We either pick the CNS reported by the dive computer at the end of the
dive, or the maximum of that and the CNS values in the samples, if any.
As usual, this column in the dive list defaults to off and it is
controlled by a setting in the tec page of the preferences.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now we can simply remember the state of all the preferences at the
beginning of preferences_dialog() and restore them if the user presses
'Cancel'.
Fixes#21
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the new members to the sample structure and fills them from
supported dive computers (Uemis SDA and OSTC / Shearwater Predator,
assuming you have libdivecomputer 0.3).
Save relvant values of this to the XML file and load it back. Handle the
new fields when merging dives.
At this stage we don't DO anything with this, all we do is extract them
from the dive computer, save them to the XML file and load them back.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This actually makes us internally use 'micro-degrees' for latitude and
longitude, and we never turn them into floating point either at parse
time or save time.
That said, the Uemis downloader internally does still use atof() when
converting things, which is likely a bug (locale issues and all that),
but I'll ask Dirk to check it out.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit changes the code that was recently introduced to deal with
deco ceilings. Instead of handling these through events we now store the
ceiling (which in reality is the deepest deco stop with all known dive
computers) and the stop time at that ceiling in the samples.
This also adds support for NDL (non stop dive limit) which both dive
computers that appear to give us ceiling / deco information appear to
give us as well (when the diver isn't in deco).
If the mouse hovers over the profile we now add support for displaying the
NDL, the current deco obligation and (if we are able to tell from the
data) whether we are at a safety stop.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was necessary for the Uemis downloader when we used the SDA file
format as intermediary data format and imported that as XML buffer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The initial downloader reused the XML parsing of SDA files that was
implemented early in order to support the information extracted from the
SDA with the java applet. But creating this intermediary XML file and
handing it off to the XML import function always seemed like an ugly way
to do things. This became even more obvious when adding more features to
the Uemis downloader.
This commit completely changes the downloader to instead create dives and
record them directly.
This also adds support for divespots (which are stored in a seperate
database that needs to be queried after the divelog and dive entries have
been combined - the Uemis firmware clearly was written by monkeys on
crack - oh wait: I'm trusting these same people to get the deco right?).
This commit leaves the SDA import capability in the XML parser intact.
I'll remove that later. Because of this it actually adds a few lines of
code, but the overall change will be a substantial code deletion.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This removes the tripflag name array, since it's not actually useful.
The only information we ever save in the XML file is whether a dive is
explicitly not supposed to ever be grouped with a trip ("NOTRIP"), and
everything else is implicit.
I'm going to simplify the trip flags further (possibly removing it
entirely - like I did for dive trips already), and don't like having to
maintain the tripflag_names[] array logic.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Both dives and dive trips have the same 'tripflag' thing, but they are
used very differently. In particular, for dive trips, the only case
that has any meaning is the TF_AUTOGEN case, so instead of having that
trip flag, replace it with a bitfield that says whether the trip was
auto-generated or not.
And make the one-bit bitfields explicitly unsigned. Signed bitfields
are almost always a mistake, and can be confusing.
Also remove a few now stale macros that are no longer needed now that we
don't do the GList thing for dive list handling, and our autogen logic
has been simplified.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the dive trip auto-generation a separate pass from the
showing of the dive trips, which makes things much more understandable.
It simplifies the code a lot too, because it's much more natural to
generate the automatic trip data by walking the dives from oldest to
newest (while the tree model wants to walk the other way).
It gets rid of the most annoying part of using the gtk tree model for
dive trip management, but some still remains.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It had become a write-only field (apart from some now useless debugging)
when simplifying the remove_autogen_trips() function.
So remove it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We already kept a count of dives per trip in order to figure out when
there are no more dives left and the trip needs to be freed. Now we
explicitly keep track of the list of dives associated with the trip too,
which simplifies the "find the time of the trip" logic.
We may want to sort it in time, but for now this is mainly about trying
to keep track of the divetrip relationships explicitly. I want to move
away from the whole "use the gtk tree model to keep track of things"
approach.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This simplifies the vendor/product fields into just a single "model"
string for the dive computer, since we can't really validly ever use it
any other way anyway.
Also, add 'deviceid' and 'diveid' fields: they are just 32-bit hex
values that are unique for that particular dive computer model. For
libdivecomputer, they are basically the first word of the SHA1 of the
data that libdivecomputer gives us.
(Trying to expose it in some other way is insane - different dive
computers use different models for the ID, so don't try to do some kind
of serial number or something like that)
For the Uemis Zurich, which doesn't use the libdivecomputer import, we
currently only set the model name. The computer does have some kind of
device ID string, and we could/should just do the same "SHA1 over the
ID" to give it a unique ID, but the pseudo-xml parsing confuses me, so
I'll let Dirk fix that up.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This also knows how to save and restore multiple dive computers in the
XML data, but there's no way to actually *create* that kind of
information yet (nor do we display it). Tested by creating fake XML
files with multiple dive computers by hand so far.
The dive computer information right now contains (apart from the sample
and event data that we've always had):
- the vendor and product name of the dive computer
- the date of the dive according to the dive computer (so if you change
the dive date manually, the dive computer date stays around)
Note that if the dive computer date matches the dive date, we won't
bother saving the redundant information in the XML file.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For now we only have one fixed divecomputer associated with each dive,
so this doesn't really change any current semantics. But it will make
it easier for us to associate a dive with multiple dive computers.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used to avoid some extra allocations by just allocating the dive
samples as part of the 'struct dive' allocation itself, but that ends up
complicating things, and will make it impossible to have multiple
different sets of samples (for multiple dive computers).
So stop doing it. Just allocate the dive samples array separately.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When this was first implemented the assumption was that a downloaded dive
that is to be merged with an existing dive would have the same time stamp.
But as Linus pointed out even back then, this does fail if a dive has been
merged with a download from a different dive computer before (think:
download from computer a, then download same dive from b, then improve
something in the parsing from computer a and try to redownload; the time
stamp could have changed).
