Decode the gasmix data into a sane format when creating the event, and
add the (currently unused) ability to specify a gas change to a
particular cylinder rather than (or in addition to) the gasmix.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When multiple graphs are displayed at the same time they end up being printed on top of each other.
Scale the lowest graph to accommodate the tankbar.
Add an intermediate scaling step to the depth axis when pp graphs or the tissue graph are visible.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a graphical representation of tissue loadings at the current moment during the dive
to the tooltip box. The layout is inspired by the Sherwater Petrel.Add tissue saturation plot to tooltip
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a toolbox icon to turn on a tissue plot inspired by the bar
graph of the Sherwater Petrel,
It shows the inert gas partial pressures for individual compartments. If
they are below the ambient pressure (grey line) they are shown in units of
the ambient pressure, if they are above, the excess is shown as a
percentage of the allowed overpressure for plain Buehlmann. So it has the
same units as a gradient factor. Thus also the a gradient factor line (for
the current depth) is shown.
The different tissues get different colors, greener for the faster ones and bluer
for the slower ones.
Positioning and on/off icon action still need some tender loving care.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch introduces a new structure holding partial pressures (doubles in bar) for
all three gases and a helper function to compute them from gasmix (which holds fractions)
and ambient pressure. Currentlty this works for OC and CCR, to be extended later to PSCR.
Currently the dive_comp_type argument is unused.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Using QToolBar I was able to remove much of the dead code
from the mainwindow.ui xml file by transforming the QToolButtons
into actions and loading them dynamically in the .cpp code.
I couldn't use the designer for this ( as I wanted ) because
Qt has no notion of ToolBars outside of the areas where the
MainWindow should have one, and we use it in a very different
area.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Basically we could end up in a situation where the plotInfo is no longer
valid, yet the model changes and triggers a redraw before the new data is
passed into the TankBar.
Instead of chasing that race condition it seemed much easier to just copy
the plot_data entries and the gas information in the dive.
Fixes#716
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This worked flawlessly on Mac and Linux, but on Windows I needed to add
the explicit setVisible here - not quite sure why.
Fixes#710
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Turns out that the fix in commit f7119bdccf ("Planner: make sure no old
handles are around when entering Add/Plan") was incorrect. We ONLY want to
remove the existing handlers when we re-plan a dive, NOT when we call add
or plan.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In some cases we don't appear to remove all of the old handles from the
scene and end up showing a handle from a previous instance of the planner
in the upper right corner of the profile.
This patch makes sure that we remove any stray handles that might still be
around before entereing plan or add mode.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In some circumstances Qt will draw a really thick border around
rectangles. This explicitly makes the border of the tank bar thin.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Which actually makes the code much clearer as now the object is at the
correct spot on the canvas and the positions inside are relative to that.
No more magic gradiants starting at "92"
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also restructures the code a bit to make it a little more sane and changes
the colors slightly.
With these changes I think we can claim that this
Fixes#557
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This shows a color-coded bar at the bottom of the graph that corresponds
with the active gas.
Todo:
- text that explicitly states gas on the left edge of the bar
- better vertical positioning of the bar
- ability to turn this on and off
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It was too easy to remove a picture by mistake, not anymore.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Select the picture, press delete, profit.
[Dirk Hohndel: removed the stray hunk that snuck into this patch]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This prevents zooming out to more than max in the planner. Using a Mac
MagicMouse it happens at times that the finger slides on the mouse while
dragging a waypoint which can result in zooming out further than max.
Fixes#695
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While on Linux it was drawn as fine 1px line, on Mac it came out rather
fat and obnoxious by default. With this it's always set to a very thin
line.
This still needs more work, but let's leave it where it is for Beta 5.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was missing from the conversion from the oldPlanner
to the new one, and it also works ok on the profile.
One thing is missing is the Labels on the bottom / left
saying which position it is, but it's already userful.
Fixes#674
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had pointers to data structures on the stack which we frequently
reallocated. These data structure contain basically a filename and an
offset. We then create a hash of the pointers to those datastructures with
the filename being the key. And then we passed those pointers around
through a Qt model(!!!) only in order to then later look up by filename
what the offset might be.
I am at a loss for words for the lunacy behind this design.
How about we just remember the offsets and pass the integers around?
