Add a column to the equipment table that shows if a sensor is attached to a
tank, or which sensors would be available to attach to a tank that currently
doesn't have a pressure sensor associated with it.
Changing the sensor assignement can be undone.
This column is hidden by default as this is a somewhat unusual activity.
Signed-off-by: Michael Andreen <michael@andreen.dev>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Dive data are stored internally using integral types using
appropriately fine units (mm, mbar, mkelvin, etc.). These
are converted with functions defined in units.h for display
(m, bar, C, etc.). Usually floating points are returned by
these functions, to retain the necessary precision. There
is one exception: the to_PSI() and mbar_to_PSI() functions.
For consistency, make these functions likewise return floats.
This will be needed for the rework of the profile-axes.
The plan is to use the conversion functions to make the
axes aware of the displayed values. This in turn will be
necessary to place the ticks at sensible distances. However,
the conversions need to be precise, which is not the
case for the current to_PSI() functions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Rendering resets the size, which now recalculates the axes.
Therefore, plotDive() must be called. The callers were doing
the opposite: call plotDive() first, then draw().
To make it easier for the callers, present a single interface
that handles these subtleties.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of using the interactive ProfileWidget2, just
use the ProfileScene to render the profile for printing,
export and mobile. One layer (QWidget) less.
This removes all the kludges for handling DPR on mobile.
Thus, the rendering will now be off and have to be fixed
by redoing the scaling code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since using separate profile-instances for print/export,
we never exit print mode. Therefore, the mode parameter
can be removed. This is a preparatory commit for passing
the printMode at construction time.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Not having to readjust the scale on-demand will make the
code distinctly simpler. Let's just pass it once.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Very annoyingly, to render the profile for printing / export,
the profile still had to be show()n, thus requiring a parent
window.
Analysis of qmlprofile.c showed that this was due to the
transformation matrix not being properly set up on non-show()n
scenes.
Instead, we can simply render via the QGraphicsScene
(circumventing the QGraphicsView).
The code was factored out into the ProfileWidget2::draw()
function. This will hopefully make it easier to change
the size-code of the profile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In analogy to normal printing, don't misuse the mainwindow's
profile widget to do the printing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In cb80ff746b internal columns
were added to the cylinder model. These were not hidden in
the planner. Nobody complained?
Remove this clutter from the UI by hiding the columns.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When printing the plan, a print-dialog was created with "new",
but not freed later. Strictly speaking, this is not a leak,
because the dialog is attached to the main-window in Qt's
object hierarchy. Thus it is freed on application exit. On
the other hand, it is a leak in the sense that resources are
pointlessly hogged until application exit.
Let's just turn it into a stack-allocated object.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only external user of setRecalc() was turning recalculation
on. In fact, this happened when constructing the planner-widget.
However, for example editing of the profile only works when
the recalc flag is on.
This is all very confusing, let's just turn the flag on by
default and remove the accessor. Internally, the planner can
simply use the std::exchange function to set and reset the
recalc flag.
Perhaps the setting/resetting can be replaced by simple
recalc = true;
...
recalc = false;
pairs. It is unclear whether there is need for recursion.
Something to be investigated.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Remove mainwindow-access from the planner, by setting
the profile to planner state in the owner of the profile,
viz. the MainWindow.
The MainWindow sets the application state to planner, so
it seems legit that it also sets the profile state.
This removes a further interdependency.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
So far the profile operated on the global displayed_dive. Instead,
take the dive to be displayed as a parameter to the plotDive()
functions.
This is necessary if we want to have multiple concurrent
profile objects. Think for example for printing or for mobile
where multiple dive objects are active at the same time.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To remove global state, make the dive that DivePlannerModel
works on a member variable. Pass the dive in createSimpleDive()
and loadFromDive(). Moreover, this should pave the way to more
fine-grained undo in the planner. Ultimately, the planner
should not be modal.
Attention: for now, the dive must still be displayed_dive,
because of the convoluted way in which the profile and the
planner work on the same dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Both loadFromDive() callers were clearing the model before
calling loadFromDive(). Move the clearing into that function
since it makes no sense to load into a non-cleared model.
Apparently this changes the way that no-cylinder dives are
treated and the code in ProfileWidget2::repositionDiveHandlers()
must now explicitly check for that condition.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When clicking on "+" in the planner, a default stop point was
added using a signal/slot connection. This used the archaic
string-based connect syntax, because it was realized with
default parameters passed to "addStop()". Instead, add a
"addDefaultStop()" slot, which passes the default parameters.
Since all other callers do not use callbacks, unslotify
"addStop()". The slot was the only user of the default parameters,
so they can be removed alltogether.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The way the starting time of a new plan was set was bonkers:
1) PlannerWidgets::planDive() invokes DivePlannerPointsModel::
createSimpleDive().
2) createSimpleDive() calls DivePlannerPointsModel::
setupStartTime()
3) setupStartTime() emits a signal startTimeChanged()
4) startTimeChanged is caught by PlannerWidget and sets
the UI field
5) change of the UI field emits a timeChanged() signal which
is connected to DivePlannerPointsModel::setStartTime()
6) setStartTime() sets the time of the plan and displayed_dive
and emits dataChanged()
7) dataChanged() replots the dive()
8) Back in DivePlannerPointsModel::createSimpleDive() the diveplan
start time is overwritten with displayed_dive (the value are
equal owing to 6)
Wow!
But it gets worse:
9) The initial dive plan is set up in createSimpleDive().
Since the profile is drawn in 7) after clearing the displayed_dive
and before constructing the initial plan, the profile is shown
on a dive without samples. It therefore generates a dummy profile.