This commit also fixes a silly omission in the merge_dives() function
(which ended up ALWAYS prefering the downloaded dive) and finally
implements the necessary changes to mark dives downloaded from a Uemis SDA
as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
THe Uemis SDA allows the user to set it up for salt water and fresh water
use. We should take this into consideration for the water pressure to
depth conversion.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will hopefully not be something we need often, but if we improve
support for a divecomputer (either in libdivecomputer or in our native
Uemis code or even in the way we handle (and potentially discard) events),
then it is extremely useful to be able to say "re-download things
from the divecomputer and for things that were not edited in Subsurface,
don't try to merge the data (which gives BAD results if for example you
fixed a bug in the depth calculation in libdivecomputer) but instead
simply take the samples, the events and some of the other unedited data
straight from the download".
This commit implements just that - a "force download" checkbox in the
download dialog that makes us reimport all dives from the dive computer,
even the ones we already have, and an "always prefer downloaded dive"
checkbox that then tells Subsurface not to merge but simply to take the
data from the downloaded dive - without overwriting the things we have
already edited in Subsurface (like location, buddy, equipment, etc).
This, as a precaution, refuses to merge dives that don't have identical
start times. So if you have edited the date / time of a dive or if you
have previously merged your dive with a different dive computer (and
therefore modified samples and events) you are out of luck.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This introduces the notion of merging two disjoint dives: you can select
two dives from the dive list, and if the selection is exactly two dives,
and they are adjacent (and share the same dive trip), we support the
notion of merging the dives into one dive.
The most common reason for this is an extended surface event, which made
the dive computer decide that the dive was ended, but maybe you were
just waiting for a buddy or a student at the surface, and you want to
stitch together two dives into one.
There are still details to be sorted out: my Suunto dive computers don't
actually do surface samples at the beginning or end of the dive, so when
you stitch two dives together, the profile ends up being this odd "a
couple of feet under water between the two parts of the dive" thing.
But that's an independent thing from the actual merging logic, and I'll
work on that separately.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This just re-organizes the dive merging code so that we expose a new
"merge_dives(a, b, offset)" function that merges two dives together into
one with the samples (and events) of 'b' at the specified offset after
'a'.
We'll want to use this if a dive computer has decided that the dive
ended (due to a pause at the surface), but we really want to just turn
the two computer dives into one long one with an extended surface swim.
No functional changes, but some independent cleanups due to the trip
simplifications.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't change any of the samples, we just don't plot (or consider for
dive time / mean calculations) the samples at the beginning or end of the
dive that are less than a certain threshold under water. Right now that's
an arbitrary 75cm which seems to Do The Right Thing(tm) for the dives I
tried this with - but I'm happy to look at other values if this causes
problems for people with dive computers I do not have access to.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a couple of helper functions to manage dive trips
("add_dive_to_trip()" and "remove_dive_from_trip()") and makes those
functions do the trip statistics maintenance (trip beginning times,
number of dives, etc).
This was needed because the dive merge cases for multiple dive
computers showed some rather nasty special cases: especially if the
new dive information has been loaded into an XML file with trips
auto-generated, merging several of these kinds of xml files with
multiple dives in several overlapping trips would completely confuse
our previous code.
In particular, auto-generated trips that had the exact same date as
previous trips (because they were generated from the same dive
computer) really confused the code that used the trip timestamp to
manage the trips.
Adding the helper functions allows us to get the general case right
without having to have each piece of code that handles trip
information having to bother about all the odd rules. It will
eventually also allow us to make the dive trip data structures more
logical: right now the dive trip list is largely designed around the
odd gtk model handling, rather than some more higher-level conceptual
relationship with the actual dives.
But for now, this keeps all the data structures unchanged, and just
modifies them using the new helper functions.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This requires a patched libdivecomputer that can return salinity of the
water the dive was conducted in. Experimental patches exist that implement
this for the OSTC. The code is designed so that it simply defaults to salt
water if libdivecomputer doesn't include the feature.
The patch also fixes the dive merge code to merge two other recent
additions to the dive structure (surface_pressure and visibility).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The default filename handling is broken in two different ways:
(a) if we start subsurface with a non-existing file, we warn about
the inability to read that file, and then we exit without setting the
default filename.
This is broken because it means that if the user (perhaps by mistake,
by pressing ^S) now saves the file, he will overwrite the default
filename, even though that was *not* the file we read, and *not* the
file that subsurface was started with.
So just set the default filename even for a failed file open.
The exact same logic is true of a failed parse of an XML file that we
successfully opened. We do *not* want to leave the old default
filename in place just because the XML parsing failed, and possibly
then overwriting some file that was never involved with that failure
in the first place. So just get rid of all the logic to push the
filename saving into the XML parsing layer, it has zero relevance at
that point.
(b) if we do replace the default filename with a NULL file, we need
to set that even if we cannot do a strdup() on the NULL.
This fixes both errors.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This enables plotting the ceiling in deco dives and also adds the
necessary code to the uemis importer. The only other dive computer this
has been tested with the OSTC and that needs a libdivecomputer patch in
order to provide the deco/ceiling information to Subsurface.
Fixes#5
We now throw away redundant events, just as we throw away other redundant
data coming from the dive computer. Events are considered redundant if
they are less than 61 seconds apart and identical.
This also improves the display of the remaining events in the profile as
we now show the value of the event, if it is present (for example for a
deco event we show the duration of the deepest stop).
Finally, for events that define a range (so they set the beginning flag
and assume and end flag some time later) we no loger show the triangle but
assume that some other code handles visualizing them (as happens for the
ceiling events).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dive data contains the surface pressure prior to the dive, and that is
what we need to compare p_amb_tol to, not the standard 1013mbar.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used to have very spotty logic for picking the dive trip when
merging two dives. It turns out that that spotty logic almost never
really matters, because in practice you'll never hit the situation of
merging two dives with different dive trips, but it *can* happen.
In particular, it happens when you use multiple dive computers, and
end up loading the dives from one computer on top of the dives of your
other computer. If the clocks of the dive computers was set
sufficiently close to each other, the dive merging logic will kick in
and you may now have slightly different times for the dives that get
merged, and the trip merging logic got *really* confused.