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Because of the way deleteLater() is implemented, the pictures need to be
hidden, otherwise they might stay around at the wrong time (e.g., when
printing).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we disconnect the picture releated signals then in dive add and dive
plan mode the pictures from the last shown dive could appear on the
profile. That's not cool.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Almost invisible, mostly looking like an odd bug in the profile code,
there was a tiny red line at depth 0 in the planned profile. Turns out
that was the missing mean depth. We didn't populate enough data in the
dive computer of the dive we generated from the plan (and the length of
the depth line was incorrectly determined by the duration of the dive
instead of the duration stored in the dive computer).
Fixes#570
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The error with 'ungrabMouse' warning that we got was because
we were removing an item that had the mouse grab instead of
waiting a few milisseconds so it won't be the mouse grabber
anymore.
So I'v used the Animations::hide() to get rid of it, and
since it worked well, I'v also added a Animations::show()
method to display it in a good fade-in way.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the remove_picture functionality, with code
shamelessy stolen from remove_event, and hoock it
up with the interface.
Fixes#650
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the idea is to remove the picture in the future, we need
to not hold the row on the model, as when we delete one, the
other pictures will change the row. but the QUrl is unique.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch hides a picture from the dive, it should actually
remove it, but because I didn't found a quick way to remove
a picture from the dive yet, it just hides it.
To remove a picture from the dive, the DivePictureItem has to
remember the QUrl of the original file, to remove that from the
model, and currently it only has the QPixmap.
this can be for 4.2.1 or we can postpone 4.2 a tiny bit since this
is a important feature.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was preventing the recalculation of the ticks, making the
line static when we enabled or disabled the PP graphs.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
"ups", as I did this in Metric system I forgot to update
to imperial when the user selected it.
Fixes#665
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
[Dirk Hohndel: took only one of the two parts and adjusted commit message
accordingly]
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This simplifies so much of the code that we were using to control
the visibility of the HeartRate. now things are much saner.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This breaks compatibility with old preferences, but it's a single
key and not that very important so I don't think it's a bigger issue
I've renamed prefs.animation to prefs.animation_speed to denote
that it's a value, and not a state.
Also, fixed the places that were treating it as a state (on/off)
to treat it like a correct value.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The pictures were being plotted in print mode, the main
reason for this was that when we entered print mode and
had already a picture plotted, the method would return
before removing them from the screen. This fixes it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
for some reason we did a if(true) setValue(true) else serValue(false)
now we just use the value to set the value. =p
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I don't know if this fixes anything, but it is asked of us to
do that by the Qt docs.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
current_dive is the selected dive, and displayed_dive is the one we are
currently drawing. They are quite often the same one, but not in the
case of adding a dive for example.
This fixes potential null pointer dereferences in the case of a blank
divelist, and makes sure we use the correct data in the case of adding
and planning dives.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Back in 4.0 we hide all gaschange events during the first 30 seconds,
not just gaschange events on second 0. Eg, the OSTC3 emits its gaschange
event on the first sample, which can be 2, 10 or 30 seconds into the
dive.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace get_gasmix_from_event and get_gasidx with get_cylinder_index.
get_cylinder_index actually knows about both types of gaschange events
and the difference between them.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For the info box, we can't use the event data, because its not 1:1
mapped to whats in the cylinder and what we actually switched to. Use
the plot_data here we already calculated what we are switching to.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Q_FOREACH will expand and already creates a copy of the
contained container, so this is just a waste of cpu cycles
and also increases a tiny bit the memory consumption.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes sure that YAxis is not expanded to cover heart rate
when it is displayed on profile panel.
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I don't like that the event structure includes the variable length array.
That really makes it a pain to change the name of an event (on the flip
side, freeing events is easier I guess).
Anyway, to correctly rename an event we need to actually remove the event
from the correct dc and then add a new event with the new name. The
previous code was insane (it only worked if the new name was of smaller or
equal length, otherwise it had a beautiful buffer overflow).
And of course we need to do this both for the current_dive and the
displayed_dive.
Fixes#616
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use a macro that works to get the current DC.
Fixes#613
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All animations are now on the Animations namespace, which resulted in a
bit of code cleanup, which is nice.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This seems to be needed for the correct print of the profile,
What was happening on the print code was that the profile even in print
mode was doing animations, and we were getting a frame of it and trying to
print it.
