The strings were marked for translation on assignment to the variable, but
then the variables were used untranslated.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should fix a crash on Windows when importing Suunto DM4 dive logs.
(Timezones are not handled properly.)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
xslt/commonTemplates.xsl was missing from the install targets
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fix permissions on Ubuntu and relative instead of absolute default times
in planner
This contains two changes: One documents the fact that in the planner the
default for time is relative and an absolute time needs an @ sign.
The other hopefully explains how to solve permission problems for USB
devices on Ubuntu: I am told, an USB dongle that pretends to be a serial
port by default does not have the required permissions for the standard
user to write. The transfer then fails with an 'obscure' error message.
The transfer works if subsurface is run by root (which obviously is a bad
idea) or with chmod. Unfortunately, at least Ubuntu 'fixes' permissions
on reboot. So one either has to fiddle with this (seems to be more
complicated) or add the user to the group 'dialout" which gets write
permissions to serial lines.
This is in theory. I don't have access to an Ubuntu installation to see if
all this is indeed the case. That's why I did not send the patch in the
past. But I think this is still better than what we have so far.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When diving in areas where there are risk of boats passing above you,
its common practise to do the last stop at 6m to better stay out of
harms way. When doing o2-deco, it doesn't matter for the deco time if
you are doing all the time at 6m, due to that you don't have any inert
gas in your breathing gas.
This code is a reintroduction of 0b8462bd lost somehow between
a70a8898..8fae0031
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Most of the new stuff from UI perspective should now be documented.
Bumped also the doc version number optimistically.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Do not display error message when user cancels upload to divelogs.de.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This enables all languages for the moment - let's see if we can get them
all ready for the 3.1 release.
It also fixes the use of \% instead of %% in one of the strings.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This shows a dialog indicating the success or failure of divelogs.de
upload. Currently the raw XML returned from the SOAP request is
also displayed.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will take the DM4 XSLT into use.
In the future it is quite likely that we will have to start using
something more specific on top of the root element name to identify dive
log formats. But as "Dive" is currently a unique root element name for
us, this suffices for now.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This XSLT can be used when exporting single dives from DM4 and importing
them to Subsurface.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The events that had same time stamp were reversed in order on every new
load of the log file. This patch will keep the order static. (Changing
order is annoying when using version control to store the logs.)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This literally just creates the dialog and does not hook things up with
the dive list.
The idea is to abstract out the idea behind the invalid dives to allow the
user to select / deselect all kinds of dives and then do statistics on
the selected ones.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fairly straight forward, so far just one tiny bit of code restructuring,
everything else separated cleanly.
Added statistics-gtk.c and statistics.h
This should make no difference to functionality.
Cherry-picked from Qt branch; fixed merge issues mostly caused by
dive_tags and Makefile changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Surprisingly straight forward, just a couple of places where we really mix
significant logic with UI code (for example setting the window title).
I had to move amount_selected from display-gtk.h to display.h - I guess
the number of dives that are selected is UI independent. But I wonder if
we still will track this as a global variable in a Qt UI (since the Gtk
selection logic is the main reason this existed in the first place).
Added a new info.h files for the necessary declarations.
This should make no difference to functionality.
Cherry-picked from Qt branch; fixed merge issues mostly caused by
dive_tags and Makefile changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
dive_trip_list is simply a global variable, declared in dive.h.
The clear_trip_indexes() helper is purely logic and was moved to
divetrip.c - but then not deleted in divetrip-gtk.c
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the downside of having to track our own selection state. We now
have a class of dives that potentially isn't known to Gtk as we aren't
adding them to the TreeView. So we need to make sure that their selection
state is consistent by deselecting them (either when they are marked as
invalid OR when we change preferences to no longer show invalid dives).
And because Gtk sends out another set of selection events when clearing
the TreeView (not sure why), we also need to make sure that their
selection state isn't reset to selected by mistake when the divelist is
recreated.
A bit of a pain, but it seems to work now and be consistent.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is trivially true if there is only one dive.
With this change the logic which tags apply after editing is much easier
to understand.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the code much cleaner and also reuses the strings in the
dtag_names array. This means the tag names are all lower case everywhere,
but that seems like an acceptable trade-off.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I forgot that in commit 5f03a6f. Oops.
Reported-by: Ďoďo <dodo.sk@gmail.com>
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For dives where divecomputers haven't provided us with a cns, we
calculate our cns accumulated during that dive based on a simple table.
We also check if we did a dive in the prior 12 ours and grab the cns
from it and calculate how much of that still affects us.
[Dirk Hohndel: a couple of small changes: remove unnecessary check of cns
values in the samples of the first dive computer, changed
the way we determine the 'previous dive' and used the end
time of that previous dive for the decay calculation]
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also trim the redundant "Dive" text from "Lake Dive", "Pool Dive", ....
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Only call upload_all_dives_divelogs_cb() if we have both libzip and xslt.
Reported-by: Jozef Ivanecký (dodo.sk@gmail.com)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The menu entry for upload to divelogs.de was missing. Also renamed
the divelogs context menu entry to something less generic.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And as we need the names for that, simplify the way we show the tags in the
Dive Info tab (and mark them for translation while we are at it).
In the process I renamed the constants to DTAG_ from DTYPE_ (and made
their nature as being just bits more obvious).
Also mark the box on the Info tab "Dive Tags", not "Dive Type".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This started out as a way to keep dives in the dive list but being able to
mark them as 'invalid' so they wouldn't be visible (with an option to
disable that feature).
Now it supports an (at this point, fixed) set of tags that can be assigned
to a dive with 'invalid' being just one of them (but one that is special
as it gets some additional support for hiding such dive and marking dives
as (in)valid from the divelist).
[Dirk Hohndel: merged with the latest code and minor changes for coding
style and consistency. Ensure divelist is marked as
modified when changing 'invalid' tag]
Signed-Off-By: Jozef Ivanecký (dodo.sk@gmail.com)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Let's use the shiny new UTF-8 encoding on divelogs.de export.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Relatively straight forward, just a handful of places where we call
show_error() (a UI function) from the logic code. In the process I noticed
a few places where error returns weren't dealt with correctly.
Added a new planner.h files for the necessary declarations.
This should make no difference to functionality.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Most of the warnings are IMHO false positives:
e.g.: an enum variable is initialized in a switch statement that has a case for
each possible enum value - yet gcc 4.8 warns that it could be used
uninitialized;
or: two variables are initialized together in the code - second one of them
is previously initialized to -1 at declaration time, both are initialized
in an if (second one == -1) clause - so they are guaranteed to both be
initialized...
I did not "fix" those as the code is actually correct.
But there are three spots where it catches things that could indeed go wrong
(with odd input data in one of them).
This commit also adds a check to only call g_type_init() for older versions of
glib as in newer ones it is deprecated.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is simplistic & brute force: any function that touches Gtk related
data structures is moved to divelist-gtk.c, everything else stays in
divelist.c.
Header files have been adjusted so that this still compiles and appears to
work. More thought is needed to truly abstract this out, but this seems to
be a good point to commit this change.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove the boolean parameter from parse_file; the code is more readable
by having an explicit call to set_filename() where necessary, rather
than a boolean parameter.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
When diving in areas where there are risk of boats passing above you,
its common practise to do the last stop at 6m to better stay out of
harms way. When doing o2-deco, it doesn't matter for the deco time if
you are doing all the time at 6m, due to that you don't have any inert
gas in your breathing gas.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