The trip management also depends on the trip dates being updated
correctly when the dives associated with a trip are updated (whether
added or removed), and the trip merging code did none of that.
This fixes it all up. Hopefully correctly.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Lubomir's commit aec904b612 broke the Add
Dive menu item: The Edit Dive dialogue didn't show up after the initial
dialogue.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Turns out we had a data field for visibility as a length unit - but never
used it. I can never guess how much visibility we actually had on a dive -
but I think most everyone can assign a rating between abysmal (zero stars,
"I couldn't read my dive computer even right in front of my mask" - trust
me, I had some of those dives) to amazing ("five stars, I could see farther
than I though possible" - and I had one or two of those, too). So I
changed this to an integer and am re-using the star infrastructure we have
for the overall dive rating.
When displaying this I was dismayed that we are running out of space in
the "Dive Notes" notbook. So I moved this to the "Dive Info" notebook.
This is not consistent and not logical. I think we need to revisit the
notebooks and think about what we want to display where.
While adding the infrastructure to manually enter the visibility I went
ahead and added the ability to manually enter the air temperature as well
(that was one of the things missing in the previous commit).
Fixes#7
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
linux.c, macos.c, windows.c now contain
subsurface_os_feature_available() that can accept an enum type
os_feature_t defined in dive.h.
The function can be useful to check if a specific global feature
is available on a certain OS version.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far we only looked in the a local subdirectory, but once Subsurface has
been installed, we don't need to change the search path for translation
files anymore.
Fixes#2
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The MacOSX applications bundle needs to be told where to bind the
text domain from.
Also copy the gettext .mo files in the install-macosx target.
[Dirk Hohndel: minor change in main(): move the path declaration to
the beginning of the function]
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a few fields that we parse, but more importantly it also tries
to dynamically decide if the sample temperatures and pressures are in
imperial or metric units.
Dirk suspects that DivingLog generally always does everything in metric,
and the reason why he has crazy sample data in imperial units (both for
pressure and temperature) may be due to a bug in the early Uemis
importer for DivingLog.
Which would actually make a lot more sense than DivingLog really being
so insane on purpose.
Anyway, Dirk's brother Jurgen seems to have everything in metric units,
which would be much saner. Maybe we should throw away the support for
insane DivingLog files entirely, since it is possible that the only use
ever of the possible source of that bug was Dirk's use of the Uemis
importer.
But for now, we end up just guessing. Current guesses:
- water temperature is below 32 dgC, so 32+ degrees is in Fahrenheit.
- tank pressures are below 400 bar, so higher values than that must be
psi.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Only files that are opened should be considered r/w. Files that are
imported should be treated as if they were r/o.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For unicode command line characters Windows uses UTF-16, while Glib
and GTK use UTF-8. To solve that we retrieve the command line
via __wgetmainargs() and use g_utf16_to_utf8() to convert each argument.
The used method should support wildcards passed as arguments
(e.g. *.xml).
Two new, OS abstracted functions appear in linux.c (NOP), macos.c (NOP),
windows.c:
subsurface_command_line_init(...)
subsurface_command_line_exit(...)
which are being called in main()
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The existing code (both my first single dive delete and then Lubomir's
multi dive delete code) had way too many issues and was just painfully
inefficient.
This new code takes a radically different approach and mostly ignores the
Gtk tree model (as that gets recreated after a delete, anyway) and instead
is linear time on the number of dives in the list. It does do its best to
maintain the existing selection and the expand state of tree model (the
latter isn't possible if we have switched to the list model).
Many thanks to "Lubomir I. Ivanov" <neolit123@gmail.com> for his work on
this - this commit actually contains a few lines out of one of the patches
that he wrote.
Reported-by: "Lubomir I. Ivanov" <neolit123@gmail.com>
Tested-by: "Lubomir I. Ivanov" <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This brings in the code to download dive information directly from a Uemis
Zurich dive computer.
The implementation contains a major hack that hooks the uemis code into
the same data structures used to setup libdivecomputer. This gives the
best result for the user, but is not something that I like as a long term
solution as it relies on internal libdivecomputer data structures.
Especially when asking non-developers for help debugging a problem it can
be extremely useful to have debugging output not go to the console but to
a log file instead.
This just adds the infrastructure to create (and close) such a file. No
changes to the debug output are made.
All this is of course #ifdef'ed out.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The "cylinders_equal()/copy_cylinders()" functions were buggered, and
only checked (and copied) the cylinder type. That was on purpose, since
you do want to be able to change the type of a cylinder without changing
the gasmix of the cylinder.
HOWEVER, the reverse is also true: you may want to change the gasmix of
a cylinder without changing the type.
So it's not that the type of the cylinder is special - it's that the
type and the gasmix should be considered separately.
Do that properly for the equipment editing case.
Reported-by: Ďoďo <dodo.sk@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If we have no explicit cylinder info at all (it's normal air, no size or
working pressure information, and no beginning/end pressure information),
we don't save the cylinders in question because that would be redundant.
Such non-saved cylinders may still show up in the equipment list because
there may be implicit mention of them elsewhere, notably due to sample
data, so not saving them is the right thing to do - there is nothing to
save.
However, we missed one case: if there were other cylinders that *did* have
explicit information in it following such an uninteresting cylinder, we do
need to save the cylinder information for the useless case - if only in
order to be able to save the non-useless information for subsequent
cylinders.
This patch does that. Now, if you had an air-filled cylinder with no
information as your first cylinder, and a 51% nitrox as your second one,
it will save that information as
<cylinder />
<cylinder o2='51.0%' />
rather than dropping the cylinder information entirely.
This bug has been there for a long time, and was hidden by the fact that
normally you'd fill in cylinder descriptions etc after importing new
dives. It also used to be that we saved the cylinder beginning/end
pressure even if that was generated from the sample data, so if you
imported from a air-integrated computer and had samples for that cylinder,
we used to save it even though it was technically redundant.
We stopped saving redundant air sample information in commit 0089dd8819
("Don't save cylinder start/end pressures unless set by hand").