Also, a bit of code cleanup.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I don't know why the plot_info was walked backwards - for our purposes
walking forward needs to make a lot more sense. And the event nicely goes
away when the diveplan gets modified and the displayed_dive gets reset.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code hoocks the pictures with the preferences change.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds the toggle picture button and hoocks
it up with the rest of the code. I'v also changed a call
from ProfileWidget because it caused errors on the ui
generated code, where it would try to call an still-to-be
instantiated object.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
[Dirk Hohndel: scaled PNG files and added the code to show them and
to make them somewhat bigger]
Signed-off-by: roberto forini <forini.r@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This seem to work better, but it misses a couple of items at times (for
example the highest label on some of the axis).
Needs lots more testing.
See #590
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the first dive we end up rendering is the dive currently shown, the
info overlay would end up being printed which looks really silly.
See #590
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
No longer use the dive structure that is passed in but instead always use
the displayed_dive to display things.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't have a concept of what to do when plotting multiple dives, so
let's not pretend and remove all the messing around with lists.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The initial gas change event is really special - it just specifies the gas
mix from the dive computer. So don't show it as an event if that already
matches the initial gas.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes the "impossible to work with" planner with the mouse
now the dive will only grow and not shrink untill you release
the mouse.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Those are ligther colors and it should be a better choice
a way better choice is to ask for a designer wich color to use
but most of my minions are busy.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I was messing with the origin point, making the dive picture
be a tiny bit to the right. This removes the rotation, but
that was also not very good.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes the click on pic == open picture browser works
also on the profile instead of only on the list view..
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In a dive, when you choose a very low GFlow (like 5 or 9) and a trimix
with quite some He (12/48 in the example) and descend fast, the ceiling
seems to do strange things in the first minutes of the dive (very very
deep for example or jumping around).
To understand what is going on we have to recall what gradient factors do
in detail: Plain Buehlmann gives you for each tissue a maximal inert gas
pressure that is a straight line when plotted against the ambient
pressure. So for each depth (=ambient pressure) there is a maximally
allowed over-pressure.
The idea of gradient factors is that one does not use all the possible
over-pressure that Buehlmann gives us but only a depth dependent fraction.
GFhigh is the fraction of the possible over-pressure at the surface while
GFlow is the fraction at the first deco stop. In between, the fraction is
linearly interpolated. As the Buehlmann over-pressure is increasing with
depth and typically also the allowed overpressure after applications of
gradient factors increases with depth or said differently: the tissue
saturation has to be lower if the diver wants to ascent.
The main problem is: What is the first stop (where to apply GFlow)? In a
planned dive, we could take the first deco stop, but in a real dive from a
dive computer download it is impossible to say what constitutes a stop and
what is only a slow ascent?
What I have used so far is not exactly the first stop but rather the first
theoretical stop: During all of the dive, I have calculated the ceiling
under the assumption that GFlow applies everywhere (and not just at a
single depth). The deepest of these ceilings I have used as the “first
stop depth”, the depth at which GFlow applies.
Even more, I only wanted to use the information that a diver has during
the dive, so I actually only considered the ceilings in the past (and not
in the future of a given sample).
But this brings with it the problem that early in the dive, in particular
during the descent the lowest ceiling so far is very shallow (as not much
gas has built up in the body so far).
This problem now interferes with a second one: If at the start of the dive
when the all compartments have 790mbar N2 the diver starts breathing a
He-heavy mix (like 12/48) and descents fast the He builds up in the
tissues before the N2 can diffuse out. So right at the start, we already
encounter high tissue loadings.
If now we have a large difference between GFhigh and GFlow but they apply
at very similar depth (the surface and a very shallow depth of the deepest
ceiling (which for a non-decompression dive would be theoretically at
negative depth) so far) it can happen that the linear interpolation as
opposite slope then in the typical case above: The allowed over-pressure
is degreasing with depth, shallower depth do not require lower gas loading
in the tissue (i.e. can be reached after further off-gasing) but but
tolerate higher loadings. In that situation the ceiling disappears (or is
rather a floor).
So far, I got rid of that problem, by stating that the minimum depth for
GFlow was 20m (after all, GFlow is about deep stops, so it should better
not be too shallow). Now the dive reported in ticket #549 takes values to
an extreme in such away that 20m (which is determined by
buehlmann_config.gf_low_position_min in deco.c) was not enough to prevent
this inversion problem (or in a milder form that the interpolation of
gradient factors is in fact an extrapolation with quite extreme values).
This patch that gets rid of the problem for the dive described above but
still it is possible to find (more extreme) parameter choices that lead to
non-realistic ceilings.
