This implicitly accessed the global divelog. Most of the users were
in the test/ folder anyway. Replace by explicit accesses to the
global divelog.dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a messy commit, because the "qPref" system relies
heavily on QString, which means lots of conversions between
the two worlds. Ultimately, I plan to base the preferences
system on std::string and only convert to QString when
pushing through Qt's property system or when writing into
Qt's settings.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a humongous commit, because it touches all parts of the
code. It removes the last user of our horrible TABLE macros, which
simulate std::vector<> in a very clumsy way.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Nothing against free-standing functions, but in the case
of dc_watertemp(), dc_airtemp(), endtime() and totaltime(),
it seems natural to move this into the dive class and avoid
polution of the global name space.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was a plain pointer owing to C compatibility.
Replacing it by a unique_ptr<> allows us to make it
'self-desctruct' in the constructor. However, we do this
with a special twist: the data is _not_ copied when copying
the dive, since the copied dive is not registered in the fulltext
system. Hackish, but it should(!) work.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This had to be done simultaneously, because the table macros
do not work properly with C++ objects.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since struct divecomputer is now fully C++ (i.e. cleans up
after itself), we can simply turn the list of divecomputers
into an std::vector<>. This makes the code quite a bit simpler,
because the first divecomputer was actually a subobject.
Yes, this makes the common case of a single divecomputer a
little bit less efficient, but it really shouldn't matter.
If it does, we can still write a special std::vector<>-
like container that keeps the first element inline.
This change makes pointers-to-divecomputers not stable.
So always access the divecomputer via its index. As
far as I can tell, most of the code already does this.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a rather long commit, because it refactors lots of the event
code from pointer to value semantics: pointers to entries in an
std::vector<> are not stable, so better use indexes.
To step through the event-list at diven time stamps, add *_loop classes,
which encapsulate state that had to be manually handled before by
the caller. I'm not happy about the interface, but it tries to
mirror the one we had before.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the name of an event is not incorporated into the even
structure anymore, we don't need these shenanigans. Just assign
the event name.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a hairy one, because the sample code is rather tricky.
There was a pattern of looping through pairs of adjacent samples,
for interpolation purposes. Add an range adapter to generalize
such loops.
Removes the finish_sample() function: The code would call
prepare_sample() to start parsing of samples and then
finish_sample() to actuall add it. I.e. a kind of commit().
Since, with one exception, all users of prepare_sample()
called finish_sample() in all code paths, we might just add
the sample in the first place. The exception was sample_end()
in parse.cpp. This brings a small change: samples are now
added, even if they could only be parsed partially. I doubt
that this makes any difference, since it will only happen
for broken divelogs anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This allows us to use non-C member variables. Convert a number
of pointers to unique_ptr<>s.
Code in uemis-downloader.cpp had to be refactored, because
it mixed owning and non-owning pointers. Mad.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a long commit, because it introduces a new abstraction:
a general std::vector<> of std::unique_ptrs<>.
Moreover, it replaces a number of pointers by C++ references,
when the callee does not suppoert null objects.
This simplifies memory management and makes ownership more
explicit. It is a proof-of-concept and a test-bed for
the other core data structrures.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To my understanding, declaring empty parameter lists using "(void)"
is an artifact from the bad old K&R times, when functions were
declared without(!) parameters. Which in hindsight was an absolute
recipe for disaster. So for backwards compatibility, functions
without parameters had to be declared using "(void)" as "()"
could also mean "any function".
That was 40 years ago. Meanwhile, C++ introduced references,
which made it a necessity to declare the function parameters.
So "(void)" is redundant and inconsistent in C++ code and
just makes no sense.
Remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the taxonomy is now a real C++ struct with constructor
and destructor, dive_site has to be converted to C++ as well.
A bit hairy for now, but will ultimately be distinctly simpler.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently editing of planned dives that have been merged with actual
(logged) dives only works if the 'Planned dive' divecomputer is the
first divecomputer, and this divecomputer is selected when clicking
'Edit planned dive'. In other cases the profile of the first
divecomputer is overlaid with the profile of the planned dive, and the
first divecomputer's profile is overwritten when saving the dive plan.