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Removed start and end in save_cylinder_info(). These two variables are no
longer used.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Merge the dive trip rewrite by Dirk Hohndel.
This just merges the dive trip changes with the timestamp handling
changes. There were multiple small data conflicts, along with some
newly added 'time_t' cases in the dive trip handling that needed to be
converted to 'timestamp_t' along the way.
* 'divetrip-rewrite' of git://github.com/torvalds/subsurface:
Convert FIND_TRIP into function
Partial rewrite of the dive trip code
Check if trip is NULL before calling DIVE_TRIP
The pointer size may not be large enough to contain a timestamp, so make
FIND_TRIP() just pass the pointer to the timestamp instead.
And use an inline function instead of macros with casts. That gets us
proper type safety while at it, so that we get a warning if somebody
doesn't pass the expected "timestamp_t *". Plus the code actually looks
simpler and way more straightforward.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This helps us deal with the issue that the g_list convenience functions
don't allow us to easily compare 64bit values on 32bit architectures. And
since these convenience functions are truly trivial in nature, it seemed
easier to simply implement our own logic here.
In the process I moved all the dive_trip_list helper functions into the
same spot in divelist.c
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This introduces a new data structure for dive trips - reuseing the struct
dive just got way too messy.
The dive_trip_t datastructure now allows the code to remember if the trip
was auto generated or if its time stamp changed when dives where added to
the trip during auto generation.
The algorithm also distinguishes between dives that were intentionally
added to a trip (either in an XML file or by adding them to trip in the
UI) and dives that were added to trips via autogen. Saving dives that were
added to trips via autogen makes that assignment "intentional".
With this partial rewrite several of the oddities of the old code should
be resolved - especially turning autogen on and off again should get the
divelist back to the previous stage.
Also, when dives are merged during file open or import we now try to pick
the correct tripflag (instead of just ignoring the tripflag completely and
resetting it to TF_NONE by mistake).
Finally, the dive trip debugging code got more verbose and is trying
harder to detect issues at the earliest time possible.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the time type unambiguous, and we can use G_TYPE_INT64 for it
in the divelist too.
It also implements a portable (and thread-safe) "utc_mkdate()" function
that acts kind of like gmtime_r(), but using the 64-bit timestamp_t. It
matches our original "utc_mktime()".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thanks to Christian for running the static code analysis tool against
subsurface...
There were some false positives, a few style issues that I'll ignore for
now, and two actual potential bugs.
First: Don't check unsigned variables for < 0
This has been around for a while and we are lucky that while technically a
bug it still works as expected. Passing a negative idx simply turns it
into a very large unsigned integer which then fails the > dive_table.nr
test. So it still gets a NULL returned. A bug? Yes. Critical? No.
Mismatched allocation and free
This is an actual bug that potentially could cause issues. We allocate
memory with malloc and free it with g_free. Not good.
Reported-by: Cristian Ionescu-Idbohrn <cristian.ionescu-idbohrn@axis.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
By now the default file code seems quite matured, so in preparation for
2.0 we'll bring it back into master.
I made a few small clean-ups during the merge, but the merge itself is
very much straight forward.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Several potential problems.
- we could end up dereferencing exiting_filename when it was NULL
- we could free the default_filename by mistake -
subsurface_default_filename always needs to return a copy of it
- closing the existing file before opening a new one repopulated the
existing_filename with the default filename - preventing the opened
file to become the new existing filename
Also, make existing filename a const char * and make file_open have the
same sensible default folder behavior as the other file related functions.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This seems to make sense since we have a pretty strong concept of the "active
file" that we are working on.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Calling edit from the context menu creates a combined editing widget that
contains both dive info and equipment. When editing cylinders or
weightsystems from that widget and confirming those edits with OK those
changes were already committed to the current_dive - regardless on which
dive the user clicked. Worse, even when the user clicked Cancel in the
edit widget, any changes to the equipment stayed in effect.
This had especially confusing consequences when editing multiple dives.
As a workaround this commit adds a global edit_dive variable. This fake
dive is edited by the secondary editing widgets and if the user accepts
changes with OK then they are copied over to the current dive (or all
selected dives in multi dive editing mode).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Display yearly statistics in a statistics window with option to expand
the viewing on monthly level. The amount of dives along with basic
information like duration, depth, water temperature and air consumption
is displayed in yearly and monthly level. Thus you are able to compare
e.g. development of air consumption or diving activity from year to
year.
Using already existing macro for splitting seconds into minutes:seconds.
Moving repetitive code to a function (couldn't think of the suggested
clever macro, but this should pretty much do the trick).
Now the statistics are updated every time the process_all_dives function
is called. It might make sense to actually verify the structures need to
be re-allocated, but such optimization is currently not implemented.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Combined two commits.
Minor cleanups for white space and boolean values.
Significant changes to use the correct units for volumes vs. depths and to
avoid unneccesary lookups of the model storage based on the tree.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previously we always picked the last file that was openend as the file
name to save to. That seems counterintuitive when importing files or when
opening multiple files. Especially if Subsurface was executed without a
file on the command line and we are using the default file.
Now we only remember a file name if it was the first one to ever be
openend or if it was used in save-as.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The default file name is OS specific and tries to follow the customs on
each of the OSs. It can be configured through the preferences dialog.
On MacOS we get a strange warning which appears to be a well documented
Gtk bug on MacOS.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There is an interesting issue when adding new dives into a dive list with
existing trips. Since fill_dive_list walks the list backwards and trips
are determined by the timestamp of the first dive in a trip, it is
non-trivial to know when a dive is added if it should be part of an
existing trip or not. Let's say when we see the dive we can also see a
trip entry that starts four days earlier. Without looking forward in the
list of dives we cannot tell if this is a multi-day trip that this dive
would fit into, or if there is a break of more than tree days (our current
trip threshold).
Instead this commit adds a second scan of the dives in chronological order
that does the right thing for new dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When inserting a trip into the dive_trip_list we already check for
duplicate trips, but we still kept the additional dive_trip around.
