If we find something that looks like a known BT dive computer, set
things up so that we can use it later. If multiple dive computers are
found, simply use the first.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far all this does is list all the BT devices that it finds
(and I worry if this will have negative battery implications
on a mobile device), but this should allow us to connect to
a standard BT dive computer (but that will of course require
more code to pick the right device).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Once we re-inserted the dive in the list we aren't done, quite the
contrary - we now need to make sure that we handle any other changes
and mark the dive list as updated.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to set the timeSpec after the QDateTime was parsed,
otherwise it gets converted to localtime again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We already have that for the other three fields where we offer auto
completion (buddy, divemaster, suit).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to make sure we don't render the initial profiles with the
wrong scale on devices, we need to seed the device pixel ratio with the
device default and then update it once the window has been created.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For CCR dives we want to display the setpoint and pO2 information,
due to the limited screensize we have to remove the temperature graph or
the view will be to cluttered.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
We were doing the right thing switching from metric to imperial, but in
order to swtich back you had to restart. Now it works both ways.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There is no need to have two variables for the same purpose.
[Dirk Hohndel: changed to keep the two separate functions as otherwise
we no longer parse existing repos successfully]
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows the user to enter multiple buddies as a comma separated list,
the "Multiple Buddies" entry is still a special case as we can only populate
the combobox with a single name for each entry.
fixes#168
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
When editing adive in Subsurface-mobile we can only handle one buddy
due to the limitations of the combobox. To prevent loss of data when editing
a dive with more than one buddy we display "Multiple Buddies" in the buddy
field. This creates a special case where no changes are written to the buddy field
unless the user changes buddy for that dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the option to select a cylinder when adding or editing a dive.
Due to limited screen size we restrict the editing to the first cylinder only.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Subsurface uses "local time" which in particular means we never
display time zone information to the user. The user (and our file
format) only sees times like 5pm or 17:00. A better name than
local time (which could mean "local at the dive spot) would
be "watch time", the time displayed by the diver's watch when
she entered the water.
Internally, we store times as time_t, seconds since Jan 1 1970 0:00
UTC. Our convention for conversion between 5pm and time_t as always
been to treat 5pm as if it were UTC.
Then confusion arose since Qt's QDateTime (which is tied to UI elements
like QTimeEdit and similar) is time zone aware and by default assumes
the system time zone. So when we set a QDateTime to 5pm and then later
convert it to time_t we have to take care about the difference between
UTC and the system time zone.
This patch unifies our solution to this problem: With it, we set all
QDateTime's time zone to UTC. This means we don't have to correct for
a time zone anymore when converting to time_t (note, however, the
signedness issue: Qt's idea of time_t is broken since it assumes it
to be unsigned thus not allowing for dates before 1970. Better use the
millisecont variants).
We only need to be careful about time zones when using the current time.
With this convention, when assigning the current time to a QDateTime, we
need to shift for the time zone since its value in UTC should actually be
the watch time of the user who is most likely used to the system time zone.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we run the backend to verify credentials without waiting for it to
finish, the redirect might happen before we know if the credentials are
invalid, unverified or verified - which will cause us to give the wrong
information to the user.
Yes, this additional wait is annoying, but I can't come up with a better
way to do this and avoid incorrect information. At least the UI isn't hung
while we wait.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to get autocomplete to work on manual dive add
we apparently need a separate init function.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With offline the default now, we need to force a connection at least once
so that the repos are in sync. And then of course we need to return to the
correct state, regardless on whether this connection succeeded or failed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since saving checks if there are changes, we have to always mark the dive
list as changed before asking for the changes to be saved.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is rather simplistic, it just imports the local data into the remote
repository and therefore loses the git history of the local data - but I
wasn't able to make the git merge without shared base commit work, so I
went this much easier to implement route instead.
One thing we need to be careful about is that contacting the remote server
could fail. If we don't manage to merge the dives from cloud server and
local storage, we need to revery to no cloud status in order not to lose
the local data.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes sure that if the user switches to offline mode they don't get
incorrect notifications that tell them that they are accessing cloud
storage.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This exposes a locationServiceAvailable property to QML and keeps it in
sync with the corresponding state in the GpsLocation widget.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I couldn't figure out how to break this down into small, useful commits.
Part of the problem is that I kept going while working on this and as you
can see from looking at the commit, diff tries so hard to find small code
fragments that moved around, that the diff overall becomes quite
unreadable and it seemed impossible to recreate the sequence of steps
after the fact.
It all started with adding the parsing for the GPS coordinates. But while
testing that code I found several issues with the rest of the function.
Most importantly it seemed ridiculous that we carefully tried to match the
texts that the DiveObjectHelper would create for the various fields,
instead of just using the DiveObjectHelper to do just that. And once I had
converted that I once again realized just how long and hard to understand
that function was getting and decided to break out some of the more
complex parts into their own helper functions.
But of course all this didn't happen in this logical, structured, ordered
way. Instead I did all of these things at the same time, testing,
rearranging, etc.
So in the end I went with one BIG commit that does all of this in one fell
swoop.
This adds four helper functions to deal with start time/date, duration,
location and gps coordinates, and depth of the dive.
To avoid mistakes when dealing with the GPS coordinates, there's another
helper to encapsulate the creation of the dive site and we switched to a
current GPS location.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There were several logical flaws here. Ugh.
Don't save things if there are no unsaved changes, if we haven't
initialized this repository from the cloud or if we are already saving
things.
Then, once we decide that we should save, first always save to the local
cache and then check if we should save to the cloud and do so if
requested.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