Fix this problem.
Triggered by @SeppoTakalo's comment (https://github.com/subsurface/subsurface/issues/1913#issuecomment-2075562119): Users don't like that planned dives show up as their own entries in the dive list, so being able to merge them with the actual dive after it has been executed is a good feature - but this wasn't working well until now.
Signed-off-by: Michael Keller <github@ike.ch>
Fix the filters for planned (i.e. has at least one dive plan attached)
and logged (i.e. has at least one dive computer log attached) dives.
Also refactor the respective functions for improved readability.
Signed-off-by: Michael Keller <github@ike.ch>
Fix the configuration of the deco ceilings in the mobile version:
- make the settings work;
- remove reading of the dive computer ceiling from git;
- hide the gradient factor in the profile when the calculated ceiling is
not shown;
- when the calculated ceiling is disabled in the settings, disable
editing of the gradient factor.
Signed-off-by: Michael Keller <github@ike.ch>
This tries to encapsulate the management of the current dive and
divecomputer in the selection code. The current dive is alreay
set by setSelection(). Add a new parameter to also set the
current divecomputer. If -1 is passed, then the current
computer number is remained. This will allow us to audit the code.
Because for now, the whole "current dive computer" thing seems
to be ill-defined.
This fixes a bug: the dive-computer number wasn't validated
when making a new dive the current dive. The new code has some
drawbacks though: when selecting a whole trip, the validation
will be called for all dives in the trip and thus the dive computer
number will depend on the dive with the lowest amount of dive
computers in the trip. This will need to be fixed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When a dive has both real dive computers as well as at
least a planned version (which is just another dive
computer with a special name), only use the data from
real dive computers for aggregate values like maxdepth,
dive time, average depth etc in order not to have
imagined data on the dive list, statistics etc.
Macro-magic-provided-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
There were only three users of that. For now do it inline, but
we may think about a separate function, which is only available
on desktop.
Moreover, add nullptr-checks, even if they are not strictly
necessary.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive was passed as an argument to update_event_name(), but
the divecomputer was derived from the global dc_number variable.
That makes no sense. Therefore, pass the dc_number as argument
and update the only caller (smtk-import).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In general, replace "dive master" by "dive guide".
However, do not change written dive logs for now. On reading,
accept both versions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The D in MOD, EAD, END, and EADD stands for "depth" and
as such these should be mm in int rather than double.
The intermediate fn2 and fhe2, however, as intermediate
value should not be rounded to an integer.
The upshot of this is a litle more numerical stability.
It should lead to more stable values in TestProfile
when run on architectures with different floating
point precision.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
We want to prevent the user from accidentally deleting a
cylinder with sensor readings. Therefore, we need such a
function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is adding the capability to select 'Dive number' and 'Date / Time'
in the 'Copy dive components' dialog, and then copy them into the
clipboard.
When using 'Paste dive components, these values will then be pasted into
the selected dive(s).
This is intended to help with workflows that import dive information
from two different sources, like general information from another
logging program, and CCR ppO2 sensor readings from a unit log, and then
stitch them together into one cohesive entry with all data per dive.
Copied data is also output into formatted text when pasting the
clipboard outside of the application:
```
Dive number: 401
Date / time: Sun 2 May 2021 12:00 AM
```
No translations have been added as of now - I could not find any
information on how strings are translated for this project.
Signed-off-by: Michael Keller <github@ike.ch>
Instead of accessing the global displayed_dive variable,
pass the dive to the various profile items. This is a
step in making the profile code reentrant.
This removes the last user of the displayed_dc macro,
which can now be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Don't access the global displayed_dive variable in an effort
to make the profile reentrant.
Note that this still accesses the global dc_number variable,
which will likely have to be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Weirdly, this function was declared in dive.h and defined in
subsurface-startup.c. Let's move declaration and definition to
more appropriate places, viz. subsurface-time.h and time.c.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
in_planner() is problematic, since it is uses desktop-only
application state. Since the cylinder-model already has
an appropriate inPlanner flag, use this instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If source files want to access preferences functions, they should
include pref.h themselves.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