With this change we instead replace it with the existing one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now that we can load and store trips we needed to add the capability to
manipulate those trips as well.
This commit allows us remove a dive from a trip via a right click
operation on the dive list.
The commit also adds code to split a trip into two, to merge two trips and
to create a new trip out of a top level dive.
To make all that useful this commit changes the right-click on the dive
list to identify and act on the record we are actually on (instead of
acting on the selection).
The right-click menu ("context menu") changes depending which divelist
entry the mouse pointer is on - so different operations are offered,
depending on where you are.
We also add simplistic editing of location and notes for a trip (but the
notes are never displayed so far).
To make our lives easier this commit adds a link from the dive to the dive
trip it is part of. This allowed to hugely simplify the auto trip
generation algorithm (among other things). The downside of this change is
that there are now three different ways in which we express the
relationship of dives and trips: in the dive_trip_list, in the tree_model,
and with these pointers. Somehow this screams that I should rethink my
data structures...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In preparation for the next stage of the trips handling this commit makes
the macros used to access trips (and some frequently used variables for
the tree and list models) more consistent.
This also changes the way we display un-grouped dives in the dive list,
i.e. dives that are not part of a dive trip. Their dive number is now
printed bold.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Merge the initial 'track trips explicitly' code from Dirk Hohndel.
Fix up trivial conflicts in save-xml.c due to the new 'is_attribute'
flag.
* 'trips' of git://git.hohndel.org/subsurface:
Fix an issue with trips that have dives from multiple input files
Some simple test dives for the trips code
First cut of explicit trip tracking
The existing code didn't handle the case of different trips for the same
date coming from different sources. It also got confused if the first dive
processed (which is, chronologically, the last dive) happened to be a
"NOTRIP" dive.
This commit adds a bit of debugging infrastructure for the trip handling,
too.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code establishes the explicit trip data structures and loads and
saves them in the XML data. No attempts are made to edit / modify the
trips, yet.
Loading XML files without trip data creates the trips based on timing as
before. Saving out the same, unmodified data will create 'trip' entries in
the XML file with a 'number' that reflects the number of dives in that
trip. The trip tag also stores the beginning time of the first dive in the
trip and the location of the trip (which we display in the summary entries
in the UI).
The logic allows for dives that aren't part of a dive trip. All other
dives simply belong to the "previous" dive trip - i.e. the dive trip with
the latest start time that is earlier or equal to the start time of this
dive.
This logic significantly simplifies the tracking of trips compared to
other approaches that I have tried.
The automatic grouping into trips now is an option that defaults to off
(as it makes changes to the XML file - and people who don't want this
feature shouldn't have trips added to their XML files that they then need
to manually remove).
For now you have to select this option, then exit the program and start it
again. Still to do is to trigger the trip generation at run time.
We also need a way to mark dives as not part of trips and to allow options
to combine trips, split trips, edit trip location data, etc.
The code has only had some limited testing when opening multiple files.
The code is known to fail if a location name contains unquoted special
characters like an "'".
This commit also fixes a visual inconsistency in the preferences dialog
where the font selector button didn't have a frame around it that told you
what this option was about.
Inspired-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When figuring out which cylinders to change in a multi-dive edit, we
already ignored the beginning and end pressures. But it turns out to make
more sense to also ignore the Nitrox / Helium settings.
Imagine you do a number of dives - for some reason your dive computer
records the wrong cylinder size in the downloaded logfile (like my uemis
does all the time). Dives will likely have different Nitrox percentage,
but you should still be able to simply fix the cylinder size for all dives
at once.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's an easy thing to do, but the for-loop ends up being pretty ugly, so
hide it behind the macro.
It would be even prettier with one of the (few) useful C99 features:
local for-loop variables. However, gcc needs special command line
options, and other compilers may not do it at all. So instead of doing
#define for_each_dive(_x) \
for (int _i = 0; ((_x) = get_dive(_i)) != NULL; _i++)
we require that the user declare the index iterator too, and the use
syntax becomes
for_each_dive(idx, dive) {
... use idx/dive here ...
}
And hey, maybe somebody actually will want to use the index, so maybe
that's not all bad.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The multi-dive case does fine, but the single-dive case (used when
adding a dive, for example) was somewhat confused between the dive index
(which is the location in the dive array) and the dive number.
Fix this by just passing the dive pointer instead (where NULL means to
use the current dive selection).
Reported-by: Jacco van Koll <jacco.van.koll@gmail.com>
Root-caused-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This completely changes how we keep track of selected dives: instead of
having an array listing the selection ("selectiontracker") or trusting
the gtk selection information, just save the information about whether a
dive is selected in the dive itself.
That makes it trivial to keep track of the state of selection across
group collapse/expand events, or when changing the tree view model. It
also ends up simplifying the code and logic in other ways.
HOWEVER, it does currently (re-)introduce an annoying oddity with gtk:
if you collapse a dive trip that has individual selections, gtk will
forget those selections ("out of sight, out of mind"), and when you do
*new* selections, the old hidden ones remain.
So there's some games required to make gtk do sane things. We may need
to either explicitly drop selections when collapsing trips, or make sure
the group entry gets selected when collapsing a group that has
selections in it. Or something.
There may be other issues introduced by this too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I lied in the commit message for commit 0468535524a3 ("When editing multiple
files, don't override existing equipment entries"); the changes there did
not parallel the logic for the string entries. Now I think it does.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes the bug that triggered the SIGSEGV that Linus worked around
earlier. I had forgotten to update this call path to the
edit_multi_dive_info function.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Pull dive-trip grouping from Dirk Hohndel:
"This turned into an updated pull request for the tree2 branch where I
implemented the date based grouping - but is actually a very different
topic: this adds the ability to edit multiple dives (and fixes some
issues with the dive editing overall). The reason for that is that it
reuses some of the infrastructure that I implemented in the tree2
branch for tracking the selected dives. More details in the commit
messages."