Let me close by pointing out that all this is only about the descent, as
it is about too shallow depth for GFlow. So no real deco (i.e. later part
of the dive) is inflicted. This is only about a theoretical ceiling
displayed possibly in the first minutes of a dive. So this is more an
aesthetically than a practical problem.
Fixes#549
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Lets just use pO₂ instead of PO2, ppO2, ppO₂, PO₂.
They all mean the same, but it's better to be
consistent
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Its great to be able to see the planned "turn pressure", EADD at
different points and so on.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This can't be the only dive computer, of course. Goes nicely with the
ability to reprder them.
Fixes#551
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is needed if something has changed that requires a redraw, but the
plotDives() function can't tell (for example when a dive computer has been
deleted and there's now a different DC in the same spot, with the same
number - see next commit).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
warning: 'ProfileWidget2::someVariableName' will be
initialized after [-Wreorder]
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also change the on file XML to be even easier to read by making it a
duration as well (which gets us '32:34 min' instead of un-typed seconds).
This is backwards compatible, it will happily read what was written with
the previous commit).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Subtle change in function name from Qt4 to Qt5
setAcceptsHoverEvents -> setAcceptHoverEvents
Now Subsurface builds with Qt5 again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It makes no sense to store a 64bit time stamp with every picture. Even the
32bit offset (in seconds) from the dive start is WAY overkill. But
switching to that makes the code much more simple in a number of spots.
And makes what is saved to the XML file easier to read, too.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the pictures are too close to each other, spread them out a bit more.
This seems to give a reasonably pleasant layout.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch rotates the picture a bit, so it looks like it was
splattered around the profile.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a drop shadow on the picture. a real blurry shadow
could be much better, but without OpenGL it's too costly to calculate
the shadow for each picture.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the picture looks a bit more like a real paper picture
shadow's missing, though.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a subtle animation when the picture gets hovered
with the mouse, and restored to it's original size when mouse exits
the image area.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
ScaleTo animation will scale or shrinks an graphical element in an
animated way. This is going primarelly to be used on the pictures on the
profile, but can be used on anything else later.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After the switch to a central event decoder and just return gasmix from
that we printed things in permille, eg. EAN1000 and 180/550 which looks
kinda strange.
This fixes that by using gasname instead to give the gas a name.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is kind of a random cut off, but if plotting the dive takes more than
a second and TTS/NDL is on, we force it off. Because the algorithm for
that is fundamentally quadratic in nature it can take a VERY long time -
getting users to think something is broken.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It plots in the wrong place for now, because I need to change the model a
bit. But it shares the same pixmap with the other widget which is nice. :)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Ignore the warnings for now, this patch connects and disconnects the (not
done yet) plotPictures() method.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to call this as slot it needs to have defaults for all arguments.
So we need to change the gasmix into a pointer - which is actually better
as this allows to easily pass a NULL pointer when we want to continue to
use the previous gas.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should fix the infinite recursion on OSX and also clean a lot of
code, which is also very nice. <3
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is step one of many to use gasmix instead of int o2/he.
Right now some of these changes look ridiculous because after changing a
few lines we immediately go back to o2 = get_o2(gas). The reason is that I
wanted to convert a hand full of functions at a time. So in this commit I
only change validate_gas(), get_gas_from_events() and get_gasidx() to use
a struct gasmix instead of int o2, int he.
This state builds and survived some mild testing. Let's continue on top of
that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We should never pass permille values around as integers. And we shouldn't
have to decode the stupid value in more than one place.
This doesn't tackle all the places where we access O2 and He "too early"
and should instead keep passing around a gaxmix. But it's a first step.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Staring at the stack trace it seems that it gets into an infinite
recursion when trying to recalculate after being alerted to a change on
the ruler. I cannot recreate this here (not on Linux, not on Mac), but
here's a random attempt to prevent the issue: simply refuse to recalculate
the ruler while in Add or Plan mode.
Crude, but might show us if this really is the issue. Otherwise it's easy
enough to revert this change. The qDebug() in there should tell us if
people on a Mac do indeed see this even without moving the ruler around in
Add or Plan mode.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to create them, even if we don't display ( only because it
was a pain to correctly track them from the model ) - so, hide them
if it's not entered by mouse, but a deco one.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When switching from PLAN or ADD mode to PROFILE, we
kept the dive handlers visible, not anymore.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make the infobox invisible in planner (it really doesn't provide a lot of
useful info while planning a dive and more likely gets in the way).