To make this somewhat less insane, remove the startTimeChanged()
signal in 3), explicitly set the start time of plan and dive to
the one calculated by setupStartTime() and explicitly set the UI
filed in the plannerWidget.
This still indirectly draws the profile via signals in a convoluted
way, but at it straightens out things somewhat. Most importantly,
the profile doesn't have to generate a fake DC.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These are the small dots that describe dragable points on
the profile when in the planner. It makes no sense to have
them in desktop's planner-widget code. They belong to the
profile.
Therefore, move the code there and compile on mobile.
Not everything can be compiled on mobile for now, but it
is a start.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function, which removes the handlers from the profile, was called
in setAddState() but not in setPlanState(). In the latter case it was
called explicitly by the caller.
Move the call from the caller into the function. This allows us to
make clearHandlers() private in to the profile widget.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Around 2015 there was a push to move planner UI code from
mainwindow.cpp to diveplanner.cpp. That never was completed,
presumably because the planner is actually three widgets.
Collect these widgets in one PlannerWidgets class and move
the code there.
This is not a full dis-entanglement, as the plannerwidgets
have to access the profile via the mainwindow. But at least
it collects the planner UI code at a single place.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
So far, the PreferencesDialog emitted a settingsChanged signal.
This meant that models that listened to that signal had to
conditionally compile out the code for mobile or the connection
had to be made in MainWindow.
Instead, introduce a global signal that does this and move
the connects to the listeners to remove inter-dependencies.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Using non-sensical depth and times for segments in the planner may
lead to an unresponsive UI. Therefore limit depth to 1000 m/3300 ft
and time to 100 h. Limiting of depth is done in settingsChanged()
since it has to adapt to the user changig their preferred units.
Fixes#2762.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The SAC factor is only used for minimal gas calculations which
don't make sense in the CCR context.
Additionally, make bailout stop for at least minimum switch
time or problem solving time.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
In the planner we used to filter out "unused" cylinders as in the
equipment tab. It is unclear whether that makes sense or can even
easily be reproduced, since such cylinders have to come from an
imported dive.
To be on the save side, let's not do this. Replace the
CylindersFilteredModel introduced recently by a plain
CylindersModel.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The cylinder-model had an instance() function, but actually
there were two cylinder models: one used by the equipment tab,
one used by the planner.
This is misleading. Therefore, remove the instance() function
and make the cylinder-model a subobject of the planner-model.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When the show_unused_cylinders flag is not set, the cylinder tables
in the equipment tab and the planner should not show unused cylinders.
However, the code in CylindersModel is fundamentally broken if the
unused cylinders are not at the end of the list: The correct number
of cylinders is shown, but not the correct cylinders.
Therefore, add a higher-level CylindersModelFiltered model on top
of CylindersModel that does the actual filtering. Some calls are
routed through to the base model (notably those that take indexes,
as these have to be mapped), for some calls the caller has to get
access to the source model first. We might want to adjust this.
For filtering, reuse the already existing show_cylinder function
and export it via CylindersModel.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The whole point of having X::instance() functions is to solve
the infamous "Static Initialization Order Fiasco": When having
global objects in different translation units, their order
of initialization is undefined. Thus, when these objects access
each other one cannot guarantee the correct order of
initialization. The X::instance() functions generate the objects
on first use.
DivePlannerPointsModel has such an instance() function. However,
for convenience(?) in diveplanner.cpp we find the global variable
static DivePlannerPointsModel* plannerModel =
DivePlannerPointsModel::instance();
Thus, the DivePlannerPointsModel constructor is run before main(),
negating the whole purpose of the instance() function.
Let's remove this line to avoid hard-to-debug startup issues.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Usually, we use PascalCase (i.e. camelCase with a capital
letter at the start) for class names. For consistency, let's
do it here as well.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This class contains only static functions (i.e. it does not contain
any state). There does not seem to be a reason to have an instance
of that class. Therefore, remove the instance() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add surface_segment to plannerShared and then
update desktop-widgets.
Signed-off-by: jan Iversen <jan@casacondor.com>
desktop-widgets: use plannerShared for surface_segment
Change getter/setter for surface_segment to plannerShared, in
order to share the conversion with mobile diveplanner
Signed-off-by: jan Iversen <jan@casacondor.com>
Move conversion cuft <-> liter from desktop-widget/diveplanner.cpp
to plannerShared, to facilitate the same results in mobile
diveplanner
Use Backend for bottomsac/decosac and update to check
for switch LITER <-> CUFT
Add bottomsac/decosac to QMLinterface.
Signed-off-by: jan Iversen <jan@casacondor.com>
Variables without conversion, do not need to pass plannerShared
(due to the QML interface).
Simple variables do not pass plannerShared, but diveplanner
in desktop-widgets and qmlinterface in mobile-widgets call the
implementation directly.
Signed-off-by: jan Iversen <jan@casacondor.com>
Make notes rates available to QML through the Backend interface.
Remove the corresponding variables from plannerShared.
Getters are from prefs. while setters are linked to diveplan model.
Remark: signals from qPrefDivePlanner is used, because the diveplanner model
sets qPrefDivePlanner but do not issue special signals.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Change ascent/descent setter function names to set_<name>Display
to show the value is prepared for displaying (common for desktop and QML).
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The spinboxes are already connected to diveplannermodel set_ functions, remove
second connect to plannerShared.
Change get functions to use diveplannermodel.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The last SIGNAL/SLOT cannot be converted due to a limitation in the
new connect() syntax, it does not "understand" default parameters.
Signed-off-by: jan Iversen <jan@casacondor.com>
Change connect for QAbstractButton::clickedto new syntax.
Change connect for QDialogButtonBox::accepted/rejected to new syntax.
Signed-off-by: Jan Iversen <jan@casacondor.com>