* 'tree2' of git://git.hohndel.org/subsurface:
Switch from date based to dive trip based grouping
Redo dive editing
Fix selecting and unselecting summary items
Apply sort functions to the correct model, don't select summary entries
Maintain selected rows when switching between list model and tree model
Create duplicate list model so sorting by columns works again
Improve tree model implementation
Allow date based grouping
This commit addresses two issues:
We now can add / edit / delete equipment from the edit dive dialog
We now can edit multiple dives at once
The latter feature has some interesting design constraints:
It picks the 'selected_dive' as the one to start the edit from - so if
this dive already has some information filled in, that information needs
to be overwritten before it is stored in all of the dives. Similarly, only
changes to the cylinders or weightsystems are recorded. Also, the notes
field is not editable in the multi dive edit mode (as that didn't seem
useful).
The workflow seems to work best if using the multi-edit right after
importing new dives from a dive computer. The user then can select all the
new dives and only needs to edit things like location, divemaster, buddy,
weights, etc. once.
This commit will create some obvious conflicts with the commit that adds
exposure protection tracking. It was implemented on top of the tree_view
changes as it reuses some of the infrastructure for tracking the selected
dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For simplicity and shortness, throughout subsurface exposure protection is
simply referred to as "suit".
Add the fields to the data structures, add the column to the dive_list
and the preferences dialog (once again with it being turned invisible by
default). Support loading and saving of the suit information.
Display the suit information in the Dive Info pane (this may be a bit
controversial as people could argue this should be in the Equipment pane)
and allow editing of the suit info, with our usual support for completion
and drop down lists to pick from.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the total weight carried on the dive in different weight systems
to the divelist. The column is by default not shown, which can be changed
in the preferences. The column is sortable.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was simply an omission in the current implementation. All the
plumbing was there but never got hooked up with the fixup_dive function as
intended.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Do a right-click to get a menu with the "Add dive" entry. Should do
delete too, but that's for later.
What's also apparently for later is to make this *useful*. It's the
butt-ugliest time entry field ever, and there's no way to set depth for
the dive either. So this is more of a RFC than anything truly useful.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert feet to mm, psi to mbar, and F to mkelvin. We do this elsewhere
too, but I'm going to need it for the Cochran CSV files, so let's do the
helpers now.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On Linux and MacOS the subsurface_close_conf() doesn't really close the
config file (it flushes writes on MacOS), but on Windows it does
actually close the registry hkey.
Which is bad, if you change the settings multiple times - we assume that
the config file is open the whole time.
So add a "subsurface_flush_conf()" function, and call *that* when
changing configuration parameters. And call the close function only at
the very end.
Alternatively, maybe we should just open the config file separately
every time. I don't much care, maybe somebody else does.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This interface works the same way the "edit dive" menu item does: it's a
text entry meny item on the dive text entries (ie buddy/divemaster/notes
sections). Except you pick the "Delete" entry rather than the "Edit"
entry.
It kind of works, but it really is a pretty horrible interface. I'll
need to add a top-level dive menu entry for just deleting all selected
dives instead. And it would be good to be able to get a drop-down menu
from the divelist instead of having to do it from the dive text entries,
which is just insane.
But that requires gtk work. I'm not quite ready to get back into that.
Thus the "exact same insane interface as the explicit 'Edit' mode".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull weight management from Dirk Hohndel:
"This is the fifth or sixth version of this code, I'm begining to lose
track. I still struggle with the balance between code duplication and
unnecessary indirectness and complexity. Maybe I'm just not finding
the right level of abstraction. Maybe I'm just trying too hard.
The code here is reasonably well tested. Works for me :-)
It can import DivingLog xml files with weight systems and correctly
parses those. It obviously can read and write weight systems in its
own file format. It adds a KG/lbs unit default (and correctly stores
that).
The thing I still worry about is the code in equipment.c. You'll see
that I tried to abstract things in a way that weight systems and
cylinders share quite a bit of code - but there's more very similar
code that isn't shared as my attempts to do so turned into ugly and
hard to read code. It always felt like trying to write C++ in C..."
* 'weight' of git://subsurface.hohndel.org/subsurface:
Add weight system tracking
Fix up some trivial conflicts due to various renaming of globals and
simplification in function interfaces.
- supports multiple weight systems per dive
- supports multiple weight system types
- supports import of weight as tracked by DivingLog
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We're going to eventually import non-xml files too, so let's begin
splitting the logic up.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miika fixed the statistics code that didn't properly check for the "no
cylinder info" case - this cleans it up and just uses the helper
function in equipment.c.
Rename the helper to be slightly better named while at it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This works ok-ish, but doesn't allow us to click on the stars and edit
them in the divelist, which a user might expect to be able to do - in
most "star rating UIs" you simply click on the n-th star to set that
rating. Here you need to edit the dive and pick the rating from a drop
down menu.
Minor oddity: you can actually (if you force it) write anything you want
into the star rating. But anything that isn't one of the predefined
strings simply results in a zero star rating.
Overall the UI feels a bit... forced. But I think this is quite useful
anyway.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now that the dive info window is read-only, we need to edit the dives
some other way. We bring up a dive info edit dialog when you
double-click on the dive list entry for that dive.
I do want to have an "edit" button or keyboard shortcut or something
too, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Keep the sample pressure start/end data separate from the overall
cylinder start/end data - and clean the overall cylinder start/end data
if it matches the samples exactly to avoid the redundancy.
This breaks all the SAC calculations etc, which expect the cylinder
pressures to always be in the cylinder data. I'll fix that up
separately.
The reason for this is that we really want to keep the manually entered
data separate: the pressure plotting doesn't need the confusion, and
considers end-point data (with interpolation) very different from sample
data. Also, we do not want to pollute the xml save-file with data that
is computed.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Open JDiveLog files by translating them to subsurface format using XSLT.
These files are identified by the name of the first element (JDiveLog)
and transform is applied to only these.
The XSLT feature is compiled in only if libxslt is installed. The
transformation files are installed globally in Linux under
/usr/share/subsurface/xslt. Windows and OSX still need appropriate Makefile
changes and testing.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'add-info-stats-page' of git://github.com/dirkhh/subsurface:
Add Info & Stats page to the notebook
Even more places with pressure and volume conversions
Further cleanup of pressure and volume conversions
Use unit functions to get column headers, add unit function for pressure
More consistency improvements
Add new helper function to get temperature and unit
This provides the relevant information for the currently selected dive
plus a bunch of statistics over all dives in the dive_table.