Make the calculated ceiling always visible in planner and add mode.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
for some reason the next selected dive is NULL after cancelling the
plan. I'm investigating.
This patch fixes the show of the empty profile and it also untangles
some parts of the code, keeping the mainwindow where it should belong
: the mainwindow.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch paints the dive red if the user is breaking ceiling
on the planner - it's quite fast, it analizes the depth over the
max(tissue_1 .. tissue_16) and changes the color of the profile.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the movements from the lines when added / removed
SO much better.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a flag to only recalculate the axis when needed.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is working in the wrong way, mostly because I'm setting the
plannermodel to ADD state ( and the planner graphic to the
correct PLAN state ), but I don't know why - when on PLAN state
on the model, things just don't work.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This correctly enables the planner on the new profile,
but it doesn't triggers the correct paint on the canvas.
[Dirk Hohndel: remove other remnants of the disabled planner as well]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Only a tiny bit of poke around the contextMenuEvent - the events
of the planner are dealt by the QGraphicsItem, and this makes the
logic pretty easy to follow. :)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
[Dirk Hohndel: combined two commits into one and cleaned up some
whitespace issues]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code removed was already ported to the New Profile.
We managed to clean quite a bit. huhhy
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes mouse dragging work as it should, a tiny
bit different than the old version, but I think it's a better
way. What's missing: Keyboard actions.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The QGraphicsView system moves every selected item when the user
clicks and drags one. This patch makes a cache of all selected
items and removes the selection on them. When the user stops dragging
the Notification, the selection is restored.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit makes the planner actually work. There ar still
a few edges, but oh, joy - the new Profile gave a very unexpected
and nice addition to it - Grab the last handler of the initial
dive, and move it to the right, or get any handler, and move it
to the bottom to see what I mean.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
But it doesn't move the handlers yet, and when you confirm it you also
must click on the dive to select it or the profile will show garbage.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code adds the disconnections of temporaries. A temporary connection
is a connection that should be active only on a certain state, and we need
to clean that for the new state that will enter after.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Those two functions are important and necessary for the Planner, they
create and remove the little balls that act as handlers so the profile
can be edited with the mouse.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a signal to MainTab, that should be removed from there
when we finish the rework on the edit part, to go to the edit classes,
but in the meantime, let's keep it there.
The signal is connected to the ProfileWidget in a way that the end of the
edit will also trigger the profile to go back to ProfileState (show the
dive, if there's any) or empty Profile (if there's none).
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is highly broken in many ways - but it's the right first step.
I ported two of the most important methods from the old profile and now if
you are in add dive mode, double clicking on the new profile will
correctly add a handler on the planned dive. To see and move the handler
around, however, you need to activate the old planner.
Next step: add the handlers on the new profile.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code checked if dest and source existed before trying to call an
method on them, but dest and source are created on the constructor,
and thus, the if is dummy.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As with any other graphics object, the settings for the ruler
should be managed by the ruler, clearing up the Profile logic
and making the code easier to read.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used both preferencesChanged and settingsChanged in different
methods and classes to mean the same thing, this adds consistency.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The list of preferences that should trigger a full repaint are at the top
of this method, *if* this introduces a bug it is because some of the
preferences are not being correctly triaged yet and that needs to be
fixed. Regardless of that, now the profile will only enable / disable
the *ruler* instead of replotting everything.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The QSettings is a bit bloated on its use, so we are trying to narrow
down the amount of calls to it. We have a preferences struct, use that
instead.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
By moving the Hide/Show of the ruler to an internal method, we gain a bit
of codecleanuperism by removing a lot of unnecessary calls to their dest
and source drag-handlers.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The logic of removing the event was in the UI, and this makes
the code harder to test because we need to take into account
also the events that the interface is receiving, instead of
only relying on the algorithm to test.
so, now it lives in dive.h/.c and a unittest is easyer to make.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old code replotted the whole dive, while what we really wanted was to
show the events. so just ->show() them.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The 'Hide Similar Events' function asked the Profile to replot eveything,
only because some events were hidden from the interface. Instead of that
we can simply hide the events since the graph will be the same.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If a dive has multiple dive computers we enable a special context menu
when the user right-clicks on the dive computer name AND is not already
showing the first dive computer. In that case we offer to make the
currently shown dive computer the first one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For most users this is no change at all. For the few who download from
multiple dive computers this now shows them which of them is the primary
dive computer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
