentage of the allowed overpressure for plain Buehlmann. So it has the
same units as a gradient factor. Thus also the a gradient factor line (for
the current depth) is shown.
The different tissues get different colors, greener for the faster ones and bluer
for the slower ones.
Positioning and on/off icon action still need some tender loving care.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch introduces a new structure holding partial pressures (doubles in bar) for
all three gases and a helper function to compute them from gasmix (which holds fractions)
and ambient pressure. Currentlty this works for OC and CCR, to be extended later to PSCR.
Currently the dive_comp_type argument is unused.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Lets just use pO₂ instead of PO2, ppO2, ppO₂, PO₂.
They all mean the same, but it's better to be
consistent
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The original name was a really bad choice as we have a 'diveid' as part of
struct divecomputer - and that is not the diveid that is being used here.
Instead we use the 'id' member of struct dive which holds the "unique ID"
for this dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit renames getDiveById to get_dive_by_id, and it also removes the
Q_ASSERTS and if(!dive) return that the callers of this function were
calling. If it has a Q_ASSERT this means that the dive must exist,
so checking for nullness was bogus too. I've changed the assert (done
in a silly C-Way.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
display.h: dc_number is unsigned int, thus a couple of warnings
may pop-out.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The selection logic was a bit random: some places would return NULL if
the dive computer index was out of range, others would return the
primary dive computer, and actually moving between dive computers would
just blindly increment and decrement the number.
This always selects the primary computer if the index is out of bounds,
and makes sure we stay in bound when switching beteen dive computers
(but switching between dives can then turn an in-bound number into an
out-of-bounds one)
Fixes#464
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I know everyone will hate it.
Go ahead. Complain. Call me names.
At least now things are consistent and reproducible.
If you want changes, have your complaint come with a patch to
scripts/whitespace.pl so that we can automate it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was done during an IRC hacking session with Tomaz.
It compiles, it shows something but not the right graph.
Committed here so Tomaz and I can continue to work on it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In Qt5, Qt doesn't define TRUE/FALSE anymore, so we need to stick to
stdbools to have Qt5 builds working.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code of the context menu and the gas change event callback is mostly
the same as the old profile, with minimum modifications, as this changes
the order of the code on the callback to make it a bit saner (declare
variables first, call code later).
This also fixes a bug on the model that was not cleaning itself in the
correct way after a call to clear.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* This should never be called with a NULL dive.
* The dc variable was set then never used.
* We now have a unique id for each dive, but we can't simply not
repopulate the model in setDive as the old comment might make you
consider, as otherwise the dataModel will reference already freed data
in pInfo.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch does a few things:
1 - reset the model when user closes the dive file
2 - connects the 'rowsAboutToBeRemoved' in a way that the graphics can
remove their polygons too
3 - adds a 'clear' virtual method so items that don't follow the rules can
clean themseves up.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Add missing improvements::diveId variable member to the initialize list.
* Cleanup DivePlotDataModel::pInfo structure instead only one member.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Created a method to check if calculations should take place
taking into consideration what changed on the model. if the
model changes *everything*, them, all calculations should
be done, but if just some of the columns of the model are
changed, only those columns should trigger an visual update
on the items.
In theory this patch looks right, but something is wrong (
calculations are not being made. ), so I'll commit this any
how, and fix on the next commit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit is rather big, and I forgot to cut it in pieces.
The first part creates a new 'calculate_gas_information' that will not
fill the profile_info->maxpp member ( that should be removed from it as
soon as the new dialog is finished ). The reason for that is that all of
the profile data will be calculated and the graph needs to update
dynamically, so whenever the settings changes, I ask for the model which
is the biggest graph and replot only the ones we need.
The second part adds a new animation function 'animdelete' to fade-out and
delete the item when it's done. the old function 'hide' did just that but
a hide shouldn't delete anything.
The third part is preferenes awareness for the PP graphs. I created two
new functions that receive the settings key for visibility and use the
QSettings to show / hide them. This also works quite well for the axis;
if no graph is visible, the axis will also hide itself.
The fourth part is colors. The pp graphs now have the correct colors.
And a bit of code cleanup too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Important to note that no Partial Pressure Graph handles
settings yet.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Using the PartialPressureGasItem the addition of a new partial plot
is very easy.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the beginning of the partial gas pressures, there's
two more. but this code uses a good part of the Model View system,
and it's way clearer than the old one. Luckly the other 2
missing items will be even more clear ( the diffs ) to do,
because I just need to create a new PartialPressureGasItem and
set the properties. <3
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This item plots the DiveCalculatedCeiling over the profile. I still need
to add the Calc All Tissues version.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This just adds the texts for the gas profile. I've also added a method on
the dataModel() to return the diveId of the last used dive in a way that
the other methods can use it.
This code is almost 1-to-1 with the old one, a bit of thinkering can be
used to merge this loop with the upper one.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the Gas Pressure Graph with the related Model Changes
to access the cylinder index, pressure, interpolated pressure
and SAC.
The plot does not correctly plot its color right now but it's not hard to
do.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added missing information about the pressure to the model; this shows that
I didn't do something right, as the model has 0 pressure information. Need
to fix that on the next commit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is just to make it more obvious when new issues get introduced. The
build should always be free of warnings...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Another futile attempt to cleanup the code and make coding style and
whitespace consistent. I tried to add a file that describes the key points
of our coding style. I have no illusions that this will help the least
bit...
This commit should ONLY change whitespace
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This model encapsulates the plot_info struct and provides
a consistent way to show it using the Qt Model view system
in the C++ and QML way. For a QGraphicsItem that should show
a Profile, this is the start.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