The visual design has lots of room for improvement
- right now the different fields change size
- it might be nice to have a more modern look for the entries
- the O2/He field is odd - for most divers the He value will
always be 0, so maybe we should only show He if there's at least one
dive that uses He? Also, we simply do a comma separated list of gases
for all the tanks used
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Finally getting more consistent overall in how we convert between the
different units and how we decide which units to display.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Treat SAC and OTU consistently:
- SAC is now a member of struct dive
- it's calculated / populated at the same time with a helper function with
consistent API
Create get_volume_units function that returns volumes (e.g. used in SAC
rates) based on preferred units - make sure we have these conversions just
once in the code.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Designed along the lines of get_depth_units - except we don't define a
specific number of digits to show.
Use this in the one spot we need it right now in profile.c
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
That's what gtk_init() does with gtk-specific arguments. IOW, if you do
things like
subsurface --g-fatal-warnings dives.xml
to get a real abort on gtk warnings, gtk_init needs to be able to
actually change argc/argv.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
No change at all to non-Windows builds.
Everything seems to work with preferences - but only tested on Win7
Remaining issue: displaying an icon (or the logo in the About dialog)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Right now they are displayed in one hbox which doesn't work if you have
many events - but the code itself works and correctly toggles the events
on and off.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
First step to being able to filter the events that we display in the
profile. We could (in theory) walk all the dives in the divelist when we
need this data, but it seems much more convenient to have them in an array
in one place.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way you can just type the first few characters of a location you've
been to before, and it will show you a list of possible completions.
Same for buddies and divemasters (which take the completions from a list
of people you've used before).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This way the cylinder model list will contain all the different
cylinders that we have ever seen, rather than only containing the models
that we have *edited*.
That makes it much more practical to add new dives with the same
cylinders that we've used before, because now those cylinders will show
up as cylinder models even if we haven't looked and edited the old dives
first.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Open (or adding a file name on the command line) means that this is just
one of the files that you consider part of your dive history. So dives
don't get automagically numbered and the dive_list is not considered
"changed" just because another file was opened.
Import (or adding a file on the command line after --import) means that
you are importing the content of this file to your dive history. So if the
imported file has un-numbered dives that are newer than everything else,
those get correctly renumbered. And importing marks the dive_list as
changed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When importing (or reading xml from files) new dives, we now renumber
them based on preexisting dive data, *if* such re-numbering is obvious.
NOTE! In order to be "obvious", there can be no overlap between old and
new dives: all the new dives have to come at the end. That's what
happens with a normal libdivecomputer import, since we cut the import
short when we find a preexisting dive.
But if any of the new dives overlap the old dives in any way, or already
have been numbered separately, the automatic renumbering is not done,
and you need to do a manual renumber.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We can instead 'Open' these files as they are just bastardized XML files.
This gets us back to a more consistent point where 'Import' gets data
directly from the dive computer (and hopefully soon we will add the
ability to load a dive directly from a uemis SDA to libdivecomputer),
and 'Open' loads a file from the filesystem of the computer we are
running on (this last sentence phrased so awkwardly as the uemis Zurich
SDA is a computer and presents a file system when connected via USB - it
just doesn't have the dive data in an accessible format in that file
system).
As a bonus we get to throw away quite a bit of code (the uemis specific
file handling, mini-XML parser with helper functions, the file open dialog
in the importer). Yay!
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* 'otu-tracking-v2' of git://github.com/dirkhh/subsurface:
Make OTU column invisible by default
Add OTU to divelist
Calculate OTUs for every dive
Fix up trivial conflicts in dive.h (due to dive event handling also
adding a field to the dive structure)
Parse them, save them, take them from libdivecomputer.
This doesn't merge them or show them in the profile yet, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The calculation assumes that the cylinderindex in each sample tells us
which PO2 the dive was breathing at that time. This needs to be verified
with dives where there is an actual gas switch.
No idea where to display them, yet. Far fewer people will care about this
than care about SAC - does this still rate a spot in the dive_list?
I guess I could make it part of the dive_info - but it's not editable.
It doesn't seem to fit with the equipment page (even though this is the
one editable field that is related - nitrox %)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* 'quit-handling' of git://github.com/dirkhh/subsurface:
Use the last (or only) filename on command line as default for saving
Show the "save changes" dialog before the main window is destroyed
Check for changes at regular 'quit' events as well
Catch changes to the info of the current dive when quitting
Tracking changes to tanks is trivial
Simplistic first attempt to get changes saved when quitting subsurface
Use the actual degree sign for temperatures (°F and °C), and make sure
everything uses the proper "set_source_rgb[a]()" wrappers to set the
colors.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The following are UI toolkit specific:
gtk-gui.c - overall layout, main window of the UI
divelist.c - list of dives subsurface maintains
equipment.c - equipment / tank information for each dive
info.c - detailed dive info
print.c - printing
The rest is independent of the UI:
main.c i - program frame
dive.c i - creates and maintaines the internal dive list structure
libdivecomputer.c
uemis.c
parse-xml.c
save-xml.c - interface with dive computers and the XML files
profile.c - creates the data for the profile and draws it using cairo
This commit should contain NO functional changes, just moving code around
and a couple of minor abstractions.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It got removed by some of my overly aggressive cleanup in commit
fefcbf125e ("Remove dive info frame") because the dive info frame
initialization also initialized the main window title..
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Even though we go down to an 8pt font the info_frame changes size when the
air info is added. I don't like this but want to see how Linus would like
this resolved before going overboard.
Minor tweaks to the formating (we don't need two decimals when printing
the liters of air consumed).
This patch does NOT remove the plot of the air information in the profile
graph. I think we want to remove that once we like the text where it is,
but I wanted to do one thing at a time.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Sadly, no way to show them yet. But it would be nice to let people
enter them (and it would be doubly nice to have a dive computer that
does it at the surface), and then perhaps just do the "point browser at
google maps" thing.
Saving/parsing tested by hand-feeding the location of Enenui (Molokini
Crater) from google maps by hand into my divelog.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I have it in some of my notes, and Dirk seems to fill that in too, so
let's just show it, save it, and allow editing of it..
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
So this actually reports the dive data that libdivecomputer generates.
It doesn't import special events etc, but neither do we for the xml
importer.
It is also slow as heck, since it doesn't try to do the "hey, I already
have this dive" logic and always imports everything, but the basics are
definitely there.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We're going to start to want to allocate dives and samples for the
libdivecomputer import too, so let's clean things up a bit for that.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
libdivecomputer already uses 'gasmix_t' for its own gasmix thing. I
don't like th eway we step on each others name spaces, but hey, might as
well just use 'struct gasmix' and avoid the typedef.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we change units, we need to flush any currently active dive
information in the old units, and then carefully reload it in the new
units.
Otherwise crazy stuff happens - like having current cylinder working
pressure values that are in PSI because that *used* to be the output
unit, but then interpreting those values as BAR, because we changed the
units.
Also, since we now properly import working pressure from Diving Log,
stop importing the (useless) cylinder description. The Diving Log
cylinder descriptions are things like "Alu" or "Steel". We're better
off just making up our own.
Finally, since Diving Log has cylinder size in metric, make sure that we
do the "match standard cylinder sizes" *after* we've done all the
cylinder size conversions to proper units.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some people want to know how many dives they have under their belt, so
let's save and restore the dive number if it exists.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make it about general equipment management, and start hooking up
functions to show new equipment information when changing dives (and to
flush changes to equipment information for the previously active dive).
Nothing is hooked up yet, and it's now showing just one (really big)
cylinder choice, so this is all broken. But it should make it possible
to at least get somewhere some day.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This should take care of it all, unless I missed some case.
Now we should just save the default units somewhere, and I should do the
divelist update much cleaner (instead of re-doing the divelist entirely,
it should just repaint it - now we lose the highlited dive etc).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This doesn't actually *do* anything yet, but it introduces the notion of
output units, and allows you to pick metric or imperial.
Of course, since the output doesn't currently care, the units you pick
are irrelevant. But just wait..
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Doing per-dive cylinder start/end pressures is insane, when we can have
up to eight cylinders. The cylinder start/end pressure cannot be per
dive, it needs to be per cylinder.
This makes the save format cleaner too, we have all the cylinder data in
just one place.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is some seriously crazy stuff. Instead of making sense as a
divelog, the uemis xml makes more sense as a "dive computer settings
dump".
And I guess I can see why they'd do that. But it makes parsing it just
incredibly annoying. The thing is more of a "these are the
configurations I support as a dive computer thing" than a "this was the
tank you were diving with".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
.. and sort based on the 'time_t' value itself.
This allows us to use a more compact date format that doesn't need to
sort alphabetically, because sorting by date is always based on the date
value. So we can use just a two-digit year, and skip the seconds, to
keep the column narrow, while still sorting correctly.
Also, "Depth" is a nice header string, but it is wider than the column
itself, which makes the whole column wider than necessary. So put the
units in the header instead of in the string, keeping things narrow.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
So we don't want to save working pressure, but cylinder type knowledge
would be lovely and useful. And we can probably make a good initial
guess, or at least let people fill it in later.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of just tracking gasmix, track the size and workng pressure of
the cylinder too.
And use "cylinder" instead of "tank" throughout.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now the dive profile plot *really* needs some units. The pressure is
just a random line otherwise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If given multiple dives at the same time, just de-dup the dives. This
happens when you've dumped the whole dive-computer several times, and
some dives show up in multiple dumps.
When de-duping, try to avoid dropping data. So if one dive has notes
attached to it, and the other one does not, pick the notes from the dive
that does have them. Obvious stuff like that.
The sample merge is also written so that it should be possible to merge
two dives. Which we don't actually do yet.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This just generates another xml file. Don't get me wrong: I still don't
like xml, but this way we can save in the same format we load things
from. Except the save-format is a *lot* cleaner than the abortion that
is Suunto or libdivecomputer xml.
Don't bother with some crazy xml library crap for saving. Just do it!
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The only thing you can do with that thing is screw things up (like
libdivecomputer did). There's no value in tracking the "filler" gas,
since you can always just calculate it from the gases that actually
matter.
So just track Oxygen and Helium - and make sure they have sane values.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The suunto xml is just completely crazy. What's the helium percentage
companion to "o2pct"? Would it be "hepct"? No. It's "hepct_0".
Ok, so they didn't number the first o2pct, which could be seen as sane:
that's the only mix value that should always exist. And they clearly
started their indexing with 0. So with multiple mixes, you'd then
expect "o2pct_1" and "hepct_1", right?
Wrong! Because XML people are crazy, the second O2 mix percentage is
obviously "o2pct_2". So the O2 percentages are one-based, with an
implicit one. But the He percentages are zero-based with an explicit
zero. So the second mix is "o2pct_2" and "hepct_1".
I'd like to ask what drugs Suunto people are on, but hey, it's a Finnish
company. No need to ask. Vodka explains everything. LOTS AND LOTS OF
VODKA.
In comparison, the libdivecomputer output is nice and sane, and uses a
'gasmix' node. Of course, now we have so many different XML nesting
nodes to check that I just made it an array of different noces. That
also allows me to mark the suunto case, so that we only do the "check
for crazy alcoholic xml entries" when it's a suunto file.
The "type of file" thing is probably a good idea for deciding on default
units too. Some day.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I'm going to add a menu to import (and eventually export) dives, and so
we'd like to be able to start out with no dives at all. Right now we
croak if that happens - it's not like the code has been written with
actual end users in mind.
So start cleaning things up. First make the 'current_dive' macro work
right even for invalid dives.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The name is a string containint date, time, depth and length. So it's
useful even with nothing else going on.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The dive parser should eventually be just a part of the program, not the
whole thing. So start preparing for that.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
